1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
|
From 84c4e27d24e8563945d5a3cdc922467051770986 Mon Sep 17 00:00:00 2001
From: James Hughes <james.hughes@raspberrypi.org>
Date: Thu, 31 Oct 2019 14:39:44 +0000
Subject: [PATCH] net:phy:2711 Allow ethernet LED mode to be set via
device tree
Add device tree entries and code to allow the specification of
the lighting modes for the LED's on the ethernet connector.
Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
net:phy:2711 Change the default ethernet LED actions
This should return default behaviour back to that of previous
releases.
---
drivers/net/phy/broadcom.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -316,6 +316,9 @@ static void bcm54xx_adjust_rxrefclk(stru
static int bcm54xx_config_init(struct phy_device *phydev)
{
int reg, err, val;
+ u32 led_modes[] = {BCM_LED_MULTICOLOR_LINK_ACT,
+ BCM_LED_MULTICOLOR_LINK};
+ struct device_node *np = phydev->mdio.dev.of_node;
reg = phy_read(phydev, MII_BCM54XX_ECR);
if (reg < 0)
@@ -371,10 +374,10 @@ static int bcm54xx_config_init(struct ph
bcm54xx_phydsp_config(phydev);
+ of_property_read_u32_array(np, "led-modes", led_modes, 2);
+
/* For non-SFP setups, encode link speed into LED1 and LED3 pair
* (green/amber).
- * Also flash these two LEDs on activity. This means configuring
- * them for MULTICOLOR and encoding link/activity into them.
* Don't do this for devices on an SFP module, since some of these
* use the LED outputs to control the SFP LOS signal, and changing
* these settings will cause LOS to malfunction.
@@ -385,8 +388,8 @@ static int bcm54xx_config_init(struct ph
bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
val = BCM_LED_MULTICOLOR_IN_PHASE |
- BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
- BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
+ BCM5482_SHD_LEDS1_LED1(led_modes[0]) |
+ BCM5482_SHD_LEDS1_LED3(led_modes[1]);
bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
}
|
