path: root/target/linux/bcm27xx/patches-4.19/950-0099-Tidy-up-of-the-ft5406-driver-to-use-DT-2189.patch

From 67acc12c996ef55038206de9e4220e69bf8dd517 Mon Sep 17 00:00:00 2001
From: James Hughes <JamesH65@users.noreply.github.com>
Date: Thu, 16 Nov 2017 15:56:17 +0000
Subject: [PATCH] Tidy up of the ft5406 driver to use DT (#2189)

Driver was using a fixed resolution, this commit
adds touchscreen size, and coordinate flip and swap
features via device tree overlays.

Adds overrides so the VC4 can adjust the DT parameters
appropriately; there is a newer version of the VC4 side
driver that can now set up the appropriate DT values
if required.

Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
---
 drivers/input/touchscreen/rpi-ft5406.c | 218 ++++++++++++++++---------
 1 file changed, 145 insertions(+), 73 deletions(-)

--- a/drivers/input/touchscreen/rpi-ft5406.c
+++ b/drivers/input/touchscreen/rpi-ft5406.c
@@ -1,7 +1,7 @@
 /*
  * Driver for memory based ft5406 touchscreen
  *
- * Copyright (C) 2015 Raspberry Pi
+ * Copyright (C) 2015, 2017 Raspberry Pi
  *
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,7 +9,6 @@
  * published by the Free Software Foundation.
  */
 
-
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
@@ -21,11 +20,15 @@
 #include <linux/kthread.h>
 #include <linux/platform_device.h>
 #include <linux/stddef.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/dma-mapping.h>
 #include <soc/bcm2835/raspberrypi-firmware.h>
 
 #define MAXIMUM_SUPPORTED_POINTS 10
+#define FTS_TOUCH_DOWN      0
+#define FTS_TOUCH_UP        1
+#define FTS_TOUCH_CONTACT   2
+
 struct ft5406_regs {
 	uint8_t device_mode;
 	uint8_t gesture_id;
@@ -35,85 +38,125 @@ struct ft5406_regs {
 		uint8_t xl;
 		uint8_t yh;
 		uint8_t yl;
-		uint8_t res1;
-		uint8_t res2;
+		uint8_t pressure; /* Not supported */
+		uint8_t area;     /* Not supported */
 	} point[MAXIMUM_SUPPORTED_POINTS];
 };
 
-#define SCREEN_WIDTH  800
-#define SCREEN_HEIGHT 480
+/* These are defaults if the DT entries are missing */
+#define DEFAULT_SCREEN_WIDTH  800
+#define DEFAULT_SCREEN_HEIGHT 480
 
 struct ft5406 {
-	struct platform_device * pdev;
-	struct input_dev       * input_dev;
-	void __iomem           * ts_base;
-	dma_addr_t		 bus_addr;
-	struct task_struct     * thread;
+	struct platform_device	*pdev;
+	struct input_dev	*input_dev;
+	void __iomem		*ts_base;
+	dma_addr_t		bus_addr;
+	struct task_struct	*thread;
+
+	uint16_t	max_x;
+	uint16_t	max_y;
+	uint8_t		hflip;
+	uint8_t		vflip;
+	uint8_t		xyswap;
 };
 
 /* Thread to poll for touchscreen events
- * 
+ *
  * This thread polls the memory based register copy of the ft5406 registers
  * using the number of points register to know whether the copy has been
- * updated (we write 99 to the memory copy, the GPU will write between 
+ * updated (we write 99 to the memory copy, the GPU will write between
  * 0 - 10 points)
  */
+#define ID_TO_BIT(a) (1 << a)
+
 static int ft5406_thread(void *arg)
 {
 	struct ft5406 *ts = (struct ft5406 *) arg;
 	struct ft5406_regs regs;
 	int known_ids = 0;
-	
-	while(!kthread_should_stop())
-	{
-		// 60fps polling
+
+	while (!kthread_should_stop()) {
+		/* 60fps polling */
 		msleep_interruptible(17);
 		memcpy_fromio(&regs, ts->ts_base, sizeof(struct ft5406_regs));
-		iowrite8(99, ts->ts_base + offsetof(struct ft5406_regs, num_points));
-		// Do not output if theres no new information (num_points is 99)
-		// or we have no touch points and don't need to release any
-		if(!(regs.num_points == 99 || (regs.num_points == 0 && known_ids == 0)))
-		{
+		iowrite8(99,
+			 ts->ts_base +
+			 offsetof(struct ft5406_regs, num_points));
+
+		/*
+		 * Do not output if theres no new information (num_points is 99)
+		 * or we have no touch points and don't need to release any
+		 */
+		if (!(regs.num_points == 99 ||
+		    (regs.num_points == 0 && known_ids == 0))) {
 			int i;
 			int modified_ids = 0, released_ids;
-			for(i = 0; i < regs.num_points; i++)
-			{
-				int x = (((int) regs.point[i].xh & 0xf) << 8) + regs.point[i].xl;
-				int y = (((int) regs.point[i].yh & 0xf) << 8) + regs.point[i].yl;
-				int touchid = (regs.point[i].yh >> 4) & 0xf;
-				
-				modified_ids |= 1 << touchid;
 
-				if(!((1 << touchid) & known_ids))
-					dev_dbg(&ts->pdev->dev, "x = %d, y = %d, touchid = %d\n", x, y, touchid);
-				
-				input_mt_slot(ts->input_dev, touchid);
-				input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 1);
+			for (i = 0; i < regs.num_points; i++) {
+				int x = (((int) regs.point[i].xh & 0xf) << 8) +
+					regs.point[i].xl;
+				int y = (((int) regs.point[i].yh & 0xf) << 8) +
+					regs.point[i].yl;
+				int touchid = (regs.point[i].yh >> 4) & 0xf;
+				int event_type = (regs.point[i].xh >> 6) & 0x03;
 
-				input_report_abs(ts->input_dev, ABS_MT_POSITION_X, x);
-				input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, y);
+				modified_ids |= ID_TO_BIT(touchid);
 
+				if (event_type == FTS_TOUCH_DOWN ||
+				    event_type == FTS_TOUCH_CONTACT) {
+					if (ts->hflip)
+						x = ts->max_x - 1 - x;
+
+					if (ts->vflip)
+						y = ts->max_y - 1 - y;
+
+					if (ts->xyswap)
+						swap(x, y);
+
+					if (!((ID_TO_BIT(touchid)) & known_ids))
+						dev_dbg(&ts->pdev->dev,
+							"x = %d, y = %d, press = %d, touchid = %d\n",
+							x, y,
+							regs.point[i].pressure,
+							touchid);
+
+					input_mt_slot(ts->input_dev, touchid);
+					input_mt_report_slot_state(
+							ts->input_dev,
+							MT_TOOL_FINGER,
+							1);
+
+					input_report_abs(ts->input_dev,
+							 ABS_MT_POSITION_X, x);
+					input_report_abs(ts->input_dev,
+							 ABS_MT_POSITION_Y, y);
+				}
 			}
 
 			released_ids = known_ids & ~modified_ids;
-			for(i = 0; released_ids && i < MAXIMUM_SUPPORTED_POINTS; i++)
-			{
-				if(released_ids & (1<<i))
-				{
-					dev_dbg(&ts->pdev->dev, "Released %d, known = %x modified = %x\n", i, known_ids, modified_ids);
+			for (i = 0;
+			     released_ids && i < MAXIMUM_SUPPORTED_POINTS;
+			     i++) {
+				if (released_ids & (1<<i)) {
+					dev_dbg(&ts->pdev->dev,
+						"Released %d, known = %x, modified = %x\n",
+						i, known_ids, modified_ids);
 					input_mt_slot(ts->input_dev, i);
-					input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, 0);
-					modified_ids &= ~(1 << i);
+					input_mt_report_slot_state(
+							ts->input_dev,
+							MT_TOOL_FINGER,
+							0);
+					modified_ids &= ~(ID_TO_BIT(i));
 				}
 			}
 			known_ids = modified_ids;
-			
+
 			input_mt_report_pointer_emulation(ts->input_dev, true);
 			input_sync(ts->input_dev);
 		}
-			
 	}
-	
+
 	return 0;
 }
 
@@ -122,13 +165,14 @@ static int ft5406_probe(struct platform_
 	int err = 0;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-	struct ft5406 * ts;
+	struct ft5406 *ts;
 	struct device_node *fw_node;
 	struct rpi_firmware *fw;
 	u32 touchbuf;
-	
+	u32 val;
+
 	dev_info(dev, "Probing device\n");
-	
+
 	fw_node = of_parse_phandle(np, "firmware", 0);
 	if (!fw_node) {
 		dev_err(dev, "Missing firmware node\n");
@@ -151,7 +195,8 @@ static int ft5406_probe(struct platform_
 		return -ENOMEM;
 	}
 
-	ts->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->bus_addr, GFP_KERNEL);
+	ts->ts_base = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->bus_addr,
+					  GFP_KERNEL);
 	if (!ts->ts_base) {
 		pr_err("[%s]: failed to dma_alloc_coherent(%ld)\n",
 				__func__, PAGE_SIZE);
@@ -164,17 +209,22 @@ static int ft5406_probe(struct platform_
 				    &touchbuf, sizeof(touchbuf));
 
 	if (err || touchbuf != 0) {
-		dev_warn(dev, "Failed to set touchbuf, trying to get err:%x\n", err);
+		dev_warn(dev, "Failed to set touchbuf, trying to get err:%x\n",
+			 err);
 		dma_free_coherent(dev, PAGE_SIZE, ts->ts_base, ts->bus_addr);
 		ts->ts_base = 0;
 		ts->bus_addr = 0;
 	}
 
 	if (!ts->ts_base) {
-		dev_warn(dev, "set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n", err, touchbuf, ts->ts_base, ts->bus_addr);
-
-		err = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF,
-				    &touchbuf, sizeof(touchbuf));
+		dev_warn(dev,
+		"set failed, trying get (err:%d touchbuf:%x virt:%p bus:%x)\n",
+		err, touchbuf, ts->ts_base, ts->bus_addr);
+
+		err = rpi_firmware_property(
+				fw,
+				RPI_FIRMWARE_FRAMEBUFFER_GET_TOUCHBUF,
+				&touchbuf, sizeof(touchbuf));
 		if (err) {
 			dev_err(dev, "Failed to get touch buffer\n");
 			goto out;
@@ -188,11 +238,10 @@ static int ft5406_probe(struct platform_
 
 		dev_dbg(dev, "Got TS buffer 0x%x\n", touchbuf);
 
-		// mmap the physical memory
+		/* mmap the physical memory */
 		touchbuf &= ~0xc0000000;
 		ts->ts_base = ioremap(touchbuf, sizeof(struct ft5406_regs));
-		if (ts->ts_base == NULL)
-		{
+		if (ts->ts_base == NULL) {
 			dev_err(dev, "Failed to map physical address\n");
 			err = -ENOMEM;
 			goto out;
@@ -200,22 +249,46 @@ static int ft5406_probe(struct platform_
 	}
 	platform_set_drvdata(pdev, ts);
 	ts->pdev = pdev;
-	
+
 	ts->input_dev->name = "FT5406 memory based driver";
-	
+
+	if (of_property_read_u32(np, "touchscreen-size-x", &val) >= 0)
+		ts->max_x = val;
+	else
+		ts->max_x = DEFAULT_SCREEN_WIDTH;
+
+	if (of_property_read_u32(np, "touchscreen-size-y", &val) >= 0)
+		ts->max_y = val;
+	else
+		ts->max_y = DEFAULT_SCREEN_HEIGHT;
+
+	if (of_property_read_u32(np, "touchscreen-inverted-x", &val) >= 0)
+		ts->hflip = val;
+
+	if (of_property_read_u32(np, "touchscreen-inverted-y", &val) >= 0)
+		ts->vflip = val;
+
+	if (of_property_read_u32(np, "touchscreen-swapped-x-y", &val) >= 0)
+		ts->xyswap = val;
+
+	dev_dbg(dev,
+		"Touchscreen parameters (%d,%d), hflip=%d, vflip=%d, xyswap=%d",
+		ts->max_x, ts->max_y, ts->hflip, ts->vflip, ts->xyswap);
+
 	__set_bit(EV_KEY, ts->input_dev->evbit);
 	__set_bit(EV_SYN, ts->input_dev->evbit);
 	__set_bit(EV_ABS, ts->input_dev->evbit);
 
 	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X, 0,
-			     SCREEN_WIDTH, 0, 0);
+			     ts->xyswap ? ts->max_y : ts->max_x, 0, 0);
 	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y, 0,
-			     SCREEN_HEIGHT, 0, 0);
+			     ts->xyswap ? ts->max_x : ts->max_y, 0, 0);
 
-	input_mt_init_slots(ts->input_dev, MAXIMUM_SUPPORTED_POINTS, INPUT_MT_DIRECT);
+	input_mt_init_slots(ts->input_dev,
+			    MAXIMUM_SUPPORTED_POINTS, INPUT_MT_DIRECT);
 
 	input_set_drvdata(ts->input_dev, ts);
-	
+
 	err = input_register_device(ts->input_dev);
 	if (err) {
 		dev_err(dev, "could not register input device, %d\n",
@@ -223,10 +296,9 @@ static int ft5406_probe(struct platform_
 		goto out;
 	}
 
-	// create thread to poll the touch events
+	/* create thread that polls the touch events */
 	ts->thread = kthread_run(ft5406_thread, ts, "ft5406");
-	if(ts->thread == NULL)
-	{
+	if (ts->thread == NULL) {
 		dev_err(dev, "Failed to create kernel thread");
 		err = -ENOMEM;
 		goto out;
@@ -254,9 +326,9 @@ static int ft5406_remove(struct platform
 {
 	struct device *dev = &pdev->dev;
 	struct ft5406 *ts = (struct ft5406 *) platform_get_drvdata(pdev);
-	
+
 	dev_info(dev, "Removing rpi-ft5406\n");
-	
+
 	kthread_stop(ts->thread);
 
 	if (ts->bus_addr)
@@ -265,7 +337,7 @@ static int ft5406_remove(struct platform
 		iounmap(ts->ts_base);
 	if (ts->input_dev)
 		input_unregister_device(ts->input_dev);
-	
+
 	return 0;
 }