aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm27xx/patches-4.19/950-0812-overlays-Add-ssd1306-spi-overlay-3440.patch
blob: e27893d9acc18339f3076779344824fec05abdf8 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
From db048a80e63c66607b3bd73fa641802ec83bf166 Mon Sep 17 00:00:00 2001
From: MikeDK <m.kaplan@evva.com>
Date: Fri, 31 Jan 2020 10:57:21 +0100
Subject: [PATCH] overlays: Add ssd1306-spi overlay (#3440)

Add an overlay for SSD1306 based OLED boards using SPI.
This will load the staging fbtft driver.

Signed-off-by: Michael Kaplan <m.kaplan@evva.com>
---
 arch/arm/boot/dts/overlays/Makefile           |  1 +
 arch/arm/boot/dts/overlays/README             | 12 +++
 .../boot/dts/overlays/ssd1306-spi-overlay.dts | 82 +++++++++++++++++++
 3 files changed, 95 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -168,6 +168,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	spi6-1cs.dtbo \
 	spi6-2cs.dtbo \
 	ssd1306.dtbo \
+	ssd1306-spi.dtbo \
 	superaudioboard.dtbo \
 	sx150x.dtbo \
 	tc358743.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -2428,6 +2428,18 @@ Params: address                 Location
         https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
 
 
+Name:   ssd1306-spi
+Info:   Overlay for SSD1306 OLED via SPI using fbtft staging driver.
+Load:   dtoverlay=ssd1306-spi,<param>=<val>
+Params: speed                   SPI bus speed (default 10000000)
+        rotate                  Display rotation (0, 90, 180 or 270; default 0)
+        fps                     Delay between frame updates (default 25)
+        debug                   Debug output level (0-7; default 0)
+        dc_pin                  GPIO pin for D/C (default 24)
+        reset_pin               GPIO pin for RESET (default 25)
+        height                  Display height (32 or 64; default 64)
+
+
 Name:   superaudioboard
 Info:   Configures the SuperAudioBoard sound card
 Load:   dtoverlay=superaudioboard,<param>=<val>
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts
@@ -0,0 +1,82 @@
+/*
+ * Device Tree overlay for SSD1306 based SPI OLED display
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&spi0>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&spidev0>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@2 {
+		target = <&spidev1>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@3 {
+		target = <&gpio>;
+		__overlay__ {
+			ssd1306_pins: ssd1306_pins {
+                                brcm,pins = <25 24>;
+                                brcm,function = <1 1>; /* out out */
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&spi0>;
+		__overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ssd1306: ssd1306@0{
+				compatible = "solomon,ssd1306";
+				reg = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&ssd1306_pins>;
+
+				spi-max-frequency = <10000000>;
+				bgr = <0>;
+				bpp = <1>;
+				rotate = <0>;
+				fps = <25>;
+				buswidth = <8>;
+				reset-gpios = <&gpio 25 0>;
+				dc-gpios = <&gpio 24 0>;
+				debug = <0>;
+
+				solomon,height = <64>;
+				solomon,width = <128>;
+				solomon,page-offset = <0>;
+			};
+		};
+	};
+
+	__overrides__ {
+		speed		= <&ssd1306>,"spi-max-frequency:0";
+		rotate		= <&ssd1306>,"rotate:0";
+		fps		= <&ssd1306>,"fps:0";
+		debug		= <&ssd1306>,"debug:0";
+		dc_pin		= <&ssd1306>,"dc-gpios:4>";
+		reset_pin	= <&ssd1306>,"reset-gpios:4>";
+		height		= <&ssd1306>,"solomon,height:0>";
+	};
+};