path: root/target/linux/avr32/patches/100-git_sync.patch

diff -urN linux-2.6.24.3/arch/avr32/boards/atngw100/Kconfig avr32-2.6/arch/avr32/boards/atngw100/Kconfig
--- linux-2.6.24.3/arch/avr32/boards/atngw100/Kconfig	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/boards/atngw100/Kconfig	2008-04-23 19:33:28.000000000 +0200
@@ -0,0 +1,12 @@
+# NGW100 customization
+
+config BOARD_ATNGW100_I2C_GPIO
+	bool "Use GPIO for i2c instead of built-in TWI module"
+	help
+	  The driver for the built-in TWI module has been plagued by
+	  various problems, while the i2c-gpio driver is based on the
+	  trusty old i2c-algo-bit bitbanging engine, making it work
+	  on pretty much any setup.
+
+	  Choose 'Y' here if you're having i2c-related problems and
+	  want to rule out the i2c bus driver.
diff -urN linux-2.6.24.3/arch/avr32/boards/atngw100/setup.c avr32-2.6/arch/avr32/boards/atngw100/setup.c
--- linux-2.6.24.3/arch/avr32/boards/atngw100/setup.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/boards/atngw100/setup.c	2008-04-23 20:12:35.000000000 +0200
@@ -20,7 +20,7 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap7000.h>
+#include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
 #include <asm/arch/portmux.h>
@@ -37,11 +37,16 @@
 static struct spi_board_info spi0_board_info[] __initdata = {
 	{
 		.modalias	= "mtd_dataflash",
-		.max_speed_hz	= 10000000,
+		.max_speed_hz	= 8000000,
 		.chip_select	= 0,
 	},
 };
 
+static struct mci_platform_data __initdata mci0_data = {
+	.detect_pin	= GPIO_PIN_PC(25),
+	.wp_pin		= GPIO_PIN_PE(0),
+};
+
 /*
  * The next two functions should go away as the boot loader is
  * supposed to initialize the macb address registers with a valid
@@ -124,6 +129,7 @@
 	}
 };
 
+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
 static struct i2c_gpio_platform_data i2c_gpio_data = {
 	.sda_pin		= GPIO_PIN_PA(6),
 	.scl_pin		= GPIO_PIN_PA(7),
@@ -139,6 +145,7 @@
 		.platform_data	= &i2c_gpio_data,
 	},
 };
+#endif
 
 static int __init atngw100_init(void)
 {
@@ -157,6 +164,7 @@
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 
 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+	at32_add_device_mci(0, &mci0_data);
 	at32_add_device_usba(0, NULL);
 
 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
@@ -165,11 +173,15 @@
 	}
 	platform_device_register(&ngw_gpio_leds);
 
+#ifdef CONFIG_BOARD_ATNGW100_I2C_GPIO
 	at32_select_gpio(i2c_gpio_data.sda_pin,
 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
 	at32_select_gpio(i2c_gpio_data.scl_pin,
 		AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
 	platform_device_register(&i2c_gpio_device);
+#else
+	at32_add_device_twi(0, NULL, 0);
+#endif
 
 	return 0;
 }
diff -urN linux-2.6.24.3/arch/avr32/boards/atstk1000/atstk1000.h avr32-2.6/arch/avr32/boards/atstk1000/atstk1000.h
--- linux-2.6.24.3/arch/avr32/boards/atstk1000/atstk1000.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/boards/atstk1000/atstk1000.h	2008-04-23 19:33:28.000000000 +0200
@@ -12,4 +12,6 @@
 
 extern struct atmel_lcdfb_info atstk1000_lcdc_data;
 
+void atstk1000_setup_j2_leds(void);
+
 #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
diff -urN linux-2.6.24.3/arch/avr32/boards/atstk1000/atstk1002.c avr32-2.6/arch/avr32/boards/atstk1000/atstk1002.c
--- linux-2.6.24.3/arch/avr32/boards/atstk1000/atstk1002.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/boards/atstk1000/atstk1002.c	2008-04-23 20:12:35.000000000 +0200
@@ -11,7 +11,6 @@
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/string.h>
 #include <linux/types.h>
@@ -22,7 +21,7 @@
 
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/arch/at32ap7000.h>
+#include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
 #include <asm/arch/portmux.h>
@@ -49,18 +48,16 @@
 	},
 };
 
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 0,
 	.shortname	= "AVR32 STK1000 external DAC",
 };
 #endif
-#endif
 
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
 static struct spi_board_info spi0_board_info[] __initdata = {
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
 	{
 		/* AT73C213 */
 		.modalias	= "at73c213",
@@ -80,12 +77,25 @@
 };
 #endif
 
-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
 static struct spi_board_info spi1_board_info[] __initdata = { {
 	/* patch in custom entries here */
 } };
 #endif
 
+static struct cf_platform_data __initdata cf0_data = {
+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
+	.detect_pin	= CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
+	.reset_pin	= CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
+#else
+	.detect_pin	= GPIO_PIN_NONE,
+	.reset_pin	= GPIO_PIN_NONE,
+#endif
+	.vcc_pin	= GPIO_PIN_NONE,
+	.ready_pin	= GPIO_PIN_PB(27),
+	.cs		= 4,
+};
+
 /*
  * The next two functions should go away as the boot loader is
  * supposed to initialize the macb address registers with a valid
@@ -141,68 +151,8 @@
 	clk_put(pclk);
 }
 
-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
-
-static struct gpio_led stk_j2_led[] = {
-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
-#define LEDSTRING "J2 jumpered to LED8"
-	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
-	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
-	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
-	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
-	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
-	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
-	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
-	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
-			.default_trigger = "heartbeat", },
-#else	/* RGB */
-#define LEDSTRING "J2 jumpered to RGB LEDs"
-	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
-	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
-	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
-
-	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
-			.default_trigger = "heartbeat", },
-	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
-	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
-			.default_trigger = "heartbeat", },
-	/* PB16, PB30 unused */
-#endif
-};
-
-static struct gpio_led_platform_data stk_j2_led_data = {
-	.num_leds	= ARRAY_SIZE(stk_j2_led),
-	.leds		= stk_j2_led,
-};
-
-static struct platform_device stk_j2_led_dev = {
-	.name		= "leds-gpio",
-	.id		= 2,	/* gpio block J2 */
-	.dev		= {
-		.platform_data	= &stk_j2_led_data,
-	},
-};
-
-static void setup_j2_leds(void)
-{
-	unsigned	i;
-
-	for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
-		at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
-
-	printk("STK1002: " LEDSTRING "\n");
-	platform_device_register(&stk_j2_led_dev);
-}
-
-#else
-static void setup_j2_leds(void)
-{
-}
-#endif
-
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-static void __init at73c213_set_clk(struct at73c213_board_info *info)
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+static void __init atstk1002_setup_extdac(void)
 {
 	struct clk *gclk;
 	struct clk *pll;
@@ -220,7 +170,7 @@
 	}
 
 	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
-	info->dac_clk = gclk;
+	at73c213_data.dac_clk = gclk;
 
 err_set_clk:
 	clk_put(pll);
@@ -229,12 +179,16 @@
 err_gclk:
 	return;
 }
-#endif
-#endif
+#else
+static void __init atstk1002_setup_extdac(void)
+{
+
+}
+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
 
 void __init setup_board(void)
 {
-#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
 #else
 	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
@@ -271,7 +225,7 @@
 
 	at32_add_system_devices();
 
-#ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
 #else
 	at32_add_device_usart(0);
@@ -281,12 +235,16 @@
 #ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
 #endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
 #endif
-#ifdef CONFIG_BOARD_ATSTK1002_SPI1
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
+	at32_add_device_twi(0, NULL, 0);
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+	at32_add_device_mci(0, NULL);
+#endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
@@ -294,18 +252,23 @@
 			     fbmem_start, fbmem_size);
 #endif
 	at32_add_device_usba(0, NULL);
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-	at32_add_device_ssc(0, ATMEL_SSC_TX);
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
+	at32_add_device_ac97c(0);
+#else
+	at32_add_device_abdac(0);
 #endif
-
-	setup_j2_leds();
-
-#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
-#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
-	at73c213_set_clk(&at73c213_data);
+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+	at32_add_device_ssc(0, ATMEL_SSC_TX);
 #endif
+	at32_add_device_cf(0, 2, &cf0_data);
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
+	at32_add_device_psif(0);
+	at32_add_device_psif(1);
 #endif
 
+	atstk1000_setup_j2_leds();
+	atstk1002_setup_extdac();
+
 	return 0;
 }
 postcore_initcall(atstk1002_init);
diff -urN linux-2.6.24.3/arch/avr32/boards/atstk1000/atstk1003.c avr32-2.6/arch/avr32/boards/atstk1000/atstk1003.c
--- linux-2.6.24.3/arch/avr32/boards/atstk1000/atstk1003.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/boards/atstk1000/atstk1003.c	2008-04-23 20:12:35.000000000 +0200
@@ -0,0 +1,185 @@
+/*
+ * ATSTK1003 daughterboard-specific init code
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <linux/spi/at73c213.h>
+#include <linux/spi/spi.h>
+
+#include <asm/setup.h>
+
+#include <asm/arch/at32ap700x.h>
+#include <asm/arch/board.h>
+#include <asm/arch/init.h>
+#include <asm/arch/portmux.h>
+
+#include "atstk1000.h"
+
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+static struct at73c213_board_info at73c213_data = {
+	.ssc_id		= 0,
+	.shortname	= "AVR32 STK1000 external DAC",
+};
+#endif
+
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+static struct spi_board_info spi0_board_info[] __initdata = {
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+	{
+		/* AT73C213 */
+		.modalias	= "at73c213",
+		.max_speed_hz	= 200000,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_1,
+		.platform_data	= &at73c213_data,
+	},
+#endif
+	/*
+	 * We can control the LTV350QV LCD panel, but it isn't much
+	 * point since we don't have an LCD controller...
+	 */
+};
+#endif
+
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+static struct spi_board_info spi1_board_info[] __initdata = { {
+	/* patch in custom entries here */
+} };
+#endif
+
+static struct cf_platform_data __initdata cf0_data = {
+#ifdef CONFIG_BOARD_ATSTK1000_CF_HACKS
+	.detect_pin	= CONFIG_BOARD_ATSTK1000_CF_DETECT_PIN,
+	.reset_pin	= CONFIG_BOARD_ATSTK1000_CF_RESET_PIN,
+#else
+	.detect_pin	= GPIO_PIN_NONE,
+	.reset_pin	= GPIO_PIN_NONE,
+#endif
+	.vcc_pin	= GPIO_PIN_NONE,
+	.ready_pin	= GPIO_PIN_PB(27),
+	.cs		= 4,
+};
+
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+static void __init atstk1003_setup_extdac(void)
+{
+	struct clk *gclk;
+	struct clk *pll;
+
+	gclk = clk_get(NULL, "gclk0");
+	if (IS_ERR(gclk))
+		goto err_gclk;
+	pll = clk_get(NULL, "pll0");
+	if (IS_ERR(pll))
+		goto err_pll;
+
+	if (clk_set_parent(gclk, pll)) {
+		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
+		goto err_set_clk;
+	}
+
+	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at73c213_data.dac_clk = gclk;
+
+err_set_clk:
+	clk_put(pll);
+err_pll:
+	clk_put(gclk);
+err_gclk:
+	return;
+}
+#else
+static void __init atstk1003_setup_extdac(void)
+{
+
+}
+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
+
+void __init setup_board(void)
+{
+#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
+#else
+	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
+#endif
+	/* USART 2/unused: expansion connector */
+	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
+
+	at32_setup_serial_console(0);
+}
+
+static int __init atstk1003_init(void)
+{
+	/*
+	 * ATSTK1000 uses 32-bit SDRAM interface. Reserve the
+	 * SDRAM-specific pins so that nobody messes with them.
+	 */
+	at32_reserve_pin(GPIO_PIN_PE(0));	/* DATA[16]	*/
+	at32_reserve_pin(GPIO_PIN_PE(1));	/* DATA[17]	*/
+	at32_reserve_pin(GPIO_PIN_PE(2));	/* DATA[18]	*/
+	at32_reserve_pin(GPIO_PIN_PE(3));	/* DATA[19]	*/
+	at32_reserve_pin(GPIO_PIN_PE(4));	/* DATA[20]	*/
+	at32_reserve_pin(GPIO_PIN_PE(5));	/* DATA[21]	*/
+	at32_reserve_pin(GPIO_PIN_PE(6));	/* DATA[22]	*/
+	at32_reserve_pin(GPIO_PIN_PE(7));	/* DATA[23]	*/
+	at32_reserve_pin(GPIO_PIN_PE(8));	/* DATA[24]	*/
+	at32_reserve_pin(GPIO_PIN_PE(9));	/* DATA[25]	*/
+	at32_reserve_pin(GPIO_PIN_PE(10));	/* DATA[26]	*/
+	at32_reserve_pin(GPIO_PIN_PE(11));	/* DATA[27]	*/
+	at32_reserve_pin(GPIO_PIN_PE(12));	/* DATA[28]	*/
+	at32_reserve_pin(GPIO_PIN_PE(13));	/* DATA[29]	*/
+	at32_reserve_pin(GPIO_PIN_PE(14));	/* DATA[30]	*/
+	at32_reserve_pin(GPIO_PIN_PE(15));	/* DATA[31]	*/
+	at32_reserve_pin(GPIO_PIN_PE(26));	/* SDCS		*/
+
+	at32_add_system_devices();
+
+#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+	at32_add_device_usart(1);
+#else
+	at32_add_device_usart(0);
+#endif
+	at32_add_device_usart(2);
+
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+#endif
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+	at32_add_device_mci(0, NULL);
+#endif
+	at32_add_device_usba(0, NULL);
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
+	at32_add_device_ac97c(0);
+#else
+	at32_add_device_abdac(0);
+#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+	at32_add_device_ssc(0, ATMEL_SSC_TX);
+#endif
+	at32_add_device_cf(0, 2, &cf0_data);
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
+	at32_add_device_psif(0);
+	at32_add_device_psif(1);
+#endif
+
+	atstk1000_setup_j2_leds();
+	atstk1003_setup_extdac();
+
+	return 0;
+}
+postcore_initcall(atstk1003_init);
diff -urN linux-2.6.24.3/arch/avr32/boards/atstk1000/atstk1004.c avr32-2.6/arch/avr32/boards/atstk1000/atstk1004.c
--- linux-2.6.24.3/arch/avr32/boards/atstk1000/atstk1004.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/boards/atstk1000/atstk1004.c	2008-04-23 20:12:35.000000000 +0200
@@ -0,0 +1,156 @@
+/*
+ * ATSTK1003 daughterboard-specific init code
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <linux/spi/at73c213.h>
+#include <linux/spi/spi.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+
+#include <asm/arch/at32ap700x.h>
+#include <asm/arch/board.h>
+#include <asm/arch/init.h>
+#include <asm/arch/portmux.h>
+
+#include "atstk1000.h"
+
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+static struct at73c213_board_info at73c213_data = {
+	.ssc_id		= 0,
+	.shortname	= "AVR32 STK1000 external DAC",
+};
+#endif
+
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+static struct spi_board_info spi0_board_info[] __initdata = {
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+	{
+		/* AT73C213 */
+		.modalias	= "at73c213",
+		.max_speed_hz	= 200000,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_1,
+		.platform_data	= &at73c213_data,
+	},
+#endif
+	{
+		/* QVGA display */
+		.modalias	= "ltv350qv",
+		.max_speed_hz	= 16000000,
+		.chip_select	= 1,
+		.mode		= SPI_MODE_3,
+	},
+};
+#endif
+
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+static struct spi_board_info spi1_board_info[] __initdata = { {
+	/* patch in custom entries here */
+} };
+#endif
+
+#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
+static void __init atstk1004_setup_extdac(void)
+{
+	struct clk *gclk;
+	struct clk *pll;
+
+	gclk = clk_get(NULL, "gclk0");
+	if (IS_ERR(gclk))
+		goto err_gclk;
+	pll = clk_get(NULL, "pll0");
+	if (IS_ERR(pll))
+		goto err_pll;
+
+	if (clk_set_parent(gclk, pll)) {
+		pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n");
+		goto err_set_clk;
+	}
+
+	at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
+	at73c213_data.dac_clk = gclk;
+
+err_set_clk:
+	clk_put(pll);
+err_pll:
+	clk_put(gclk);
+err_gclk:
+	return;
+}
+#else
+static void __init atstk1004_setup_extdac(void)
+{
+
+}
+#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */
+
+void __init setup_board(void)
+{
+#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+	at32_map_usart(0, 1);	/* USART 0/B: /dev/ttyS1, IRDA */
+#else
+	at32_map_usart(1, 0);	/* USART 1/A: /dev/ttyS0, DB9 */
+#endif
+	/* USART 2/unused: expansion connector */
+	at32_map_usart(3, 2);	/* USART 3/C: /dev/ttyS2, DB9 */
+
+	at32_setup_serial_console(0);
+}
+
+static int __init atstk1004_init(void)
+{
+	at32_add_system_devices();
+
+#ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+	at32_add_device_usart(1);
+#else
+	at32_add_device_usart(0);
+#endif
+	at32_add_device_usart(2);
+
+#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM
+	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+#endif
+#ifdef CONFIG_BOARD_ATSTK100X_SPI1
+	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
+#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+	at32_add_device_mci(0, NULL);
+#endif
+	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
+			     fbmem_start, fbmem_size);
+	at32_add_device_usba(0, NULL);
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
+	at32_add_device_ac97c(0);
+#else
+	at32_add_device_abdac(0);
+#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
+	at32_add_device_ssc(0, ATMEL_SSC_TX);
+#endif
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_PSIF
+	at32_add_device_psif(0);
+	at32_add_device_psif(1);
+#endif
+
+	atstk1000_setup_j2_leds();
+	atstk1004_setup_extdac();
+
+	return 0;
+}
+postcore_initcall(atstk1004_init);
diff -urN linux-2.6.24.3/arch/avr32/boards/atstk1000/Kconfig avr32-2.6/arch/avr32/boards/atstk1000/Kconfig
--- linux-2.6.24.3/arch/avr32/boards/atstk1000/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/boards/atstk1000/Kconfig	2008-04-23 20:12:35.000000000 +0200
@@ -1,34 +1,53 @@
 # STK1000 customization
 
-if BOARD_ATSTK1002
+if BOARD_ATSTK1000
 
-config BOARD_ATSTK1002_CUSTOM
-	bool "Non-default STK-1002 jumper settings"
+choice
+	prompt "ATSTK1000 CPU daughterboard type"
+	default BOARD_ATSTK1002
+
+config BOARD_ATSTK1002
+	bool "ATSTK1002"
+	select CPU_AT32AP7000
+
+config BOARD_ATSTK1003
+	bool "ATSTK1003"
+	select CPU_AT32AP7001
+
+config BOARD_ATSTK1004
+	bool "ATSTK1004"
+	select CPU_AT32AP7002
+
+endchoice
+
+
+config BOARD_ATSTK100X_CUSTOM
+	bool "Non-default STK1002/STK1003/STK1004 jumper settings"
 	help
 	  You will normally leave the jumpers on the CPU card at their
 	  default settings.  If you need to use certain peripherals,
 	  you will need to change some of those jumpers.
 
-if BOARD_ATSTK1002_CUSTOM
+if BOARD_ATSTK100X_CUSTOM
 
-config BOARD_ATSTK1002_SW1_CUSTOM
+config BOARD_ATSTK100X_SW1_CUSTOM
 	bool "SW1: use SSC1 (not SPI0)"
 	help
 	  This also prevents using the external DAC as an audio interface,
 	  and means you can't initialize the on-board QVGA display.
 
-config BOARD_ATSTK1002_SW2_CUSTOM
+config BOARD_ATSTK100X_SW2_CUSTOM
 	bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
 	help
 	  If you change this you'll want an updated boot loader putting
 	  the console on UART-C not UART-A.
 
-config BOARD_ATSTK1002_SW3_CUSTOM
+config BOARD_ATSTK100X_SW3_CUSTOM
 	bool "SW3: use TIMER1 (not SSC0 and GCLK)"
 	help
 	  This also prevents using the external DAC as an audio interface.
 
-config BOARD_ATSTK1002_SW4_CUSTOM
+config BOARD_ATSTK100X_SW4_CUSTOM
 	bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
 	help
 	  To use the camera interface you'll need a custom card (on the
@@ -36,27 +55,29 @@
 
 config BOARD_ATSTK1002_SW5_CUSTOM
 	bool "SW5: use MACB1 (not LCDC)"
+	depends on BOARD_ATSTK1002
 
 config BOARD_ATSTK1002_SW6_CUSTOM
 	bool "SW6: more GPIOs (not MACB0)"
+	depends on BOARD_ATSTK1002
 
 endif	# custom
 
-config BOARD_ATSTK1002_SPI1
+config BOARD_ATSTK100X_SPI1
 	bool "Configure SPI1 controller"
-	depends on !BOARD_ATSTK1002_SW4_CUSTOM
+	depends on !BOARD_ATSTK100X_SW4_CUSTOM
 	help
 	  All the signals for the second SPI controller are available on
 	  GPIO lines and accessed through the J1 jumper block.  Say "y"
 	  here to configure that SPI controller.
 
-config BOARD_ATSTK1002_J2_LED
+config BOARD_ATSTK1000_J2_LED
 	bool
-	default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
+	default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
 
 choice
 	prompt "LEDs connected to J2:"
-	depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
+	depends on LEDS_GPIO && !BOARD_ATSTK100X_SW4_CUSTOM
 	optional
 	help
 	  Select this if you have jumpered the J2 jumper block to the
@@ -64,16 +85,77 @@
 	  IDC cable.  A default "heartbeat" trigger is provided, but
 	  you can of course override this.
 
-config BOARD_ATSTK1002_J2_LED8
+config BOARD_ATSTK1000_J2_LED8
 	bool "LED0..LED7"
 	help
 	  Select this if J2 is jumpered to LED0..LED7 amber leds.
 
-config BOARD_ATSTK1002_J2_RGB
+config BOARD_ATSTK1000_J2_RGB
 	bool "RGB leds"
 	help
 	  Select this if J2 is jumpered to the RGB leds.
 
 endchoice
 
-endif	# stk 1002
+config BOARD_ATSTK1000_EXTDAC
+	bool
+	depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
+	default y
+
+config BOARD_ATSTK100X_ENABLE_AC97
+	bool "Use AC97C instead of ABDAC"
+	help
+	  Select this if you want to use the built-in AC97 controller
+	  instead of the built-in Audio Bitstream DAC. These share
+	  the same I/O pins on the AP7000, so both can't be enabled
+	  at the same time.
+
+	  Note that the STK1000 kit doesn't ship with an AC97 codec on
+	  board, so say N unless you've got an expansion board with an
+	  AC97 codec on it that you want to use.
+
+config BOARD_ATSTK1000_CF_HACKS
+	bool "ATSTK1000 CompactFlash hacks"
+	depends on !BOARD_ATSTK100X_SW4_CUSTOM
+	help
+	  Select this if you have re-routed the CompactFlash RESET and
+	  CD signals to GPIOs on your STK1000. This is necessary for
+	  reset and card detection to work properly, although some CF
+	  cards may be able to cope without reset.
+
+config BOARD_ATSTK1000_CF_RESET_PIN
+	hex "CompactFlash RESET pin"
+	default 0x30
+	depends on BOARD_ATSTK1000_CF_HACKS
+	help
+	  Select which GPIO pin to use for the CompactFlash RESET
+	  signal. This is specified as a hexadecimal number and should
+	  be defined as 0x20 * gpio_port + pin.
+
+	  The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
+
+config BOARD_ATSTK1000_CF_DETECT_PIN
+	hex "CompactFlash DETECT pin"
+	default 0x3e
+	depends on BOARD_ATSTK1000_CF_HACKS
+	help
+	  Select which GPIO pin to use for the CompactFlash CD
+	  signal. This is specified as a hexadecimal number and should
+	  be defined as 0x20 * gpio_port + pin.
+
+	  The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
+
+config BOARD_ATSTK100X_ENABLE_PSIF
+	bool "Enable PSIF peripheral (PS/2 support)"
+	default n
+	help
+	  Select this if you want to use the PSIF peripheral to hook up PS/2
+	  devices to your STK1000. This will require a hardware modification to
+	  work correctly, since PS/2 devices require 5 volt power and signals,
+	  while the STK1000 only provides 3.3 volt.
+
+	  Say N if you have not modified the hardware to boost the voltage, say
+	  Y if you have level convertion hardware or a PS/2 device capable of
+	  operating on 3.3 volt.
+
+endif	# stk 1000
diff -urN linux-2.6.24.3/arch/avr32/boards/atstk1000/Makefile avr32-2.6/arch/avr32/boards/atstk1000/Makefile
--- linux-2.6.24.3/arch/avr32/boards/atstk1000/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/boards/atstk1000/Makefile	2008-04-23 19:33:28.000000000 +0200
@@ -1,2 +1,4 @@
 obj-y				+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
+obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
+obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
diff -urN linux-2.6.24.3/arch/avr32/boards/atstk1000/setup.c avr32-2.6/arch/avr32/boards/atstk1000/setup.c
--- linux-2.6.24.3/arch/avr32/boards/atstk1000/setup.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/boards/atstk1000/setup.c	2008-04-23 19:33:28.000000000 +0200
@@ -10,13 +10,17 @@
 #include <linux/bootmem.h>
 #include <linux/fb.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <linux/types.h>
 #include <linux/linkage.h>
 
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
+
+#include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
+#include <asm/arch/portmux.h>
 
 #include "atstk1000.h"
 
@@ -61,3 +65,63 @@
 	.default_monspecs	= &atstk1000_default_monspecs,
 	.guard_time		= 2,
 };
+
+#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
+#include <linux/leds.h>
+
+static struct gpio_led stk1000_j2_led[] = {
+#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
+#define LEDSTRING "J2 jumpered to LED8"
+	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
+	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
+	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
+	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
+	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
+	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
+	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
+	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
+			.default_trigger = "heartbeat", },
+#else	/* RGB */
+#define LEDSTRING "J2 jumpered to RGB LEDs"
+	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
+	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
+	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
+
+	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
+			.default_trigger = "heartbeat", },
+	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
+	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
+			.default_trigger = "heartbeat", },
+	/* PB16, PB30 unused */
+#endif
+};
+
+static struct gpio_led_platform_data stk1000_j2_led_data = {
+	.num_leds	= ARRAY_SIZE(stk1000_j2_led),
+	.leds		= stk1000_j2_led,
+};
+
+static struct platform_device stk1000_j2_led_dev = {
+	.name		= "leds-gpio",
+	.id		= 2,	/* gpio block J2 */
+	.dev		= {
+		.platform_data	= &stk1000_j2_led_data,
+	},
+};
+
+void __init atstk1000_setup_j2_leds(void)
+{
+	unsigned	i;
+
+	for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
+		at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
+
+	printk("STK1000: " LEDSTRING "\n");
+	platform_device_register(&stk1000_j2_led_dev);
+}
+#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
+void __init atstk1000_setup_j2_leds(void)
+{
+
+}
+#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */
diff -urN linux-2.6.24.3/arch/avr32/configs/atngw100_defconfig avr32-2.6/arch/avr32/configs/atngw100_defconfig
--- linux-2.6.24.3/arch/avr32/configs/atngw100_defconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/configs/atngw100_defconfig	2008-04-23 20:12:35.000000000 +0200
@@ -1,46 +1,52 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc5
-# Sat Jun 23 15:40:05 2007
+# Linux kernel version: 2.6.24
+# Thu Mar  6 12:49:54 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -61,35 +67,28 @@
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLUB_DEBUG is not set
+CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -107,21 +106,28 @@
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
 CONFIG_CPU_AT32AP7000=y
 # CONFIG_BOARD_ATSTK1000 is not set
 CONFIG_BOARD_ATNGW100=y
+CONFIG_BOARD_ATNGW100_I2C_GPIO=y
 CONFIG_LOADER_U_BOOT=y
 
 #
 # Atmel AVR32 AP options
 #
-# CONFIG_AP7000_32_BIT_SMC is not set
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_8_BIT_SMC is not set
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
 CONFIG_LOAD_ADDRESS=0x10000000
 CONFIG_ENTRY_ADDRESS=0x90000000
 CONFIG_PHYS_OFFSET=0x10000000
@@ -141,10 +147,14 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
+CONFIG_DW_DMAC=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
@@ -153,13 +163,31 @@
 CONFIG_CMDLINE=""
 
 #
-# Bus options
+# Power management options
 #
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
 #
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -213,6 +241,7 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -240,6 +269,7 @@
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
 
 #
 # Core Netfilter Configuration
@@ -252,6 +282,7 @@
 # CONFIG_NF_CONNTRACK_EVENTS is not set
 CONFIG_NF_CT_PROTO_GRE=m
 # CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -269,9 +300,11 @@
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
@@ -284,6 +317,7 @@
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
@@ -292,6 +326,8 @@
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
@@ -359,13 +395,19 @@
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
+CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 # CONFIG_DECNET is not set
+CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -373,10 +415,6 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -384,6 +422,7 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -397,6 +436,7 @@
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -405,16 +445,13 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -434,6 +471,7 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -493,20 +531,8 @@
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -517,11 +543,13 @@
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
 # CONFIG_IDE is not set
 
 #
@@ -529,30 +557,42 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_PHYLIB is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
 
 #
-# Ethernet (10 or 100Mbit)
+# MII PHY device drivers
 #
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
 CONFIG_MACB=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -571,21 +611,14 @@
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -615,28 +648,57 @@
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
 # SPI support
@@ -655,13 +717,25 @@
 # SPI Protocol Masters
 #
 # CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
 
 #
-# Dallas's 1-wire bus
+# Watchdog Device Drivers
 #
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -678,23 +752,21 @@
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
@@ -706,12 +778,48 @@
 #
 # USB Gadget Support
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
 
 #
-# LED devices
+# MMC/SD Host Controller Drivers
 #
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -726,53 +834,71 @@
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
+# RTC interfaces
 #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# I2C RTC drivers
 #
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
-# Real Time Clock
+# SPI RTC drivers
 #
-# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
 
 #
-# DMA Engine support
+# Platform RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Clients
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_AT32AP700X=y
 
 #
-# DMA Devices
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -781,7 +907,8 @@
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
@@ -814,7 +941,6 @@
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -830,10 +956,12 @@
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -842,19 +970,21 @@
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_SUNRPC_BIND34 is not set
@@ -871,23 +1001,18 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
+CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_850=m
 # CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
@@ -908,7 +1033,7 @@
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -921,18 +1046,19 @@
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -941,12 +1067,17 @@
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -954,21 +1085,21 @@
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_KPROBES is not set
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
@@ -989,6 +1120,7 @@
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1002,15 +1134,14 @@
 CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -1018,8 +1149,9 @@
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
diff -urN linux-2.6.24.3/arch/avr32/configs/atstk1002_defconfig avr32-2.6/arch/avr32/configs/atstk1002_defconfig
--- linux-2.6.24.3/arch/avr32/configs/atstk1002_defconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/configs/atstk1002_defconfig	2008-04-23 20:12:35.000000000 +0200
@@ -1,48 +1,49 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc5
-# Sat Jun 23 15:32:08 2007
+# Linux kernel version: 2.6.24
+# Thu Mar  6 12:49:17 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-# CONFIG_TASK_XACCT is not set
-# CONFIG_UTS_NS is not set
-CONFIG_AUDIT=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
@@ -63,35 +64,28 @@
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLUB_DEBUG is not set
+CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -99,32 +93,49 @@
 CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_CFQ=y
 # CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
 
 #
 # System Type and features
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SUBARCH_AVR32B=y
 CONFIG_MMU=y
 CONFIG_PERFORMANCE_COUNTERS=y
 CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
 CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATSTK1002=y
 CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATNGW100 is not set
+CONFIG_BOARD_ATSTK1002=y
+# CONFIG_BOARD_ATSTK1003 is not set
+# CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
 CONFIG_LOADER_U_BOOT=y
 
 #
 # Atmel AVR32 AP options
 #
-# CONFIG_AP7000_32_BIT_SMC is not set
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_8_BIT_SMC is not set
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
 CONFIG_LOAD_ADDRESS=0x10000000
 CONFIG_ENTRY_ADDRESS=0x90000000
 CONFIG_PHYS_OFFSET=0x10000000
@@ -144,10 +155,14 @@
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+CONFIG_DW_DMAC=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
@@ -156,13 +171,31 @@
 CONFIG_CMDLINE=""
 
 #
-# Bus options
+# Power management options
 #
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
 #
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -182,7 +215,12 @@
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -191,36 +229,52 @@
 CONFIG_IP_PNP_DHCP=y
 # CONFIG_IP_PNP_BOOTP is not set
 # CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
+CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
+CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -228,16 +282,13 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -251,6 +302,7 @@
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -259,16 +311,13 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -288,6 +337,7 @@
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -327,6 +377,8 @@
 #
 # Self-contained MTD device drivers
 #
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_M25P80=m
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -345,20 +397,8 @@
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -369,42 +409,91 @@
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=m
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_PROC_FS is not set
 
 #
-# Multi-device support (RAID and LVM)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_MD is not set
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Network device support
+# SCSI Transports
 #
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_AT32=m
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_PHYLIB is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
 
 #
-# Ethernet (10 or 100Mbit)
+# MII PHY device drivers
 #
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
 CONFIG_MACB=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -423,27 +512,54 @@
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
-# CONFIG_INPUT is not set
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -467,40 +583,94 @@
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
-# TPM devices
+# SPI support
 #
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
 
 #
-# SPI support
+# SPI Master Controller Drivers
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
 
 #
-# Dallas's 1-wire bus
+# SPI Protocol Masters
 #
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -517,23 +687,104 @@
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
+# CONFIG_LOGO is not set
 
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# AVR32 devices
+#
+CONFIG_SND_ATMEL_AC97=m
 
 #
-# USB support
+# SPI devices
 #
+CONFIG_SND_AT73C213=m
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+CONFIG_SOUND_AT32_ABDAC=m
+CONFIG_AC97_BUS=m
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
@@ -545,63 +796,137 @@
 #
 # USB Gadget Support
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
 
 #
 # LED drivers
 #
+CONFIG_LEDS_ATMEL_PWM=m
+CONFIG_LEDS_GPIO=m
 
 #
 # LED Triggers
 #
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# InfiniBand support
+# RTC interfaces
 #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# I2C RTC drivers
 #
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
-# Real Time Clock
+# SPI RTC drivers
 #
-# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
 
 #
-# DMA Engine support
+# Platform RTC drivers
 #
-# CONFIG_DMA_ENGINE is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# DMA Clients
+# on-CPU RTC drivers
 #
+CONFIG_RTC_DRV_AT32AP700X=y
 
 #
-# DMA Devices
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
+# CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -609,7 +934,7 @@
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -637,8 +962,7 @@
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -652,11 +976,12 @@
 # CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -665,10 +990,7 @@
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -688,17 +1010,12 @@
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
@@ -739,17 +1056,18 @@
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -758,12 +1076,17 @@
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -771,22 +1094,63 @@
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
-# CONFIG_KPROBES is not set
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
@@ -794,10 +1158,10 @@
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
+CONFIG_CRC7=m
 # CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
diff -urN linux-2.6.24.3/arch/avr32/configs/atstk1003_defconfig avr32-2.6/arch/avr32/configs/atstk1003_defconfig
--- linux-2.6.24.3/arch/avr32/configs/atstk1003_defconfig	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/configs/atstk1003_defconfig	2008-04-23 20:12:35.000000000 +0200
@@ -0,0 +1,1041 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Thu Mar  6 12:50:27 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+# CONFIG_TASK_XACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7001=y
+CONFIG_BOARD_ATSTK1000=y
+# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_ATSTK1002 is not set
+CONFIG_BOARD_ATSTK1003=y
+# CONFIG_BOARD_ATSTK1004 is not set
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
+# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+CONFIG_GPIO_DEV=y
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
+CONFIG_DW_DMAC=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=m
+CONFIG_MTD_M25P80=m
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=m
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_PATA_AT32=m
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_GPIO=m
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ATMELTWI=m
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# AVR32 devices
+#
+CONFIG_SND_ATMEL_AC97=m
+
+#
+# SPI devices
+#
+CONFIG_SND_AT73C213=m
+CONFIG_SND_AT73C213_TARGET_BITRATE=48000
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_ATMEL_PWM=m
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+
+#
+# Userspace I/O
+#
+CONFIG_UIO=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff -urN linux-2.6.24.3/arch/avr32/configs/atstk1004_defconfig avr32-2.6/arch/avr32/configs/atstk1004_defconfig
--- linux-2.6.24.3/arch/avr32/configs/atstk1004_defconfig	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/configs/atstk1004_defconfig	2008-04-23 20:12:35.000000000 +0200
@@ -0,0 +1,639 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Thu Mar  6 12:51:05 2008
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_MODULES is not set
+# CONFIG_BLOCK is not set
+
+#
+# System Type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP700X=y
+CONFIG_CPU_AT32AP7002=y
+CONFIG_BOARD_ATSTK1000=y
+# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_ATSTK1002 is not set
+# CONFIG_BOARD_ATSTK1003 is not set
+CONFIG_BOARD_ATSTK1004=y
+# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
+# CONFIG_BOARD_ATSTK100X_SPI1 is not set
+# CONFIG_BOARD_ATSTK1000_J2_LED is not set
+CONFIG_BOARD_ATSTK1000_EXTDAC=y
+# CONFIG_BOARD_ATSTK100X_ENABLE_AC97 is not set
+# CONFIG_BOARD_ATSTK1000_CF_HACKS is not set
+# CONFIG_BOARD_ATSTK100X_ENABLE_PSIF is not set
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP700X_32_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_8_BIT_SMC is not set
+# CONFIG_GPIO_DEV is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
+# CONFIG_DW_DMAC is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_CMDLINE=""
+
+#
+# Power management options
+#
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_PDC is not set
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT32AP700X_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+CONFIG_USB_GADGET_ATMEL_USBA=y
+CONFIG_USB_ATMEL_USBA=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT32AP700X=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff -urN linux-2.6.24.3/arch/avr32/drivers/dw-dmac.c avr32-2.6/arch/avr32/drivers/dw-dmac.c
--- linux-2.6.24.3/arch/avr32/drivers/dw-dmac.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/drivers/dw-dmac.c	2008-04-23 19:33:28.000000000 +0200
@@ -0,0 +1,761 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/dma-controller.h>
+#include <asm/io.h>
+
+#include "dw-dmac.h"
+
+#define DMAC_NR_CHANNELS 3
+#define DMAC_MAX_BLOCKSIZE 4095
+
+enum {
+	CH_STATE_FREE = 0,
+	CH_STATE_ALLOCATED,
+	CH_STATE_BUSY,
+};
+
+struct dw_dma_lli {
+	dma_addr_t	sar;
+	dma_addr_t	dar;
+	dma_addr_t	llp;
+	u32		ctllo;
+	u32		ctlhi;
+	u32		sstat;
+	u32		dstat;
+};
+
+struct dw_dma_block {
+	struct dw_dma_lli *lli_vaddr;
+	dma_addr_t lli_dma_addr;
+};
+
+struct dw_dma_channel {
+	unsigned int state;
+        int is_cyclic;
+	struct dma_request_sg *req_sg;
+	struct dma_request_cyclic *req_cyclic;
+	unsigned int nr_blocks;
+	int direction;
+	struct dw_dma_block *block;
+};
+
+struct dw_dma_controller {
+	spinlock_t lock;
+	void * __iomem	regs;
+	struct dma_pool *lli_pool;
+	struct clk *hclk;
+	struct dma_controller dma;
+	struct dw_dma_channel channel[DMAC_NR_CHANNELS];
+};
+#define to_dw_dmac(dmac) container_of(dmac, struct dw_dma_controller, dma)
+
+#define dmac_writel_hi(dmac, reg, value) \
+	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg + 4)
+#define dmac_readl_hi(dmac, reg) \
+	__raw_readl((dmac)->regs + DW_DMAC_##reg + 4)
+#define dmac_writel_lo(dmac, reg, value) \
+	__raw_writel((value), (dmac)->regs + DW_DMAC_##reg)
+#define dmac_readl_lo(dmac, reg) \
+	__raw_readl((dmac)->regs + DW_DMAC_##reg)
+#define dmac_chan_writel_hi(dmac, chan, reg, value) \
+	__raw_writel((value), ((dmac)->regs + 0x58 * (chan) \
+			       + DW_DMAC_CHAN_##reg + 4))
+#define dmac_chan_readl_hi(dmac, chan, reg) \
+	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg + 4)
+#define dmac_chan_writel_lo(dmac, chan, reg, value) \
+	__raw_writel((value), (dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
+#define dmac_chan_readl_lo(dmac, chan, reg) \
+	__raw_readl((dmac)->regs + 0x58 * (chan) + DW_DMAC_CHAN_##reg)
+#define set_channel_bit(dmac, reg, chan) \
+	dmac_writel_lo(dmac, reg, (1 << (chan)) | (1 << ((chan) + 8)))
+#define clear_channel_bit(dmac, reg, chan) \
+	dmac_writel_lo(dmac, reg, (0 << (chan)) | (1 << ((chan) + 8)))
+
+static int dmac_alloc_channel(struct dma_controller *_dmac)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+	struct dw_dma_channel *chan;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&dmac->lock, flags);
+	for (i = 0; i < DMAC_NR_CHANNELS; i++)
+		if (dmac->channel[i].state == CH_STATE_FREE)
+			break;
+
+	if (i < DMAC_NR_CHANNELS) {
+		chan = &dmac->channel[i];
+		chan->state = CH_STATE_ALLOCATED;
+	} else {
+		i = -EBUSY;
+	}
+
+	spin_unlock_irqrestore(&dmac->lock, flags);
+
+	return i;
+}
+
+static void dmac_release_channel(struct dma_controller *_dmac, int channel)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+
+	BUG_ON(channel >= DMAC_NR_CHANNELS
+	       || dmac->channel[channel].state != CH_STATE_ALLOCATED);
+
+	dmac->channel[channel].state = CH_STATE_FREE;
+}
+
+static struct dw_dma_block *allocate_blocks(struct dw_dma_controller *dmac,
+					    unsigned int nr_blocks)
+{
+	struct dw_dma_block *block;
+	void *p;
+	unsigned int i;
+
+	block = kmalloc(nr_blocks * sizeof(*block),
+			GFP_KERNEL);
+	if (unlikely(!block))
+		return NULL;
+
+	for (i = 0; i < nr_blocks; i++) {
+		p = dma_pool_alloc(dmac->lli_pool, GFP_KERNEL,
+				   &block[i].lli_dma_addr);
+		block[i].lli_vaddr = p;
+		if (unlikely(!p))
+			goto fail;
+	}
+
+	return block;
+
+fail:
+	for (i = 0; i < nr_blocks; i++) {
+		if (!block[i].lli_vaddr)
+			break;
+		dma_pool_free(dmac->lli_pool, block[i].lli_vaddr,
+			      block[i].lli_dma_addr);
+	}
+	kfree(block);
+	return NULL;
+}
+
+static void cleanup_channel(struct dw_dma_controller *dmac,
+			    struct dw_dma_channel *chan)
+{
+	unsigned int i;
+
+	if (chan->nr_blocks > 1) {
+		for (i = 0; i < chan->nr_blocks; i++)
+			dma_pool_free(dmac->lli_pool, chan->block[i].lli_vaddr,
+				      chan->block[i].lli_dma_addr);
+		kfree(chan->block);
+	}
+
+	chan->state = CH_STATE_ALLOCATED;
+}
+
+static int dmac_prepare_request_sg(struct dma_controller *_dmac,
+				   struct dma_request_sg *req)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+	struct dw_dma_channel *chan;
+	unsigned long ctlhi, ctllo, cfghi, cfglo;
+	unsigned long block_size;
+	unsigned int nr_blocks;
+	int ret, i, direction;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dmac->lock, flags);
+
+	ret = -EINVAL;
+	if (req->req.channel >= DMAC_NR_CHANNELS
+	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
+	    || req->block_size > DMAC_MAX_BLOCKSIZE) {
+		spin_unlock_irqrestore(&dmac->lock, flags);
+		return -EINVAL;
+	}
+
+	chan = &dmac->channel[req->req.channel];
+	chan->state = CH_STATE_BUSY;
+	chan->req_sg = req;
+	chan->is_cyclic = 0;
+
+	/*
+	 * We have marked the channel as busy, so no need to keep the
+	 * lock as long as we only touch the channel-specific
+	 * registers
+	 */
+	spin_unlock_irqrestore(&dmac->lock, flags);
+
+	/*
+	 * There may be limitations in the driver and/or the DMA
+	 * controller that prevents us from sending a whole
+	 * scatterlist item in one go.  Taking this into account,
+	 * calculate the number of block transfers we need to set up.
+	 *
+	 * FIXME: Let the peripheral driver know about the maximum
+	 * block size we support. We really don't want to use a
+	 * different block size than what was suggested by the
+	 * peripheral.
+	 *
+	 * Each block will get its own Linked List Item (LLI) below.
+	 */
+	block_size = req->block_size;
+	nr_blocks = req->nr_blocks;
+	pr_debug("block_size %lu, nr_blocks %u nr_sg = %u\n",
+		 block_size, nr_blocks, req->nr_sg);
+
+	BUG_ON(nr_blocks == 0);
+	chan->nr_blocks = nr_blocks;
+
+	ret = -EINVAL;
+	cfglo = cfghi = 0;
+	switch (req->direction) {
+	case DMA_DIR_MEM_TO_PERIPH:
+		direction = DMA_TO_DEVICE;
+		cfghi = req->periph_id << (43 - 32);
+		break;
+
+	case DMA_DIR_PERIPH_TO_MEM:
+		direction = DMA_FROM_DEVICE;
+		cfghi = req->periph_id << (39 - 32);
+		break;
+	default:
+		goto out_unclaim_channel;
+	}
+
+        chan->direction = direction;
+
+	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
+	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
+
+	ctlhi = block_size >> req->width;
+	ctllo = ((req->direction << 20)
+		 // | (1 << 14) | (1 << 11) // source/dest burst trans len
+		 | (req->width << 4) | (req->width << 1)
+		 | (1 << 0));		 // interrupt enable
+
+	if (nr_blocks == 1) {
+		/* Only one block: No need to use block chaining */
+		if (direction == DMA_TO_DEVICE) {
+			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
+					    req->sg->dma_address);
+			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
+					    req->data_reg);
+			ctllo |= 2 << 7; // no dst increment
+		} else {
+			dmac_chan_writel_lo(dmac, req->req.channel, SAR,
+					    req->data_reg);
+			dmac_chan_writel_lo(dmac, req->req.channel, DAR,
+					    req->sg->dma_address);
+			ctllo |= 2 << 9; // no src increment
+		}
+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, ctllo);
+		dmac_chan_writel_hi(dmac, req->req.channel, CTL, ctlhi);
+		pr_debug("ctl hi:lo 0x%lx:%lx\n", ctlhi, ctllo);
+	} else {
+		struct dw_dma_lli *lli, *lli_prev = NULL;
+		int j = 0, offset = 0;
+
+		ret = -ENOMEM;
+		chan->block = allocate_blocks(dmac, nr_blocks);
+		if (!chan->block)
+			goto out_unclaim_channel;
+
+		if (direction == DMA_TO_DEVICE)
+			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
+		else
+			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
+
+		/*
+		 * Map scatterlist items to blocks. One scatterlist
+		 * item may need more than one block for the reasons
+		 * mentioned above.
+		 */
+		for (i = 0; i < nr_blocks; i++) {
+			lli = chan->block[i].lli_vaddr;
+			if (lli_prev) {
+				lli_prev->llp = chan->block[i].lli_dma_addr;
+				pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+					 i - 1, chan->block[i - 1].lli_vaddr,
+					 chan->block[i - 1].lli_dma_addr,
+					 lli_prev->sar, lli_prev->dar, lli_prev->llp,
+					 lli_prev->ctllo, lli_prev->ctlhi);
+			}
+			lli->llp = 0;
+			lli->ctllo = ctllo;
+			lli->ctlhi = ctlhi;
+			if (direction == DMA_TO_DEVICE) {
+				lli->sar = req->sg[j].dma_address + offset;
+				lli->dar = req->data_reg;
+			} else {
+				lli->sar = req->data_reg;
+				lli->dar = req->sg[j].dma_address + offset;
+			}
+			lli_prev = lli;
+
+			offset += block_size;
+			if (offset > req->sg[j].length) {
+				j++;
+				offset = 0;
+			}
+		}
+
+		pr_debug("lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+			 i - 1, chan->block[i - 1].lli_vaddr,
+			 chan->block[i - 1].lli_dma_addr, lli_prev->sar,
+			 lli_prev->dar, lli_prev->llp,
+			 lli_prev->ctllo, lli_prev->ctlhi);
+
+		/*
+		 * SAR, DAR and CTL are initialized from the LLI. We
+		 * only have to enable the LLI bits in CTL.
+		 */
+		dmac_chan_writel_hi(dmac, req->req.channel, CTL, 0);
+		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
+				    chan->block[0].lli_dma_addr);
+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
+	}
+
+	set_channel_bit(dmac, MASK_XFER, req->req.channel);
+	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
+	if (req->req.block_complete)
+		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+	else
+		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+
+	return 0;
+
+out_unclaim_channel:
+	chan->state = CH_STATE_ALLOCATED;
+	return ret;
+}
+
+static int dmac_prepare_request_cyclic(struct dma_controller *_dmac,
+                                       struct dma_request_cyclic *req)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+	struct dw_dma_channel *chan;
+	unsigned long ctlhi, ctllo, cfghi, cfglo;
+	unsigned long block_size;
+	int ret, i, direction;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dmac->lock, flags);
+
+        block_size = (req->buffer_size/req->periods) >> req->width;
+
+	ret = -EINVAL;
+	if (req->req.channel >= DMAC_NR_CHANNELS
+	    || dmac->channel[req->req.channel].state != CH_STATE_ALLOCATED
+            || (req->periods == 0)
+	    || block_size > DMAC_MAX_BLOCKSIZE) {
+		spin_unlock_irqrestore(&dmac->lock, flags);
+		return -EINVAL;
+	}
+
+	chan = &dmac->channel[req->req.channel];
+	chan->state = CH_STATE_BUSY;
+	chan->is_cyclic = 1;
+        chan->req_cyclic = req;
+
+	/*
+	 * We have marked the channel as busy, so no need to keep the
+	 * lock as long as we only touch the channel-specific
+	 * registers
+	 */
+	spin_unlock_irqrestore(&dmac->lock, flags);
+
+	/*
+          Setup
+	 */
+	BUG_ON(req->buffer_size % req->periods);
+	/* printk(KERN_INFO "block_size = %lu, periods = %u\n", block_size, req->periods); */
+
+	chan->nr_blocks = req->periods;
+
+	ret = -EINVAL;
+	cfglo = cfghi = 0;
+	switch (req->direction) {
+	case DMA_DIR_MEM_TO_PERIPH:
+		direction = DMA_TO_DEVICE;
+		cfghi = req->periph_id << (43 - 32);
+		break;
+
+	case DMA_DIR_PERIPH_TO_MEM:
+		direction = DMA_FROM_DEVICE;
+		cfghi = req->periph_id << (39 - 32);
+		break;
+	default:
+		goto out_unclaim_channel;
+	}
+
+        chan->direction = direction;
+
+	dmac_chan_writel_hi(dmac, req->req.channel, CFG, cfghi);
+	dmac_chan_writel_lo(dmac, req->req.channel, CFG, cfglo);
+
+	ctlhi = block_size;
+	ctllo = ((req->direction << 20)
+		 | (req->width << 4) | (req->width << 1)
+		 | (1 << 0));		 // interrupt enable
+
+        {
+		struct dw_dma_lli *lli = NULL, *lli_prev = NULL;
+
+		ret = -ENOMEM;
+		chan->block = allocate_blocks(dmac, req->periods);
+		if (!chan->block)
+			goto out_unclaim_channel;
+
+		if (direction == DMA_TO_DEVICE)
+			ctllo |= 1 << 28 | 1 << 27 | 2 << 7;
+		else
+			ctllo |= 1 << 28 | 1 << 27 | 2 << 9;
+
+		/*
+		 * Set up a linked list items where each period gets
+		 * an item. The linked list item for the last period
+		 * points back to the star of the buffer making a
+		 * cyclic buffer.
+		 */
+		for (i = 0; i < req->periods; i++) {
+			lli = chan->block[i].lli_vaddr;
+			if (lli_prev) {
+				lli_prev->llp = chan->block[i].lli_dma_addr;
+				/* printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+				   i - 1, chan->block[i - 1].lli_vaddr,
+				   chan->block[i - 1].lli_dma_addr,
+				   lli_prev->sar, lli_prev->dar, lli_prev->llp,
+				   lli_prev->ctllo, lli_prev->ctlhi);*/
+			}
+			lli->llp = 0;
+			lli->ctllo = ctllo;
+			lli->ctlhi = ctlhi;
+			if (direction == DMA_TO_DEVICE) {
+				lli->sar = req->buffer_start + i*(block_size << req->width);
+				lli->dar = req->data_reg;
+			} else {
+				lli->sar = req->data_reg;
+				lli->dar = req->buffer_start + i*(block_size << req->width);
+			}
+			lli_prev = lli;
+		}
+		lli->llp = chan->block[0].lli_dma_addr;
+
+		/*printk(KERN_INFO "lli[%d] (0x%p/0x%x): 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+		  i - 1, chan->block[i - 1].lli_vaddr,
+		  chan->block[i - 1].lli_dma_addr, lli_prev->sar,
+		  lli_prev->dar, lli_prev->llp,
+		  lli_prev->ctllo, lli_prev->ctlhi); */
+
+		/*
+		 * SAR, DAR and CTL are initialized from the LLI. We
+		 * only have to enable the LLI bits in CTL.
+		 */
+		dmac_chan_writel_lo(dmac, req->req.channel, LLP,
+				    chan->block[0].lli_dma_addr);
+		dmac_chan_writel_lo(dmac, req->req.channel, CTL, 1 << 28 | 1 << 27);
+	}
+
+	clear_channel_bit(dmac, MASK_XFER, req->req.channel);
+	set_channel_bit(dmac, MASK_ERROR, req->req.channel);
+	if (req->req.block_complete)
+		set_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+	else
+		clear_channel_bit(dmac, MASK_BLOCK, req->req.channel);
+
+	return 0;
+
+out_unclaim_channel:
+	chan->state = CH_STATE_ALLOCATED;
+	return ret;
+}
+
+static int dmac_start_request(struct dma_controller *_dmac,
+			      unsigned int channel)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+
+	BUG_ON(channel >= DMAC_NR_CHANNELS);
+
+	set_channel_bit(dmac, CH_EN, channel);
+
+	return 0;
+}
+
+static dma_addr_t dmac_get_current_pos(struct dma_controller *_dmac,
+                                       unsigned int channel)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+	struct dw_dma_channel *chan;
+        dma_addr_t current_pos;
+
+	BUG_ON(channel >= DMAC_NR_CHANNELS);
+
+        chan = &dmac->channel[channel];
+
+	switch (chan->direction) {
+	case DMA_TO_DEVICE:
+		current_pos = dmac_chan_readl_lo(dmac, channel, SAR);
+		break;
+	case DMA_FROM_DEVICE:
+		current_pos = dmac_chan_readl_lo(dmac, channel, DAR);
+		break;
+	default:
+		return 0;
+	}
+
+
+        if (!current_pos) {
+		if (chan->is_cyclic) {
+			current_pos = chan->req_cyclic->buffer_start;
+		} else {
+			current_pos = chan->req_sg->sg->dma_address;
+		}
+	}
+
+	return current_pos;
+}
+
+
+static int dmac_stop_request(struct dma_controller *_dmac,
+                             unsigned int channel)
+{
+	struct dw_dma_controller *dmac = to_dw_dmac(_dmac);
+	struct dw_dma_channel *chan;
+
+	BUG_ON(channel >= DMAC_NR_CHANNELS);
+
+	chan = &dmac->channel[channel];
+	pr_debug("stop: st%u s%08x d%08x l%08x ctl0x%08x:0x%08x\n",
+		 chan->state, dmac_chan_readl_lo(dmac, channel, SAR),
+		 dmac_chan_readl_lo(dmac, channel, DAR),
+		 dmac_chan_readl_lo(dmac, channel, LLP),
+		 dmac_chan_readl_hi(dmac, channel, CTL),
+		 dmac_chan_readl_lo(dmac, channel, CTL));
+
+	if (chan->state == CH_STATE_BUSY) {
+		clear_channel_bit(dmac, CH_EN, channel);
+		cleanup_channel(dmac, &dmac->channel[channel]);
+	}
+
+	return 0;
+}
+
+
+static void dmac_block_complete(struct dw_dma_controller *dmac)
+{
+	struct dw_dma_channel *chan;
+	unsigned long status, chanid;
+
+	status = dmac_readl_lo(dmac, STATUS_BLOCK);
+
+	while (status) {
+		struct dma_request *req;
+		chanid = __ffs(status);
+		chan = &dmac->channel[chanid];
+
+                if (chan->is_cyclic) {
+			BUG_ON(!chan->req_cyclic
+			       || !chan->req_cyclic->req.block_complete);
+			req = &chan->req_cyclic->req;
+                } else {
+			BUG_ON(!chan->req_sg || !chan->req_sg->req.block_complete);
+			req = &chan->req_sg->req;
+                }
+		dmac_writel_lo(dmac, CLEAR_BLOCK, 1 << chanid);
+		req->block_complete(req);
+		status = dmac_readl_lo(dmac, STATUS_BLOCK);
+	}
+}
+
+static void dmac_xfer_complete(struct dw_dma_controller *dmac)
+{
+	struct dw_dma_channel *chan;
+	struct dma_request *req;
+	unsigned long status, chanid;
+
+	status = dmac_readl_lo(dmac, STATUS_XFER);
+
+	while (status) {
+		chanid = __ffs(status);
+		chan = &dmac->channel[chanid];
+
+		dmac_writel_lo(dmac, CLEAR_XFER, 1 << chanid);
+
+                req = &chan->req_sg->req;
+                BUG_ON(!req);
+                cleanup_channel(dmac, chan);
+                if (req->xfer_complete)
+			req->xfer_complete(req);
+
+		status = dmac_readl_lo(dmac, STATUS_XFER);
+	}
+}
+
+static void dmac_error(struct dw_dma_controller *dmac)
+{
+	struct dw_dma_channel *chan;
+	unsigned long status, chanid;
+
+	status = dmac_readl_lo(dmac, STATUS_ERROR);
+
+	while (status) {
+		struct dma_request *req;
+
+		chanid = __ffs(status);
+		chan = &dmac->channel[chanid];
+
+		dmac_writel_lo(dmac, CLEAR_ERROR, 1 << chanid);
+		clear_channel_bit(dmac, CH_EN, chanid);
+
+                if (chan->is_cyclic) {
+			BUG_ON(!chan->req_cyclic);
+			req = &chan->req_cyclic->req;
+                } else {
+			BUG_ON(!chan->req_sg);
+			req = &chan->req_sg->req;
+                }
+
+		cleanup_channel(dmac, chan);
+		if (req->error)
+			req->error(req);
+
+		status = dmac_readl_lo(dmac, STATUS_XFER);
+	}
+}
+
+static irqreturn_t dmac_interrupt(int irq, void *dev_id)
+{
+	struct dw_dma_controller *dmac = dev_id;
+	unsigned long status;
+	int ret = IRQ_NONE;
+
+	spin_lock(&dmac->lock);
+
+	status = dmac_readl_lo(dmac, STATUS_INT);
+
+	while (status) {
+		ret = IRQ_HANDLED;
+		if (status & 0x10)
+			dmac_error(dmac);
+		if (status & 0x02)
+			dmac_block_complete(dmac);
+		if (status & 0x01)
+			dmac_xfer_complete(dmac);
+
+		status = dmac_readl_lo(dmac, STATUS_INT);
+	}
+
+	spin_unlock(&dmac->lock);
+	return ret;
+}
+
+static int __devinit dmac_probe(struct platform_device *pdev)
+{
+	struct dw_dma_controller *dmac;
+	struct resource *regs;
+	int ret;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
+	dmac = kmalloc(sizeof(*dmac), GFP_KERNEL);
+	if (!dmac)
+		return -ENOMEM;
+	memset(dmac, 0, sizeof(*dmac));
+
+	dmac->hclk = clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(dmac->hclk)) {
+		ret = PTR_ERR(dmac->hclk);
+		goto out_free_dmac;
+	}
+	clk_enable(dmac->hclk);
+
+	ret = -ENOMEM;
+	dmac->lli_pool = dma_pool_create("dmac", &pdev->dev,
+					 sizeof(struct dw_dma_lli), 4, 0);
+	if (!dmac->lli_pool)
+		goto out_disable_clk;
+
+	spin_lock_init(&dmac->lock);
+	dmac->dma.dev = &pdev->dev;
+	dmac->dma.alloc_channel = dmac_alloc_channel;
+	dmac->dma.release_channel = dmac_release_channel;
+	dmac->dma.prepare_request_sg = dmac_prepare_request_sg;
+	dmac->dma.prepare_request_cyclic = dmac_prepare_request_cyclic;
+	dmac->dma.start_request = dmac_start_request;
+	dmac->dma.stop_request = dmac_stop_request;
+	dmac->dma.get_current_pos = dmac_get_current_pos;
+
+	dmac->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!dmac->regs)
+		goto out_free_pool;
+
+	ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
+			  IRQF_SAMPLE_RANDOM, pdev->name, dmac);
+	if (ret)
+		goto out_unmap_regs;
+
+	/* Enable the DMA controller */
+	dmac_writel_lo(dmac, CFG, 1);
+
+	register_dma_controller(&dmac->dma);
+
+	printk(KERN_INFO
+	       "dmac%d: DesignWare DMA controller at 0x%p irq %d\n",
+	       dmac->dma.id, dmac->regs, platform_get_irq(pdev, 0));
+
+	return 0;
+
+out_unmap_regs:
+	iounmap(dmac->regs);
+out_free_pool:
+	dma_pool_destroy(dmac->lli_pool);
+out_disable_clk:
+	clk_disable(dmac->hclk);
+	clk_put(dmac->hclk);
+out_free_dmac:
+	kfree(dmac);
+	return ret;
+}
+
+static struct platform_driver dmac_driver = {
+	.probe		= dmac_probe,
+	.driver		= {
+		.name		= "dmaca",
+	},
+};
+
+static int __init dmac_init(void)
+{
+	return platform_driver_register(&dmac_driver);
+}
+subsys_initcall(dmac_init);
+
+static void __exit dmac_exit(void)
+{
+	platform_driver_unregister(&dmac_driver);
+}
+module_exit(dmac_exit);
+
+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.24.3/arch/avr32/drivers/dw-dmac.h avr32-2.6/arch/avr32/drivers/dw-dmac.h
--- linux-2.6.24.3/arch/avr32/drivers/dw-dmac.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/drivers/dw-dmac.h	2008-04-23 19:33:28.000000000 +0200
@@ -0,0 +1,42 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __AVR32_DW_DMAC_H__
+#define __AVR32_DW_DMAC_H__
+
+#define DW_DMAC_CFG		0x398
+#define DW_DMAC_CH_EN		0x3a0
+
+#define DW_DMAC_STATUS_XFER	0x2e8
+#define DW_DMAC_STATUS_BLOCK	0x2f0
+#define DW_DMAC_STATUS_ERROR	0x308
+
+#define DW_DMAC_MASK_XFER	0x310
+#define DW_DMAC_MASK_BLOCK	0x318
+#define DW_DMAC_MASK_ERROR	0x330
+
+#define DW_DMAC_CLEAR_XFER	0x338
+#define DW_DMAC_CLEAR_BLOCK	0x340
+#define DW_DMAC_CLEAR_ERROR	0x358
+
+#define DW_DMAC_STATUS_INT	0x360
+
+#define DW_DMAC_CHAN_SAR	0x000
+#define DW_DMAC_CHAN_DAR	0x008
+#define DW_DMAC_CHAN_LLP	0x010
+#define DW_DMAC_CHAN_CTL	0x018
+#define DW_DMAC_CHAN_SSTAT	0x020
+#define DW_DMAC_CHAN_DSTAT	0x028
+#define DW_DMAC_CHAN_SSTATAR	0x030
+#define DW_DMAC_CHAN_DSTATAR	0x038
+#define DW_DMAC_CHAN_CFG	0x040
+#define DW_DMAC_CHAN_SGR	0x048
+#define DW_DMAC_CHAN_DSR	0x050
+
+#endif /* __AVR32_DW_DMAC_H__ */
diff -urN linux-2.6.24.3/arch/avr32/drivers/Makefile avr32-2.6/arch/avr32/drivers/Makefile
--- linux-2.6.24.3/arch/avr32/drivers/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/drivers/Makefile	2008-04-23 19:33:28.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_DW_DMAC)			+= dw-dmac.o
diff -urN linux-2.6.24.3/arch/avr32/Kconfig avr32-2.6/arch/avr32/Kconfig
--- linux-2.6.24.3/arch/avr32/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/Kconfig	2008-04-23 20:12:35.000000000 +0200
@@ -45,6 +45,9 @@
 config GENERIC_TIME
 	def_bool y
 
+config GENERIC_CLOCKEVENTS
+	def_bool y
+
 config RWSEM_XCHGADD_ALGORITHM
 	def_bool n
 
@@ -54,6 +57,9 @@
 config ARCH_HAS_ILOG2_U64
 	def_bool n
 
+config ARCH_SUPPORTS_OPROFILE
+	def_bool y
+
 config GENERIC_HWEIGHT
 	def_bool y
 
@@ -68,6 +74,8 @@
 
 menu "System Type and features"
 
+source "kernel/time/Kconfig"
+
 config SUBARCH_AVR32B
 	bool
 config MMU
@@ -81,19 +89,23 @@
 	select MMU
 	select PERFORMANCE_COUNTERS
 
-choice
-	prompt "AVR32 CPU type"
-	default CPU_AT32AP7000
+#
+# CPU types
+#
 
-config CPU_AT32AP7000
-	bool "AT32AP7000"
+# AP7000 derivatives
+config CPU_AT32AP700X
+	bool
 	select PLATFORM_AT32AP
-endchoice
-
-#
-# CPU Daughterboards for ATSTK1000
-config BOARD_ATSTK1002
+config CPU_AT32AP7000
+	bool
+	select CPU_AT32AP700X
+config CPU_AT32AP7001
+	bool
+	select CPU_AT32AP700X
+config CPU_AT32AP7002
 	bool
+	select CPU_AT32AP700X
 
 choice
 	prompt "AVR32 board type"
@@ -101,15 +113,18 @@
 
 config BOARD_ATSTK1000
 	bool "ATSTK1000 evaluation board"
-	select BOARD_ATSTK1002 if CPU_AT32AP7000
 
 config BOARD_ATNGW100
 	bool "ATNGW100 Network Gateway"
+	select CPU_AT32AP7000
 endchoice
 
 if BOARD_ATSTK1000
 source "arch/avr32/boards/atstk1000/Kconfig"
 endif
+if BOARD_ATNGW100
+source "arch/avr32/boards/atngw100/Kconfig"
+endif
 
 choice
 	prompt "Boot loader type"
@@ -123,15 +138,15 @@
 
 config LOAD_ADDRESS
 	hex
-	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
 
 config ENTRY_ADDRESS
 	hex
-	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
+	default 0x90000000 if LOADER_U_BOOT=y && CPU_AT32AP700X=y
 
 config PHYS_OFFSET
 	hex
-	default 0x10000000 if CPU_AT32AP7000=y
+	default 0x10000000 if CPU_AT32AP700X=y
 
 source "kernel/Kconfig.preempt"
 
@@ -163,6 +178,20 @@
 	  enabling Nexus-compliant debuggers to keep track of the PID of the
 	  currently executing task.
 
+config NMI_DEBUGGING
+	bool "NMI Debugging"
+	default n
+	help
+	  Say Y here and pass the nmi_debug command-line parameter to
+	  the kernel to turn on NMI debugging. Depending on the value
+	  of the nmi_debug option, various pieces of information will
+	  be dumped to the console when a Non-Maskable Interrupt
+	  happens.
+
+config DW_DMAC
+	tristate "Synopsys DesignWare DMA Controller support"
+	default y if CPU_AT32AP7000
+
 # FPU emulation goes here
 
 source "kernel/Kconfig.hz"
@@ -219,6 +248,8 @@
 
 source "fs/Kconfig"
 
+source "kernel/Kconfig.instrumentation"
+
 source "arch/avr32/Kconfig.debug"
 
 source "security/Kconfig"
diff -urN linux-2.6.24.3/arch/avr32/Kconfig.debug avr32-2.6/arch/avr32/Kconfig.debug
--- linux-2.6.24.3/arch/avr32/Kconfig.debug	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/Kconfig.debug	2008-04-23 19:33:28.000000000 +0200
@@ -6,14 +6,4 @@
 
 source "lib/Kconfig.debug"
 
-config KPROBES
-	bool "Kprobes"
-	depends on DEBUG_KERNEL
-	help
-	  Kprobes allows you to trap at almost any kernel address and
-          execute a callback function.  register_kprobe() establishes
-          a probepoint and specifies the callback.  Kprobes is useful
-          for kernel debugging, non-intrusive instrumentation and testing.
-          If in doubt, say "N".
-
 endmenu
diff -urN linux-2.6.24.3/arch/avr32/kernel/cpu.c avr32-2.6/arch/avr32/kernel/cpu.c
--- linux-2.6.24.3/arch/avr32/kernel/cpu.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/cpu.c	2008-04-23 19:33:28.000000000 +0200
@@ -13,6 +13,7 @@
 #include <linux/percpu.h>
 #include <linux/param.h>
 #include <linux/errno.h>
+#include <linux/clk.h>
 
 #include <asm/setup.h>
 #include <asm/sysreg.h>
@@ -187,9 +188,20 @@
 
 subsys_initcall(topology_init);
 
+struct chip_id_map {
+	u16	mid;
+	u16	pn;
+	const char *name;
+};
+
+static const struct chip_id_map chip_names[] = {
+	{ .mid = 0x1f, .pn = 0x1e82, .name = "AT32AP700x" },
+};
+#define NR_CHIP_NAMES ARRAY_SIZE(chip_names)
+
 static const char *cpu_names[] = {
 	"Morgan",
-	"AP7000",
+	"AP7",
 };
 #define NR_CPU_NAMES ARRAY_SIZE(cpu_names)
 
@@ -206,12 +218,32 @@
 	"MPU"
 };
 
+static const char *cpu_feature_flags[] = {
+	"rmw", "dsp", "simd", "ocd", "perfctr", "java", "fpu",
+};
+
+static const char *get_chip_name(struct avr32_cpuinfo *cpu)
+{
+	unsigned int i;
+	unsigned int mid = avr32_get_manufacturer_id(cpu);
+	unsigned int pn = avr32_get_product_number(cpu);
+
+	for (i = 0; i < NR_CHIP_NAMES; i++) {
+		if (chip_names[i].mid == mid && chip_names[i].pn == pn)
+			return chip_names[i].name;
+	}
+
+	return "(unknown)";
+}
+
 void __init setup_processor(void)
 {
 	unsigned long config0, config1;
 	unsigned long features;
 	unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
+	unsigned device_id;
 	unsigned tmp;
+	unsigned i;
 
 	config0 = sysreg_read(CONFIG0);
 	config1 = sysreg_read(CONFIG1);
@@ -221,11 +253,14 @@
 	arch_rev = SYSREG_BFEXT(AR, config0);
 	mmu_type = SYSREG_BFEXT(MMUT, config0);
 
+	device_id = ocd_read(DID);
+
 	boot_cpu_data.arch_type = arch_id;
 	boot_cpu_data.cpu_type = cpu_id;
 	boot_cpu_data.arch_revision = arch_rev;
 	boot_cpu_data.cpu_revision = cpu_rev;
 	boot_cpu_data.tlb_config = mmu_type;
+	boot_cpu_data.device_id = device_id;
 
 	tmp = SYSREG_BFEXT(ILSZ, config1);
 	if (tmp) {
@@ -247,41 +282,34 @@
 		return;
 	}
 
-	printk ("CPU: %s [%02x] revision %d (%s revision %d)\n",
+	printk ("CPU: %s chip revision %c\n", get_chip_name(&boot_cpu_data),
+			avr32_get_chip_revision(&boot_cpu_data) + 'A');
+	printk ("CPU: %s [%02x] core revision %d (%s arch revision %d)\n",
 		cpu_names[cpu_id], cpu_id, cpu_rev,
 		arch_names[arch_id], arch_rev);
 	printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
 
 	printk ("CPU: features:");
 	features = 0;
-	if (config0 & SYSREG_BIT(CONFIG0_R)) {
+	if (config0 & SYSREG_BIT(CONFIG0_R))
 		features |= AVR32_FEATURE_RMW;
-		printk(" rmw");
-	}
-	if (config0 & SYSREG_BIT(CONFIG0_D)) {
+	if (config0 & SYSREG_BIT(CONFIG0_D))
 		features |= AVR32_FEATURE_DSP;
-		printk(" dsp");
-	}
-	if (config0 & SYSREG_BIT(CONFIG0_S)) {
+	if (config0 & SYSREG_BIT(CONFIG0_S))
 		features |= AVR32_FEATURE_SIMD;
-		printk(" simd");
-	}
-	if (config0 & SYSREG_BIT(CONFIG0_O)) {
+	if (config0 & SYSREG_BIT(CONFIG0_O))
 		features |= AVR32_FEATURE_OCD;
-		printk(" ocd");
-	}
-	if (config0 & SYSREG_BIT(CONFIG0_P)) {
+	if (config0 & SYSREG_BIT(CONFIG0_P))
 		features |= AVR32_FEATURE_PCTR;
-		printk(" perfctr");
-	}
-	if (config0 & SYSREG_BIT(CONFIG0_J)) {
+	if (config0 & SYSREG_BIT(CONFIG0_J))
 		features |= AVR32_FEATURE_JAVA;
-		printk(" java");
-	}
-	if (config0 & SYSREG_BIT(CONFIG0_F)) {
+	if (config0 & SYSREG_BIT(CONFIG0_F))
 		features |= AVR32_FEATURE_FPU;
-		printk(" fpu");
-	}
+
+	for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
+		if (features & (1 << i))
+			printk(" %s", cpu_feature_flags[i]);
+
 	printk("\n");
 	boot_cpu_data.features = features;
 }
@@ -291,6 +319,8 @@
 {
 	unsigned int icache_size, dcache_size;
 	unsigned int cpu = smp_processor_id();
+	unsigned int freq;
+	unsigned int i;
 
 	icache_size = boot_cpu_data.icache.ways *
 		boot_cpu_data.icache.sets *
@@ -301,15 +331,21 @@
 
 	seq_printf(m, "processor\t: %d\n", cpu);
 
+	seq_printf(m, "chip type\t: %s revision %c\n",
+			get_chip_name(&boot_cpu_data),
+			avr32_get_chip_revision(&boot_cpu_data) + 'A');
 	if (boot_cpu_data.arch_type < NR_ARCH_NAMES)
-		seq_printf(m, "cpu family\t: %s revision %d\n",
+		seq_printf(m, "cpu arch\t: %s revision %d\n",
 			   arch_names[boot_cpu_data.arch_type],
 			   boot_cpu_data.arch_revision);
 	if (boot_cpu_data.cpu_type < NR_CPU_NAMES)
-		seq_printf(m, "cpu type\t: %s revision %d\n",
+		seq_printf(m, "cpu core\t: %s revision %d\n",
 			   cpu_names[boot_cpu_data.cpu_type],
 			   boot_cpu_data.cpu_revision);
 
+	freq = (clk_get_rate(boot_cpu_data.clk) + 500) / 1000;
+	seq_printf(m, "cpu MHz\t\t: %u.%03u\n", freq / 1000, freq % 1000);
+
 	seq_printf(m, "i-cache\t\t: %dK (%u ways x %u sets x %u)\n",
 		   icache_size >> 10,
 		   boot_cpu_data.icache.ways,
@@ -320,7 +356,13 @@
 		   boot_cpu_data.dcache.ways,
 		   boot_cpu_data.dcache.sets,
 		   boot_cpu_data.dcache.linesz);
-	seq_printf(m, "bogomips\t: %lu.%02lu\n",
+
+	seq_printf(m, "features\t:");
+	for (i = 0; i < ARRAY_SIZE(cpu_feature_flags); i++)
+		if (boot_cpu_data.features & (1 << i))
+			seq_printf(m, " %s", cpu_feature_flags[i]);
+
+	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
 		   boot_cpu_data.loops_per_jiffy / (500000/HZ),
 		   (boot_cpu_data.loops_per_jiffy / (5000/HZ)) % 100);
 
@@ -343,7 +385,7 @@
 
 }
 
-struct seq_operations cpuinfo_op = {
+const struct seq_operations cpuinfo_op = {
 	.start	= c_start,
 	.next	= c_next,
 	.stop	= c_stop,
diff -urN linux-2.6.24.3/arch/avr32/kernel/dma-controller.c avr32-2.6/arch/avr32/kernel/dma-controller.c
--- linux-2.6.24.3/arch/avr32/kernel/dma-controller.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/dma-controller.c	2008-04-23 19:33:28.000000000 +0200
@@ -0,0 +1,34 @@
+/*
+ * Preliminary DMA controller framework for AVR32
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/dma-controller.h>
+
+static LIST_HEAD(controllers);
+
+int register_dma_controller(struct dma_controller *dmac)
+{
+	static int next_id;
+
+	dmac->id = next_id++;
+	list_add_tail(&dmac->list, &controllers);
+
+	return 0;
+}
+EXPORT_SYMBOL(register_dma_controller);
+
+struct dma_controller *find_dma_controller(int id)
+{
+	struct dma_controller *dmac;
+
+	list_for_each_entry(dmac, &controllers, list)
+		if (dmac->id == id)
+			return dmac;
+	return NULL;
+}
+EXPORT_SYMBOL(find_dma_controller);
diff -urN linux-2.6.24.3/arch/avr32/kernel/entry-avr32b.S avr32-2.6/arch/avr32/kernel/entry-avr32b.S
--- linux-2.6.24.3/arch/avr32/kernel/entry-avr32b.S	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/entry-avr32b.S	2008-04-23 20:12:35.000000000 +0200
@@ -741,26 +741,6 @@
 
 	.section .irq.text,"ax",@progbits
 
-.global cpu_idle_sleep
-cpu_idle_sleep:
-	mask_interrupts
-	get_thread_info r8
-	ld.w	r9, r8[TI_flags]
-	bld	r9, TIF_NEED_RESCHED
-	brcs	cpu_idle_enable_int_and_exit
-	sbr	r9, TIF_CPU_GOING_TO_SLEEP
-	st.w	r8[TI_flags], r9
-	unmask_interrupts
-	sleep 0
-cpu_idle_skip_sleep:
-	mask_interrupts
-	ld.w	r9, r8[TI_flags]
-	cbr	r9, TIF_CPU_GOING_TO_SLEEP
-	st.w	r8[TI_flags], r9
-cpu_idle_enable_int_and_exit:
-	unmask_interrupts
-	retal	r12
-
 	.global	irq_level0
 	.global	irq_level1
 	.global	irq_level2
diff -urN linux-2.6.24.3/arch/avr32/kernel/irq.c avr32-2.6/arch/avr32/kernel/irq.c
--- linux-2.6.24.3/arch/avr32/kernel/irq.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/irq.c	2008-04-23 19:33:28.000000000 +0200
@@ -25,6 +25,17 @@
 	printk("unexpected IRQ %u\n", irq);
 }
 
+/* May be overridden by platform code */
+int __weak nmi_enable(void)
+{
+	return -ENOSYS;
+}
+
+void __weak nmi_disable(void)
+{
+
+}
+
 #ifdef CONFIG_PROC_FS
 int show_interrupts(struct seq_file *p, void *v)
 {
diff -urN linux-2.6.24.3/arch/avr32/kernel/kprobes.c avr32-2.6/arch/avr32/kernel/kprobes.c
--- linux-2.6.24.3/arch/avr32/kernel/kprobes.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/kprobes.c	2008-04-23 19:33:28.000000000 +0200
@@ -48,6 +48,7 @@
 void __kprobes arch_arm_kprobe(struct kprobe *p)
 {
 	pr_debug("arming kprobe at %p\n", p->addr);
+	ocd_enable(NULL);
 	*p->addr = BREAKPOINT_INSTRUCTION;
 	flush_icache_range((unsigned long)p->addr,
 			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
@@ -56,6 +57,7 @@
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
 	pr_debug("disarming kprobe at %p\n", p->addr);
+	ocd_disable(NULL);
 	*p->addr = p->opcode;
 	flush_icache_range((unsigned long)p->addr,
 			   (unsigned long)p->addr + sizeof(kprobe_opcode_t));
@@ -260,9 +262,6 @@
 
 int __init arch_init_kprobes(void)
 {
-	printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
-	ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
-
 	/* TODO: Register kretprobe trampoline */
 	return 0;
 }
diff -urN linux-2.6.24.3/arch/avr32/kernel/Makefile avr32-2.6/arch/avr32/kernel/Makefile
--- linux-2.6.24.3/arch/avr32/kernel/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/Makefile	2008-04-23 19:33:28.000000000 +0200
@@ -6,9 +6,11 @@
 
 obj-$(CONFIG_SUBARCH_AVR32B)	+= entry-avr32b.o
 obj-y				+= syscall_table.o syscall-stubs.o irq.o
-obj-y				+= setup.o traps.o semaphore.o ptrace.o
+obj-y				+= setup.o traps.o semaphore.o ocd.o ptrace.o
 obj-y				+= signal.o sys_avr32.o process.o time.o
 obj-y				+= init_task.o switch_to.o cpu.o
+obj-y				+= dma-controller.o
 obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
+obj-$(CONFIG_NMI_DEBUGGING)	+= nmi_debug.o
diff -urN linux-2.6.24.3/arch/avr32/kernel/nmi_debug.c avr32-2.6/arch/avr32/kernel/nmi_debug.c
--- linux-2.6.24.3/arch/avr32/kernel/nmi_debug.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/nmi_debug.c	2008-04-23 19:33:28.000000000 +0200
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
+#include <linux/sched.h>
+
+#include <asm/irq.h>
+
+enum nmi_action {
+	NMI_SHOW_STATE	= 1 << 0,
+	NMI_SHOW_REGS	= 1 << 1,
+	NMI_DIE		= 1 << 2,
+	NMI_DEBOUNCE	= 1 << 3,
+};
+
+static unsigned long nmi_actions;
+
+static int nmi_debug_notify(struct notifier_block *self,
+		unsigned long val, void *data)
+{
+	struct die_args *args = data;
+
+	if (likely(val != DIE_NMI))
+		return NOTIFY_DONE;
+
+	if (nmi_actions & NMI_SHOW_STATE)
+		show_state();
+	if (nmi_actions & NMI_SHOW_REGS)
+		show_regs(args->regs);
+	if (nmi_actions & NMI_DEBOUNCE)
+		mdelay(10);
+	if (nmi_actions & NMI_DIE)
+		return NOTIFY_BAD;
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block nmi_debug_nb = {
+	.notifier_call = nmi_debug_notify,
+};
+
+static int __init nmi_debug_setup(char *str)
+{
+	char *p, *sep;
+
+	register_die_notifier(&nmi_debug_nb);
+	if (nmi_enable()) {
+		printk(KERN_WARNING "Unable to enable NMI.\n");
+		return 0;
+	}
+
+	if (*str != '=')
+		return 0;
+
+	for (p = str + 1; *p; p = sep + 1) {
+		sep = strchr(p, ',');
+		if (sep)
+			*sep = 0;
+		if (strcmp(p, "state") == 0)
+			nmi_actions |= NMI_SHOW_STATE;
+		else if (strcmp(p, "regs") == 0)
+			nmi_actions |= NMI_SHOW_REGS;
+		else if (strcmp(p, "debounce") == 0)
+			nmi_actions |= NMI_DEBOUNCE;
+		else if (strcmp(p, "die") == 0)
+			nmi_actions |= NMI_DIE;
+		else
+			printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
+				p);
+		if (!sep)
+			break;
+	}
+
+	return 0;
+}
+__setup("nmi_debug", nmi_debug_setup);
diff -urN linux-2.6.24.3/arch/avr32/kernel/ocd.c avr32-2.6/arch/avr32/kernel/ocd.c
--- linux-2.6.24.3/arch/avr32/kernel/ocd.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/ocd.c	2008-04-23 19:33:28.000000000 +0200
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/ocd.h>
+
+static long ocd_count;
+static spinlock_t ocd_lock;
+
+/**
+ * ocd_enable - enable on-chip debugging
+ * @child: task to be debugged
+ *
+ * If @child is non-NULL, ocd_enable() first checks if debugging has
+ * already been enabled for @child, and if it has, does nothing.
+ *
+ * If @child is NULL (e.g. when debugging the kernel), or debugging
+ * has not already been enabled for it, ocd_enable() increments the
+ * reference count and enables the debugging hardware.
+ */
+void ocd_enable(struct task_struct *child)
+{
+	u32 dc;
+
+	if (child)
+		pr_debug("ocd_enable: child=%s [%u]\n",
+				child->comm, child->pid);
+	else
+		pr_debug("ocd_enable (no child)\n");
+
+	if (!child || !test_and_set_tsk_thread_flag(child, TIF_DEBUG)) {
+		spin_lock(&ocd_lock);
+		ocd_count++;
+		dc = ocd_read(DC);
+		dc |= (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT);
+		ocd_write(DC, dc);
+		spin_unlock(&ocd_lock);
+	}
+}
+
+/**
+ * ocd_disable - disable on-chip debugging
+ * @child: task that was being debugged, but isn't anymore
+ *
+ * If @child is non-NULL, ocd_disable() checks if debugging is enabled
+ * for @child, and if it isn't, does nothing.
+ *
+ * If @child is NULL (e.g. when debugging the kernel), or debugging is
+ * enabled, ocd_disable() decrements the reference count, and if it
+ * reaches zero, disables the debugging hardware.
+ */
+void ocd_disable(struct task_struct *child)
+{
+	u32 dc;
+
+	if (!child)
+		pr_debug("ocd_disable (no child)\n");
+	else if (test_tsk_thread_flag(child, TIF_DEBUG))
+		pr_debug("ocd_disable: child=%s [%u]\n",
+				child->comm, child->pid);
+
+	if (!child || test_and_clear_tsk_thread_flag(child, TIF_DEBUG)) {
+		spin_lock(&ocd_lock);
+		ocd_count--;
+
+		WARN_ON(ocd_count < 0);
+
+		if (ocd_count <= 0) {
+			dc = ocd_read(DC);
+			dc &= ~((1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
+			ocd_write(DC, dc);
+		}
+		spin_unlock(&ocd_lock);
+	}
+}
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/module.h>
+
+static struct dentry *ocd_debugfs_root;
+static struct dentry *ocd_debugfs_DC;
+static struct dentry *ocd_debugfs_DS;
+static struct dentry *ocd_debugfs_count;
+
+static u64 ocd_DC_get(void *data)
+{
+	return ocd_read(DC);
+}
+static void ocd_DC_set(void *data, u64 val)
+{
+	ocd_write(DC, val);
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n");
+
+static u64 ocd_DS_get(void *data)
+{
+	return ocd_read(DS);
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n");
+
+static u64 ocd_count_get(void *data)
+{
+	return ocd_count;
+}
+DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n");
+
+static void ocd_debugfs_init(void)
+{
+	struct dentry *root;
+
+	root = debugfs_create_dir("ocd", NULL);
+	if (IS_ERR(root) || !root)
+		goto err_root;
+	ocd_debugfs_root = root;
+
+	ocd_debugfs_DC = debugfs_create_file("DC", S_IRUSR | S_IWUSR,
+				root, NULL, &fops_DC);
+	if (!ocd_debugfs_DC)
+		goto err_DC;
+
+	ocd_debugfs_DS = debugfs_create_file("DS", S_IRUSR, root,
+				NULL, &fops_DS);
+	if (!ocd_debugfs_DS)
+		goto err_DS;
+
+	ocd_debugfs_count = debugfs_create_file("count", S_IRUSR, root,
+				NULL, &fops_count);
+	if (!ocd_debugfs_count)
+		goto err_count;
+
+	return;
+
+err_count:
+	debugfs_remove(ocd_debugfs_DS);
+err_DS:
+	debugfs_remove(ocd_debugfs_DC);
+err_DC:
+	debugfs_remove(ocd_debugfs_root);
+err_root:
+	printk(KERN_WARNING "OCD: Failed to create debugfs entries\n");
+}
+#else
+static inline void ocd_debugfs_init(void)
+{
+
+}
+#endif
+
+static int __init ocd_init(void)
+{
+	spin_lock_init(&ocd_lock);
+	ocd_debugfs_init();
+	return 0;
+}
+arch_initcall(ocd_init);
diff -urN linux-2.6.24.3/arch/avr32/kernel/process.c avr32-2.6/arch/avr32/kernel/process.c
--- linux-2.6.24.3/arch/avr32/kernel/process.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/process.c	2008-04-23 20:12:35.000000000 +0200
@@ -11,17 +11,18 @@
 #include <linux/fs.h>
 #include <linux/ptrace.h>
 #include <linux/reboot.h>
+#include <linux/tick.h>
 #include <linux/uaccess.h>
 #include <linux/unistd.h>
 
 #include <asm/sysreg.h>
 #include <asm/ocd.h>
 
+#include <asm/arch/pm.h>
+
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
 
-extern void cpu_idle_sleep(void);
-
 /*
  * This file handles the architecture-dependent parts of process handling..
  */
@@ -30,8 +31,10 @@
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
+		tick_nohz_stop_sched_tick();
 		while (!need_resched())
 			cpu_idle_sleep();
+		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
@@ -103,7 +106,7 @@
  */
 void exit_thread(void)
 {
-	/* nothing to do */
+	ocd_disable(current);
 }
 
 void flush_thread(void)
@@ -345,6 +348,10 @@
 	p->thread.cpu_context.ksp = (unsigned long)childregs;
 	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
 
+	clear_tsk_thread_flag(p, TIF_DEBUG);
+	if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
+		ocd_enable(p);
+
 	return 0;
 }
 
diff -urN linux-2.6.24.3/arch/avr32/kernel/ptrace.c avr32-2.6/arch/avr32/kernel/ptrace.c
--- linux-2.6.24.3/arch/avr32/kernel/ptrace.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/ptrace.c	2008-04-23 19:33:28.000000000 +0200
@@ -58,6 +58,7 @@
 {
 	clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
 	clear_tsk_thread_flag(child, TIF_BREAKPOINT);
+	ocd_disable(child);
 }
 
 /*
@@ -144,10 +145,6 @@
 {
 	int ret;
 
-	pr_debug("ptrace: Enabling monitor mode...\n");
-	ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT)
-			| (1 << OCD_DC_DBE_BIT));
-
 	switch (request) {
 	/* Read the word at location addr in the child process */
 	case PTRACE_PEEKTEXT:
diff -urN linux-2.6.24.3/arch/avr32/kernel/setup.c avr32-2.6/arch/avr32/kernel/setup.c
--- linux-2.6.24.3/arch/avr32/kernel/setup.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/setup.c	2008-04-23 20:12:35.000000000 +0200
@@ -273,6 +273,8 @@
 			printk(KERN_WARNING
 			       "Failed to allocate framebuffer memory\n");
 			fbmem_size = 0;
+		} else {
+			memset(__va(fbmem_start), 0, fbmem_size);
 		}
 	}
 
diff -urN linux-2.6.24.3/arch/avr32/kernel/signal.c avr32-2.6/arch/avr32/kernel/signal.c
--- linux-2.6.24.3/arch/avr32/kernel/signal.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/signal.c	2008-04-23 19:33:28.000000000 +0200
@@ -270,19 +270,12 @@
 	if (!user_mode(regs))
 		return 0;
 
-	if (try_to_freeze()) {
-		signr = 0;
-		if (!signal_pending(current))
-			goto no_signal;
-	}
-
 	if (test_thread_flag(TIF_RESTORE_SIGMASK))
 		oldset = &current->saved_sigmask;
 	else if (!oldset)
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-no_signal:
 	if (syscall) {
 		switch (regs->r12) {
 		case -ERESTART_RESTARTBLOCK:
diff -urN linux-2.6.24.3/arch/avr32/kernel/time.c avr32-2.6/arch/avr32/kernel/time.c
--- linux-2.6.24.3/arch/avr32/kernel/time.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/time.c	2008-04-23 20:12:35.000000000 +0200
@@ -1,16 +1,12 @@
 /*
  * Copyright (C) 2004-2007 Atmel Corporation
  *
- * Based on MIPS implementation arch/mips/kernel/time.c
- *   Copyright 2001 MontaVista Software Inc.
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/clk.h>
-#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <linux/time.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -27,207 +23,133 @@
 #include <asm/io.h>
 #include <asm/sections.h>
 
-/* how many counter cycles in a jiffy? */
-static u32 cycles_per_jiffy;
+#include <asm/arch/pm.h>
 
-/* the count value for the next timer interrupt */
-static u32 expirelo;
 
-cycle_t __weak read_cycle_count(void)
+static cycle_t read_cycle_count(void)
 {
 	return (cycle_t)sysreg_read(COUNT);
 }
 
-struct clocksource __weak clocksource_avr32 = {
-	.name		= "avr32",
-	.rating		= 350,
+/*
+ * The architectural cycle count registers are a fine clocksource unless
+ * the system idle loop use sleep states like "idle":  the CPU cycles
+ * measured by COUNT (and COMPARE) don't happen during sleep states.
+ * Their duration also changes if cpufreq changes the CPU clock rate.
+ * So we rate the clocksource using COUNT as very low quality.
+ */
+static struct clocksource counter = {
+	.name		= "avr32_counter",
+	.rating		= 50,
 	.read		= read_cycle_count,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 16,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
-
-struct irqaction timer_irqaction = {
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
-	.name		= "timer",
-};
-
-/*
- * By default we provide the null RTC ops
- */
-static unsigned long null_rtc_get_time(void)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
-	return mktime(2007, 1, 1, 0, 0, 0);
-}
-
-static int null_rtc_set_time(unsigned long sec)
-{
-	return 0;
-}
+	struct clock_event_device *evdev = dev_id;
 
-static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
-static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
-
-static void avr32_timer_ack(void)
-{
-	u32 count;
-
-	/* Ack this timer interrupt and set the next one */
-	expirelo += cycles_per_jiffy;
-	/* setting COMPARE to 0 stops the COUNT-COMPARE */
-	if (expirelo == 0) {
-		sysreg_write(COMPARE, expirelo + 1);
-	} else {
-		sysreg_write(COMPARE, expirelo);
-	}
+	/*
+	 * Disable the interrupt until the clockevent subsystem
+	 * reprograms it.
+	 */
+	sysreg_write(COMPARE, 0);
 
-	/* Check to see if we have missed any timer interrupts */
-	count = sysreg_read(COUNT);
-	if ((count - expirelo) < 0x7fffffff) {
-		expirelo = count + cycles_per_jiffy;
-		sysreg_write(COMPARE, expirelo);
-	}
+	evdev->event_handler(evdev);
+	return IRQ_HANDLED;
 }
 
-int __weak avr32_hpt_init(void)
-{
-	int ret;
-	unsigned long mult, shift, count_hz;
-
-	count_hz = clk_get_rate(boot_cpu_data.clk);
-	shift = clocksource_avr32.shift;
-	mult = clocksource_hz2mult(count_hz, shift);
-	clocksource_avr32.mult = mult;
-
-	{
-		u64 tmp;
-
-		tmp = TICK_NSEC;
-		tmp <<= shift;
-		tmp += mult / 2;
-		do_div(tmp, mult);
-
-		cycles_per_jiffy = tmp;
-	}
+static struct irqaction timer_irqaction = {
+	.handler	= timer_interrupt,
+	.flags		= IRQF_TIMER | IRQF_DISABLED,
+	.name		= "avr32_comparator",
+};
 
-	ret = setup_irq(0, &timer_irqaction);
-	if (ret) {
-		pr_debug("timer: could not request IRQ 0: %d\n", ret);
-		return -ENODEV;
-	}
+static int comparator_next_event(unsigned long delta,
+		struct clock_event_device *evdev)
+{
+	unsigned long	flags;
 
-	printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
-			"%lu.%03lu MHz\n",
-			((count_hz + 500) / 1000) / 1000,
-			((count_hz + 500) / 1000) % 1000);
+	raw_local_irq_save(flags);
 
-	return 0;
-}
+	/* The time to read COUNT then update COMPARE must be less
+	 * than the min_delta_ns value for this clockevent source.
+	 */
+	sysreg_write(COMPARE, (sysreg_read(COUNT) + delta) ? : 1);
 
-/*
- * Taken from MIPS c0_hpt_timer_init().
- *
- * The reason COUNT is written twice is probably to make sure we don't get any
- * timer interrupts while we are messing with the counter.
- */
-int __weak avr32_hpt_start(void)
-{
-	u32 count = sysreg_read(COUNT);
-	expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
-	sysreg_write(COUNT, expirelo - cycles_per_jiffy);
-	sysreg_write(COMPARE, expirelo);
-	sysreg_write(COUNT, count);
+	raw_local_irq_restore(flags);
 
 	return 0;
 }
 
-/*
- * local_timer_interrupt() does profiling and process accounting on a
- * per-CPU basis.
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- */
-void local_timer_interrupt(int irq, void *dev_id)
+static void comparator_mode(enum clock_event_mode mode,
+		struct clock_event_device *evdev)
 {
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-	update_process_times(user_mode(get_irq_regs()));
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		pr_debug("%s: start\n", evdev->name);
+		/* FALLTHROUGH */
+	case CLOCK_EVT_MODE_RESUME:
+		cpu_disable_idle_sleep();
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		sysreg_write(COMPARE, 0);
+		pr_debug("%s: stop\n", evdev->name);
+		cpu_enable_idle_sleep();
+		break;
+	default:
+		BUG();
+	}
 }
 
-irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
-{
-	/* ack timer interrupt and try to set next interrupt */
-	avr32_timer_ack();
-
-	/*
-	 * Call the generic timer interrupt handler
-	 */
-	write_seqlock(&xtime_lock);
-	do_timer(1);
-	write_sequnlock(&xtime_lock);
-
-	/*
-	 * In UP mode, we call local_timer_interrupt() to do profiling
-	 * and process accounting.
-	 *
-	 * SMP is not supported yet.
-	 */
-	local_timer_interrupt(irq, dev_id);
-
-	return IRQ_HANDLED;
-}
+static struct clock_event_device comparator = {
+	.name		= "avr32_comparator",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 16,
+	.rating		= 50,
+	.cpumask	= CPU_MASK_CPU0,
+	.set_next_event	= comparator_next_event,
+	.set_mode	= comparator_mode,
+};
 
 void __init time_init(void)
 {
+	unsigned long counter_hz;
 	int ret;
 
-	/*
-	 * Make sure we don't get any COMPARE interrupts before we can
-	 * handle them.
-	 */
-	sysreg_write(COMPARE, 0);
-
-	xtime.tv_sec = rtc_get_time();
+	xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
 	xtime.tv_nsec = 0;
 
 	set_normalized_timespec(&wall_to_monotonic,
 				-xtime.tv_sec, -xtime.tv_nsec);
 
-	ret = avr32_hpt_init();
-	if (ret) {
-		pr_debug("timer: failed setup: %d\n", ret);
-		return;
-	}
+	/* figure rate for counter */
+	counter_hz = clk_get_rate(boot_cpu_data.clk);
+	counter.mult = clocksource_hz2mult(counter_hz, counter.shift);
 
-	ret = clocksource_register(&clocksource_avr32);
+	ret = clocksource_register(&counter);
 	if (ret)
 		pr_debug("timer: could not register clocksource: %d\n", ret);
 
-	ret = avr32_hpt_start();
-	if (ret) {
-		pr_debug("timer: failed starting: %d\n", ret);
-		return;
-	}
-}
+	/* setup COMPARE clockevent */
+	comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
+	comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
+	comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
 
-static struct sysdev_class timer_class = {
-	set_kset_name("timer"),
-};
+	sysreg_write(COMPARE, 0);
+	timer_irqaction.dev_id = &comparator;
 
-static struct sys_device timer_device = {
-	.id	= 0,
-	.cls	= &timer_class,
-};
+	ret = setup_irq(0, &timer_irqaction);
+	if (ret)
+		pr_debug("timer: could not request IRQ 0: %d\n", ret);
+	else {
+		clockevents_register_device(&comparator);
 
-static int __init init_timer_sysfs(void)
-{
-	int err = sysdev_class_register(&timer_class);
-	if (!err)
-		err = sysdev_register(&timer_device);
-	return err;
+		pr_info("%s: irq 0, %lu.%03lu MHz\n", comparator.name,
+				((counter_hz + 500) / 1000) / 1000,
+				((counter_hz + 500) / 1000) % 1000);
+	}
 }
-
-device_initcall(init_timer_sysfs);
diff -urN linux-2.6.24.3/arch/avr32/kernel/traps.c avr32-2.6/arch/avr32/kernel/traps.c
--- linux-2.6.24.3/arch/avr32/kernel/traps.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/kernel/traps.c	2008-04-23 19:33:28.000000000 +0200
@@ -9,6 +9,7 @@
 #include <linux/bug.h>
 #include <linux/init.h>
 #include <linux/kallsyms.h>
+#include <linux/kdebug.h>
 #include <linux/module.h>
 #include <linux/notifier.h>
 #include <linux/sched.h>
@@ -107,9 +108,23 @@
 
 asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
 {
-	printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
-	show_regs_log_lvl(regs, KERN_ALERT);
-	show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
+	int ret;
+
+	nmi_enter();
+
+	ret = notify_die(DIE_NMI, "NMI", regs, 0, ecr, SIGINT);
+	switch (ret) {
+	case NOTIFY_OK:
+	case NOTIFY_STOP:
+		return;
+	case NOTIFY_BAD:
+		die("Fatal Non-Maskable Interrupt", regs, SIGINT);
+	default:
+		break;
+	}
+
+	printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
+	nmi_disable();
 }
 
 asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
diff -urN linux-2.6.24.3/arch/avr32/mach-at32ap/at32ap7000.c avr32-2.6/arch/avr32/mach-at32ap/at32ap7000.c
--- linux-2.6.24.3/arch/avr32/mach-at32ap/at32ap7000.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/mach-at32ap/at32ap7000.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,1730 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/clk.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-
-#include <asm/io.h>
-
-#include <asm/arch/at32ap7000.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
-
-#include <video/atmel_lcdc.h>
-
-#include "clock.h"
-#include "hmatrix.h"
-#include "pio.h"
-#include "pm.h"
-
-
-#define PBMEM(base)					\
-	{						\
-		.start		= base,			\
-		.end		= base + 0x3ff,		\
-		.flags		= IORESOURCE_MEM,	\
-	}
-#define IRQ(num)					\
-	{						\
-		.start		= num,			\
-		.end		= num,			\
-		.flags		= IORESOURCE_IRQ,	\
-	}
-#define NAMED_IRQ(num, _name)				\
-	{						\
-		.start		= num,			\
-		.end		= num,			\
-		.name		= _name,		\
-		.flags		= IORESOURCE_IRQ,	\
-	}
-
-/* REVISIT these assume *every* device supports DMA, but several
- * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
- */
-#define DEFINE_DEV(_name, _id)					\
-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
-static struct platform_device _name##_id##_device = {		\
-	.name		= #_name,				\
-	.id		= _id,					\
-	.dev		= {					\
-		.dma_mask = &_name##_id##_dma_mask,		\
-		.coherent_dma_mask = DMA_32BIT_MASK,		\
-	},							\
-	.resource	= _name##_id##_resource,		\
-	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
-}
-#define DEFINE_DEV_DATA(_name, _id)				\
-static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
-static struct platform_device _name##_id##_device = {		\
-	.name		= #_name,				\
-	.id		= _id,					\
-	.dev		= {					\
-		.dma_mask = &_name##_id##_dma_mask,		\
-		.platform_data	= &_name##_id##_data,		\
-		.coherent_dma_mask = DMA_32BIT_MASK,		\
-	},							\
-	.resource	= _name##_id##_resource,		\
-	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
-}
-
-#define select_peripheral(pin, periph, flags)			\
-	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
-
-#define DEV_CLK(_name, devname, bus, _index)			\
-static struct clk devname##_##_name = {				\
-	.name		= #_name,				\
-	.dev		= &devname##_device.dev,		\
-	.parent		= &bus##_clk,				\
-	.mode		= bus##_clk_mode,			\
-	.get_rate	= bus##_clk_get_rate,			\
-	.index		= _index,				\
-}
-
-static DEFINE_SPINLOCK(pm_lock);
-
-unsigned long at32ap7000_osc_rates[3] = {
-	[0] = 32768,
-	/* FIXME: these are ATSTK1002-specific */
-	[1] = 20000000,
-	[2] = 12000000,
-};
-
-static unsigned long osc_get_rate(struct clk *clk)
-{
-	return at32ap7000_osc_rates[clk->index];
-}
-
-static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
-{
-	unsigned long div, mul, rate;
-
-	if (!(control & PM_BIT(PLLEN)))
-		return 0;
-
-	div = PM_BFEXT(PLLDIV, control) + 1;
-	mul = PM_BFEXT(PLLMUL, control) + 1;
-
-	rate = clk->parent->get_rate(clk->parent);
-	rate = (rate + div / 2) / div;
-	rate *= mul;
-
-	return rate;
-}
-
-static unsigned long pll0_get_rate(struct clk *clk)
-{
-	u32 control;
-
-	control = pm_readl(PLL0);
-
-	return pll_get_rate(clk, control);
-}
-
-static unsigned long pll1_get_rate(struct clk *clk)
-{
-	u32 control;
-
-	control = pm_readl(PLL1);
-
-	return pll_get_rate(clk, control);
-}
-
-/*
- * The AT32AP7000 has five primary clock sources: One 32kHz
- * oscillator, two crystal oscillators and two PLLs.
- */
-static struct clk osc32k = {
-	.name		= "osc32k",
-	.get_rate	= osc_get_rate,
-	.users		= 1,
-	.index		= 0,
-};
-static struct clk osc0 = {
-	.name		= "osc0",
-	.get_rate	= osc_get_rate,
-	.users		= 1,
-	.index		= 1,
-};
-static struct clk osc1 = {
-	.name		= "osc1",
-	.get_rate	= osc_get_rate,
-	.index		= 2,
-};
-static struct clk pll0 = {
-	.name		= "pll0",
-	.get_rate	= pll0_get_rate,
-	.parent		= &osc0,
-};
-static struct clk pll1 = {
-	.name		= "pll1",
-	.get_rate	= pll1_get_rate,
-	.parent		= &osc0,
-};
-
-/*
- * The main clock can be either osc0 or pll0.  The boot loader may
- * have chosen one for us, so we don't really know which one until we
- * have a look at the SM.
- */
-static struct clk *main_clock;
-
-/*
- * Synchronous clocks are generated from the main clock. The clocks
- * must satisfy the constraint
- *   fCPU >= fHSB >= fPB
- * i.e. each clock must not be faster than its parent.
- */
-static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
-{
-	return main_clock->get_rate(main_clock) >> shift;
-};
-
-static void cpu_clk_mode(struct clk *clk, int enabled)
-{
-	unsigned long flags;
-	u32 mask;
-
-	spin_lock_irqsave(&pm_lock, flags);
-	mask = pm_readl(CPU_MASK);
-	if (enabled)
-		mask |= 1 << clk->index;
-	else
-		mask &= ~(1 << clk->index);
-	pm_writel(CPU_MASK, mask);
-	spin_unlock_irqrestore(&pm_lock, flags);
-}
-
-static unsigned long cpu_clk_get_rate(struct clk *clk)
-{
-	unsigned long cksel, shift = 0;
-
-	cksel = pm_readl(CKSEL);
-	if (cksel & PM_BIT(CPUDIV))
-		shift = PM_BFEXT(CPUSEL, cksel) + 1;
-
-	return bus_clk_get_rate(clk, shift);
-}
-
-static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
-{
-	u32 control;
-	unsigned long parent_rate, child_div, actual_rate, div;
-
-	parent_rate = clk->parent->get_rate(clk->parent);
-	control = pm_readl(CKSEL);
-
-	if (control & PM_BIT(HSBDIV))
-		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
-	else
-		child_div = 1;
-
-	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
-		actual_rate = parent_rate;
-		control &= ~PM_BIT(CPUDIV);
-	} else {
-		unsigned int cpusel;
-		div = (parent_rate + rate / 2) / rate;
-		if (div > child_div)
-			div = child_div;
-		cpusel = (div > 1) ? (fls(div) - 2) : 0;
-		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
-		actual_rate = parent_rate / (1 << (cpusel + 1));
-	}
-
-	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
-			clk->name, rate, actual_rate);
-
-	if (apply)
-		pm_writel(CKSEL, control);
-
-	return actual_rate;
-}
-
-static void hsb_clk_mode(struct clk *clk, int enabled)
-{
-	unsigned long flags;
-	u32 mask;
-
-	spin_lock_irqsave(&pm_lock, flags);
-	mask = pm_readl(HSB_MASK);
-	if (enabled)
-		mask |= 1 << clk->index;
-	else
-		mask &= ~(1 << clk->index);
-	pm_writel(HSB_MASK, mask);
-	spin_unlock_irqrestore(&pm_lock, flags);
-}
-
-static unsigned long hsb_clk_get_rate(struct clk *clk)
-{
-	unsigned long cksel, shift = 0;
-
-	cksel = pm_readl(CKSEL);
-	if (cksel & PM_BIT(HSBDIV))
-		shift = PM_BFEXT(HSBSEL, cksel) + 1;
-
-	return bus_clk_get_rate(clk, shift);
-}
-
-static void pba_clk_mode(struct clk *clk, int enabled)
-{
-	unsigned long flags;
-	u32 mask;
-
-	spin_lock_irqsave(&pm_lock, flags);
-	mask = pm_readl(PBA_MASK);
-	if (enabled)
-		mask |= 1 << clk->index;
-	else
-		mask &= ~(1 << clk->index);
-	pm_writel(PBA_MASK, mask);
-	spin_unlock_irqrestore(&pm_lock, flags);
-}
-
-static unsigned long pba_clk_get_rate(struct clk *clk)
-{
-	unsigned long cksel, shift = 0;
-
-	cksel = pm_readl(CKSEL);
-	if (cksel & PM_BIT(PBADIV))
-		shift = PM_BFEXT(PBASEL, cksel) + 1;
-
-	return bus_clk_get_rate(clk, shift);
-}
-
-static void pbb_clk_mode(struct clk *clk, int enabled)
-{
-	unsigned long flags;
-	u32 mask;
-
-	spin_lock_irqsave(&pm_lock, flags);
-	mask = pm_readl(PBB_MASK);
-	if (enabled)
-		mask |= 1 << clk->index;
-	else
-		mask &= ~(1 << clk->index);
-	pm_writel(PBB_MASK, mask);
-	spin_unlock_irqrestore(&pm_lock, flags);
-}
-
-static unsigned long pbb_clk_get_rate(struct clk *clk)
-{
-	unsigned long cksel, shift = 0;
-
-	cksel = pm_readl(CKSEL);
-	if (cksel & PM_BIT(PBBDIV))
-		shift = PM_BFEXT(PBBSEL, cksel) + 1;
-
-	return bus_clk_get_rate(clk, shift);
-}
-
-static struct clk cpu_clk = {
-	.name		= "cpu",
-	.get_rate	= cpu_clk_get_rate,
-	.set_rate	= cpu_clk_set_rate,
-	.users		= 1,
-};
-static struct clk hsb_clk = {
-	.name		= "hsb",
-	.parent		= &cpu_clk,
-	.get_rate	= hsb_clk_get_rate,
-};
-static struct clk pba_clk = {
-	.name		= "pba",
-	.parent		= &hsb_clk,
-	.mode		= hsb_clk_mode,
-	.get_rate	= pba_clk_get_rate,
-	.index		= 1,
-};
-static struct clk pbb_clk = {
-	.name		= "pbb",
-	.parent		= &hsb_clk,
-	.mode		= hsb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.users		= 1,
-	.index		= 2,
-};
-
-/* --------------------------------------------------------------------
- *  Generic Clock operations
- * -------------------------------------------------------------------- */
-
-static void genclk_mode(struct clk *clk, int enabled)
-{
-	u32 control;
-
-	control = pm_readl(GCCTRL(clk->index));
-	if (enabled)
-		control |= PM_BIT(CEN);
-	else
-		control &= ~PM_BIT(CEN);
-	pm_writel(GCCTRL(clk->index), control);
-}
-
-static unsigned long genclk_get_rate(struct clk *clk)
-{
-	u32 control;
-	unsigned long div = 1;
-
-	control = pm_readl(GCCTRL(clk->index));
-	if (control & PM_BIT(DIVEN))
-		div = 2 * (PM_BFEXT(DIV, control) + 1);
-
-	return clk->parent->get_rate(clk->parent) / div;
-}
-
-static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
-{
-	u32 control;
-	unsigned long parent_rate, actual_rate, div;
-
-	parent_rate = clk->parent->get_rate(clk->parent);
-	control = pm_readl(GCCTRL(clk->index));
-
-	if (rate > 3 * parent_rate / 4) {
-		actual_rate = parent_rate;
-		control &= ~PM_BIT(DIVEN);
-	} else {
-		div = (parent_rate + rate) / (2 * rate) - 1;
-		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
-		actual_rate = parent_rate / (2 * (div + 1));
-	}
-
-	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
-		clk->name, rate, actual_rate);
-
-	if (apply)
-		pm_writel(GCCTRL(clk->index), control);
-
-	return actual_rate;
-}
-
-int genclk_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 control;
-
-	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
-		clk->name, parent->name, clk->parent->name);
-
-	control = pm_readl(GCCTRL(clk->index));
-
-	if (parent == &osc1 || parent == &pll1)
-		control |= PM_BIT(OSCSEL);
-	else if (parent == &osc0 || parent == &pll0)
-		control &= ~PM_BIT(OSCSEL);
-	else
-		return -EINVAL;
-
-	if (parent == &pll0 || parent == &pll1)
-		control |= PM_BIT(PLLSEL);
-	else
-		control &= ~PM_BIT(PLLSEL);
-
-	pm_writel(GCCTRL(clk->index), control);
-	clk->parent = parent;
-
-	return 0;
-}
-
-static void __init genclk_init_parent(struct clk *clk)
-{
-	u32 control;
-	struct clk *parent;
-
-	BUG_ON(clk->index > 7);
-
-	control = pm_readl(GCCTRL(clk->index));
-	if (control & PM_BIT(OSCSEL))
-		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
-	else
-		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
-
-	clk->parent = parent;
-}
-
-/* --------------------------------------------------------------------
- *  System peripherals
- * -------------------------------------------------------------------- */
-static struct resource at32_pm0_resource[] = {
-	{
-		.start	= 0xfff00000,
-		.end	= 0xfff0007f,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(20),
-};
-
-static struct resource at32ap700x_rtc0_resource[] = {
-	{
-		.start	= 0xfff00080,
-		.end	= 0xfff000af,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(21),
-};
-
-static struct resource at32_wdt0_resource[] = {
-	{
-		.start	= 0xfff000b0,
-		.end	= 0xfff000cf,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource at32_eic0_resource[] = {
-	{
-		.start	= 0xfff00100,
-		.end	= 0xfff0013f,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(19),
-};
-
-DEFINE_DEV(at32_pm, 0);
-DEFINE_DEV(at32ap700x_rtc, 0);
-DEFINE_DEV(at32_wdt, 0);
-DEFINE_DEV(at32_eic, 0);
-
-/*
- * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
- * is always running.
- */
-static struct clk at32_pm_pclk = {
-	.name		= "pclk",
-	.dev		= &at32_pm0_device.dev,
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.users		= 1,
-	.index		= 0,
-};
-
-static struct resource intc0_resource[] = {
-	PBMEM(0xfff00400),
-};
-struct platform_device at32_intc0_device = {
-	.name		= "intc",
-	.id		= 0,
-	.resource	= intc0_resource,
-	.num_resources	= ARRAY_SIZE(intc0_resource),
-};
-DEV_CLK(pclk, at32_intc0, pbb, 1);
-
-static struct clk ebi_clk = {
-	.name		= "ebi",
-	.parent		= &hsb_clk,
-	.mode		= hsb_clk_mode,
-	.get_rate	= hsb_clk_get_rate,
-	.users		= 1,
-};
-static struct clk hramc_clk = {
-	.name		= "hramc",
-	.parent		= &hsb_clk,
-	.mode		= hsb_clk_mode,
-	.get_rate	= hsb_clk_get_rate,
-	.users		= 1,
-	.index		= 3,
-};
-
-static struct resource smc0_resource[] = {
-	PBMEM(0xfff03400),
-};
-DEFINE_DEV(smc, 0);
-DEV_CLK(pclk, smc0, pbb, 13);
-DEV_CLK(mck, smc0, hsb, 0);
-
-static struct platform_device pdc_device = {
-	.name		= "pdc",
-	.id		= 0,
-};
-DEV_CLK(hclk, pdc, hsb, 4);
-DEV_CLK(pclk, pdc, pba, 16);
-
-static struct clk pico_clk = {
-	.name		= "pico",
-	.parent		= &cpu_clk,
-	.mode		= cpu_clk_mode,
-	.get_rate	= cpu_clk_get_rate,
-	.users		= 1,
-};
-
-static struct resource dmaca0_resource[] = {
-	{
-		.start	= 0xff200000,
-		.end	= 0xff20ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(2),
-};
-DEFINE_DEV(dmaca, 0);
-DEV_CLK(hclk, dmaca0, hsb, 10);
-
-/* --------------------------------------------------------------------
- * HMATRIX
- * -------------------------------------------------------------------- */
-
-static struct clk hmatrix_clk = {
-	.name		= "hmatrix_clk",
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.index		= 2,
-	.users		= 1,
-};
-#define HMATRIX_BASE	((void __iomem *)0xfff00800)
-
-#define hmatrix_readl(reg)					\
-	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-#define hmatrix_writel(reg,value)				\
-	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
-
-/*
- * Set bits in the HMATRIX Special Function Register (SFR) used by the
- * External Bus Interface (EBI). This can be used to enable special
- * features like CompactFlash support, NAND Flash support, etc. on
- * certain chipselects.
- */
-static inline void set_ebi_sfr_bits(u32 mask)
-{
-	u32 sfr;
-
-	clk_enable(&hmatrix_clk);
-	sfr = hmatrix_readl(SFR4);
-	sfr |= mask;
-	hmatrix_writel(SFR4, sfr);
-	clk_disable(&hmatrix_clk);
-}
-
-/* --------------------------------------------------------------------
- *  System Timer/Counter (TC)
- * -------------------------------------------------------------------- */
-static struct resource at32_systc0_resource[] = {
-	PBMEM(0xfff00c00),
-	IRQ(22),
-};
-struct platform_device at32_systc0_device = {
-	.name		= "systc",
-	.id		= 0,
-	.resource	= at32_systc0_resource,
-	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
-};
-DEV_CLK(pclk, at32_systc0, pbb, 3);
-
-/* --------------------------------------------------------------------
- *  PIO
- * -------------------------------------------------------------------- */
-
-static struct resource pio0_resource[] = {
-	PBMEM(0xffe02800),
-	IRQ(13),
-};
-DEFINE_DEV(pio, 0);
-DEV_CLK(mck, pio0, pba, 10);
-
-static struct resource pio1_resource[] = {
-	PBMEM(0xffe02c00),
-	IRQ(14),
-};
-DEFINE_DEV(pio, 1);
-DEV_CLK(mck, pio1, pba, 11);
-
-static struct resource pio2_resource[] = {
-	PBMEM(0xffe03000),
-	IRQ(15),
-};
-DEFINE_DEV(pio, 2);
-DEV_CLK(mck, pio2, pba, 12);
-
-static struct resource pio3_resource[] = {
-	PBMEM(0xffe03400),
-	IRQ(16),
-};
-DEFINE_DEV(pio, 3);
-DEV_CLK(mck, pio3, pba, 13);
-
-static struct resource pio4_resource[] = {
-	PBMEM(0xffe03800),
-	IRQ(17),
-};
-DEFINE_DEV(pio, 4);
-DEV_CLK(mck, pio4, pba, 14);
-
-void __init at32_add_system_devices(void)
-{
-	platform_device_register(&at32_pm0_device);
-	platform_device_register(&at32_intc0_device);
-	platform_device_register(&at32ap700x_rtc0_device);
-	platform_device_register(&at32_wdt0_device);
-	platform_device_register(&at32_eic0_device);
-	platform_device_register(&smc0_device);
-	platform_device_register(&pdc_device);
-	platform_device_register(&dmaca0_device);
-
-	platform_device_register(&at32_systc0_device);
-
-	platform_device_register(&pio0_device);
-	platform_device_register(&pio1_device);
-	platform_device_register(&pio2_device);
-	platform_device_register(&pio3_device);
-	platform_device_register(&pio4_device);
-}
-
-/* --------------------------------------------------------------------
- *  USART
- * -------------------------------------------------------------------- */
-
-static struct atmel_uart_data atmel_usart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-static struct resource atmel_usart0_resource[] = {
-	PBMEM(0xffe00c00),
-	IRQ(6),
-};
-DEFINE_DEV_DATA(atmel_usart, 0);
-DEV_CLK(usart, atmel_usart0, pba, 3);
-
-static struct atmel_uart_data atmel_usart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-static struct resource atmel_usart1_resource[] = {
-	PBMEM(0xffe01000),
-	IRQ(7),
-};
-DEFINE_DEV_DATA(atmel_usart, 1);
-DEV_CLK(usart, atmel_usart1, pba, 4);
-
-static struct atmel_uart_data atmel_usart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-static struct resource atmel_usart2_resource[] = {
-	PBMEM(0xffe01400),
-	IRQ(8),
-};
-DEFINE_DEV_DATA(atmel_usart, 2);
-DEV_CLK(usart, atmel_usart2, pba, 5);
-
-static struct atmel_uart_data atmel_usart3_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-static struct resource atmel_usart3_resource[] = {
-	PBMEM(0xffe01800),
-	IRQ(9),
-};
-DEFINE_DEV_DATA(atmel_usart, 3);
-DEV_CLK(usart, atmel_usart3, pba, 6);
-
-static inline void configure_usart0_pins(void)
-{
-	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
-}
-
-static inline void configure_usart1_pins(void)
-{
-	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
-	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
-}
-
-static inline void configure_usart2_pins(void)
-{
-	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
-}
-
-static inline void configure_usart3_pins(void)
-{
-	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
-	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
-}
-
-static struct platform_device *__initdata at32_usarts[4];
-
-void __init at32_map_usart(unsigned int hw_id, unsigned int line)
-{
-	struct platform_device *pdev;
-
-	switch (hw_id) {
-	case 0:
-		pdev = &atmel_usart0_device;
-		configure_usart0_pins();
-		break;
-	case 1:
-		pdev = &atmel_usart1_device;
-		configure_usart1_pins();
-		break;
-	case 2:
-		pdev = &atmel_usart2_device;
-		configure_usart2_pins();
-		break;
-	case 3:
-		pdev = &atmel_usart3_device;
-		configure_usart3_pins();
-		break;
-	default:
-		return;
-	}
-
-	if (PXSEG(pdev->resource[0].start) == P4SEG) {
-		/* Addresses in the P4 segment are permanently mapped 1:1 */
-		struct atmel_uart_data *data = pdev->dev.platform_data;
-		data->regs = (void __iomem *)pdev->resource[0].start;
-	}
-
-	pdev->id = line;
-	at32_usarts[line] = pdev;
-}
-
-struct platform_device *__init at32_add_device_usart(unsigned int id)
-{
-	platform_device_register(at32_usarts[id]);
-	return at32_usarts[id];
-}
-
-struct platform_device *atmel_default_console_device;
-
-void __init at32_setup_serial_console(unsigned int usart_id)
-{
-	atmel_default_console_device = at32_usarts[usart_id];
-}
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-static struct eth_platform_data macb0_data;
-static struct resource macb0_resource[] = {
-	PBMEM(0xfff01800),
-	IRQ(25),
-};
-DEFINE_DEV_DATA(macb, 0);
-DEV_CLK(hclk, macb0, hsb, 8);
-DEV_CLK(pclk, macb0, pbb, 6);
-
-static struct eth_platform_data macb1_data;
-static struct resource macb1_resource[] = {
-	PBMEM(0xfff01c00),
-	IRQ(26),
-};
-DEFINE_DEV_DATA(macb, 1);
-DEV_CLK(hclk, macb1, hsb, 9);
-DEV_CLK(pclk, macb1, pbb, 7);
-
-struct platform_device *__init
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
-{
-	struct platform_device *pdev;
-
-	switch (id) {
-	case 0:
-		pdev = &macb0_device;
-
-		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
-		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
-		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
-		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
-		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
-		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
-		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
-		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
-		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
-		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
-
-		if (!data->is_rmii) {
-			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
-			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
-			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
-			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
-			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
-			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
-			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
-			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
-			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
-		}
-		break;
-
-	case 1:
-		pdev = &macb1_device;
-
-		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
-		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
-		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
-		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
-		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
-		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
-		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
-		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
-		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
-		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
-
-		if (!data->is_rmii) {
-			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
-			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
-			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
-			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
-			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
-			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
-			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
-			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
-			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
-		}
-		break;
-
-	default:
-		return NULL;
-	}
-
-	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
-	platform_device_register(pdev);
-
-	return pdev;
-}
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-static struct resource atmel_spi0_resource[] = {
-	PBMEM(0xffe00000),
-	IRQ(3),
-};
-DEFINE_DEV(atmel_spi, 0);
-DEV_CLK(spi_clk, atmel_spi0, pba, 0);
-
-static struct resource atmel_spi1_resource[] = {
-	PBMEM(0xffe00400),
-	IRQ(4),
-};
-DEFINE_DEV(atmel_spi, 1);
-DEV_CLK(spi_clk, atmel_spi1, pba, 1);
-
-static void __init
-at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
-		      unsigned int n, const u8 *pins)
-{
-	unsigned int pin, mode;
-
-	for (; n; n--, b++) {
-		b->bus_num = bus_num;
-		if (b->chip_select >= 4)
-			continue;
-		pin = (unsigned)b->controller_data;
-		if (!pin) {
-			pin = pins[b->chip_select];
-			b->controller_data = (void *)pin;
-		}
-		mode = AT32_GPIOF_OUTPUT;
-		if (!(b->mode & SPI_CS_HIGH))
-			mode |= AT32_GPIOF_HIGH;
-		at32_select_gpio(pin, mode);
-	}
-}
-
-struct platform_device *__init
-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
-{
-	/*
-	 * Manage the chipselects as GPIOs, normally using the same pins
-	 * the SPI controller expects; but boards can use other pins.
-	 */
-	static u8 __initdata spi0_pins[] =
-		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
-		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
-	static u8 __initdata spi1_pins[] =
-		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
-		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
-	struct platform_device *pdev;
-
-	switch (id) {
-	case 0:
-		pdev = &atmel_spi0_device;
-		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
-		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
-		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
-		at32_spi_setup_slaves(0, b, n, spi0_pins);
-		break;
-
-	case 1:
-		pdev = &atmel_spi1_device;
-		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
-		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
-		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
-		at32_spi_setup_slaves(1, b, n, spi1_pins);
-		break;
-
-	default:
-		return NULL;
-	}
-
-	spi_register_board_info(b, n);
-	platform_device_register(pdev);
-	return pdev;
-}
-
-/* --------------------------------------------------------------------
- *  TWI
- * -------------------------------------------------------------------- */
-static struct resource atmel_twi0_resource[] __initdata = {
-	PBMEM(0xffe00800),
-	IRQ(5),
-};
-static struct clk atmel_twi0_pclk = {
-	.name		= "twi_pclk",
-	.parent		= &pba_clk,
-	.mode		= pba_clk_mode,
-	.get_rate	= pba_clk_get_rate,
-	.index		= 2,
-};
-
-struct platform_device *__init at32_add_device_twi(unsigned int id)
-{
-	struct platform_device *pdev;
-
-	if (id != 0)
-		return NULL;
-
-	pdev = platform_device_alloc("atmel_twi", id);
-	if (!pdev)
-		return NULL;
-
-	if (platform_device_add_resources(pdev, atmel_twi0_resource,
-				ARRAY_SIZE(atmel_twi0_resource)))
-		goto err_add_resources;
-
-	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
-	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
-
-	atmel_twi0_pclk.dev = &pdev->dev;
-
-	platform_device_add(pdev);
-	return pdev;
-
-err_add_resources:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- * MMC
- * -------------------------------------------------------------------- */
-static struct resource atmel_mci0_resource[] __initdata = {
-	PBMEM(0xfff02400),
-	IRQ(28),
-};
-static struct clk atmel_mci0_pclk = {
-	.name		= "mci_clk",
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.index		= 9,
-};
-
-struct platform_device *__init at32_add_device_mci(unsigned int id)
-{
-	struct platform_device *pdev;
-
-	if (id != 0)
-		return NULL;
-
-	pdev = platform_device_alloc("atmel_mci", id);
-	if (!pdev)
-		return NULL;
-
-	if (platform_device_add_resources(pdev, atmel_mci0_resource,
-				ARRAY_SIZE(atmel_mci0_resource)))
-		goto err_add_resources;
-
-	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
-	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
-	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
-	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
-	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
-	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
-
-	atmel_mci0_pclk.dev = &pdev->dev;
-
-	platform_device_add(pdev);
-	return pdev;
-
-err_add_resources:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- *  LCDC
- * -------------------------------------------------------------------- */
-static struct atmel_lcdfb_info atmel_lcdfb0_data;
-static struct resource atmel_lcdfb0_resource[] = {
-	{
-		.start		= 0xff000000,
-		.end		= 0xff000fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	IRQ(1),
-	{
-		/* Placeholder for pre-allocated fb memory */
-		.start		= 0x00000000,
-		.end		= 0x00000000,
-		.flags		= 0,
-	},
-};
-DEFINE_DEV_DATA(atmel_lcdfb, 0);
-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
-static struct clk atmel_lcdfb0_pixclk = {
-	.name		= "lcdc_clk",
-	.dev		= &atmel_lcdfb0_device.dev,
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 7,
-};
-
-struct platform_device *__init
-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-		     unsigned long fbmem_start, unsigned long fbmem_len)
-{
-	struct platform_device *pdev;
-	struct atmel_lcdfb_info *info;
-	struct fb_monspecs *monspecs;
-	struct fb_videomode *modedb;
-	unsigned int modedb_size;
-
-	/*
-	 * Do a deep copy of the fb data, monspecs and modedb. Make
-	 * sure all allocations are done before setting up the
-	 * portmux.
-	 */
-	monspecs = kmemdup(data->default_monspecs,
-			   sizeof(struct fb_monspecs), GFP_KERNEL);
-	if (!monspecs)
-		return NULL;
-
-	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
-	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
-	if (!modedb)
-		goto err_dup_modedb;
-	monspecs->modedb = modedb;
-
-	switch (id) {
-	case 0:
-		pdev = &atmel_lcdfb0_device;
-		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
-		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
-		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
-		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
-		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
-		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
-		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
-		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
-		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
-		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
-		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
-		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
-		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
-		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
-		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
-		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
-		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
-		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
-		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
-		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
-
-		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
-		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-		break;
-
-	default:
-		goto err_invalid_id;
-	}
-
-	if (fbmem_len) {
-		pdev->resource[2].start = fbmem_start;
-		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
-		pdev->resource[2].flags = IORESOURCE_MEM;
-	}
-
-	info = pdev->dev.platform_data;
-	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
-	info->default_monspecs = monspecs;
-
-	platform_device_register(pdev);
-	return pdev;
-
-err_invalid_id:
-	kfree(modedb);
-err_dup_modedb:
-	kfree(monspecs);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- *  SSC
- * -------------------------------------------------------------------- */
-static struct resource ssc0_resource[] = {
-	PBMEM(0xffe01c00),
-	IRQ(10),
-};
-DEFINE_DEV(ssc, 0);
-DEV_CLK(pclk, ssc0, pba, 7);
-
-static struct resource ssc1_resource[] = {
-	PBMEM(0xffe02000),
-	IRQ(11),
-};
-DEFINE_DEV(ssc, 1);
-DEV_CLK(pclk, ssc1, pba, 8);
-
-static struct resource ssc2_resource[] = {
-	PBMEM(0xffe02400),
-	IRQ(12),
-};
-DEFINE_DEV(ssc, 2);
-DEV_CLK(pclk, ssc2, pba, 9);
-
-struct platform_device *__init
-at32_add_device_ssc(unsigned int id, unsigned int flags)
-{
-	struct platform_device *pdev;
-
-	switch (id) {
-	case 0:
-		pdev = &ssc0_device;
-		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
-		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
-		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
-		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
-		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
-		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
-		break;
-	case 1:
-		pdev = &ssc1_device;
-		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
-		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
-		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
-		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
-		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
-		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
-		break;
-	case 2:
-		pdev = &ssc2_device;
-		if (flags & ATMEL_SSC_TD)
-			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
-		if (flags & ATMEL_SSC_RD)
-			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
-		if (flags & ATMEL_SSC_TK)
-			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
-		if (flags & ATMEL_SSC_TF)
-			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
-		if (flags & ATMEL_SSC_RF)
-			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
-		if (flags & ATMEL_SSC_RK)
-			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
-		break;
-	default:
-		return NULL;
-	}
-
-	platform_device_register(pdev);
-	return pdev;
-}
-
-/* --------------------------------------------------------------------
- *  USB Device Controller
- * -------------------------------------------------------------------- */
-static struct resource usba0_resource[] __initdata = {
-	{
-		.start		= 0xff300000,
-		.end		= 0xff3fffff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= 0xfff03000,
-		.end		= 0xfff033ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	IRQ(31),
-};
-static struct clk usba0_pclk = {
-	.name		= "pclk",
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.index		= 12,
-};
-static struct clk usba0_hclk = {
-	.name		= "hclk",
-	.parent		= &hsb_clk,
-	.mode		= hsb_clk_mode,
-	.get_rate	= hsb_clk_get_rate,
-	.index		= 6,
-};
-
-struct platform_device *__init
-at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
-{
-	struct platform_device *pdev;
-
-	if (id != 0)
-		return NULL;
-
-	pdev = platform_device_alloc("atmel_usba_udc", 0);
-	if (!pdev)
-		return NULL;
-
-	if (platform_device_add_resources(pdev, usba0_resource,
-					  ARRAY_SIZE(usba0_resource)))
-		goto out_free_pdev;
-
-	if (data) {
-		if (platform_device_add_data(pdev, data, sizeof(*data)))
-			goto out_free_pdev;
-
-		if (data->vbus_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->vbus_pin, 0);
-	}
-
-	usba0_pclk.dev = &pdev->dev;
-	usba0_hclk.dev = &pdev->dev;
-
-	platform_device_add(pdev);
-
-	return pdev;
-
-out_free_pdev:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- * IDE / CompactFlash
- * -------------------------------------------------------------------- */
-static struct resource at32_smc_cs4_resource[] __initdata = {
-	{
-		.start	= 0x04000000,
-		.end	= 0x07ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(~0UL), /* Magic IRQ will be overridden */
-};
-static struct resource at32_smc_cs5_resource[] __initdata = {
-	{
-		.start	= 0x20000000,
-		.end	= 0x23ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(~0UL), /* Magic IRQ will be overridden */
-};
-
-static int __init at32_init_ide_or_cf(struct platform_device *pdev,
-		unsigned int cs, unsigned int extint)
-{
-	static unsigned int extint_pin_map[4] __initdata = {
-		GPIO_PIN_PB(25),
-		GPIO_PIN_PB(26),
-		GPIO_PIN_PB(27),
-		GPIO_PIN_PB(28),
-	};
-	static bool common_pins_initialized __initdata = false;
-	unsigned int extint_pin;
-	int ret;
-
-	if (extint >= ARRAY_SIZE(extint_pin_map))
-		return -EINVAL;
-	extint_pin = extint_pin_map[extint];
-
-	switch (cs) {
-	case 4:
-		ret = platform_device_add_resources(pdev,
-				at32_smc_cs4_resource,
-				ARRAY_SIZE(at32_smc_cs4_resource));
-		if (ret)
-			return ret;
-
-		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
-		break;
-	case 5:
-		ret = platform_device_add_resources(pdev,
-				at32_smc_cs5_resource,
-				ARRAY_SIZE(at32_smc_cs5_resource));
-		if (ret)
-			return ret;
-
-		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
-		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (!common_pins_initialized) {
-		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
-		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
-		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
-		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
-		common_pins_initialized = true;
-	}
-
-	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
-
-	pdev->resource[1].start = EIM_IRQ_BASE + extint;
-	pdev->resource[1].end = pdev->resource[1].start;
-
-	return 0;
-}
-
-struct platform_device *__init
-at32_add_device_ide(unsigned int id, unsigned int extint,
-		    struct ide_platform_data *data)
-{
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc("at32_ide", id);
-	if (!pdev)
-		goto fail;
-
-	if (platform_device_add_data(pdev, data,
-				sizeof(struct ide_platform_data)))
-		goto fail;
-
-	if (at32_init_ide_or_cf(pdev, data->cs, extint))
-		goto fail;
-
-	platform_device_add(pdev);
-	return pdev;
-
-fail:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-struct platform_device *__init
-at32_add_device_cf(unsigned int id, unsigned int extint,
-		    struct cf_platform_data *data)
-{
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc("at32_cf", id);
-	if (!pdev)
-		goto fail;
-
-	if (platform_device_add_data(pdev, data,
-				sizeof(struct cf_platform_data)))
-		goto fail;
-
-	if (at32_init_ide_or_cf(pdev, data->cs, extint))
-		goto fail;
-
-	if (data->detect_pin != GPIO_PIN_NONE)
-		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-	if (data->reset_pin != GPIO_PIN_NONE)
-		at32_select_gpio(data->reset_pin, 0);
-	if (data->vcc_pin != GPIO_PIN_NONE)
-		at32_select_gpio(data->vcc_pin, 0);
-	/* READY is used as extint, so we can't select it as gpio */
-
-	platform_device_add(pdev);
-	return pdev;
-
-fail:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- * AC97C
- * -------------------------------------------------------------------- */
-static struct resource atmel_ac97c0_resource[] __initdata = {
-	PBMEM(0xfff02800),
-	IRQ(29),
-};
-static struct clk atmel_ac97c0_pclk = {
-	.name		= "pclk",
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.index		= 10,
-};
-
-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
-{
-	struct platform_device *pdev;
-
-	if (id != 0)
-		return NULL;
-
-	pdev = platform_device_alloc("atmel_ac97c", id);
-	if (!pdev)
-		return NULL;
-
-	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
-				ARRAY_SIZE(atmel_ac97c0_resource)))
-		goto err_add_resources;
-
-	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
-	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
-	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
-	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
-
-	atmel_ac97c0_pclk.dev = &pdev->dev;
-
-	platform_device_add(pdev);
-	return pdev;
-
-err_add_resources:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- * ABDAC
- * -------------------------------------------------------------------- */
-static struct resource abdac0_resource[] __initdata = {
-	PBMEM(0xfff02000),
-	IRQ(27),
-};
-static struct clk abdac0_pclk = {
-	.name		= "pclk",
-	.parent		= &pbb_clk,
-	.mode		= pbb_clk_mode,
-	.get_rate	= pbb_clk_get_rate,
-	.index		= 8,
-};
-static struct clk abdac0_sample_clk = {
-	.name		= "sample_clk",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 6,
-};
-
-struct platform_device *__init at32_add_device_abdac(unsigned int id)
-{
-	struct platform_device *pdev;
-
-	if (id != 0)
-		return NULL;
-
-	pdev = platform_device_alloc("abdac", id);
-	if (!pdev)
-		return NULL;
-
-	if (platform_device_add_resources(pdev, abdac0_resource,
-				ARRAY_SIZE(abdac0_resource)))
-		goto err_add_resources;
-
-	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
-	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
-	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
-	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
-
-	abdac0_pclk.dev = &pdev->dev;
-	abdac0_sample_clk.dev = &pdev->dev;
-
-	platform_device_add(pdev);
-	return pdev;
-
-err_add_resources:
-	platform_device_put(pdev);
-	return NULL;
-}
-
-/* --------------------------------------------------------------------
- *  GCLK
- * -------------------------------------------------------------------- */
-static struct clk gclk0 = {
-	.name		= "gclk0",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 0,
-};
-static struct clk gclk1 = {
-	.name		= "gclk1",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 1,
-};
-static struct clk gclk2 = {
-	.name		= "gclk2",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 2,
-};
-static struct clk gclk3 = {
-	.name		= "gclk3",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 3,
-};
-static struct clk gclk4 = {
-	.name		= "gclk4",
-	.mode		= genclk_mode,
-	.get_rate	= genclk_get_rate,
-	.set_rate	= genclk_set_rate,
-	.set_parent	= genclk_set_parent,
-	.index		= 4,
-};
-
-struct clk *at32_clock_list[] = {
-	&osc32k,
-	&osc0,
-	&osc1,
-	&pll0,
-	&pll1,
-	&cpu_clk,
-	&hsb_clk,
-	&pba_clk,
-	&pbb_clk,
-	&at32_pm_pclk,
-	&at32_intc0_pclk,
-	&hmatrix_clk,
-	&ebi_clk,
-	&hramc_clk,
-	&smc0_pclk,
-	&smc0_mck,
-	&pdc_hclk,
-	&pdc_pclk,
-	&dmaca0_hclk,
-	&pico_clk,
-	&pio0_mck,
-	&pio1_mck,
-	&pio2_mck,
-	&pio3_mck,
-	&pio4_mck,
-	&at32_systc0_pclk,
-	&atmel_usart0_usart,
-	&atmel_usart1_usart,
-	&atmel_usart2_usart,
-	&atmel_usart3_usart,
-	&macb0_hclk,
-	&macb0_pclk,
-	&macb1_hclk,
-	&macb1_pclk,
-	&atmel_spi0_spi_clk,
-	&atmel_spi1_spi_clk,
-	&atmel_twi0_pclk,
-	&atmel_mci0_pclk,
-	&atmel_lcdfb0_hck1,
-	&atmel_lcdfb0_pixclk,
-	&ssc0_pclk,
-	&ssc1_pclk,
-	&ssc2_pclk,
-	&usba0_hclk,
-	&usba0_pclk,
-	&atmel_ac97c0_pclk,
-	&abdac0_pclk,
-	&abdac0_sample_clk,
-	&gclk0,
-	&gclk1,
-	&gclk2,
-	&gclk3,
-	&gclk4,
-};
-unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
-
-void __init at32_portmux_init(void)
-{
-	at32_init_pio(&pio0_device);
-	at32_init_pio(&pio1_device);
-	at32_init_pio(&pio2_device);
-	at32_init_pio(&pio3_device);
-	at32_init_pio(&pio4_device);
-}
-
-void __init at32_clock_init(void)
-{
-	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
-	int i;
-
-	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
-		main_clock = &pll0;
-		cpu_clk.parent = &pll0;
-	} else {
-		main_clock = &osc0;
-		cpu_clk.parent = &osc0;
-	}
-
-	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
-		pll0.parent = &osc1;
-	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
-		pll1.parent = &osc1;
-
-	genclk_init_parent(&gclk0);
-	genclk_init_parent(&gclk1);
-	genclk_init_parent(&gclk2);
-	genclk_init_parent(&gclk3);
-	genclk_init_parent(&gclk4);
-	genclk_init_parent(&atmel_lcdfb0_pixclk);
-	genclk_init_parent(&abdac0_sample_clk);
-
-	/*
-	 * Turn on all clocks that have at least one user already, and
-	 * turn off everything else. We only do this for module
-	 * clocks, and even though it isn't particularly pretty to
-	 * check the address of the mode function, it should do the
-	 * trick...
-	 */
-	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
-		struct clk *clk = at32_clock_list[i];
-
-		if (clk->users == 0)
-			continue;
-
-		if (clk->mode == &cpu_clk_mode)
-			cpu_mask |= 1 << clk->index;
-		else if (clk->mode == &hsb_clk_mode)
-			hsb_mask |= 1 << clk->index;
-		else if (clk->mode == &pba_clk_mode)
-			pba_mask |= 1 << clk->index;
-		else if (clk->mode == &pbb_clk_mode)
-			pbb_mask |= 1 << clk->index;
-	}
-
-	pm_writel(CPU_MASK, cpu_mask);
-	pm_writel(HSB_MASK, hsb_mask);
-	pm_writel(PBA_MASK, pba_mask);
-	pm_writel(PBB_MASK, pbb_mask);
-}
diff -urN linux-2.6.24.3/arch/avr32/mach-at32ap/at32ap700x.c avr32-2.6/arch/avr32/mach-at32ap/at32ap700x.c
--- linux-2.6.24.3/arch/avr32/mach-at32ap/at32ap700x.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/mach-at32ap/at32ap700x.c	2008-04-23 20:12:35.000000000 +0200
@@ -0,0 +1,1944 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/at32ap700x.h>
+#include <asm/arch/board.h>
+#include <asm/arch/portmux.h>
+
+#include <video/atmel_lcdc.h>
+
+#include "clock.h"
+#include "hmatrix.h"
+#include "pio.h"
+#include "pm.h"
+
+
+#define PBMEM(base)					\
+	{						\
+		.start		= base,			\
+		.end		= base + 0x3ff,		\
+		.flags		= IORESOURCE_MEM,	\
+	}
+#define IRQ(num)					\
+	{						\
+		.start		= num,			\
+		.end		= num,			\
+		.flags		= IORESOURCE_IRQ,	\
+	}
+#define NAMED_IRQ(num, _name)				\
+	{						\
+		.start		= num,			\
+		.end		= num,			\
+		.name		= _name,		\
+		.flags		= IORESOURCE_IRQ,	\
+	}
+
+/* REVISIT these assume *every* device supports DMA, but several
+ * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more.
+ */
+#define DEFINE_DEV(_name, _id)					\
+static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
+static struct platform_device _name##_id##_device = {		\
+	.name		= #_name,				\
+	.id		= _id,					\
+	.dev		= {					\
+		.dma_mask = &_name##_id##_dma_mask,		\
+		.coherent_dma_mask = DMA_32BIT_MASK,		\
+	},							\
+	.resource	= _name##_id##_resource,		\
+	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+}
+#define DEFINE_DEV_DATA(_name, _id)				\
+static u64 _name##_id##_dma_mask = DMA_32BIT_MASK;		\
+static struct platform_device _name##_id##_device = {		\
+	.name		= #_name,				\
+	.id		= _id,					\
+	.dev		= {					\
+		.dma_mask = &_name##_id##_dma_mask,		\
+		.platform_data	= &_name##_id##_data,		\
+		.coherent_dma_mask = DMA_32BIT_MASK,		\
+	},							\
+	.resource	= _name##_id##_resource,		\
+	.num_resources	= ARRAY_SIZE(_name##_id##_resource),	\
+}
+
+#define select_peripheral(pin, periph, flags)			\
+	at32_select_periph(GPIO_PIN_##pin, GPIO_##periph, flags)
+
+#define DEV_CLK(_name, devname, bus, _index)			\
+static struct clk devname##_##_name = {				\
+	.name		= #_name,				\
+	.dev		= &devname##_device.dev,		\
+	.parent		= &bus##_clk,				\
+	.mode		= bus##_clk_mode,			\
+	.get_rate	= bus##_clk_get_rate,			\
+	.index		= _index,				\
+}
+
+static DEFINE_SPINLOCK(pm_lock);
+
+unsigned long at32ap7000_osc_rates[3] = {
+	[0] = 32768,
+	/* FIXME: these are ATSTK1002-specific */
+	[1] = 20000000,
+	[2] = 12000000,
+};
+
+static unsigned long osc_get_rate(struct clk *clk)
+{
+	return at32ap7000_osc_rates[clk->index];
+}
+
+static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
+{
+	unsigned long div, mul, rate;
+
+	if (!(control & PM_BIT(PLLEN)))
+		return 0;
+
+	div = PM_BFEXT(PLLDIV, control) + 1;
+	mul = PM_BFEXT(PLLMUL, control) + 1;
+
+	rate = clk->parent->get_rate(clk->parent);
+	rate = (rate + div / 2) / div;
+	rate *= mul;
+
+	return rate;
+}
+
+static unsigned long pll0_get_rate(struct clk *clk)
+{
+	u32 control;
+
+	control = pm_readl(PLL0);
+
+	return pll_get_rate(clk, control);
+}
+
+static unsigned long pll1_get_rate(struct clk *clk)
+{
+	u32 control;
+
+	control = pm_readl(PLL1);
+
+	return pll_get_rate(clk, control);
+}
+
+/*
+ * The AT32AP7000 has five primary clock sources: One 32kHz
+ * oscillator, two crystal oscillators and two PLLs.
+ */
+static struct clk osc32k = {
+	.name		= "osc32k",
+	.get_rate	= osc_get_rate,
+	.users		= 1,
+	.index		= 0,
+};
+static struct clk osc0 = {
+	.name		= "osc0",
+	.get_rate	= osc_get_rate,
+	.users		= 1,
+	.index		= 1,
+};
+static struct clk osc1 = {
+	.name		= "osc1",
+	.get_rate	= osc_get_rate,
+	.index		= 2,
+};
+static struct clk pll0 = {
+	.name		= "pll0",
+	.get_rate	= pll0_get_rate,
+	.parent		= &osc0,
+};
+static struct clk pll1 = {
+	.name		= "pll1",
+	.get_rate	= pll1_get_rate,
+	.parent		= &osc0,
+};
+
+/*
+ * The main clock can be either osc0 or pll0.  The boot loader may
+ * have chosen one for us, so we don't really know which one until we
+ * have a look at the SM.
+ */
+static struct clk *main_clock;
+
+/*
+ * Synchronous clocks are generated from the main clock. The clocks
+ * must satisfy the constraint
+ *   fCPU >= fHSB >= fPB
+ * i.e. each clock must not be faster than its parent.
+ */
+static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift)
+{
+	return main_clock->get_rate(main_clock) >> shift;
+};
+
+static void cpu_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(CPU_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(CPU_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long cpu_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(CPUDIV))
+		shift = PM_BFEXT(CPUSEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
+	u32 control;
+	unsigned long parent_rate, child_div, actual_rate, div;
+
+	parent_rate = clk->parent->get_rate(clk->parent);
+	control = pm_readl(CKSEL);
+
+	if (control & PM_BIT(HSBDIV))
+		child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
+	else
+		child_div = 1;
+
+	if (rate > 3 * (parent_rate / 4) || child_div == 1) {
+		actual_rate = parent_rate;
+		control &= ~PM_BIT(CPUDIV);
+	} else {
+		unsigned int cpusel;
+		div = (parent_rate + rate / 2) / rate;
+		if (div > child_div)
+			div = child_div;
+		cpusel = (div > 1) ? (fls(div) - 2) : 0;
+		control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
+		actual_rate = parent_rate / (1 << (cpusel + 1));
+	}
+
+	pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
+			clk->name, rate, actual_rate);
+
+	if (apply)
+		pm_writel(CKSEL, control);
+
+	return actual_rate;
+}
+
+static void hsb_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(HSB_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(HSB_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long hsb_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(HSBDIV))
+		shift = PM_BFEXT(HSBSEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static void pba_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(PBA_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(PBA_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long pba_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(PBADIV))
+		shift = PM_BFEXT(PBASEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static void pbb_clk_mode(struct clk *clk, int enabled)
+{
+	unsigned long flags;
+	u32 mask;
+
+	spin_lock_irqsave(&pm_lock, flags);
+	mask = pm_readl(PBB_MASK);
+	if (enabled)
+		mask |= 1 << clk->index;
+	else
+		mask &= ~(1 << clk->index);
+	pm_writel(PBB_MASK, mask);
+	spin_unlock_irqrestore(&pm_lock, flags);
+}
+
+static unsigned long pbb_clk_get_rate(struct clk *clk)
+{
+	unsigned long cksel, shift = 0;
+
+	cksel = pm_readl(CKSEL);
+	if (cksel & PM_BIT(PBBDIV))
+		shift = PM_BFEXT(PBBSEL, cksel) + 1;
+
+	return bus_clk_get_rate(clk, shift);
+}
+
+static struct clk cpu_clk = {
+	.name		= "cpu",
+	.get_rate	= cpu_clk_get_rate,
+	.set_rate	= cpu_clk_set_rate,
+	.users		= 1,
+};
+static struct clk hsb_clk = {
+	.name		= "hsb",
+	.parent		= &cpu_clk,
+	.get_rate	= hsb_clk_get_rate,
+};
+static struct clk pba_clk = {
+	.name		= "pba",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 1,
+};
+static struct clk pbb_clk = {
+	.name		= "pbb",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.users		= 1,
+	.index		= 2,
+};
+
+/* --------------------------------------------------------------------
+ *  Generic Clock operations
+ * -------------------------------------------------------------------- */
+
+static void genclk_mode(struct clk *clk, int enabled)
+{
+	u32 control;
+
+	control = pm_readl(GCCTRL(clk->index));
+	if (enabled)
+		control |= PM_BIT(CEN);
+	else
+		control &= ~PM_BIT(CEN);
+	pm_writel(GCCTRL(clk->index), control);
+}
+
+static unsigned long genclk_get_rate(struct clk *clk)
+{
+	u32 control;
+	unsigned long div = 1;
+
+	control = pm_readl(GCCTRL(clk->index));
+	if (control & PM_BIT(DIVEN))
+		div = 2 * (PM_BFEXT(DIV, control) + 1);
+
+	return clk->parent->get_rate(clk->parent) / div;
+}
+
+static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
+	u32 control;
+	unsigned long parent_rate, actual_rate, div;
+
+	parent_rate = clk->parent->get_rate(clk->parent);
+	control = pm_readl(GCCTRL(clk->index));
+
+	if (rate > 3 * parent_rate / 4) {
+		actual_rate = parent_rate;
+		control &= ~PM_BIT(DIVEN);
+	} else {
+		div = (parent_rate + rate) / (2 * rate) - 1;
+		control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+		actual_rate = parent_rate / (2 * (div + 1));
+	}
+
+	dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
+		clk->name, rate, actual_rate);
+
+	if (apply)
+		pm_writel(GCCTRL(clk->index), control);
+
+	return actual_rate;
+}
+
+int genclk_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 control;
+
+	dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
+		clk->name, parent->name, clk->parent->name);
+
+	control = pm_readl(GCCTRL(clk->index));
+
+	if (parent == &osc1 || parent == &pll1)
+		control |= PM_BIT(OSCSEL);
+	else if (parent == &osc0 || parent == &pll0)
+		control &= ~PM_BIT(OSCSEL);
+	else
+		return -EINVAL;
+
+	if (parent == &pll0 || parent == &pll1)
+		control |= PM_BIT(PLLSEL);
+	else
+		control &= ~PM_BIT(PLLSEL);
+
+	pm_writel(GCCTRL(clk->index), control);
+	clk->parent = parent;
+
+	return 0;
+}
+
+static void __init genclk_init_parent(struct clk *clk)
+{
+	u32 control;
+	struct clk *parent;
+
+	BUG_ON(clk->index > 7);
+
+	control = pm_readl(GCCTRL(clk->index));
+	if (control & PM_BIT(OSCSEL))
+		parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+	else
+		parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
+
+	clk->parent = parent;
+}
+
+/* --------------------------------------------------------------------
+ *  System peripherals
+ * -------------------------------------------------------------------- */
+static struct resource at32_pm0_resource[] = {
+	{
+		.start	= 0xfff00000,
+		.end	= 0xfff0007f,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(20),
+};
+
+static struct resource at32ap700x_rtc0_resource[] = {
+	{
+		.start	= 0xfff00080,
+		.end	= 0xfff000af,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(21),
+};
+
+static struct resource at32_wdt0_resource[] = {
+	{
+		.start	= 0xfff000b0,
+		.end	= 0xfff000cf,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource at32_eic0_resource[] = {
+	{
+		.start	= 0xfff00100,
+		.end	= 0xfff0013f,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(19),
+};
+
+DEFINE_DEV(at32_pm, 0);
+DEFINE_DEV(at32ap700x_rtc, 0);
+DEFINE_DEV(at32_wdt, 0);
+DEFINE_DEV(at32_eic, 0);
+
+/*
+ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
+ * is always running.
+ */
+static struct clk at32_pm_pclk = {
+	.name		= "pclk",
+	.dev		= &at32_pm0_device.dev,
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.users		= 1,
+	.index		= 0,
+};
+
+static struct resource intc0_resource[] = {
+	PBMEM(0xfff00400),
+};
+struct platform_device at32_intc0_device = {
+	.name		= "intc",
+	.id		= 0,
+	.resource	= intc0_resource,
+	.num_resources	= ARRAY_SIZE(intc0_resource),
+};
+DEV_CLK(pclk, at32_intc0, pbb, 1);
+
+static struct clk ebi_clk = {
+	.name		= "ebi",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= hsb_clk_get_rate,
+	.users		= 1,
+};
+static struct clk hramc_clk = {
+	.name		= "hramc",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= hsb_clk_get_rate,
+	.users		= 1,
+	.index		= 3,
+};
+
+static struct resource smc0_resource[] = {
+	PBMEM(0xfff03400),
+};
+DEFINE_DEV(smc, 0);
+DEV_CLK(pclk, smc0, pbb, 13);
+DEV_CLK(mck, smc0, hsb, 0);
+
+static struct platform_device pdc_device = {
+	.name		= "pdc",
+	.id		= 0,
+};
+DEV_CLK(hclk, pdc, hsb, 4);
+DEV_CLK(pclk, pdc, pba, 16);
+
+static struct clk pico_clk = {
+	.name		= "pico",
+	.parent		= &cpu_clk,
+	.mode		= cpu_clk_mode,
+	.get_rate	= cpu_clk_get_rate,
+	.users		= 1,
+};
+
+static struct resource dmaca0_resource[] = {
+	{
+		.start	= 0xff200000,
+		.end	= 0xff20ffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(2),
+};
+DEFINE_DEV(dmaca, 0);
+DEV_CLK(hclk, dmaca0, hsb, 10);
+
+/* --------------------------------------------------------------------
+ * HMATRIX
+ * -------------------------------------------------------------------- */
+
+static struct clk hmatrix_clk = {
+	.name		= "hmatrix_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 2,
+	.users		= 1,
+};
+#define HMATRIX_BASE	((void __iomem *)0xfff00800)
+
+#define hmatrix_readl(reg)					\
+	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
+#define hmatrix_writel(reg,value)				\
+	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
+
+/*
+ * Set bits in the HMATRIX Special Function Register (SFR) used by the
+ * External Bus Interface (EBI). This can be used to enable special
+ * features like CompactFlash support, NAND Flash support, etc. on
+ * certain chipselects.
+ */
+static inline void set_ebi_sfr_bits(u32 mask)
+{
+	u32 sfr;
+
+	clk_enable(&hmatrix_clk);
+	sfr = hmatrix_readl(SFR4);
+	sfr |= mask;
+	hmatrix_writel(SFR4, sfr);
+	clk_disable(&hmatrix_clk);
+}
+
+/* --------------------------------------------------------------------
+ *  Timer/Counter (TC)
+ * -------------------------------------------------------------------- */
+
+static struct resource at32_tcb0_resource[] = {
+	PBMEM(0xfff00c00),
+	IRQ(22),
+};
+static struct platform_device at32_tcb0_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= at32_tcb0_resource,
+	.num_resources	= ARRAY_SIZE(at32_tcb0_resource),
+};
+DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
+
+static struct resource at32_tcb1_resource[] = {
+	PBMEM(0xfff01000),
+	IRQ(23),
+};
+static struct platform_device at32_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= at32_tcb1_resource,
+	.num_resources	= ARRAY_SIZE(at32_tcb1_resource),
+};
+DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
+
+/* --------------------------------------------------------------------
+ *  PIO
+ * -------------------------------------------------------------------- */
+
+static struct resource pio0_resource[] = {
+	PBMEM(0xffe02800),
+	IRQ(13),
+};
+DEFINE_DEV(pio, 0);
+DEV_CLK(mck, pio0, pba, 10);
+
+static struct resource pio1_resource[] = {
+	PBMEM(0xffe02c00),
+	IRQ(14),
+};
+DEFINE_DEV(pio, 1);
+DEV_CLK(mck, pio1, pba, 11);
+
+static struct resource pio2_resource[] = {
+	PBMEM(0xffe03000),
+	IRQ(15),
+};
+DEFINE_DEV(pio, 2);
+DEV_CLK(mck, pio2, pba, 12);
+
+static struct resource pio3_resource[] = {
+	PBMEM(0xffe03400),
+	IRQ(16),
+};
+DEFINE_DEV(pio, 3);
+DEV_CLK(mck, pio3, pba, 13);
+
+static struct resource pio4_resource[] = {
+	PBMEM(0xffe03800),
+	IRQ(17),
+};
+DEFINE_DEV(pio, 4);
+DEV_CLK(mck, pio4, pba, 14);
+
+void __init at32_add_system_devices(void)
+{
+	platform_device_register(&at32_pm0_device);
+	platform_device_register(&at32_intc0_device);
+	platform_device_register(&at32ap700x_rtc0_device);
+	platform_device_register(&at32_wdt0_device);
+	platform_device_register(&at32_eic0_device);
+	platform_device_register(&smc0_device);
+	platform_device_register(&pdc_device);
+	platform_device_register(&dmaca0_device);
+
+	platform_device_register(&at32_tcb0_device);
+	platform_device_register(&at32_tcb1_device);
+
+	platform_device_register(&pio0_device);
+	platform_device_register(&pio1_device);
+	platform_device_register(&pio2_device);
+	platform_device_register(&pio3_device);
+	platform_device_register(&pio4_device);
+}
+
+/* --------------------------------------------------------------------
+ *  PSIF
+ * -------------------------------------------------------------------- */
+static struct resource atmel_psif0_resource[] __initdata = {
+	{
+		.start	= 0xffe03c00,
+		.end	= 0xffe03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(18),
+};
+static struct clk atmel_psif0_pclk = {
+	.name		= "pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 15,
+};
+
+static struct resource atmel_psif1_resource[] __initdata = {
+	{
+		.start	= 0xffe03d00,
+		.end	= 0xffe03dff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(18),
+};
+static struct clk atmel_psif1_pclk = {
+	.name		= "pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 15,
+};
+
+struct platform_device *__init at32_add_device_psif(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	if (!(id == 0 || id == 1))
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_psif", id);
+	if (!pdev)
+		return NULL;
+
+	switch (id) {
+	case 0:
+		if (platform_device_add_resources(pdev, atmel_psif0_resource,
+					ARRAY_SIZE(atmel_psif0_resource)))
+			goto err_add_resources;
+		atmel_psif0_pclk.dev = &pdev->dev;
+		select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */
+		select_peripheral(PA(9), PERIPH_A, 0); /* DATA  */
+		break;
+	case 1:
+		if (platform_device_add_resources(pdev, atmel_psif1_resource,
+					ARRAY_SIZE(atmel_psif1_resource)))
+			goto err_add_resources;
+		atmel_psif1_pclk.dev = &pdev->dev;
+		select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */
+		select_peripheral(PB(12), PERIPH_A, 0); /* DATA  */
+		break;
+	default:
+		return NULL;
+	}
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ *  USART
+ * -------------------------------------------------------------------- */
+
+static struct atmel_uart_data atmel_usart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart0_resource[] = {
+	PBMEM(0xffe00c00),
+	IRQ(6),
+};
+DEFINE_DEV_DATA(atmel_usart, 0);
+DEV_CLK(usart, atmel_usart0, pba, 3);
+
+static struct atmel_uart_data atmel_usart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart1_resource[] = {
+	PBMEM(0xffe01000),
+	IRQ(7),
+};
+DEFINE_DEV_DATA(atmel_usart, 1);
+DEV_CLK(usart, atmel_usart1, pba, 4);
+
+static struct atmel_uart_data atmel_usart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart2_resource[] = {
+	PBMEM(0xffe01400),
+	IRQ(8),
+};
+DEFINE_DEV_DATA(atmel_usart, 2);
+DEV_CLK(usart, atmel_usart2, pba, 5);
+
+static struct atmel_uart_data atmel_usart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+static struct resource atmel_usart3_resource[] = {
+	PBMEM(0xffe01800),
+	IRQ(9),
+};
+DEFINE_DEV_DATA(atmel_usart, 3);
+DEV_CLK(usart, atmel_usart3, pba, 6);
+
+static inline void configure_usart0_pins(void)
+{
+	select_peripheral(PA(8),  PERIPH_B, 0);	/* RXD	*/
+	select_peripheral(PA(9),  PERIPH_B, 0);	/* TXD	*/
+}
+
+static inline void configure_usart1_pins(void)
+{
+	select_peripheral(PA(17), PERIPH_A, 0);	/* RXD	*/
+	select_peripheral(PA(18), PERIPH_A, 0);	/* TXD	*/
+}
+
+static inline void configure_usart2_pins(void)
+{
+	select_peripheral(PB(26), PERIPH_B, 0);	/* RXD	*/
+	select_peripheral(PB(27), PERIPH_B, 0);	/* TXD	*/
+}
+
+static inline void configure_usart3_pins(void)
+{
+	select_peripheral(PB(18), PERIPH_B, 0);	/* RXD	*/
+	select_peripheral(PB(17), PERIPH_B, 0);	/* TXD	*/
+}
+
+static struct platform_device *__initdata at32_usarts[4];
+
+void __init at32_map_usart(unsigned int hw_id, unsigned int line)
+{
+	struct platform_device *pdev;
+
+	switch (hw_id) {
+	case 0:
+		pdev = &atmel_usart0_device;
+		configure_usart0_pins();
+		break;
+	case 1:
+		pdev = &atmel_usart1_device;
+		configure_usart1_pins();
+		break;
+	case 2:
+		pdev = &atmel_usart2_device;
+		configure_usart2_pins();
+		break;
+	case 3:
+		pdev = &atmel_usart3_device;
+		configure_usart3_pins();
+		break;
+	default:
+		return;
+	}
+
+	if (PXSEG(pdev->resource[0].start) == P4SEG) {
+		/* Addresses in the P4 segment are permanently mapped 1:1 */
+		struct atmel_uart_data *data = pdev->dev.platform_data;
+		data->regs = (void __iomem *)pdev->resource[0].start;
+	}
+
+	pdev->id = line;
+	at32_usarts[line] = pdev;
+}
+
+struct platform_device *__init at32_add_device_usart(unsigned int id)
+{
+	platform_device_register(at32_usarts[id]);
+	return at32_usarts[id];
+}
+
+struct platform_device *atmel_default_console_device;
+
+void __init at32_setup_serial_console(unsigned int usart_id)
+{
+	atmel_default_console_device = at32_usarts[usart_id];
+}
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_CPU_AT32AP7000
+static struct eth_platform_data macb0_data;
+static struct resource macb0_resource[] = {
+	PBMEM(0xfff01800),
+	IRQ(25),
+};
+DEFINE_DEV_DATA(macb, 0);
+DEV_CLK(hclk, macb0, hsb, 8);
+DEV_CLK(pclk, macb0, pbb, 6);
+
+static struct eth_platform_data macb1_data;
+static struct resource macb1_resource[] = {
+	PBMEM(0xfff01c00),
+	IRQ(26),
+};
+DEFINE_DEV_DATA(macb, 1);
+DEV_CLK(hclk, macb1, hsb, 9);
+DEV_CLK(pclk, macb1, pbb, 7);
+
+struct platform_device *__init
+at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &macb0_device;
+
+		select_peripheral(PC(3),  PERIPH_A, 0);	/* TXD0	*/
+		select_peripheral(PC(4),  PERIPH_A, 0);	/* TXD1	*/
+		select_peripheral(PC(7),  PERIPH_A, 0);	/* TXEN	*/
+		select_peripheral(PC(8),  PERIPH_A, 0);	/* TXCK */
+		select_peripheral(PC(9),  PERIPH_A, 0);	/* RXD0	*/
+		select_peripheral(PC(10), PERIPH_A, 0);	/* RXD1	*/
+		select_peripheral(PC(13), PERIPH_A, 0);	/* RXER	*/
+		select_peripheral(PC(15), PERIPH_A, 0);	/* RXDV	*/
+		select_peripheral(PC(16), PERIPH_A, 0);	/* MDC	*/
+		select_peripheral(PC(17), PERIPH_A, 0);	/* MDIO	*/
+
+		if (!data->is_rmii) {
+			select_peripheral(PC(0),  PERIPH_A, 0);	/* COL	*/
+			select_peripheral(PC(1),  PERIPH_A, 0);	/* CRS	*/
+			select_peripheral(PC(2),  PERIPH_A, 0);	/* TXER	*/
+			select_peripheral(PC(5),  PERIPH_A, 0);	/* TXD2	*/
+			select_peripheral(PC(6),  PERIPH_A, 0);	/* TXD3 */
+			select_peripheral(PC(11), PERIPH_A, 0);	/* RXD2	*/
+			select_peripheral(PC(12), PERIPH_A, 0);	/* RXD3	*/
+			select_peripheral(PC(14), PERIPH_A, 0);	/* RXCK	*/
+			select_peripheral(PC(18), PERIPH_A, 0);	/* SPD	*/
+		}
+		break;
+
+	case 1:
+		pdev = &macb1_device;
+
+		select_peripheral(PD(13), PERIPH_B, 0);		/* TXD0	*/
+		select_peripheral(PD(14), PERIPH_B, 0);		/* TXD1	*/
+		select_peripheral(PD(11), PERIPH_B, 0);		/* TXEN	*/
+		select_peripheral(PD(12), PERIPH_B, 0);		/* TXCK */
+		select_peripheral(PD(10), PERIPH_B, 0);		/* RXD0	*/
+		select_peripheral(PD(6),  PERIPH_B, 0);		/* RXD1	*/
+		select_peripheral(PD(5),  PERIPH_B, 0);		/* RXER	*/
+		select_peripheral(PD(4),  PERIPH_B, 0);		/* RXDV	*/
+		select_peripheral(PD(3),  PERIPH_B, 0);		/* MDC	*/
+		select_peripheral(PD(2),  PERIPH_B, 0);		/* MDIO	*/
+
+		if (!data->is_rmii) {
+			select_peripheral(PC(19), PERIPH_B, 0);	/* COL	*/
+			select_peripheral(PC(23), PERIPH_B, 0);	/* CRS	*/
+			select_peripheral(PC(26), PERIPH_B, 0);	/* TXER	*/
+			select_peripheral(PC(27), PERIPH_B, 0);	/* TXD2	*/
+			select_peripheral(PC(28), PERIPH_B, 0);	/* TXD3 */
+			select_peripheral(PC(29), PERIPH_B, 0);	/* RXD2	*/
+			select_peripheral(PC(30), PERIPH_B, 0);	/* RXD3	*/
+			select_peripheral(PC(24), PERIPH_B, 0);	/* RXCK	*/
+			select_peripheral(PD(15), PERIPH_B, 0);	/* SPD	*/
+		}
+		break;
+
+	default:
+		return NULL;
+	}
+
+	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+	platform_device_register(pdev);
+
+	return pdev;
+}
+#endif
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+static struct resource atmel_spi0_resource[] = {
+	PBMEM(0xffe00000),
+	IRQ(3),
+};
+DEFINE_DEV(atmel_spi, 0);
+DEV_CLK(spi_clk, atmel_spi0, pba, 0);
+
+static struct resource atmel_spi1_resource[] = {
+	PBMEM(0xffe00400),
+	IRQ(4),
+};
+DEFINE_DEV(atmel_spi, 1);
+DEV_CLK(spi_clk, atmel_spi1, pba, 1);
+
+static void __init
+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
+		      unsigned int n, const u8 *pins)
+{
+	unsigned int pin, mode;
+
+	for (; n; n--, b++) {
+		b->bus_num = bus_num;
+		if (b->chip_select >= 4)
+			continue;
+		pin = (unsigned)b->controller_data;
+		if (!pin) {
+			pin = pins[b->chip_select];
+			b->controller_data = (void *)pin;
+		}
+		mode = AT32_GPIOF_OUTPUT;
+		if (!(b->mode & SPI_CS_HIGH))
+			mode |= AT32_GPIOF_HIGH;
+		at32_select_gpio(pin, mode);
+	}
+}
+
+struct platform_device *__init
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
+{
+	/*
+	 * Manage the chipselects as GPIOs, normally using the same pins
+	 * the SPI controller expects; but boards can use other pins.
+	 */
+	static u8 __initdata spi0_pins[] =
+		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
+	static u8 __initdata spi1_pins[] =
+		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &atmel_spi0_device;
+		select_peripheral(PA(0),  PERIPH_A, 0);	/* MISO	 */
+		select_peripheral(PA(1),  PERIPH_A, 0);	/* MOSI	 */
+		select_peripheral(PA(2),  PERIPH_A, 0);	/* SCK	 */
+		at32_spi_setup_slaves(0, b, n, spi0_pins);
+		break;
+
+	case 1:
+		pdev = &atmel_spi1_device;
+		select_peripheral(PB(0),  PERIPH_B, 0);	/* MISO  */
+		select_peripheral(PB(1),  PERIPH_B, 0);	/* MOSI  */
+		select_peripheral(PB(5),  PERIPH_B, 0);	/* SCK   */
+		at32_spi_setup_slaves(1, b, n, spi1_pins);
+		break;
+
+	default:
+		return NULL;
+	}
+
+	spi_register_board_info(b, n);
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  TWI
+ * -------------------------------------------------------------------- */
+static struct resource atmel_twi0_resource[] __initdata = {
+	PBMEM(0xffe00800),
+	IRQ(5),
+};
+static struct clk atmel_twi0_pclk = {
+	.name		= "twi_pclk",
+	.parent		= &pba_clk,
+	.mode		= pba_clk_mode,
+	.get_rate	= pba_clk_get_rate,
+	.index		= 2,
+};
+
+struct platform_device *__init at32_add_device_twi(unsigned int id,
+						    struct i2c_board_info *b,
+						    unsigned int n)
+{
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_twi", id);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, atmel_twi0_resource,
+				ARRAY_SIZE(atmel_twi0_resource)))
+		goto err_add_resources;
+
+	select_peripheral(PA(6),  PERIPH_A, 0);	/* SDA	*/
+	select_peripheral(PA(7),  PERIPH_A, 0);	/* SDL	*/
+
+	atmel_twi0_pclk.dev = &pdev->dev;
+
+	if (b)
+		i2c_register_board_info(id, b, n);
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ * MMC
+ * -------------------------------------------------------------------- */
+static struct resource atmel_mci0_resource[] __initdata = {
+	PBMEM(0xfff02400),
+	IRQ(28),
+};
+static struct clk atmel_mci0_pclk = {
+	.name		= "mci_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 9,
+};
+
+struct platform_device *__init
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_mci", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_resources(pdev, atmel_mci0_resource,
+				ARRAY_SIZE(atmel_mci0_resource)))
+		goto fail;
+
+	if (data && platform_device_add_data(pdev, data,
+				sizeof(struct mci_platform_data)))
+		goto fail;
+
+	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
+	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
+	select_peripheral(PA(12), PERIPH_A, 0);	/* DATA0 */
+	select_peripheral(PA(13), PERIPH_A, 0);	/* DATA1 */
+	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
+	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
+
+	if (data) {
+		if (data->detect_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->detect_pin, 0);
+		if (data->wp_pin != GPIO_PIN_NONE)
+			at32_select_gpio(data->wp_pin, 0);
+	}
+
+	atmel_mci0_pclk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ *  LCDC
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
+static struct atmel_lcdfb_info atmel_lcdfb0_data;
+static struct resource atmel_lcdfb0_resource[] = {
+	{
+		.start		= 0xff000000,
+		.end		= 0xff000fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	IRQ(1),
+	{
+		/* Placeholder for pre-allocated fb memory */
+		.start		= 0x00000000,
+		.end		= 0x00000000,
+		.flags		= 0,
+	},
+};
+DEFINE_DEV_DATA(atmel_lcdfb, 0);
+DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+static struct clk atmel_lcdfb0_pixclk = {
+	.name		= "lcdc_clk",
+	.dev		= &atmel_lcdfb0_device.dev,
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 7,
+};
+
+struct platform_device *__init
+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+		     unsigned long fbmem_start, unsigned long fbmem_len)
+{
+	struct platform_device *pdev;
+	struct atmel_lcdfb_info *info;
+	struct fb_monspecs *monspecs;
+	struct fb_videomode *modedb;
+	unsigned int modedb_size;
+
+	/*
+	 * Do a deep copy of the fb data, monspecs and modedb. Make
+	 * sure all allocations are done before setting up the
+	 * portmux.
+	 */
+	monspecs = kmemdup(data->default_monspecs,
+			   sizeof(struct fb_monspecs), GFP_KERNEL);
+	if (!monspecs)
+		return NULL;
+
+	modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
+	modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
+	if (!modedb)
+		goto err_dup_modedb;
+	monspecs->modedb = modedb;
+
+	switch (id) {
+	case 0:
+		pdev = &atmel_lcdfb0_device;
+		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
+		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
+		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
+		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
+		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
+		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
+		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
+		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
+		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
+		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
+		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
+		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
+		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
+		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
+		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
+		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
+		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
+		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
+		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
+		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+
+		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
+		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
+		break;
+
+	default:
+		goto err_invalid_id;
+	}
+
+	if (fbmem_len) {
+		pdev->resource[2].start = fbmem_start;
+		pdev->resource[2].end = fbmem_start + fbmem_len - 1;
+		pdev->resource[2].flags = IORESOURCE_MEM;
+	}
+
+	info = pdev->dev.platform_data;
+	memcpy(info, data, sizeof(struct atmel_lcdfb_info));
+	info->default_monspecs = monspecs;
+
+	platform_device_register(pdev);
+	return pdev;
+
+err_invalid_id:
+	kfree(modedb);
+err_dup_modedb:
+	kfree(monspecs);
+	return NULL;
+}
+#endif
+
+/* --------------------------------------------------------------------
+ *  PWM
+ * -------------------------------------------------------------------- */
+static struct resource atmel_pwm0_resource[] __initdata = {
+	PBMEM(0xfff01400),
+	IRQ(24),
+};
+static struct clk atmel_pwm0_mck = {
+	.name		= "mck",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 5,
+};
+
+struct platform_device *__init at32_add_device_pwm(u32 mask)
+{
+	struct platform_device *pdev;
+
+	if (!mask)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_pwm", 0);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, atmel_pwm0_resource,
+				ARRAY_SIZE(atmel_pwm0_resource)))
+		goto out_free_pdev;
+
+	if (platform_device_add_data(pdev, &mask, sizeof(mask)))
+		goto out_free_pdev;
+
+	if (mask & (1 << 0))
+		select_peripheral(PA(28), PERIPH_A, 0);
+	if (mask & (1 << 1))
+		select_peripheral(PA(29), PERIPH_A, 0);
+	if (mask & (1 << 2))
+		select_peripheral(PA(21), PERIPH_B, 0);
+	if (mask & (1 << 3))
+		select_peripheral(PA(22), PERIPH_B, 0);
+
+	atmel_pwm0_mck.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+
+	return pdev;
+
+out_free_pdev:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ *  SSC
+ * -------------------------------------------------------------------- */
+static struct resource ssc0_resource[] = {
+	PBMEM(0xffe01c00),
+	IRQ(10),
+};
+DEFINE_DEV(ssc, 0);
+DEV_CLK(pclk, ssc0, pba, 7);
+
+static struct resource ssc1_resource[] = {
+	PBMEM(0xffe02000),
+	IRQ(11),
+};
+DEFINE_DEV(ssc, 1);
+DEV_CLK(pclk, ssc1, pba, 8);
+
+static struct resource ssc2_resource[] = {
+	PBMEM(0xffe02400),
+	IRQ(12),
+};
+DEFINE_DEV(ssc, 2);
+DEV_CLK(pclk, ssc2, pba, 9);
+
+struct platform_device *__init
+at32_add_device_ssc(unsigned int id, unsigned int flags)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+	case 0:
+		pdev = &ssc0_device;
+		if (flags & ATMEL_SSC_RF)
+			select_peripheral(PA(21), PERIPH_A, 0);	/* RF */
+		if (flags & ATMEL_SSC_RK)
+			select_peripheral(PA(22), PERIPH_A, 0);	/* RK */
+		if (flags & ATMEL_SSC_TK)
+			select_peripheral(PA(23), PERIPH_A, 0);	/* TK */
+		if (flags & ATMEL_SSC_TF)
+			select_peripheral(PA(24), PERIPH_A, 0);	/* TF */
+		if (flags & ATMEL_SSC_TD)
+			select_peripheral(PA(25), PERIPH_A, 0);	/* TD */
+		if (flags & ATMEL_SSC_RD)
+			select_peripheral(PA(26), PERIPH_A, 0);	/* RD */
+		break;
+	case 1:
+		pdev = &ssc1_device;
+		if (flags & ATMEL_SSC_RF)
+			select_peripheral(PA(0), PERIPH_B, 0);	/* RF */
+		if (flags & ATMEL_SSC_RK)
+			select_peripheral(PA(1), PERIPH_B, 0);	/* RK */
+		if (flags & ATMEL_SSC_TK)
+			select_peripheral(PA(2), PERIPH_B, 0);	/* TK */
+		if (flags & ATMEL_SSC_TF)
+			select_peripheral(PA(3), PERIPH_B, 0);	/* TF */
+		if (flags & ATMEL_SSC_TD)
+			select_peripheral(PA(4), PERIPH_B, 0);	/* TD */
+		if (flags & ATMEL_SSC_RD)
+			select_peripheral(PA(5), PERIPH_B, 0);	/* RD */
+		break;
+	case 2:
+		pdev = &ssc2_device;
+		if (flags & ATMEL_SSC_TD)
+			select_peripheral(PB(13), PERIPH_A, 0);	/* TD */
+		if (flags & ATMEL_SSC_RD)
+			select_peripheral(PB(14), PERIPH_A, 0);	/* RD */
+		if (flags & ATMEL_SSC_TK)
+			select_peripheral(PB(15), PERIPH_A, 0);	/* TK */
+		if (flags & ATMEL_SSC_TF)
+			select_peripheral(PB(16), PERIPH_A, 0);	/* TF */
+		if (flags & ATMEL_SSC_RF)
+			select_peripheral(PB(17), PERIPH_A, 0);	/* RF */
+		if (flags & ATMEL_SSC_RK)
+			select_peripheral(PB(18), PERIPH_A, 0);	/* RK */
+		break;
+	default:
+		return NULL;
+	}
+
+	platform_device_register(pdev);
+	return pdev;
+}
+
+/* --------------------------------------------------------------------
+ *  USB Device Controller
+ * -------------------------------------------------------------------- */
+static struct resource usba0_resource[] __initdata = {
+	{
+		.start		= 0xff300000,
+		.end		= 0xff3fffff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= 0xfff03000,
+		.end		= 0xfff033ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	IRQ(31),
+};
+static struct clk usba0_pclk = {
+	.name		= "pclk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 12,
+};
+static struct clk usba0_hclk = {
+	.name		= "hclk",
+	.parent		= &hsb_clk,
+	.mode		= hsb_clk_mode,
+	.get_rate	= hsb_clk_get_rate,
+	.index		= 6,
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data at32_usba_ep[] __initdata = {
+	EP("ep0",     0,   64, 1, 0, 0),
+	EP("ep1",     1,  512, 2, 1, 1),
+	EP("ep2",     2,  512, 2, 1, 1),
+	EP("ep3-int", 3,   64, 3, 1, 0),
+	EP("ep4-int", 4,   64, 3, 1, 0),
+	EP("ep5",     5, 1024, 3, 1, 1),
+	EP("ep6",     6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+struct platform_device *__init
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
+{
+	/*
+	 * pdata doesn't have room for any endpoints, so we need to
+	 * append room for the ones we need right after it.
+	 */
+	struct {
+		struct usba_platform_data pdata;
+		struct usba_ep_data ep[7];
+	} usba_data;
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_usba_udc", 0);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, usba0_resource,
+					  ARRAY_SIZE(usba0_resource)))
+		goto out_free_pdev;
+
+	if (data)
+		usba_data.pdata.vbus_pin = data->vbus_pin;
+	else
+		usba_data.pdata.vbus_pin = -EINVAL;
+
+	data = &usba_data.pdata;
+	data->num_ep = ARRAY_SIZE(at32_usba_ep);
+	memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
+
+	if (platform_device_add_data(pdev, data, sizeof(usba_data)))
+		goto out_free_pdev;
+
+	if (data->vbus_pin >= 0)
+		at32_select_gpio(data->vbus_pin, 0);
+
+	usba0_pclk.dev = &pdev->dev;
+	usba0_hclk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+
+	return pdev;
+
+out_free_pdev:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ * IDE / CompactFlash
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001)
+static struct resource at32_smc_cs4_resource[] __initdata = {
+	{
+		.start	= 0x04000000,
+		.end	= 0x07ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(~0UL), /* Magic IRQ will be overridden */
+};
+static struct resource at32_smc_cs5_resource[] __initdata = {
+	{
+		.start	= 0x20000000,
+		.end	= 0x23ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	IRQ(~0UL), /* Magic IRQ will be overridden */
+};
+
+static int __init at32_init_ide_or_cf(struct platform_device *pdev,
+		unsigned int cs, unsigned int extint)
+{
+	static unsigned int extint_pin_map[4] __initdata = {
+		GPIO_PIN_PB(25),
+		GPIO_PIN_PB(26),
+		GPIO_PIN_PB(27),
+		GPIO_PIN_PB(28),
+	};
+	static bool common_pins_initialized __initdata = false;
+	unsigned int extint_pin;
+	int ret;
+
+	if (extint >= ARRAY_SIZE(extint_pin_map))
+		return -EINVAL;
+	extint_pin = extint_pin_map[extint];
+
+	switch (cs) {
+	case 4:
+		ret = platform_device_add_resources(pdev,
+				at32_smc_cs4_resource,
+				ARRAY_SIZE(at32_smc_cs4_resource));
+		if (ret)
+			return ret;
+
+		select_peripheral(PE(21), PERIPH_A, 0); /* NCS4   -> OE_N  */
+		set_ebi_sfr_bits(HMATRIX_BIT(CS4A));
+		break;
+	case 5:
+		ret = platform_device_add_resources(pdev,
+				at32_smc_cs5_resource,
+				ARRAY_SIZE(at32_smc_cs5_resource));
+		if (ret)
+			return ret;
+
+		select_peripheral(PE(22), PERIPH_A, 0); /* NCS5   -> OE_N  */
+		set_ebi_sfr_bits(HMATRIX_BIT(CS5A));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (!common_pins_initialized) {
+		select_peripheral(PE(19), PERIPH_A, 0);	/* CFCE1  -> CS0_N */
+		select_peripheral(PE(20), PERIPH_A, 0);	/* CFCE2  -> CS1_N */
+		select_peripheral(PE(23), PERIPH_A, 0); /* CFRNW  -> DIR   */
+		select_peripheral(PE(24), PERIPH_A, 0); /* NWAIT  <- IORDY */
+		common_pins_initialized = true;
+	}
+
+	at32_select_periph(extint_pin, GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
+
+	pdev->resource[1].start = EIM_IRQ_BASE + extint;
+	pdev->resource[1].end = pdev->resource[1].start;
+
+	return 0;
+}
+
+struct platform_device *__init
+at32_add_device_ide(unsigned int id, unsigned int extint,
+		    struct ide_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc("at32_ide", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct ide_platform_data)))
+		goto fail;
+
+	if (at32_init_ide_or_cf(pdev, data->cs, extint))
+		goto fail;
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+struct platform_device *__init
+at32_add_device_cf(unsigned int id, unsigned int extint,
+		    struct cf_platform_data *data)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc("at32_cf", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct cf_platform_data)))
+		goto fail;
+
+	if (at32_init_ide_or_cf(pdev, data->cs, extint))
+		goto fail;
+
+	if (data->detect_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
+	if (data->reset_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->reset_pin, 0);
+	if (data->vcc_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->vcc_pin, 0);
+	/* READY is used as extint, so we can't select it as gpio */
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+#endif
+
+/* --------------------------------------------------------------------
+ * AC97C
+ * -------------------------------------------------------------------- */
+static struct resource atmel_ac97c0_resource[] __initdata = {
+	PBMEM(0xfff02800),
+	IRQ(29),
+};
+static struct clk atmel_ac97c0_pclk = {
+	.name		= "pclk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 10,
+};
+
+struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_ac97c", id);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
+				ARRAY_SIZE(atmel_ac97c0_resource)))
+		goto err_add_resources;
+
+	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
+	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
+	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
+	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
+
+	atmel_ac97c0_pclk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ * ABDAC
+ * -------------------------------------------------------------------- */
+static struct resource abdac0_resource[] __initdata = {
+	PBMEM(0xfff02000),
+	IRQ(27),
+};
+static struct clk abdac0_pclk = {
+	.name		= "pclk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 8,
+};
+static struct clk abdac0_sample_clk = {
+	.name		= "sample_clk",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 6,
+};
+
+struct platform_device *__init at32_add_device_abdac(unsigned int id)
+{
+	struct platform_device *pdev;
+
+	if (id != 0)
+		return NULL;
+
+	pdev = platform_device_alloc("abdac", id);
+	if (!pdev)
+		return NULL;
+
+	if (platform_device_add_resources(pdev, abdac0_resource,
+				ARRAY_SIZE(abdac0_resource)))
+		goto err_add_resources;
+
+	select_peripheral(PB(20), PERIPH_A, 0);	/* DATA1	*/
+	select_peripheral(PB(21), PERIPH_A, 0);	/* DATA0	*/
+	select_peripheral(PB(22), PERIPH_A, 0);	/* DATAN1	*/
+	select_peripheral(PB(23), PERIPH_A, 0);	/* DATAN0	*/
+
+	abdac0_pclk.dev = &pdev->dev;
+	abdac0_sample_clk.dev = &pdev->dev;
+
+	platform_device_add(pdev);
+	return pdev;
+
+err_add_resources:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
+ *  GCLK
+ * -------------------------------------------------------------------- */
+static struct clk gclk0 = {
+	.name		= "gclk0",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 0,
+};
+static struct clk gclk1 = {
+	.name		= "gclk1",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 1,
+};
+static struct clk gclk2 = {
+	.name		= "gclk2",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 2,
+};
+static struct clk gclk3 = {
+	.name		= "gclk3",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 3,
+};
+static struct clk gclk4 = {
+	.name		= "gclk4",
+	.mode		= genclk_mode,
+	.get_rate	= genclk_get_rate,
+	.set_rate	= genclk_set_rate,
+	.set_parent	= genclk_set_parent,
+	.index		= 4,
+};
+
+struct clk *at32_clock_list[] = {
+	&osc32k,
+	&osc0,
+	&osc1,
+	&pll0,
+	&pll1,
+	&cpu_clk,
+	&hsb_clk,
+	&pba_clk,
+	&pbb_clk,
+	&at32_pm_pclk,
+	&at32_intc0_pclk,
+	&hmatrix_clk,
+	&ebi_clk,
+	&hramc_clk,
+	&smc0_pclk,
+	&smc0_mck,
+	&pdc_hclk,
+	&pdc_pclk,
+	&dmaca0_hclk,
+	&pico_clk,
+	&pio0_mck,
+	&pio1_mck,
+	&pio2_mck,
+	&pio3_mck,
+	&pio4_mck,
+	&at32_tcb0_t0_clk,
+	&at32_tcb1_t0_clk,
+	&atmel_psif0_pclk,
+	&atmel_psif1_pclk,
+	&atmel_usart0_usart,
+	&atmel_usart1_usart,
+	&atmel_usart2_usart,
+	&atmel_usart3_usart,
+	&atmel_pwm0_mck,
+#if defined(CONFIG_CPU_AT32AP7000)
+	&macb0_hclk,
+	&macb0_pclk,
+	&macb1_hclk,
+	&macb1_pclk,
+#endif
+	&atmel_spi0_spi_clk,
+	&atmel_spi1_spi_clk,
+	&atmel_twi0_pclk,
+	&atmel_mci0_pclk,
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
+	&atmel_lcdfb0_hck1,
+	&atmel_lcdfb0_pixclk,
+#endif
+	&ssc0_pclk,
+	&ssc1_pclk,
+	&ssc2_pclk,
+	&usba0_hclk,
+	&usba0_pclk,
+	&atmel_ac97c0_pclk,
+	&abdac0_pclk,
+	&abdac0_sample_clk,
+	&gclk0,
+	&gclk1,
+	&gclk2,
+	&gclk3,
+	&gclk4,
+};
+unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
+
+void __init at32_portmux_init(void)
+{
+	at32_init_pio(&pio0_device);
+	at32_init_pio(&pio1_device);
+	at32_init_pio(&pio2_device);
+	at32_init_pio(&pio3_device);
+	at32_init_pio(&pio4_device);
+}
+
+void __init at32_clock_init(void)
+{
+	u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+	int i;
+
+	if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+		main_clock = &pll0;
+		cpu_clk.parent = &pll0;
+	} else {
+		main_clock = &osc0;
+		cpu_clk.parent = &osc0;
+	}
+
+	if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+		pll0.parent = &osc1;
+	if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+		pll1.parent = &osc1;
+
+	genclk_init_parent(&gclk0);
+	genclk_init_parent(&gclk1);
+	genclk_init_parent(&gclk2);
+	genclk_init_parent(&gclk3);
+	genclk_init_parent(&gclk4);
+#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
+	genclk_init_parent(&atmel_lcdfb0_pixclk);
+#endif
+	genclk_init_parent(&abdac0_sample_clk);
+
+	/*
+	 * Turn on all clocks that have at least one user already, and
+	 * turn off everything else. We only do this for module
+	 * clocks, and even though it isn't particularly pretty to
+	 * check the address of the mode function, it should do the
+	 * trick...
+	 */
+	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
+		struct clk *clk = at32_clock_list[i];
+
+		if (clk->users == 0)
+			continue;
+
+		if (clk->mode == &cpu_clk_mode)
+			cpu_mask |= 1 << clk->index;
+		else if (clk->mode == &hsb_clk_mode)
+			hsb_mask |= 1 << clk->index;
+		else if (clk->mode == &pba_clk_mode)
+			pba_mask |= 1 << clk->index;
+		else if (clk->mode == &pbb_clk_mode)
+			pbb_mask |= 1 << clk->index;
+	}
+
+	pm_writel(CPU_MASK, cpu_mask);
+	pm_writel(HSB_MASK, hsb_mask);
+	pm_writel(PBA_MASK, pba_mask);
+	pm_writel(PBB_MASK, pbb_mask);
+}
diff -urN linux-2.6.24.3/arch/avr32/mach-at32ap/extint.c avr32-2.6/arch/avr32/mach-at32ap/extint.c
--- linux-2.6.24.3/arch/avr32/mach-at32ap/extint.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/mach-at32ap/extint.c	2008-04-23 19:33:29.000000000 +0200
@@ -26,16 +26,10 @@
 #define EIC_MODE				0x0014
 #define EIC_EDGE				0x0018
 #define EIC_LEVEL				0x001c
-#define EIC_TEST				0x0020
 #define EIC_NMIC				0x0024
 
-/* Bitfields in TEST */
-#define EIC_TESTEN_OFFSET			31
-#define EIC_TESTEN_SIZE				1
-
 /* Bitfields in NMIC */
-#define EIC_EN_OFFSET				0
-#define EIC_EN_SIZE				1
+#define EIC_NMIC_ENABLE				(1 << 0)
 
 /* Bit manipulation macros */
 #define EIC_BIT(name)					\
@@ -63,6 +57,9 @@
 	unsigned int first_irq;
 };
 
+static struct eic *nmi_eic;
+static bool nmi_enabled;
+
 static void eic_ack_irq(unsigned int irq)
 {
 	struct eic *eic = get_irq_chip_data(irq);
@@ -133,8 +130,11 @@
 		eic_writel(eic, EDGE, edge);
 		eic_writel(eic, LEVEL, level);
 
-		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
 			flow_type |= IRQ_LEVEL;
+			__set_irq_handler_unlocked(irq, handle_level_irq);
+		} else
+			__set_irq_handler_unlocked(irq, handle_edge_irq);
 		desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
 		desc->status |= flow_type;
 	}
@@ -154,9 +154,8 @@
 static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
 {
 	struct eic *eic = desc->handler_data;
-	struct irq_desc *ext_desc;
 	unsigned long status, pending;
-	unsigned int i, ext_irq;
+	unsigned int i;
 
 	status = eic_readl(eic, ISR);
 	pending = status & eic_readl(eic, IMR);
@@ -165,15 +164,28 @@
 		i = fls(pending) - 1;
 		pending &= ~(1 << i);
 
-		ext_irq = i + eic->first_irq;
-		ext_desc = irq_desc + ext_irq;
-		if (ext_desc->status & IRQ_LEVEL)
-			handle_level_irq(ext_irq, ext_desc);
-		else
-			handle_edge_irq(ext_irq, ext_desc);
+		generic_handle_irq(i + eic->first_irq);
 	}
 }
 
+int nmi_enable(void)
+{
+	nmi_enabled = true;
+
+	if (nmi_eic)
+		eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE);
+
+	return 0;
+}
+
+void nmi_disable(void)
+{
+	if (nmi_eic)
+		eic_writel(nmi_eic, NMIC, 0);
+
+	nmi_enabled = false;
+}
+
 static int __init eic_probe(struct platform_device *pdev)
 {
 	struct eic *eic;
@@ -214,14 +226,13 @@
 	pattern = eic_readl(eic, MODE);
 	nr_irqs = fls(pattern);
 
-	/* Trigger on falling edge unless overridden by driver */
-	eic_writel(eic, MODE, 0UL);
+	/* Trigger on low level unless overridden by driver */
 	eic_writel(eic, EDGE, 0UL);
+	eic_writel(eic, LEVEL, 0UL);
 
 	eic->chip = &eic_chip;
 
 	for (i = 0; i < nr_irqs; i++) {
-		/* NOTE the handler we set here is ignored by the demux */
 		set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
 					 handle_level_irq);
 		set_irq_chip_data(eic->first_irq + i, eic);
@@ -230,6 +241,16 @@
 	set_irq_chained_handler(int_irq, demux_eic_irq);
 	set_irq_data(int_irq, eic);
 
+	if (pdev->id == 0) {
+		nmi_eic = eic;
+		if (nmi_enabled)
+			/*
+			 * Someone tried to enable NMI before we were
+			 * ready. Do it now.
+			 */
+			nmi_enable();
+	}
+
 	dev_info(&pdev->dev,
 		 "External Interrupt Controller at 0x%p, IRQ %u\n",
 		 eic->regs, int_irq);
diff -urN linux-2.6.24.3/arch/avr32/mach-at32ap/gpio-dev.c avr32-2.6/arch/avr32/mach-at32ap/gpio-dev.c
--- linux-2.6.24.3/arch/avr32/mach-at32ap/gpio-dev.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/mach-at32ap/gpio-dev.c	2008-04-23 19:33:29.000000000 +0200
@@ -0,0 +1,573 @@
+/*
+ * GPIO /dev and configfs interface
+ *
+ * Copyright (C) 2006-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/configfs.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/poll.h>
+#include <linux/uaccess.h>
+#include <linux/wait.h>
+
+#include <asm/gpio.h>
+#include <asm/arch/portmux.h>
+
+#define GPIO_DEV_MAX			8
+
+static struct class *gpio_dev_class;
+static dev_t gpio_devt;
+
+struct gpio_item {
+	spinlock_t lock;
+
+	int enabled;
+	int initialized;
+	int port;
+	u32 pin_mask;
+	u32 oe_mask;
+
+	/* Pin state last time we read it (for blocking reads) */
+	u32 pin_state;
+	int changed;
+
+	wait_queue_head_t change_wq;
+	struct fasync_struct *async_queue;
+
+	int id;
+	struct class_device *gpio_dev;
+	struct cdev char_dev;
+	struct config_item item;
+};
+
+struct gpio_attribute {
+	struct configfs_attribute attr;
+	ssize_t (*show)(struct gpio_item *, char *);
+	ssize_t (*store)(struct gpio_item *, const char *, size_t);
+};
+
+static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
+{
+	struct gpio_item *gpio = dev_id;
+	u32 old_state, new_state;
+
+	old_state = gpio->pin_state;
+	new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
+	gpio->pin_state = new_state;
+
+	if (new_state != old_state) {
+		gpio->changed = 1;
+		wake_up_interruptible(&gpio->change_wq);
+
+		if (gpio->async_queue)
+			kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int gpio_dev_open(struct inode *inode, struct file *file)
+{
+	struct gpio_item *gpio = container_of(inode->i_cdev,
+					      struct gpio_item,
+					      char_dev);
+	unsigned int irq;
+	unsigned int i;
+	int ret;
+
+	nonseekable_open(inode, file);
+	config_item_get(&gpio->item);
+	file->private_data = gpio;
+
+	gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
+						       gpio->pin_mask);
+	gpio->changed = 1;
+
+	for (i = 0; i < 32; i++) {
+		if (gpio->pin_mask & (1 << i)) {
+			irq = gpio_to_irq(32 * gpio->port + i);
+			ret = request_irq(irq, gpio_dev_interrupt, 0,
+					  "gpio-dev", gpio);
+			if (ret)
+				goto err_irq;
+		}
+	}
+
+	return 0;
+
+err_irq:
+	while (i--) {
+		if (gpio->pin_mask & (1 << i)) {
+			irq = gpio_to_irq(32 * gpio->port + i);
+			free_irq(irq, gpio);
+		}
+	}
+
+	config_item_put(&gpio->item);
+
+	return ret;
+}
+
+static int gpio_dev_fasync(int fd, struct file *file, int mode)
+{
+	struct gpio_item *gpio = file->private_data;
+
+	return fasync_helper(fd, file, mode, &gpio->async_queue);
+}
+
+static int gpio_dev_release(struct inode *inode, struct file *file)
+{
+	struct gpio_item *gpio = file->private_data;
+	unsigned int irq;
+	unsigned int i;
+
+	gpio_dev_fasync(-1, file, 0);
+
+	for (i = 0; i < 32; i++) {
+		if (gpio->pin_mask & (1 << i)) {
+			irq = gpio_to_irq(32 * gpio->port + i);
+			free_irq(irq, gpio);
+		}
+	}
+
+	config_item_put(&gpio->item);
+
+	return 0;
+}
+
+static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
+{
+	struct gpio_item *gpio = file->private_data;
+	unsigned int mask = 0;
+
+	poll_wait(file, &gpio->change_wq, wait);
+	if (gpio->changed)
+		mask |= POLLIN | POLLRDNORM;
+
+	return mask;
+}
+
+static ssize_t gpio_dev_read(struct file *file, char __user *buf,
+			     size_t count, loff_t *offset)
+{
+	struct gpio_item *gpio = file->private_data;
+	u32 value;
+
+	spin_lock_irq(&gpio->lock);
+	while (!gpio->changed) {
+		spin_unlock_irq(&gpio->lock);
+
+		if (file->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
+		if (wait_event_interruptible(gpio->change_wq, gpio->changed))
+			return -ERESTARTSYS;
+
+		spin_lock_irq(&gpio->lock);
+	}
+
+	gpio->changed = 0;
+	value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
+
+	spin_unlock_irq(&gpio->lock);
+
+	count = min(count, (size_t)4);
+	if (copy_to_user(buf, &value, count))
+		return -EFAULT;
+
+	return count;
+}
+
+static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
+			      size_t count, loff_t *offset)
+{
+	struct gpio_item *gpio = file->private_data;
+	u32 value = 0;
+	u32 mask = ~0UL;
+
+	count = min(count, (size_t)4);
+	if (copy_from_user(&value, buf, count))
+		return -EFAULT;
+
+	/* Assuming big endian */
+	mask <<= (4 - count) * 8;
+	mask &= gpio->pin_mask;
+
+	at32_gpio_set_value_multiple(gpio->port, value, mask);
+
+	return count;
+}
+
+static struct file_operations gpio_dev_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.open		= gpio_dev_open,
+	.release	= gpio_dev_release,
+	.fasync		= gpio_dev_fasync,
+	.poll		= gpio_dev_poll,
+	.read		= gpio_dev_read,
+	.write		= gpio_dev_write,
+};
+
+static struct gpio_item *to_gpio_item(struct config_item *item)
+{
+	return item ? container_of(item, struct gpio_item, item) : NULL;
+}
+
+static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
+{
+	return sprintf(page, "%d\n", gpio->port);
+}
+
+static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
+				  const char *page, size_t count)
+{
+	unsigned long id;
+	char *p = (char *)page;
+	ssize_t ret = -EINVAL;
+
+	id = simple_strtoul(p, &p, 0);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	/* Switching PIO is not allowed when live... */
+	spin_lock(&gpio->lock);
+	if (!gpio->enabled) {
+		ret = -ENXIO;
+		if (at32_gpio_port_is_valid(id)) {
+			gpio->port = id;
+			ret = count;
+		}
+	}
+	spin_unlock(&gpio->lock);
+
+	return ret;
+}
+
+static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
+{
+	return sprintf(page, "0x%08x\n", gpio->pin_mask);
+}
+
+static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
+				   const char *page, size_t count)
+{
+	u32 new_mask;
+	char *p = (char *)page;
+	ssize_t ret = -EINVAL;
+
+	new_mask = simple_strtoul(p, &p, 0);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	/* Can't update the pin mask while live. */
+	spin_lock(&gpio->lock);
+	if (!gpio->enabled) {
+		gpio->oe_mask &= new_mask;
+		gpio->pin_mask = new_mask;
+		ret = count;
+	}
+	spin_unlock(&gpio->lock);
+
+	return ret;
+}
+
+static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
+{
+	return sprintf(page, "0x%08x\n", gpio->oe_mask);
+}
+
+static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
+				  const char *page, size_t count)
+{
+	u32 mask;
+	char *p = (char *)page;
+	ssize_t ret = -EINVAL;
+
+	mask = simple_strtoul(p, &p, 0);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	spin_lock(&gpio->lock);
+	if (!gpio->enabled) {
+		gpio->oe_mask = mask & gpio->pin_mask;
+		ret = count;
+	}
+	spin_unlock(&gpio->lock);
+
+	return ret;
+}
+
+static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
+{
+	return sprintf(page, "%d\n", gpio->enabled);
+}
+
+static ssize_t gpio_store_enabled(struct gpio_item *gpio,
+				  const char *page, size_t count)
+{
+	char *p = (char *)page;
+	int enabled;
+	int ret;
+
+	enabled = simple_strtoul(p, &p, 0);
+	if (!p || (*p && (*p != '\n')))
+		return -EINVAL;
+
+	/* make it a boolean value */
+	enabled = !!enabled;
+
+	if (gpio->enabled == enabled)
+		/* No change; do nothing. */
+		return count;
+
+	BUG_ON(gpio->id >= GPIO_DEV_MAX);
+
+	if (!enabled) {
+		class_device_unregister(gpio->gpio_dev);
+		cdev_del(&gpio->char_dev);
+		at32_deselect_pins(gpio->port, gpio->pin_mask);
+		gpio->initialized = 0;
+	} else {
+		if (gpio->port < 0 || !gpio->pin_mask)
+			return -ENODEV;
+	}
+
+	/* Disallow any updates to gpio_id or pin_mask */
+	spin_lock(&gpio->lock);
+	gpio->enabled = enabled;
+	spin_unlock(&gpio->lock);
+
+	if (!enabled)
+		return count;
+
+	/* Now, try to allocate the pins */
+	ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
+	if (ret)
+		goto err_alloc_pins;
+
+	gpio->initialized = 1;
+
+	cdev_init(&gpio->char_dev, &gpio_dev_fops);
+	gpio->char_dev.owner = THIS_MODULE;
+	ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
+	if (ret < 0)
+		goto err_cdev_add;
+	gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
+					     MKDEV(MAJOR(gpio_devt), gpio->id),
+					     NULL,
+					     "gpio%d", gpio->id);
+	if (IS_ERR(gpio->gpio_dev)) {
+		printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
+		ret = PTR_ERR(gpio->gpio_dev);
+		goto err_class_dev;
+	}
+
+	printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
+	       gpio->id, gpio->port, gpio->pin_mask,
+	       MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
+
+	return 0;
+
+err_class_dev:
+	cdev_del(&gpio->char_dev);
+err_cdev_add:
+	at32_deselect_pins(gpio->port, gpio->pin_mask);
+	gpio->initialized = 0;
+err_alloc_pins:
+	spin_lock(&gpio->lock);
+	gpio->enabled = 0;
+	spin_unlock(&gpio->lock);
+
+	return ret;
+}
+
+static struct gpio_attribute gpio_item_attr_gpio_id = {
+	.attr = {
+		.ca_owner = THIS_MODULE,
+		.ca_name = "gpio_id",
+		.ca_mode = S_IRUGO | S_IWUSR,
+	},
+	.show = gpio_show_gpio_id,
+	.store = gpio_store_gpio_id,
+};
+static struct gpio_attribute gpio_item_attr_pin_mask = {
+	.attr = {
+		.ca_owner = THIS_MODULE,
+		.ca_name = "pin_mask",
+		.ca_mode = S_IRUGO | S_IWUSR,
+	},
+	.show = gpio_show_pin_mask,
+	.store = gpio_store_pin_mask,
+};
+static struct gpio_attribute gpio_item_attr_oe_mask = {
+	.attr = {
+		.ca_owner = THIS_MODULE,
+		.ca_name = "oe_mask",
+		.ca_mode = S_IRUGO | S_IWUSR,
+	},
+	.show = gpio_show_oe_mask,
+	.store = gpio_store_oe_mask,
+};
+static struct gpio_attribute gpio_item_attr_enabled = {
+	.attr = {
+		.ca_owner = THIS_MODULE,
+		.ca_name = "enabled",
+		.ca_mode = S_IRUGO | S_IWUSR,
+	},
+	.show = gpio_show_enabled,
+	.store = gpio_store_enabled,
+};
+
+static struct configfs_attribute *gpio_item_attrs[] = {
+	&gpio_item_attr_gpio_id.attr,
+	&gpio_item_attr_pin_mask.attr,
+	&gpio_item_attr_oe_mask.attr,
+	&gpio_item_attr_enabled.attr,
+	NULL,
+};
+
+static ssize_t gpio_show_attr(struct config_item *item,
+			      struct configfs_attribute *attr,
+			      char *page)
+{
+	struct gpio_item *gpio_item = to_gpio_item(item);
+	struct gpio_attribute *gpio_attr
+		= container_of(attr, struct gpio_attribute, attr);
+	ssize_t ret = 0;
+
+	if (gpio_attr->show)
+		ret = gpio_attr->show(gpio_item, page);
+	return ret;
+}
+
+static ssize_t gpio_store_attr(struct config_item *item,
+			       struct configfs_attribute *attr,
+			       const char *page, size_t count)
+{
+	struct gpio_item *gpio_item = to_gpio_item(item);
+	struct gpio_attribute *gpio_attr
+		= container_of(attr, struct gpio_attribute, attr);
+	ssize_t ret = -EINVAL;
+
+	if (gpio_attr->store)
+		ret = gpio_attr->store(gpio_item, page, count);
+	return ret;
+}
+
+static void gpio_release(struct config_item *item)
+{
+	kfree(to_gpio_item(item));
+}
+
+static struct configfs_item_operations gpio_item_ops = {
+	.release		= gpio_release,
+	.show_attribute		= gpio_show_attr,
+	.store_attribute	= gpio_store_attr,
+};
+
+static struct config_item_type gpio_item_type = {
+	.ct_item_ops	= &gpio_item_ops,
+	.ct_attrs	= gpio_item_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_item *gpio_make_item(struct config_group *group,
+					  const char *name)
+{
+	static int next_id;
+	struct gpio_item *gpio;
+
+	if (next_id >= GPIO_DEV_MAX)
+		return NULL;
+
+	gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
+	if (!gpio)
+		return NULL;
+
+	gpio->id = next_id++;
+	config_item_init_type_name(&gpio->item, name, &gpio_item_type);
+	spin_lock_init(&gpio->lock);
+	init_waitqueue_head(&gpio->change_wq);
+
+	return &gpio->item;
+}
+
+static void gpio_drop_item(struct config_group *group,
+			   struct config_item *item)
+{
+	struct gpio_item *gpio = to_gpio_item(item);
+
+	spin_lock(&gpio->lock);
+	if (gpio->enabled) {
+		class_device_unregister(gpio->gpio_dev);
+		cdev_del(&gpio->char_dev);
+	}
+
+	if (gpio->initialized) {
+		at32_deselect_pins(gpio->port, gpio->pin_mask);
+		gpio->initialized = 0;
+		gpio->enabled = 0;
+	}
+	spin_unlock(&gpio->lock);
+}
+
+static struct configfs_group_operations gpio_group_ops = {
+	.make_item	= gpio_make_item,
+	.drop_item	= gpio_drop_item,
+};
+
+static struct config_item_type gpio_group_type = {
+	.ct_group_ops	= &gpio_group_ops,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct configfs_subsystem gpio_subsys = {
+	.su_group = {
+		.cg_item = {
+			 .ci_namebuf = "gpio",
+			 .ci_type = &gpio_group_type,
+		 },
+	},
+};
+
+static int __init gpio_dev_init(void)
+{
+	int err;
+
+	gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
+	if (IS_ERR(gpio_dev_class)) {
+		err = PTR_ERR(gpio_dev_class);
+		goto err_class_create;
+	}
+
+	err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
+	if (err < 0)
+		goto err_alloc_chrdev;
+
+	/* Configfs initialization */
+	config_group_init(&gpio_subsys.su_group);
+	mutex_init(&gpio_subsys.su_mutex);
+	err = configfs_register_subsystem(&gpio_subsys);
+	if (err)
+		goto err_register_subsys;
+
+	return 0;
+
+err_register_subsys:
+	unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
+err_alloc_chrdev:
+	class_destroy(gpio_dev_class);
+err_class_create:
+	printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
+	return err;
+}
+late_initcall(gpio_dev_init);
diff -urN linux-2.6.24.3/arch/avr32/mach-at32ap/intc.c avr32-2.6/arch/avr32/mach-at32ap/intc.c
--- linux-2.6.24.3/arch/avr32/mach-at32ap/intc.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/mach-at32ap/intc.c	2008-04-23 20:12:35.000000000 +0200
@@ -13,7 +13,6 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 
-#include <asm/intc.h>
 #include <asm/io.h>
 
 #include "intc.h"
diff -urN linux-2.6.24.3/arch/avr32/mach-at32ap/Kconfig avr32-2.6/arch/avr32/mach-at32ap/Kconfig
--- linux-2.6.24.3/arch/avr32/mach-at32ap/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/mach-at32ap/Kconfig	2008-04-23 19:33:29.000000000 +0200
@@ -3,9 +3,9 @@
 menu "Atmel AVR32 AP options"
 
 choice
-	prompt "AT32AP7000 static memory bus width"
-	depends on CPU_AT32AP7000
-	default AP7000_16_BIT_SMC
+	prompt "AT32AP700x static memory bus width"
+	depends on CPU_AT32AP700X
+	default AP700X_16_BIT_SMC
 	help
 	  Define the width of the AP7000 external static memory interface.
 	  This is used to determine how to mangle the address and/or data
@@ -15,17 +15,24 @@
 	  width for all chip selects, excluding the flash (which is using
 	  raw access and is thus not affected by any of this.)
 
-config AP7000_32_BIT_SMC
+config AP700X_32_BIT_SMC
 	bool "32 bit"
 
-config AP7000_16_BIT_SMC
+config AP700X_16_BIT_SMC
 	bool "16 bit"
 
-config AP7000_8_BIT_SMC
+config AP700X_8_BIT_SMC
 	bool "8 bit"
 
 endchoice
 
+config GPIO_DEV
+	bool "GPIO /dev interface"
+	select CONFIGFS_FS
+	default n
+	help
+	  Say `Y' to enable a /dev interface to the GPIO pins.
+
 endmenu
 
 endif # PLATFORM_AT32AP
diff -urN linux-2.6.24.3/arch/avr32/mach-at32ap/Makefile avr32-2.6/arch/avr32/mach-at32ap/Makefile
--- linux-2.6.24.3/arch/avr32/mach-at32ap/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/mach-at32ap/Makefile	2008-04-23 20:12:35.000000000 +0200
@@ -1,4 +1,4 @@
 obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
-obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
-obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
+obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
+obj-$(CONFIG_GPIO_DEV)		+= gpio-dev.o
diff -urN linux-2.6.24.3/arch/avr32/mach-at32ap/pio.c avr32-2.6/arch/avr32/mach-at32ap/pio.c
--- linux-2.6.24.3/arch/avr32/mach-at32ap/pio.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/mach-at32ap/pio.c	2008-04-23 20:12:35.000000000 +0200
@@ -162,6 +162,82 @@
 	dump_stack();
 }
 
+#ifdef CONFIG_GPIO_DEV
+
+/* Gang allocators and accessors; used by the GPIO /dev driver */
+int at32_gpio_port_is_valid(unsigned int port)
+{
+	return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
+}
+
+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
+{
+	struct pio_device *pio;
+	u32 old, new;
+
+	pio = &pio_dev[port];
+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
+
+	/* Try to allocate the pins */
+	do {
+		old = pio->pinmux_mask;
+		if (old & pins)
+			return -EBUSY;
+
+		new = old | pins;
+	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
+
+	/* That went well, now configure the port */
+	pio_writel(pio, OER, oe_mask);
+	pio_writel(pio, PER, pins);
+
+	return 0;
+}
+
+void at32_deselect_pins(unsigned int port, u32 pins)
+{
+	struct pio_device *pio;
+	u32 old, new;
+
+	pio = &pio_dev[port];
+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
+
+	/* Return to a "safe" mux configuration */
+	pio_writel(pio, PUER, pins);
+	pio_writel(pio, ODR, pins);
+
+	/* Deallocate the pins */
+	do {
+		old = pio->pinmux_mask;
+		new = old & ~pins;
+	} while (cmpxchg(&pio->pinmux_mask, old, new) != old);
+}
+
+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
+{
+	struct pio_device *pio;
+
+	pio = &pio_dev[port];
+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
+
+	return pio_readl(pio, PDSR) & pins;
+}
+
+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
+{
+	struct pio_device *pio;
+
+	pio = &pio_dev[port];
+	BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
+
+	/* No atomic updates for now... */
+	pio_writel(pio, CODR, ~value & mask);
+	pio_writel(pio, SODR, value & mask);
+}
+
+#endif /* CONFIG_GPIO_DEV */
+
+
 /*--------------------------------------------------------------------------*/
 
 /* GPIO API */
diff -urN linux-2.6.24.3/arch/avr32/mach-at32ap/pm-at32ap700x.S avr32-2.6/arch/avr32/mach-at32ap/pm-at32ap700x.S
--- linux-2.6.24.3/arch/avr32/mach-at32ap/pm-at32ap700x.S	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/mach-at32ap/pm-at32ap700x.S	2008-04-23 20:12:35.000000000 +0200
@@ -0,0 +1,66 @@
+/*
+ * Low-level Power Management code.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/arch/pm.h>
+
+	.section .bss, "wa", @nobits
+	.global	disable_idle_sleep
+	.type	disable_idle_sleep, @object
+disable_idle_sleep:
+	.int	4
+	.size	disable_idle_sleep, . - disable_idle_sleep
+
+	/* Keep this close to the irq handlers */
+	.section .irq.text, "ax", @progbits
+
+	/*
+	 * void cpu_enter_idle(void)
+	 *
+	 * Put the CPU into "idle" mode, in which it will consume
+	 * significantly less power.
+	 *
+	 * If an interrupt comes along in the window between
+	 * unmask_interrupts and the sleep instruction below, the
+	 * interrupt code will adjust the return address so that we
+	 * never execute the sleep instruction. This is required
+	 * because the AP7000 doesn't unmask interrupts when entering
+	 * sleep modes; later CPUs may not need this workaround.
+	 */
+	.global	cpu_enter_idle
+	.type	cpu_enter_idle, @function
+cpu_enter_idle:
+	mask_interrupts
+	get_thread_info r8
+	ld.w	r9, r8[TI_flags]
+	bld	r9, TIF_NEED_RESCHED
+	brcs	.Lret_from_sleep
+	sbr	r9, TIF_CPU_GOING_TO_SLEEP
+	st.w	r8[TI_flags], r9
+	unmask_interrupts
+	sleep	CPU_SLEEP_IDLE
+	.size	cpu_idle_sleep, . - cpu_idle_sleep
+
+	/*
+	 * Common return path for PM functions that don't run from
+	 * SRAM.
+	 */
+	.global cpu_idle_skip_sleep
+	.type	cpu_idle_skip_sleep, @function
+cpu_idle_skip_sleep:
+	mask_interrupts
+	ld.w	r9, r8[TI_flags]
+	cbr	r9, TIF_CPU_GOING_TO_SLEEP
+	st.w	r8[TI_flags], r9
+.Lret_from_sleep:
+	unmask_interrupts
+	retal	r12
+	.size	cpu_idle_skip_sleep, . - cpu_idle_skip_sleep
diff -urN linux-2.6.24.3/arch/avr32/mach-at32ap/time-tc.c avr32-2.6/arch/avr32/mach-at32ap/time-tc.c
--- linux-2.6.24.3/arch/avr32/mach-at32ap/time-tc.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/mach-at32ap/time-tc.c	1970-01-01 01:00:00.000000000 +0100
@@ -1,218 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Atmel Corporation
- *
- * Based on MIPS implementation arch/mips/kernel/time.c
- *   Copyright 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/clocksource.h>
-#include <linux/time.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/sysdev.h>
-#include <linux/err.h>
-
-#include <asm/div64.h>
-#include <asm/sysreg.h>
-#include <asm/io.h>
-#include <asm/sections.h>
-
-#include <asm/arch/time.h>
-
-/* how many counter cycles in a jiffy? */
-static u32 cycles_per_jiffy;
-
-/* the count value for the next timer interrupt */
-static u32 expirelo;
-
-/* the I/O registers of the TC module */
-static void __iomem *ioregs;
-
-cycle_t read_cycle_count(void)
-{
-	return (cycle_t)timer_read(ioregs, 0, CV);
-}
-
-struct clocksource clocksource_avr32 = {
-	.name		= "avr32",
-	.rating		= 342,
-	.read		= read_cycle_count,
-	.mask		= CLOCKSOURCE_MASK(16),
-	.shift		= 16,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void avr32_timer_ack(void)
-{
-	u16 count = expirelo;
-
-	/* Ack this timer interrupt and set the next one, use a u16
-	 * variable so it will wrap around correctly */
-	count += cycles_per_jiffy;
-	expirelo = count;
-	timer_write(ioregs, 0, RC, expirelo);
-
-	/* Check to see if we have missed any timer interrupts */
-	count = timer_read(ioregs, 0, CV);
-	if ((count - expirelo) < 0x7fff) {
-		expirelo = count + cycles_per_jiffy;
-		timer_write(ioregs, 0, RC, expirelo);
-	}
-}
-
-u32 avr32_hpt_read(void)
-{
-	return timer_read(ioregs, 0, CV);
-}
-
-static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
-{
-	unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
-	unsigned int divs[] = { 4, 8, 16, 32 };
-	int divs_size = ARRAY_SIZE(divs);
-	int i = 0;
-	unsigned long count_hz;
-	unsigned long shift;
-	unsigned long mult;
-	int clock_div = -1;
-	u64 tmp;
-
-	shift = clocksource_avr32.shift;
-
-	do {
-		count_hz = clk_get_rate(pclk) / divs[i];
-		mult = clocksource_hz2mult(count_hz, shift);
-		clocksource_avr32.mult = mult;
-
-		tmp = TICK_NSEC;
-		tmp <<= shift;
-		tmp += mult / 2;
-		do_div(tmp, mult);
-
-		cycles_per_jiffy = tmp;
-	} while (cycles_per_jiffy > cycles_max && ++i < divs_size);
-
-	clock_div = i + 1;
-
-	if (clock_div > divs_size) {
-		pr_debug("timer: could not calculate clock divider\n");
-		return -EFAULT;
-	}
-
-	/* Set the clock divider */
-	timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
-
-	return 0;
-}
-
-int avr32_hpt_init(unsigned int count)
-{
-	struct resource *regs;
-	struct clk *pclk;
-	int irq = -1;
-	int ret = 0;
-
-	ret = -ENXIO;
-
-	irq = platform_get_irq(&at32_systc0_device, 0);
-	if (irq < 0) {
-		pr_debug("timer: could not get irq\n");
-		goto out_error;
-	}
-
-	pclk = clk_get(&at32_systc0_device.dev, "pclk");
-	if (IS_ERR(pclk)) {
-		pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
-		goto out_error;
-	}
-	clk_enable(pclk);
-
-	regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
-	if (!regs) {
-		pr_debug("timer: could not get resource\n");
-		goto out_error_clk;
-	}
-
-	ioregs = ioremap(regs->start, regs->end - regs->start + 1);
-	if (!ioregs) {
-		pr_debug("timer: could not get ioregs\n");
-		goto out_error_clk;
-	}
-
-	ret = avr32_timer_calc_div_and_set_jiffies(pclk);
-	if (ret)
-		goto out_error_io;
-
-	ret = setup_irq(irq, &timer_irqaction);
-	if (ret) {
-		pr_debug("timer: could not request irq %d: %d\n",
-				irq, ret);
-		goto out_error_io;
-	}
-
-	expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
-		* cycles_per_jiffy;
-
-	/* Enable clock and interrupts on RC compare */
-	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
-	timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
-	/* Set cycles to first interrupt */
-	timer_write(ioregs, 0,  RC, expirelo);
-
-	printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
-			ioregs, irq);
-
-	return 0;
-
-out_error_io:
-	iounmap(ioregs);
-out_error_clk:
-	clk_put(pclk);
-out_error:
-	return ret;
-}
-
-int avr32_hpt_start(void)
-{
-	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
-	return 0;
-}
-
-irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	unsigned int sr = timer_read(ioregs, 0, SR);
-
-	if (sr & TIMER_BIT(SR_CPCS)) {
-		/* ack timer interrupt and try to set next interrupt */
-		avr32_timer_ack();
-
-		/*
-		 * Call the generic timer interrupt handler
-		 */
-		write_seqlock(&xtime_lock);
-		do_timer(1);
-		write_sequnlock(&xtime_lock);
-
-		/*
-		 * In UP mode, we call local_timer_interrupt() to do profiling
-		 * and process accounting.
-		 *
-		 * SMP is not supported yet.
-		 */
-		local_timer_interrupt(irq, dev_id);
-
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
diff -urN linux-2.6.24.3/arch/avr32/Makefile avr32-2.6/arch/avr32/Makefile
--- linux-2.6.24.3/arch/avr32/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/Makefile	2008-04-23 19:33:28.000000000 +0200
@@ -16,7 +16,7 @@
 CFLAGS_MODULE	+= -mno-relax
 LDFLAGS_vmlinux	+= --relax
 
-cpuflags-$(CONFIG_CPU_AT32AP7000)	+= -mcpu=ap7000
+cpuflags-$(CONFIG_PLATFORM_AT32AP)	+= -march=ap
 
 KBUILD_CFLAGS	+= $(cpuflags-y)
 KBUILD_AFLAGS	+= $(cpuflags-y)
@@ -31,6 +31,8 @@
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
 core-y					+= arch/avr32/kernel/
 core-y					+= arch/avr32/mm/
+drivers-$(CONFIG_OPROFILE)		+= arch/avr32/oprofile/
+drivers-y				+= arch/avr32/drivers/
 libs-y					+= arch/avr32/lib/
 
 archincdir-$(CONFIG_PLATFORM_AT32AP)	:= arch-at32ap
diff -urN linux-2.6.24.3/arch/avr32/mm/dma-coherent.c avr32-2.6/arch/avr32/mm/dma-coherent.c
--- linux-2.6.24.3/arch/avr32/mm/dma-coherent.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/mm/dma-coherent.c	2008-04-23 19:33:29.000000000 +0200
@@ -41,6 +41,13 @@
 	struct page *page, *free, *end;
 	int order;
 
+	/* Following is a work-around (a.k.a. hack) to prevent pages
+	 * with __GFP_COMP being passed to split_page() which cannot
+	 * handle them.  The real problem is that this flag probably
+	 * should be 0 on AVR32 as it is not supported on this
+	 * platform--see CONFIG_HUGETLB_PAGE. */
+	gfp &= ~(__GFP_COMP);
+
 	size = PAGE_ALIGN(size);
 	order = get_order(size);
 
diff -urN linux-2.6.24.3/arch/avr32/mm/fault.c avr32-2.6/arch/avr32/mm/fault.c
--- linux-2.6.24.3/arch/avr32/mm/fault.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/mm/fault.c	2008-04-23 20:12:35.000000000 +0200
@@ -189,6 +189,8 @@
 
 	page = sysreg_read(PTBR);
 	printk(KERN_ALERT "ptbr = %08lx", page);
+	if (address >= TASK_SIZE)
+		page = (unsigned long)swapper_pg_dir;
 	if (page) {
 		page = ((unsigned long *)page)[address >> 22];
 		printk(" pgd = %08lx", page);
diff -urN linux-2.6.24.3/arch/avr32/mm/tlb.c avr32-2.6/arch/avr32/mm/tlb.c
--- linux-2.6.24.3/arch/avr32/mm/tlb.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/arch/avr32/mm/tlb.c	2008-04-23 19:33:29.000000000 +0200
@@ -348,7 +348,7 @@
 	return 0;
 }
 
-static struct seq_operations tlb_ops = {
+static const struct seq_operations tlb_ops = {
 	.start		= tlb_start,
 	.next		= tlb_next,
 	.stop		= tlb_stop,
diff -urN linux-2.6.24.3/arch/avr32/oprofile/Makefile avr32-2.6/arch/avr32/oprofile/Makefile
--- linux-2.6.24.3/arch/avr32/oprofile/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/oprofile/Makefile	2008-04-23 19:33:29.000000000 +0200
@@ -0,0 +1,8 @@
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+oprofile-y		:= $(addprefix ../../../drivers/oprofile/,	\
+				oprof.o cpu_buffer.o buffer_sync.o	\
+				event_buffer.o oprofile_files.o		\
+				oprofilefs.o oprofile_stats.o		\
+				timer_int.o)
+oprofile-y		+= op_model_avr32.o
diff -urN linux-2.6.24.3/arch/avr32/oprofile/op_model_avr32.c avr32-2.6/arch/avr32/oprofile/op_model_avr32.c
--- linux-2.6.24.3/arch/avr32/oprofile/op_model_avr32.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/arch/avr32/oprofile/op_model_avr32.c	2008-04-23 20:12:35.000000000 +0200
@@ -0,0 +1,234 @@
+/*
+ * AVR32 Performance Counter Driver
+ *
+ * Copyright (C) 2005-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Author: Ronny Pedersen
+ */
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/oprofile.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+
+#include <asm/sysreg.h>
+#include <asm/system.h>
+
+#define AVR32_PERFCTR_IRQ_GROUP	0
+#define AVR32_PERFCTR_IRQ_LINE	1
+
+enum { PCCNT, PCNT0, PCNT1, NR_counter };
+
+struct avr32_perf_counter {
+	unsigned long	enabled;
+	unsigned long	event;
+	unsigned long	count;
+	unsigned long	unit_mask;
+	unsigned long	kernel;
+	unsigned long	user;
+
+	u32		ie_mask;
+	u32		flag_mask;
+};
+
+static struct avr32_perf_counter counter[NR_counter] = {
+	{
+		.ie_mask	= SYSREG_BIT(IEC),
+		.flag_mask	= SYSREG_BIT(FC),
+	}, {
+		.ie_mask	= SYSREG_BIT(IE0),
+		.flag_mask	= SYSREG_BIT(F0),
+	}, {
+		.ie_mask	= SYSREG_BIT(IE1),
+		.flag_mask	= SYSREG_BIT(F1),
+	},
+};
+
+static void avr32_perf_counter_reset(void)
+{
+	/* Reset all counter and disable/clear all interrupts */
+	sysreg_write(PCCR, (SYSREG_BIT(PCCR_R)
+				| SYSREG_BIT(PCCR_C)
+				| SYSREG_BIT(FC)
+				| SYSREG_BIT(F0)
+				| SYSREG_BIT(F1)));
+}
+
+static irqreturn_t avr32_perf_counter_interrupt(int irq, void *dev_id)
+{
+	struct avr32_perf_counter *ctr = dev_id;
+	struct pt_regs *regs;
+	u32 pccr;
+
+	if (likely(!(intc_get_pending(AVR32_PERFCTR_IRQ_GROUP)
+					& (1 << AVR32_PERFCTR_IRQ_LINE))))
+		return IRQ_NONE;
+
+	regs = get_irq_regs();
+	pccr = sysreg_read(PCCR);
+
+	/* Clear the interrupt flags we're about to handle */
+	sysreg_write(PCCR, pccr);
+
+	/* PCCNT */
+	if (ctr->enabled && (pccr & ctr->flag_mask)) {
+		sysreg_write(PCCNT, -ctr->count);
+		oprofile_add_sample(regs, PCCNT);
+	}
+	ctr++;
+	/* PCNT0 */
+	if (ctr->enabled && (pccr & ctr->flag_mask)) {
+		sysreg_write(PCNT0, -ctr->count);
+		oprofile_add_sample(regs, PCNT0);
+	}
+	ctr++;
+	/* PCNT1 */
+	if (ctr->enabled && (pccr & ctr->flag_mask)) {
+		sysreg_write(PCNT1, -ctr->count);
+		oprofile_add_sample(regs, PCNT1);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int avr32_perf_counter_create_files(struct super_block *sb,
+		struct dentry *root)
+{
+	struct dentry *dir;
+	unsigned int i;
+	char filename[4];
+
+	for (i = 0; i < NR_counter; i++) {
+		snprintf(filename, sizeof(filename), "%u", i);
+		dir = oprofilefs_mkdir(sb, root, filename);
+
+		oprofilefs_create_ulong(sb, dir, "enabled",
+				&counter[i].enabled);
+		oprofilefs_create_ulong(sb, dir, "event",
+				&counter[i].event);
+		oprofilefs_create_ulong(sb, dir, "count",
+				&counter[i].count);
+
+		/* Dummy entries */
+		oprofilefs_create_ulong(sb, dir, "kernel",
+				&counter[i].kernel);
+		oprofilefs_create_ulong(sb, dir, "user",
+				&counter[i].user);
+		oprofilefs_create_ulong(sb, dir, "unit_mask",
+				&counter[i].unit_mask);
+	}
+
+	return 0;
+}
+
+static int avr32_perf_counter_setup(void)
+{
+	struct avr32_perf_counter *ctr;
+	u32 pccr;
+	int ret;
+	int i;
+
+	pr_debug("avr32_perf_counter_setup\n");
+
+	if (sysreg_read(PCCR) & SYSREG_BIT(PCCR_E)) {
+		printk(KERN_ERR
+			"oprofile: setup: perf counter already enabled\n");
+		return -EBUSY;
+	}
+
+	ret = request_irq(AVR32_PERFCTR_IRQ_GROUP,
+			avr32_perf_counter_interrupt, IRQF_SHARED,
+			"oprofile", counter);
+	if (ret)
+		return ret;
+
+	avr32_perf_counter_reset();
+
+	pccr = 0;
+	for (i = PCCNT; i < NR_counter; i++) {
+		ctr = &counter[i];
+		if (!ctr->enabled)
+			continue;
+
+		pr_debug("enabling counter %d...\n", i);
+
+		pccr |= ctr->ie_mask;
+
+		switch (i) {
+		case PCCNT:
+			/* PCCNT always counts cycles, so no events */
+			sysreg_write(PCCNT, -ctr->count);
+			break;
+		case PCNT0:
+			pccr |= SYSREG_BF(CONF0, ctr->event);
+			sysreg_write(PCNT0, -ctr->count);
+			break;
+		case PCNT1:
+			pccr |= SYSREG_BF(CONF1, ctr->event);
+			sysreg_write(PCNT1, -ctr->count);
+			break;
+		}
+	}
+
+	pr_debug("oprofile: writing 0x%x to PCCR...\n", pccr);
+
+	sysreg_write(PCCR, pccr);
+
+	return 0;
+}
+
+static void avr32_perf_counter_shutdown(void)
+{
+	pr_debug("avr32_perf_counter_shutdown\n");
+
+	avr32_perf_counter_reset();
+	free_irq(AVR32_PERFCTR_IRQ_GROUP, counter);
+}
+
+static int avr32_perf_counter_start(void)
+{
+	pr_debug("avr32_perf_counter_start\n");
+
+	sysreg_write(PCCR, sysreg_read(PCCR) | SYSREG_BIT(PCCR_E));
+
+	return 0;
+}
+
+static void avr32_perf_counter_stop(void)
+{
+	pr_debug("avr32_perf_counter_stop\n");
+
+	sysreg_write(PCCR, sysreg_read(PCCR) & ~SYSREG_BIT(PCCR_E));
+}
+
+static struct oprofile_operations avr32_perf_counter_ops __initdata = {
+	.create_files	= avr32_perf_counter_create_files,
+	.setup		= avr32_perf_counter_setup,
+	.shutdown	= avr32_perf_counter_shutdown,
+	.start		= avr32_perf_counter_start,
+	.stop		= avr32_perf_counter_stop,
+	.cpu_type	= "avr32",
+};
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	if (!(current_cpu_data.features & AVR32_FEATURE_PCTR))
+		return -ENODEV;
+
+	memcpy(ops, &avr32_perf_counter_ops,
+			sizeof(struct oprofile_operations));
+
+	printk(KERN_INFO "oprofile: using AVR32 performance monitoring.\n");
+
+	return 0;
+}
+
+void oprofile_arch_exit(void)
+{
+
+}
diff -urN linux-2.6.24.3/Documentation/kernel-parameters.txt avr32-2.6/Documentation/kernel-parameters.txt
--- linux-2.6.24.3/Documentation/kernel-parameters.txt	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/Documentation/kernel-parameters.txt	2008-04-23 20:12:35.000000000 +0200
@@ -34,6 +34,7 @@
 	ALSA	ALSA sound support is enabled.
 	APIC	APIC support is enabled.
 	APM	Advanced Power Management support is enabled.
+	AVR32	AVR32 architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	BLACKFIN Blackfin architecture is enabled.
 	DRM	Direct Rendering Management support is enabled.
@@ -1123,6 +1124,10 @@
 			of returning the full 64-bit number.
 			The default is to return 64-bit inode numbers.
 
+	nmi_debug=	[KNL,AVR32] Specify one or more actions to take
+			when a NMI is triggered.
+			Format: [state][,regs][,debounce][,die]
+
 	nmi_watchdog=	[KNL,BUGS=X86-32] Debugging features for SMP kernels
 
 	no387		[BUGS=X86-32] Tells the kernel to use the 387 maths
diff -urN linux-2.6.24.3/drivers/clocksource/Makefile avr32-2.6/drivers/clocksource/Makefile
--- linux-2.6.24.3/drivers/clocksource/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/clocksource/Makefile	2008-04-23 20:12:39.000000000 +0200
@@ -1,3 +1,4 @@
+obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
 obj-$(CONFIG_X86_CYCLONE_TIMER)	+= cyclone.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
 obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o
diff -urN linux-2.6.24.3/drivers/clocksource/tcb_clksrc.c avr32-2.6/drivers/clocksource/tcb_clksrc.c
--- linux-2.6.24.3/drivers/clocksource/tcb_clksrc.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/clocksource/tcb_clksrc.c	2008-04-23 20:12:39.000000000 +0200
@@ -0,0 +1,305 @@
+#include <linux/init.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/atmel_tc.h>
+
+
+/*
+ * We're configured to use a specific TC block, one that's not hooked
+ * up to external hardware, to provide a time solution:
+ *
+ *   - Two channels combine to create a free-running 32 bit counter
+ *     with a base rate of 5+ MHz, packaged as a clocksource (with
+ *     resolution better than 200 nsec).
+ *
+ *   - The third channel may be used to provide a 16-bit clockevent
+ *     source, used in either periodic or oneshot mode.  This runs
+ *     at 32 KiHZ, and can handle delays of up to two seconds.
+ *
+ * A boot clocksource and clockevent source are also currently needed,
+ * unless the relevant platforms (ARM/AT91, AVR32/AT32) are changed so
+ * this code can be used when init_timers() is called, well before most
+ * devices are set up.  (Some low end AT91 parts, which can run uClinux,
+ * have only the timers in one TC block... they currently don't support
+ * the tclib code, because of that initialization issue.)
+ *
+ * REVISIT behavior during system suspend states... we should disable
+ * all clocks and save the power.  Easily done for clockevent devices,
+ * but clocksources won't necessarily get the needed notifications.
+ * For deeper system sleep states, this will be mandatory...
+ */
+
+static void __iomem *tcaddr;
+
+static cycle_t tc_get_cycles(void)
+{
+	unsigned long	flags;
+	u32		lower, upper;
+
+	raw_local_irq_save(flags);
+	do {
+		upper = __raw_readl(tcaddr + ATMEL_TC_REG(1, CV));
+		lower = __raw_readl(tcaddr + ATMEL_TC_REG(0, CV));
+	} while (upper != __raw_readl(tcaddr + ATMEL_TC_REG(1, CV)));
+
+	raw_local_irq_restore(flags);
+	return (upper << 16) | lower;
+}
+
+static struct clocksource clksrc = {
+	.name           = "tcb_clksrc",
+	.rating         = 200,
+	.read           = tc_get_cycles,
+	.mask           = CLOCKSOURCE_MASK(32),
+	.shift          = 18,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+
+struct tc_clkevt_device {
+	struct clock_event_device	clkevt;
+	struct clk			*clk;
+	void __iomem			*regs;
+};
+
+static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt)
+{
+	return container_of(clkevt, struct tc_clkevt_device, clkevt);
+}
+
+/* For now, we always use the 32K clock ... this optimizes for NO_HZ,
+ * because using one of the divided clocks would usually mean the
+ * tick rate can never be less than several dozen Hz (vs 0.5 Hz).
+ *
+ * A divided clock could be good for high resolution timers, since
+ * 30.5 usec resolution can seem "low".
+ */
+static u32 timer_clock;
+
+static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
+{
+	struct tc_clkevt_device *tcd = to_tc_clkevt(d);
+	void __iomem		*regs = tcd->regs;
+
+	if (tcd->clkevt.mode == CLOCK_EVT_MODE_PERIODIC
+			|| tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) {
+		__raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
+		__raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
+		clk_disable(tcd->clk);
+	}
+
+	switch (m) {
+
+	/* By not making the gentime core emulate periodic mode on top
+	 * of oneshot, we get lower overhead and improved accuracy.
+	 */
+	case CLOCK_EVT_MODE_PERIODIC:
+		clk_enable(tcd->clk);
+
+		/* slow clock, count up to RC, then irq and restart */
+		__raw_writel(timer_clock
+				| ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
+				regs + ATMEL_TC_REG(2, CMR));
+		__raw_writel((32768 + HZ/2) / HZ, tcaddr + ATMEL_TC_REG(2, RC));
+
+		/* Enable clock and interrupts on RC compare */
+		__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+
+		/* go go gadget! */
+		__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
+				regs + ATMEL_TC_REG(2, CCR));
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		clk_enable(tcd->clk);
+
+		/* slow clock, count up to RC, then irq and stop */
+		__raw_writel(timer_clock | ATMEL_TC_CPCSTOP
+				| ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO,
+				regs + ATMEL_TC_REG(2, CMR));
+		__raw_writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER));
+
+		/* set_next_event() configures and starts the timer */
+		break;
+
+	default:
+		break;
+	}
+}
+
+static int tc_next_event(unsigned long delta, struct clock_event_device *d)
+{
+	__raw_writel(delta, tcaddr + ATMEL_TC_REG(2, RC));
+
+	/* go go gadget! */
+	__raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
+			tcaddr + ATMEL_TC_REG(2, CCR));
+	return 0;
+}
+
+static struct tc_clkevt_device clkevt = {
+	.clkevt	= {
+		.name		= "tc_clkevt",
+		.features	= CLOCK_EVT_FEAT_PERIODIC
+					| CLOCK_EVT_FEAT_ONESHOT,
+		.shift		= 32,
+		/* Should be lower than at91rm9200's system timer */
+		.rating		= 125,
+		.cpumask	= CPU_MASK_CPU0,
+		.set_next_event	= tc_next_event,
+		.set_mode	= tc_mode,
+	},
+};
+
+static irqreturn_t ch2_irq(int irq, void *handle)
+{
+	struct tc_clkevt_device	*dev = handle;
+	unsigned int		sr;
+
+	sr = __raw_readl(dev->regs + ATMEL_TC_REG(2, SR));
+	if (sr & ATMEL_TC_CPCS) {
+		dev->clkevt.event_handler(&dev->clkevt);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static struct irqaction tc_irqaction = {
+	.name		= "tc_clkevt",
+	.flags		= IRQF_TIMER | IRQF_DISABLED,
+	.handler	= ch2_irq,
+};
+
+static void __init setup_clkevents(struct atmel_tc *tc,
+		struct clk *t0_clk, int clk32k_divisor_idx)
+{
+	struct platform_device *pdev = tc->pdev;
+	struct clk *t2_clk = tc->clk[2];
+	int irq = tc->irq[2];
+
+	clkevt.regs = tc->regs;
+	clkevt.clk = t2_clk;
+	tc_irqaction.dev_id = &clkevt;
+
+	timer_clock = clk32k_divisor_idx;
+
+	clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
+	clkevt.clkevt.max_delta_ns
+		= clockevent_delta2ns(0xffff, &clkevt.clkevt);
+	clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
+
+	setup_irq(irq, &tc_irqaction);
+
+	clockevents_register_device(&clkevt.clkevt);
+}
+
+#else /* !CONFIG_GENERIC_CLOCKEVENTS */
+
+static void __init setup_clkevents(struct atmel_tc *tc,
+		struct clk *t0_clk, int clk32k_divisor_idx)
+{
+	/* NOTHING */
+}
+
+#endif
+
+static int __init tcb_clksrc_init(void)
+{
+	static char bootinfo[] __initdata
+		= KERN_DEBUG "%s: tc%d at %d.%03d MHz\n";
+
+	struct platform_device *pdev;
+	struct atmel_tc *tc;
+	struct clk *t0_clk, *t1_clk;
+	u32 rate, divided_rate = 0;
+	int best_divisor_idx = -1;
+	int clk32k_divisor_idx = -1;
+	int i;
+
+	tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK, clksrc.name);
+	if (!tc) {
+		pr_debug("can't alloc TC for clocksource\n");
+		return -ENODEV;
+	}
+	tcaddr = tc->regs;
+	pdev = tc->pdev;
+
+	t0_clk = tc->clk[0];
+	clk_enable(t0_clk);
+
+	/* How fast will we be counting?  Pick something over 5 MHz.  */
+	rate = (u32) clk_get_rate(t0_clk);
+	for (i = 0; i < 5; i++) {
+		unsigned divisor = atmel_tc_divisors[i];
+		unsigned tmp;
+
+		/* remember 32 KiHz clock for later */
+		if (!divisor) {
+			clk32k_divisor_idx = i;
+			continue;
+		}
+
+		tmp = rate / divisor;
+		pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp);
+		if (best_divisor_idx > 0) {
+			if (tmp < 5 * 1000 * 1000)
+				continue;
+		}
+		divided_rate = tmp;
+		best_divisor_idx = i;
+	}
+
+	clksrc.mult = clocksource_hz2mult(divided_rate, clksrc.shift);
+
+	printk(bootinfo, clksrc.name, CONFIG_ATMEL_TCB_CLKSRC_BLOCK,
+			divided_rate / 1000000,
+			((divided_rate + 500000) % 1000000) / 1000);
+
+	/* tclib will give us three clocks no matter what the
+	 * underlying platform supports.
+	 */
+	clk_enable(tc->clk[1]);
+
+	/* channel 0:  waveform mode, input mclk/8, clock TIOA0 on overflow */
+	__raw_writel(best_divisor_idx			/* likely divide-by-8 */
+			| ATMEL_TC_WAVE
+			| ATMEL_TC_WAVESEL_UP		/* free-run */
+			| ATMEL_TC_ACPA_SET		/* TIOA0 rises at 0 */
+			| ATMEL_TC_ACPC_CLEAR,		/* (duty cycle 50%) */
+			tcaddr + ATMEL_TC_REG(0, CMR));
+	__raw_writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA));
+	__raw_writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC));
+	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR));	/* no irqs */
+	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
+
+	/* channel 1:  waveform mode, input TIOA0 */
+	__raw_writel(ATMEL_TC_XC1			/* input: TIOA0 */
+			| ATMEL_TC_WAVE
+			| ATMEL_TC_WAVESEL_UP,		/* free-run */
+			tcaddr + ATMEL_TC_REG(1, CMR));
+	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR));	/* no irqs */
+	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR));
+
+	/* chain channel 0 to channel 1, then reset all the timers */
+	__raw_writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR);
+	__raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
+
+	/* and away we go! */
+	clocksource_register(&clksrc);
+
+	/* channel 2:  periodic and oneshot timer support */
+	setup_clkevents(tc, t0_clk, clk32k_divisor_idx);
+
+	return 0;
+}
+arch_initcall(tcb_clksrc_init);
diff -urN linux-2.6.24.3/drivers/i2c/busses/i2c-atmeltwi.c avr32-2.6/drivers/i2c/busses/i2c-atmeltwi.c
--- linux-2.6.24.3/drivers/i2c/busses/i2c-atmeltwi.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/i2c/busses/i2c-atmeltwi.c	2008-04-23 19:33:37.000000000 +0200
@@ -0,0 +1,436 @@
+/*
+ * i2c Support for Atmel's Two-Wire Interface (TWI)
+ *
+ * Based on the work of Copyright (C) 2004 Rick Bronson
+ * Converted to 2.6 by Andrew Victor <andrew at sanpeople.com>
+ * Ported to AVR32 and heavily modified by Espen Krangnes
+ * <ekrangnes at atmel.com>
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Borrowed heavily from the original work by:
+ * Copyright (C) 2000 Philip Edelbrock <phil at stimpy.netroedge.com>
+ *
+ * Partialy rewriten by Karel Hojdar <cmkaho at seznam.cz>
+ * bugs removed, interrupt routine markedly rewritten
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#undef VERBOSE_DEBUG
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/io.h>
+
+#include "i2c-atmeltwi.h"
+
+static unsigned int baudrate = 100 * 1000;
+module_param(baudrate, uint, S_IRUGO);
+MODULE_PARM_DESC(baudrate, "The TWI baudrate");
+
+
+struct atmel_twi {
+	void __iomem *regs;
+	struct i2c_adapter adapter;
+	struct clk *pclk;
+	struct completion comp;
+	u32 mask;
+	u8 *buf;
+	u16 len;
+	u16 acks_left;
+	int status;
+	unsigned int irq;
+
+};
+#define to_atmel_twi(adap) container_of(adap, struct atmel_twi, adapter)
+
+/*
+ * (Re)Initialize the TWI hardware registers.
+ */
+static int twi_hwinit(struct atmel_twi *twi)
+{
+	unsigned long cdiv, ckdiv = 0;
+
+	/* REVISIT: wait till SCL is high before resetting; otherwise,
+	 * some versions will wedge forever.
+	 */
+
+	twi_writel(twi, IDR, ~0UL);
+	twi_writel(twi, CR, TWI_BIT(SWRST));	/*Reset peripheral*/
+	twi_readl(twi, SR);
+
+	cdiv = (clk_get_rate(twi->pclk) / (2 * baudrate)) - 4;
+
+	while (cdiv > 255) {
+		ckdiv++;
+		cdiv = cdiv >> 1;
+	}
+
+	/* REVISIT: there are various errata to consider re CDIV and CHDIV
+	 * here, at least on at91 parts.
+	 */
+
+	if (ckdiv > 7)
+		return -EINVAL;
+	else
+		twi_writel(twi, CWGR, TWI_BF(CKDIV, ckdiv)
+				| TWI_BF(CHDIV, cdiv)
+				| TWI_BF(CLDIV, cdiv));
+	return 0;
+}
+
+/*
+ * Waits for the i2c status register to set the specified bitmask
+ * Returns 0 if timed out ... ~100ms is much longer than the SMBus
+ * limit, but I2C has no limit at all.
+ */
+static int twi_complete(struct atmel_twi *twi, u32 mask)
+{
+	int timeout = msecs_to_jiffies(100);
+
+	mask |= TWI_BIT(TXCOMP);
+	twi->mask = mask | TWI_BIT(NACK) | TWI_BIT(OVRE);
+	init_completion(&twi->comp);
+
+	twi_writel(twi, IER, mask);
+
+	if (!wait_for_completion_timeout(&twi->comp, timeout)) {
+		/* RESET TWI interface */
+		twi_writel(twi, CR, TWI_BIT(SWRST));
+
+		/* Reinitialize TWI */
+		twi_hwinit(twi);
+
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+/*
+ * Generic i2c master transfer entrypoint.
+ */
+static int twi_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num)
+{
+	struct atmel_twi *twi = to_atmel_twi(adap);
+	int i;
+
+	dev_dbg(&adap->dev, "twi_xfer: processing %d messages:\n", num);
+
+	twi->status = 0;
+	for (i = 0; i < num; i++, pmsg++) {
+		twi->len = pmsg->len;
+		twi->buf = pmsg->buf;
+		twi->acks_left = pmsg->len;
+		twi_writel(twi, MMR, TWI_BF(DADR, pmsg->addr) |
+			(pmsg->flags & I2C_M_RD ? TWI_BIT(MREAD) : 0));
+		twi_writel(twi, IADR, TWI_BF(IADR, pmsg->addr));
+
+		dev_dbg(&adap->dev,
+			"#%d: %s %d byte%s %s dev 0x%02x\n",
+			i,
+			pmsg->flags & I2C_M_RD ? "reading" : "writing",
+			pmsg->len,
+			pmsg->len > 1 ? "s" : "",
+			pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr);
+
+		/* enable */
+		twi_writel(twi, CR, TWI_BIT(MSEN));
+
+		if (pmsg->flags & I2C_M_RD) {
+			/* cleanup after previous RX overruns */
+			while (twi_readl(twi, SR) & TWI_BIT(RXRDY))
+				twi_readl(twi, RHR);
+
+			if (twi->len == 1)
+				twi_writel(twi, CR,
+					TWI_BIT(START) | TWI_BIT(STOP));
+			else
+				twi_writel(twi, CR, TWI_BIT(START));
+
+			if (twi_complete(twi, TWI_BIT(RXRDY)) == -ETIMEDOUT) {
+				dev_dbg(&adap->dev, "RX[%d] timeout. "
+					"Stopped with %d bytes left\n",
+					i, twi->acks_left);
+				return -ETIMEDOUT;
+			}
+		} else {
+			twi_writel(twi, THR, twi->buf[0]);
+			twi->acks_left--;
+			/* REVISIT: some chips don't start automagically:
+			 * twi_writel(twi, CR, TWI_BIT(START));
+			 */
+			if (twi_complete(twi, TWI_BIT(TXRDY)) == -ETIMEDOUT) {
+				dev_dbg(&adap->dev, "TX[%d] timeout. "
+					"Stopped with %d bytes left\n",
+					i, twi->acks_left);
+				return -ETIMEDOUT;
+			}
+			/* REVISIT: an erratum workaround may be needed here;
+			 * see sam9261 "STOP not generated" (START either).
+			 */
+		}
+
+		/* Disable TWI interface */
+		twi_writel(twi, CR, TWI_BIT(MSDIS));
+
+		if (twi->status)
+			return twi->status;
+
+		/* WARNING:  This driver lies about properly supporting
+		 * repeated start, or it would *ALWAYS* return here.  It
+		 * has issued a STOP.  Continuing is a false claim -- that
+		 * a second (or third, etc.) message is part of the same
+		 * "combined" (no STOPs between parts) message.
+		 */
+
+	} /* end cur msg */
+
+	return i;
+}
+
+
+static irqreturn_t twi_interrupt(int irq, void *dev_id)
+{
+	struct atmel_twi *twi = dev_id;
+	int status = twi_readl(twi, SR);
+
+	/* Save state for later debug prints */
+	int old_status = status;
+
+	if (twi->mask & status) {
+
+		status &= twi->mask;
+
+		if (status & TWI_BIT(RXRDY)) {
+			if ((status & TWI_BIT(OVRE)) && twi->acks_left) {
+				/* Note weakness in fault reporting model:
+				 * we can't say "the first N of these data
+				 * bytes are valid".
+				 */
+				dev_err(&twi->adapter.dev,
+					"OVERRUN RX! %04x, lost %d\n",
+					old_status, twi->acks_left);
+				twi->acks_left = 0;
+				twi_writel(twi, CR, TWI_BIT(STOP));
+				twi->status = -EOVERFLOW;
+			} else if (twi->acks_left > 0) {
+				twi->buf[twi->len - twi->acks_left] =
+					twi_readl(twi, RHR);
+				twi->acks_left--;
+			}
+			if (status & TWI_BIT(TXCOMP))
+				goto done;
+			if (twi->acks_left == 1)
+				twi_writel(twi, CR, TWI_BIT(STOP));
+
+		} else if (status & (TWI_BIT(NACK) | TWI_BIT(TXCOMP))) {
+			goto done;
+
+		} else if (status & TWI_BIT(TXRDY)) {
+			if (twi->acks_left > 0) {
+				twi_writel(twi, THR,
+					twi->buf[twi->len - twi->acks_left]);
+				twi->acks_left--;
+			} else
+				twi_writel(twi, CR, TWI_BIT(STOP));
+		}
+
+		if (twi->acks_left == 0)
+			twi_writel(twi, IDR, ~TWI_BIT(TXCOMP));
+	}
+
+	/* enabling this message helps trigger overruns/underruns ... */
+	dev_vdbg(&twi->adapter.dev,
+		"ISR: SR 0x%04X, mask 0x%04X, acks %i\n",
+		old_status,
+		twi->acks_left ? twi->mask : TWI_BIT(TXCOMP),
+		twi->acks_left);
+
+	return IRQ_HANDLED;
+
+done:
+	/* Note weak fault reporting model:  we can't report how many
+	 * bytes we sent before the NAK, or let upper layers choose
+	 * whether to continue.  The I2C stack doesn't allow that...
+	 */
+	if (status & TWI_BIT(NACK)) {
+		dev_dbg(&twi->adapter.dev, "NACK received! %d to go\n",
+			twi->acks_left);
+		twi->status = -EPIPE;
+
+	/* TX underrun morphs automagically into a premature STOP;
+	 * we'll probably observe UVRE even when it's not documented.
+	 */
+	} else if (twi->acks_left && (twi->mask & TWI_BIT(TXRDY))) {
+		dev_err(&twi->adapter.dev, "UNDERRUN TX!  %04x, %d to go\n",
+			old_status, twi->acks_left);
+		twi->status = -ENOSR;
+	}
+
+	twi_writel(twi, IDR, ~0UL);
+	complete(&twi->comp);
+
+	dev_dbg(&twi->adapter.dev, "ISR: SR 0x%04X, acks %i --> %d\n",
+		old_status, twi->acks_left, twi->status);
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * Return list of supported functionality.
+ *
+ * NOTE:  see warning above about repeated starts; this driver is falsely
+ * claiming to support "combined" transfers.  The mid-message STOPs mean
+ * some slaves will never work with this driver.  (Use i2c-gpio...)
+ */
+static u32 twi_func(struct i2c_adapter *adapter)
+{
+	return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL)
+		& ~I2C_FUNC_SMBUS_QUICK;
+}
+
+static struct i2c_algorithm twi_algorithm = {
+	.master_xfer	= twi_xfer,
+	.functionality	= twi_func,
+};
+
+/*
+ * Main initialization routine.
+ */
+static int __init twi_probe(struct platform_device *pdev)
+{
+	struct atmel_twi *twi;
+	struct resource *regs;
+	struct clk *pclk;
+	struct i2c_adapter *adapter;
+	int rc, irq;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
+	pclk = clk_get(&pdev->dev, "twi_pclk");
+	if (IS_ERR(pclk))
+		return PTR_ERR(pclk);
+	clk_enable(pclk);
+
+	rc = -ENOMEM;
+	twi = kzalloc(sizeof(struct atmel_twi), GFP_KERNEL);
+	if (!twi) {
+		dev_dbg(&pdev->dev, "can't allocate interface!\n");
+		goto err_alloc_twi;
+	}
+
+	twi->pclk = pclk;
+	twi->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!twi->regs)
+		goto err_ioremap;
+
+	irq = platform_get_irq(pdev, 0);
+	rc = request_irq(irq, twi_interrupt, 0, "twi", twi);
+	if (rc) {
+		dev_dbg(&pdev->dev, "can't bind irq!\n");
+		goto err_irq;
+	}
+	twi->irq = irq;
+
+	rc = twi_hwinit(twi);
+	if (rc) {
+		dev_err(&pdev->dev, "Unable to set baudrate\n");
+		goto err_hw_init;
+	}
+
+	adapter = &twi->adapter;
+	sprintf(adapter->name, "TWI");
+	adapter->algo = &twi_algorithm;
+	adapter->class = I2C_CLASS_ALL;
+	adapter->nr = pdev->id;
+	adapter->dev.parent = &pdev->dev;
+
+	platform_set_drvdata(pdev, twi);
+
+	rc = i2c_add_numbered_adapter(adapter);
+	if (rc) {
+		dev_dbg(&pdev->dev, "Adapter %s registration failed\n",
+			adapter->name);
+		goto err_register;
+	}
+
+	dev_info(&pdev->dev,
+		"Atmel TWI/I2C adapter (baudrate %dk) at 0x%08lx.\n",
+		 baudrate/1000, (unsigned long)regs->start);
+
+	return 0;
+
+
+err_register:
+	platform_set_drvdata(pdev, NULL);
+
+err_hw_init:
+	free_irq(irq, twi);
+
+err_irq:
+	iounmap(twi->regs);
+
+err_ioremap:
+	kfree(twi);
+
+err_alloc_twi:
+	clk_disable(pclk);
+	clk_put(pclk);
+
+	return rc;
+}
+
+static int __exit twi_remove(struct platform_device *pdev)
+{
+	struct atmel_twi *twi = platform_get_drvdata(pdev);
+	int res;
+
+	platform_set_drvdata(pdev, NULL);
+	res = i2c_del_adapter(&twi->adapter);
+	twi_writel(twi, CR, TWI_BIT(MSDIS));
+	iounmap(twi->regs);
+	clk_disable(twi->pclk);
+	clk_put(twi->pclk);
+	free_irq(twi->irq, twi);
+	kfree(twi);
+
+	return res;
+}
+
+static struct platform_driver twi_driver = {
+	.remove		= __exit_p(twi_remove),
+	.driver		= {
+		.name	= "atmel_twi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init atmel_twi_init(void)
+{
+	return platform_driver_probe(&twi_driver, twi_probe);
+}
+
+static void __exit atmel_twi_exit(void)
+{
+	platform_driver_unregister(&twi_driver);
+}
+
+module_init(atmel_twi_init);
+module_exit(atmel_twi_exit);
+
+MODULE_AUTHOR("Espen Krangnes");
+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.24.3/drivers/i2c/busses/i2c-atmeltwi.h avr32-2.6/drivers/i2c/busses/i2c-atmeltwi.h
--- linux-2.6.24.3/drivers/i2c/busses/i2c-atmeltwi.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/i2c/busses/i2c-atmeltwi.h	2008-04-23 19:33:37.000000000 +0200
@@ -0,0 +1,117 @@
+/*
+ * Register definitions for the Atmel Two-Wire Interface
+ */
+
+#ifndef __ATMELTWI_H__
+#define __ATMELTWI_H__
+
+/* TWI register offsets */
+#define TWI_CR					0x0000
+#define TWI_MMR					0x0004
+#define TWI_SMR					0x0008
+#define TWI_IADR				0x000c
+#define TWI_CWGR				0x0010
+#define TWI_SR					0x0020
+#define TWI_IER					0x0024
+#define TWI_IDR					0x0028
+#define TWI_IMR					0x002c
+#define TWI_RHR					0x0030
+#define TWI_THR					0x0034
+
+/* Bitfields in CR */
+#define TWI_START_OFFSET			0
+#define TWI_START_SIZE				1
+#define TWI_STOP_OFFSET				1
+#define TWI_STOP_SIZE				1
+#define TWI_MSEN_OFFSET				2
+#define TWI_MSEN_SIZE				1
+#define TWI_MSDIS_OFFSET			3
+#define TWI_MSDIS_SIZE				1
+#define TWI_SVEN_OFFSET				4
+#define TWI_SVEN_SIZE				1
+#define TWI_SVDIS_OFFSET			5
+#define TWI_SVDIS_SIZE				1
+#define TWI_SWRST_OFFSET			7
+#define TWI_SWRST_SIZE				1
+
+/* Bitfields in MMR */
+#define TWI_IADRSZ_OFFSET			8
+#define TWI_IADRSZ_SIZE				2
+#define TWI_MREAD_OFFSET			12
+#define TWI_MREAD_SIZE				1
+#define TWI_DADR_OFFSET				16
+#define TWI_DADR_SIZE				7
+
+/* Bitfields in SMR */
+#define TWI_SADR_OFFSET				16
+#define TWI_SADR_SIZE				7
+
+/* Bitfields in IADR */
+#define TWI_IADR_OFFSET				0
+#define TWI_IADR_SIZE				24
+
+/* Bitfields in CWGR */
+#define TWI_CLDIV_OFFSET			0
+#define TWI_CLDIV_SIZE				8
+#define TWI_CHDIV_OFFSET			8
+#define TWI_CHDIV_SIZE				8
+#define TWI_CKDIV_OFFSET			16
+#define TWI_CKDIV_SIZE				3
+
+/* Bitfields in SR */
+#define TWI_TXCOMP_OFFSET			0
+#define TWI_TXCOMP_SIZE				1
+#define TWI_RXRDY_OFFSET			1
+#define TWI_RXRDY_SIZE				1
+#define TWI_TXRDY_OFFSET			2
+#define TWI_TXRDY_SIZE				1
+#define TWI_SVDIR_OFFSET			3
+#define TWI_SVDIR_SIZE				1
+#define TWI_SVACC_OFFSET			4
+#define TWI_SVACC_SIZE				1
+#define TWI_GCACC_OFFSET			5
+#define TWI_GCACC_SIZE				1
+#define TWI_OVRE_OFFSET				6
+#define TWI_OVRE_SIZE				1
+#define TWI_UNRE_OFFSET				7
+#define TWI_UNRE_SIZE				1
+#define TWI_NACK_OFFSET				8
+#define TWI_NACK_SIZE				1
+#define TWI_ARBLST_OFFSET			9
+#define TWI_ARBLST_SIZE				1
+
+/* Bitfields in RHR */
+#define TWI_RXDATA_OFFSET			0
+#define TWI_RXDATA_SIZE				8
+
+/* Bitfields in THR */
+#define TWI_TXDATA_OFFSET			0
+#define TWI_TXDATA_SIZE				8
+
+/* Constants for IADRSZ */
+#define TWI_IADRSZ_NO_ADDR			0
+#define TWI_IADRSZ_ONE_BYTE			1
+#define TWI_IADRSZ_TWO_BYTES			2
+#define TWI_IADRSZ_THREE_BYTES			3
+
+/* Bit manipulation macros */
+#define TWI_BIT(name)					\
+	(1 << TWI_##name##_OFFSET)
+#define TWI_BF(name, value)				\
+	(((value) & ((1 << TWI_##name##_SIZE) - 1))	\
+	 << TWI_##name##_OFFSET)
+#define TWI_BFEXT(name, value)				\
+	(((value) >> TWI_##name##_OFFSET)		\
+	 & ((1 << TWI_##name##_SIZE) - 1))
+#define TWI_BFINS(name, value, old)			\
+	(((old) & ~(((1 << TWI_##name##_SIZE) - 1)	\
+		    << TWI_##name##_OFFSET))		\
+	 | TWI_BF(name, (value)))
+
+/* Register access macros */
+#define twi_readl(port, reg)				\
+	__raw_readl((port)->regs + TWI_##reg)
+#define twi_writel(port, reg, value)			\
+	__raw_writel((value), (port)->regs + TWI_##reg)
+
+#endif /* __ATMELTWI_H__ */
diff -urN linux-2.6.24.3/drivers/i2c/busses/Kconfig avr32-2.6/drivers/i2c/busses/Kconfig
--- linux-2.6.24.3/drivers/i2c/busses/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/i2c/busses/Kconfig	2008-04-23 20:12:40.000000000 +0200
@@ -88,6 +88,14 @@
 	  to support combined I2C messages.  Use the i2c-gpio driver
 	  unless your system can cope with those limitations.
 
+config I2C_ATMELTWI
+	tristate "Atmel Two-Wire Interface (TWI)"
+	depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
+	help
+	  Atmel on-chip TWI controller. Say Y if you have an AT32 or
+	  AT91-based device and want to use its built-in TWI
+	  functionality.
+
 config I2C_AU1550
 	tristate "Au1550/Au1200 SMBus interface"
 	depends on SOC_AU1550 || SOC_AU1200
diff -urN linux-2.6.24.3/drivers/i2c/busses/Makefile avr32-2.6/drivers/i2c/busses/Makefile
--- linux-2.6.24.3/drivers/i2c/busses/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/i2c/busses/Makefile	2008-04-23 20:12:40.000000000 +0200
@@ -53,6 +53,7 @@
 obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
+obj-$(CONFIG_I2C_ATMELTWI)	+= i2c-atmeltwi.o
 
 ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
 EXTRA_CFLAGS += -DDEBUG
diff -urN linux-2.6.24.3/drivers/input/serio/at32psif.c avr32-2.6/drivers/input/serio/at32psif.c
--- linux-2.6.24.3/drivers/input/serio/at32psif.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/input/serio/at32psif.c	2008-04-23 20:12:40.000000000 +0200
@@ -0,0 +1,351 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Driver for the AT32AP700X PS/2 controller (PSIF).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include "at32psif.h"
+
+#define PSIF_BUF_SIZE		16
+
+#define ring_is_empty(_psif)	(_psif->head == _psif->tail)
+#define ring_next_head(_psif)	((_psif->head + 1) & (PSIF_BUF_SIZE - 1))
+#define ring_next_tail(_psif)	((_psif->tail + 1) & (PSIF_BUF_SIZE - 1))
+
+struct psif {
+	struct platform_device	*pdev;
+	struct clk		*pclk;
+	struct serio		*io;
+	struct timer_list	tx_timer;
+	void __iomem		*regs;
+	unsigned int		irq;
+	unsigned int		open;
+	/* Prevent concurrent writes to circular buffer. */
+	spinlock_t		lock;
+	unsigned int		head;
+	unsigned int		tail;
+	unsigned char		buffer[PSIF_BUF_SIZE];
+};
+
+static irqreturn_t psif_interrupt(int irq, void *_ptr)
+{
+	struct psif *psif = _ptr;
+	int retval = IRQ_NONE;
+	unsigned int io_flags = 0;
+	unsigned long status;
+
+	status = psif_readl(psif, SR);
+
+	if (status & PSIF_BIT(RXRDY)) {
+		unsigned char val = (unsigned char) psif_readl(psif, RHR);
+
+		if (status & PSIF_BIT(PARITY))
+			io_flags |= SERIO_PARITY;
+		if (status & PSIF_BIT(OVRUN))
+			dev_err(&psif->pdev->dev, "overrun read error\n");
+
+		serio_interrupt(psif->io, val, io_flags);
+
+		retval = IRQ_HANDLED;
+	}
+
+	spin_lock(&psif->lock);
+
+	if (status & PSIF_BIT(TXEMPTY)) {
+		if (status & PSIF_BIT(NACK))
+			dev_err(&psif->pdev->dev, "NACK error\n");
+
+		psif_writel(psif, IDR, PSIF_BIT(TXEMPTY));
+
+		if (!ring_is_empty(psif))
+			mod_timer(&psif->tx_timer,
+					jiffies + msecs_to_jiffies(1));
+
+		retval = IRQ_HANDLED;
+	}
+
+	spin_unlock(&psif->lock);
+
+	return retval;
+}
+
+static void psif_transmit_data(unsigned long data)
+{
+	struct psif *psif = (struct psif *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&psif->lock, flags);
+
+	psif_writel(psif, THR, psif->buffer[psif->tail]);
+	psif->tail = ring_next_tail(psif);
+
+	if (!ring_is_empty(psif))
+		psif_writel(psif, IER, PSIF_BIT(TXEMPTY));
+
+	spin_unlock_irqrestore(&psif->lock, flags);
+}
+
+static int psif_write(struct serio *io, unsigned char val)
+{
+	struct psif *psif = io->port_data;
+	unsigned long flags;
+	unsigned int head;
+
+	spin_lock_irqsave(&psif->lock, flags);
+
+	head = ring_next_head(psif);
+
+	if (head != psif->tail) {
+		psif->buffer[psif->head] = val;
+		psif->head = head;
+	} else {
+		dev_err(&psif->pdev->dev, "underrun write error\n");
+	}
+
+	spin_unlock_irqrestore(&psif->lock, flags);
+
+	/* Make sure TXEMPTY interrupt is enabled. */
+	psif_writel(psif, IER, PSIF_BIT(TXEMPTY));
+
+	return 0;
+}
+
+static int psif_open(struct serio *io)
+{
+	struct psif *psif = io->port_data;
+	int retval;
+
+	retval = clk_enable(psif->pclk);
+	if (retval)
+		goto out;
+
+	psif_writel(psif, CR, PSIF_BIT(CR_TXEN) | PSIF_BIT(CR_RXEN));
+	psif_writel(psif, IER, PSIF_BIT(RXRDY));
+
+	psif->open = 1;
+out:
+	return retval;
+}
+
+static void psif_close(struct serio *io)
+{
+	struct psif *psif = io->port_data;
+
+	psif->open = 0;
+
+	psif_writel(psif, IDR, ~0UL);
+	psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
+
+	clk_disable(psif->pclk);
+}
+
+static void psif_set_prescaler(struct psif *psif)
+{
+	unsigned long prscv;
+	unsigned long rate = clk_get_rate(psif->pclk);
+
+	/* PRSCV = Pulse length (100 us) * PSIF module frequency. */
+	prscv = 100 * (rate / 1000000UL);
+
+	if (prscv > ((1<<PSIF_PSR_PRSCV_SIZE) - 1)) {
+		prscv = (1<<PSIF_PSR_PRSCV_SIZE) - 1;
+		dev_dbg(&psif->pdev->dev, "pclk too fast, "
+				"prescaler set to max\n");
+	}
+
+	clk_enable(psif->pclk);
+	psif_writel(psif, PSR, prscv);
+	clk_disable(psif->pclk);
+}
+
+static int __init psif_probe(struct platform_device *pdev)
+{
+	struct resource *regs;
+	struct psif *psif;
+	struct serio *io;
+	struct clk *pclk;
+	int irq;
+	int ret;
+
+	psif = kzalloc(sizeof(struct psif), GFP_KERNEL);
+	if (!psif) {
+		dev_dbg(&pdev->dev, "out of memory\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+	psif->pdev = pdev;
+
+	io = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!io) {
+		dev_dbg(&pdev->dev, "out of memory\n");
+		ret = -ENOMEM;
+		goto out_free_psif;
+	}
+	psif->io = io;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_dbg(&pdev->dev, "no mmio resources defined\n");
+		ret = -ENOMEM;
+		goto out_free_io;
+	}
+
+	psif->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!psif->regs) {
+		ret = -ENOMEM;
+		dev_dbg(&pdev->dev, "could not map I/O memory\n");
+		goto out_free_io;
+	}
+
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(pclk)) {
+		dev_dbg(&pdev->dev, "could not get peripheral clock\n");
+		ret = PTR_ERR(pclk);
+		goto out_iounmap;
+	}
+	psif->pclk = pclk;
+
+	/* Reset the PSIF to enter at a known state. */
+	ret = clk_enable(pclk);
+	if (ret) {
+		dev_dbg(&pdev->dev, "could not enable pclk\n");
+		goto out_put_clk;
+	}
+	psif_writel(psif, CR, PSIF_BIT(CR_SWRST));
+	clk_disable(pclk);
+
+	setup_timer(&psif->tx_timer, psif_transmit_data, (unsigned long)psif);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_dbg(&pdev->dev, "could not get irq\n");
+		ret = -ENXIO;
+		goto out_put_clk;
+	}
+	ret = request_irq(irq, psif_interrupt, IRQF_SHARED, "at32psif", psif);
+	if (ret) {
+		dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
+		goto out_put_clk;
+	}
+	psif->irq = irq;
+
+	io->id.type	= SERIO_8042;
+	io->write	= psif_write;
+	io->open	= psif_open;
+	io->close	= psif_close;
+	strlcpy(io->name, pdev->dev.bus_id, sizeof(io->name));
+	strlcpy(io->phys, pdev->dev.bus_id, sizeof(io->phys));
+	io->port_data	= psif;
+	io->dev.parent	= &pdev->dev;
+
+	psif_set_prescaler(psif);
+
+	spin_lock_init(&psif->lock);
+	serio_register_port(psif->io);
+	platform_set_drvdata(pdev, psif);
+
+	dev_info(&pdev->dev, "Atmel AVR32 PSIF PS/2 driver on 0x%08x irq %d\n",
+			(int)psif->regs, psif->irq);
+
+	return 0;
+
+out_put_clk:
+	clk_put(psif->pclk);
+out_iounmap:
+	iounmap(psif->regs);
+out_free_io:
+	kfree(io);
+out_free_psif:
+	kfree(psif);
+out:
+	return ret;
+}
+
+static int __exit psif_remove(struct platform_device *pdev)
+{
+	struct psif *psif = platform_get_drvdata(pdev);
+
+	psif_writel(psif, IDR, ~0UL);
+	psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS));
+
+	serio_unregister_port(psif->io);
+	iounmap(psif->regs);
+	free_irq(psif->irq, psif);
+	clk_put(psif->pclk);
+	kfree(psif);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int psif_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct psif *psif = platform_get_drvdata(pdev);
+
+	if (psif->open) {
+		psif_writel(psif, CR, PSIF_BIT(CR_RXDIS) | PSIF_BIT(CR_TXDIS));
+		clk_disable(psif->pclk);
+	}
+
+	return 0;
+}
+
+static int psif_resume(struct platform_device *pdev)
+{
+	struct psif *psif = platform_get_drvdata(pdev);
+
+	if (psif->open) {
+		clk_enable(psif->pclk);
+		psif_set_prescaler(psif);
+		psif_writel(psif, CR, PSIF_BIT(CR_RXEN) | PSIF_BIT(CR_TXEN));
+	}
+
+	return 0;
+}
+#else
+#define psif_suspend	NULL
+#define psif_resume	NULL
+#endif
+
+static struct platform_driver psif_driver = {
+	.remove		= __exit_p(psif_remove),
+	.driver		= {
+		.name	= "atmel_psif",
+	},
+	.suspend	= psif_suspend,
+	.resume		= psif_resume,
+};
+
+static int __init psif_init(void)
+{
+	return platform_driver_probe(&psif_driver, psif_probe);
+}
+
+static void __exit psif_exit(void)
+{
+	platform_driver_unregister(&psif_driver);
+}
+
+module_init(psif_init);
+module_exit(psif_exit);
+
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.24.3/drivers/input/serio/at32psif.h avr32-2.6/drivers/input/serio/at32psif.h
--- linux-2.6.24.3/drivers/input/serio/at32psif.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/input/serio/at32psif.h	2008-04-23 20:12:40.000000000 +0200
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * Driver for the AT32AP700X PS/2 controller (PSIF).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _AT32PSIF_H
+#define _AT32PSIF_H
+
+/* PSIF register offsets */
+#define PSIF_CR				0x00
+#define PSIF_RHR			0x04
+#define PSIF_THR			0x08
+#define PSIF_SR				0x10
+#define PSIF_IER			0x14
+#define PSIF_IDR			0x18
+#define PSIF_IMR			0x1c
+#define PSIF_PSR			0x24
+
+/* Bitfields in control register. */
+#define PSIF_CR_RXDIS_OFFSET		1
+#define PSIF_CR_RXDIS_SIZE		1
+#define PSIF_CR_RXEN_OFFSET		0
+#define PSIF_CR_RXEN_SIZE		1
+#define PSIF_CR_SWRST_OFFSET		15
+#define PSIF_CR_SWRST_SIZE		1
+#define PSIF_CR_TXDIS_OFFSET		9
+#define PSIF_CR_TXDIS_SIZE		1
+#define PSIF_CR_TXEN_OFFSET		8
+#define PSIF_CR_TXEN_SIZE		1
+
+/* Bitfields in interrupt disable, enable, mask and status register. */
+#define PSIF_NACK_OFFSET		8
+#define PSIF_NACK_SIZE			1
+#define PSIF_OVRUN_OFFSET		5
+#define PSIF_OVRUN_SIZE			1
+#define PSIF_PARITY_OFFSET		9
+#define PSIF_PARITY_SIZE		1
+#define PSIF_RXRDY_OFFSET		4
+#define PSIF_RXRDY_SIZE			1
+#define PSIF_TXEMPTY_OFFSET		1
+#define PSIF_TXEMPTY_SIZE		1
+#define PSIF_TXRDY_OFFSET		0
+#define PSIF_TXRDY_SIZE			1
+
+/* Bitfields in prescale register. */
+#define PSIF_PSR_PRSCV_OFFSET		0
+#define PSIF_PSR_PRSCV_SIZE		12
+
+/* Bitfields in receive hold register. */
+#define PSIF_RHR_RXDATA_OFFSET		0
+#define PSIF_RHR_RXDATA_SIZE		8
+
+/* Bitfields in transmit hold register. */
+#define PSIF_THR_TXDATA_OFFSET		0
+#define PSIF_THR_TXDATA_SIZE		8
+
+/* Bit manipulation macros */
+#define PSIF_BIT(name)					\
+	(1 << PSIF_##name##_OFFSET)
+#define PSIF_BF(name, value)				\
+	(((value) & ((1 << PSIF_##name##_SIZE) - 1))	\
+	 << PSIF_##name##_OFFSET)
+#define PSIF_BFEXT(name, value)\
+	(((value) >> PSIF_##name##_OFFSET)		\
+	 & ((1 << PSIF_##name##_SIZE) - 1))
+#define PSIF_BFINS(name, value, old)			\
+	(((old) & ~(((1 << PSIF_##name##_SIZE) - 1)	\
+		    << PSIF_##name##_OFFSET))		\
+	 | PSIF_BF(name, value))
+
+/* Register access macros */
+#define psif_readl(port, reg)				\
+	__raw_readl((port)->regs + PSIF_##reg)
+#define psif_writel(port, reg, value)			\
+	__raw_writel((value), (port)->regs + PSIF_##reg)
+
+#endif /* _AT32PSIF_H */
diff -urN linux-2.6.24.3/drivers/input/serio/Kconfig avr32-2.6/drivers/input/serio/Kconfig
--- linux-2.6.24.3/drivers/input/serio/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/input/serio/Kconfig	2008-04-23 20:12:40.000000000 +0200
@@ -88,6 +88,17 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called rpckbd.
 
+config SERIO_AT32PSIF
+	tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
+	depends on AVR32
+	default n
+	help
+	  Say Y here if you want to use the PSIF peripheral on AVR32 devices
+	  and connect a PS/2 keyboard and/or mouse to it.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called at32psif.
+
 config SERIO_AMBAKMI
 	tristate "AMBA KMI keyboard controller"
 	depends on ARM_AMBA
diff -urN linux-2.6.24.3/drivers/input/serio/Makefile avr32-2.6/drivers/input/serio/Makefile
--- linux-2.6.24.3/drivers/input/serio/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/input/serio/Makefile	2008-04-23 20:12:40.000000000 +0200
@@ -12,6 +12,7 @@
 obj-$(CONFIG_SERIO_RPCKBD)	+= rpckbd.o
 obj-$(CONFIG_SERIO_SA1111)	+= sa1111ps2.o
 obj-$(CONFIG_SERIO_AMBAKMI)	+= ambakmi.o
+obj-$(CONFIG_SERIO_AT32PSIF)	+= at32psif.o
 obj-$(CONFIG_SERIO_Q40KBD)	+= q40kbd.o
 obj-$(CONFIG_SERIO_GSCPS2)	+= gscps2.o
 obj-$(CONFIG_HP_SDC)		+= hp_sdc.o
diff -urN linux-2.6.24.3/drivers/leds/Kconfig avr32-2.6/drivers/leds/Kconfig
--- linux-2.6.24.3/drivers/leds/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/leds/Kconfig	2008-04-23 20:12:41.000000000 +0200
@@ -18,6 +18,13 @@
 
 comment "LED drivers"
 
+config LEDS_ATMEL_PWM
+	tristate "LED Support using Atmel PWM outputs"
+	depends on LEDS_CLASS && ATMEL_PWM
+	help
+	  This option enables support for LEDs driven using outputs
+	  of the dedicated PWM controller found on newer Atmel SOCs.
+
 config LEDS_CORGI
 	tristate "LED Support for the Sharp SL-C7x0 series"
 	depends on LEDS_CLASS && PXA_SHARP_C7xx
diff -urN linux-2.6.24.3/drivers/leds/leds-atmel-pwm.c avr32-2.6/drivers/leds/leds-atmel-pwm.c
--- linux-2.6.24.3/drivers/leds/leds-atmel-pwm.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/leds/leds-atmel-pwm.c	2008-04-23 19:33:39.000000000 +0200
@@ -0,0 +1,155 @@
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/atmel_pwm.h>
+
+
+struct pwmled {
+	struct led_classdev	cdev;
+	struct pwm_channel	pwmc;
+	struct gpio_led		*desc;
+	u32			mult;
+	u8			active_low;
+};
+
+
+/*
+ * For simplicity, we use "brightness" as if it were a linear function
+ * of PWM duty cycle.  However, a logarithmic function of duty cycle is
+ * probably a better match for perceived brightness: two is half as bright
+ * as four, four is half as bright as eight, etc
+ */
+static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
+{
+	struct pwmled		 *led;
+
+	/* update the duty cycle for the *next* period */
+	led = container_of(cdev, struct pwmled, cdev);
+	pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
+}
+
+/*
+ * NOTE:  we reuse the platform_data structure of GPIO leds,
+ * but repurpose its "gpio" number as a PWM channel number.
+ */
+static int __init pwmled_probe(struct platform_device *pdev)
+{
+	const struct gpio_led_platform_data	*pdata;
+	struct pwmled				*leds;
+	unsigned				i;
+	int					status;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata || pdata->num_leds < 1)
+		return -ENODEV;
+
+	leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
+	if (!leds)
+		return -ENOMEM;
+
+	for (i = 0; i < pdata->num_leds; i++) {
+		struct pwmled		*led = leds + i;
+		const struct gpio_led	*dat = pdata->leds + i;
+		u32			tmp;
+
+		led->cdev.name = dat->name;
+		led->cdev.brightness = LED_OFF;
+		led->cdev.brightness_set = pwmled_brightness;
+		led->cdev.default_trigger = dat->default_trigger;
+
+		led->active_low = dat->active_low;
+
+		status = pwm_channel_alloc(dat->gpio, &led->pwmc);
+		if (status < 0)
+			goto err;
+
+		/*
+		 * Prescale clock by 2^x, so PWM counts in low MHz.
+		 * Start each cycle with the LED active, so increasing
+		 * the duty cycle gives us more time on (== brighter).
+		 */
+		tmp = 5;
+		if (!led->active_low)
+			tmp |= PWM_CPR_CPOL;
+		pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
+
+		/*
+		 * Pick a period so PWM cycles at 100+ Hz; and a multiplier
+		 * for scaling duty cycle:  brightness * mult.
+		 */
+		tmp = (led->pwmc.mck / (1 << 5)) / 100;
+		tmp /= 255;
+		led->mult = tmp;
+		pwm_channel_writel(&led->pwmc, PWM_CDTY,
+				led->cdev.brightness * 255);
+		pwm_channel_writel(&led->pwmc, PWM_CPRD,
+				LED_FULL * tmp);
+
+		pwm_channel_enable(&led->pwmc);
+
+		/* Hand it over to the LED framework */
+		status = led_classdev_register(&pdev->dev, &led->cdev);
+		if (status < 0) {
+			pwm_channel_free(&led->pwmc);
+			goto err;
+		}
+	}
+
+	platform_set_drvdata(pdev, leds);
+	return 0;
+
+err:
+	while (i-- > 0) {
+		led_classdev_unregister(&leds[i].cdev);
+		pwm_channel_free(&leds[i].pwmc);
+	}
+	kfree(leds);
+
+	return status;
+}
+
+static int __exit pwmled_remove(struct platform_device *pdev)
+{
+	const struct gpio_led_platform_data	*pdata;
+	struct pwmled				*leds;
+	unsigned				i;
+
+	pdata = pdev->dev.platform_data;
+	leds = platform_get_drvdata(pdev);
+
+	for (i = 0; i < pdata->num_leds; i++) {
+		struct pwmled		*led = leds + i;
+
+		led_classdev_unregister(&led->cdev);
+		pwm_channel_free(&led->pwmc);
+	}
+
+	kfree(leds);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver pwmled_driver = {
+	.driver = {
+		.name =		"leds-atmel-pwm",
+		.owner =	THIS_MODULE,
+	},
+	/* REVISIT add suspend() and resume() methods */
+	.remove =	__exit_p(pwmled_remove),
+};
+
+static int __init modinit(void)
+{
+	return platform_driver_probe(&pwmled_driver, pwmled_probe);
+}
+module_init(modinit);
+
+static void __exit modexit(void)
+{
+	platform_driver_unregister(&pwmled_driver);
+}
+module_exit(modexit);
+
+MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.24.3/drivers/leds/Makefile avr32-2.6/drivers/leds/Makefile
--- linux-2.6.24.3/drivers/leds/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/leds/Makefile	2008-04-23 20:12:41.000000000 +0200
@@ -5,6 +5,7 @@
 obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
 
 # LED Platform Drivers
+obj-$(CONFIG_LEDS_ATMEL_PWM)		+= leds-atmel-pwm.o
 obj-$(CONFIG_LEDS_CORGI)		+= leds-corgi.o
 obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
 obj-$(CONFIG_LEDS_SPITZ)		+= leds-spitz.o
diff -urN linux-2.6.24.3/drivers/misc/atmel_pwm.c avr32-2.6/drivers/misc/atmel_pwm.c
--- linux-2.6.24.3/drivers/misc/atmel_pwm.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/misc/atmel_pwm.c	2008-04-23 19:33:40.000000000 +0200
@@ -0,0 +1,409 @@
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/atmel_pwm.h>
+
+
+/*
+ * This is a simple driver for the PWM controller found in various newer
+ * Atmel SOCs, including the AVR32 series and the AT91sam9263.
+ *
+ * Chips with current Linux ports have only 4 PWM channels, out of max 32.
+ * AT32UC3A and AT32UC3B chips have 7 channels (but currently no Linux).
+ * Docs are inconsistent about the width of the channel counter registers;
+ * it's at least 16 bits, but several places say 20 bits.
+ */
+#define	PWM_NCHAN	4		/* max 32 */
+
+struct pwm {
+	spinlock_t		lock;
+	struct platform_device	*pdev;
+	u32			mask;
+	int			irq;
+	void __iomem		*base;
+	struct clk		*clk;
+	struct pwm_channel	*channel[PWM_NCHAN];
+	void			(*handler[PWM_NCHAN])(struct pwm_channel *);
+};
+
+
+/* global PWM controller registers */
+#define PWM_MR		0x00
+#define PWM_ENA		0x04
+#define PWM_DIS		0x08
+#define PWM_SR		0x0c
+#define PWM_IER		0x10
+#define PWM_IDR		0x14
+#define PWM_IMR		0x18
+#define PWM_ISR		0x1c
+
+static inline void pwm_writel(const struct pwm *p, unsigned offset, u32 val)
+{
+	__raw_writel(val, p->base + offset);
+}
+
+static inline u32 pwm_readl(const struct pwm *p, unsigned offset)
+{
+	return __raw_readl(p->base + offset);
+}
+
+static inline void __iomem *pwmc_regs(const struct pwm *p, int index)
+{
+	return p->base + 0x200 + index * 0x20;
+}
+
+static struct pwm *pwm;
+
+static void pwm_dumpregs(struct pwm_channel *ch, char *tag)
+{
+	struct device	*dev = &pwm->pdev->dev;
+
+	dev_dbg(dev, "%s: mr %08x, sr %08x, imr %08x\n",
+		tag,
+		pwm_readl(pwm, PWM_MR),
+		pwm_readl(pwm, PWM_SR),
+		pwm_readl(pwm, PWM_IMR));
+	dev_dbg(dev,
+		"pwm ch%d - mr %08x, dty %u, prd %u, cnt %u\n",
+		ch->index,
+		pwm_channel_readl(ch, PWM_CMR),
+		pwm_channel_readl(ch, PWM_CDTY),
+		pwm_channel_readl(ch, PWM_CPRD),
+		pwm_channel_readl(ch, PWM_CCNT));
+}
+
+
+/**
+ * pwm_channel_alloc - allocate an unused PWM channel
+ * @index: identifies the channel
+ * @ch: structure to be initialized
+ *
+ * Drivers allocate PWM channels according to the board's wiring, and
+ * matching board-specific setup code.  Returns zero or negative errno.
+ */
+int pwm_channel_alloc(int index, struct pwm_channel *ch)
+{
+	unsigned long	flags;
+	int		status = 0;
+
+	/* insist on PWM init, with this signal pinned out */
+	if (!pwm || !(pwm->mask & 1 << index))
+		return -ENODEV;
+
+	if (index < 0 || index >= PWM_NCHAN || !ch)
+		return -EINVAL;
+	memset(ch, 0, sizeof *ch);
+
+	spin_lock_irqsave(&pwm->lock, flags);
+	if (pwm->channel[index])
+		status = -EBUSY;
+	else {
+		clk_enable(pwm->clk);
+
+		ch->regs = pwmc_regs(pwm, index);
+		ch->index = index;
+
+		/* REVISIT: ap7000 seems to go 2x as fast as we expect!! */
+		ch->mck = clk_get_rate(pwm->clk);
+
+		pwm->channel[index] = ch;
+		pwm->handler[index] = NULL;
+
+		/* channel and irq are always disabled when we return */
+		pwm_writel(pwm, PWM_DIS, 1 << index);
+		pwm_writel(pwm, PWM_IDR, 1 << index);
+	}
+	spin_unlock_irqrestore(&pwm->lock, flags);
+	return status;
+}
+EXPORT_SYMBOL(pwm_channel_alloc);
+
+static int pwmcheck(struct pwm_channel *ch)
+{
+	int		index;
+
+	if (!pwm)
+		return -ENODEV;
+	if (!ch)
+		return -EINVAL;
+	index = ch->index;
+	if (index < 0 || index >= PWM_NCHAN || pwm->channel[index] != ch)
+		return -EINVAL;
+
+	return index;
+}
+
+/**
+ * pwm_channel_free - release a previously allocated channel
+ * @ch: the channel being released
+ *
+ * The channel is completely shut down (counter and IRQ disabled),
+ * and made available for re-use.  Returns zero, or negative errno.
+ */
+int pwm_channel_free(struct pwm_channel *ch)
+{
+	unsigned long	flags;
+	int		t;
+
+	spin_lock_irqsave(&pwm->lock, flags);
+	t = pwmcheck(ch);
+	if (t >= 0) {
+		pwm->channel[t] = NULL;
+		pwm->handler[t] = NULL;
+
+		/* channel and irq are always disabled when we return */
+		pwm_writel(pwm, PWM_DIS, 1 << t);
+		pwm_writel(pwm, PWM_IDR, 1 << t);
+
+		clk_disable(pwm->clk);
+		t = 0;
+	}
+	spin_unlock_irqrestore(&pwm->lock, flags);
+	return t;
+}
+EXPORT_SYMBOL(pwm_channel_free);
+
+int __pwm_channel_onoff(struct pwm_channel *ch, int enabled)
+{
+	unsigned long	flags;
+	int		t;
+
+	/* OMITTED FUNCTIONALITY:  starting several channels in synch */
+
+	spin_lock_irqsave(&pwm->lock, flags);
+	t = pwmcheck(ch);
+	if (t >= 0) {
+		pwm_writel(pwm, enabled ? PWM_ENA : PWM_DIS, 1 << t);
+		t = 0;
+		pwm_dumpregs(ch, enabled ? "enable" : "disable");
+	}
+	spin_unlock_irqrestore(&pwm->lock, flags);
+
+	return t;
+}
+EXPORT_SYMBOL(__pwm_channel_onoff);
+
+/**
+ * pwm_clk_alloc - allocate and configure CLKA or CLKB
+ * @prescale: from 0..10, the power of two used to divide MCK
+ * @div: from 1..255, the linear divisor to use
+ *
+ * Returns PWM_CPR_CLKA, PWM_CPR_CLKB, or negative errno.  The allocated
+ * clock will run with a period of (2^prescale * div) / MCK, or twice as
+ * long if center aligned PWM output is used.  The clock must later be
+ * deconfigured using pwm_clk_free().
+ */
+int pwm_clk_alloc(unsigned prescale, unsigned div)
+{
+	unsigned long	flags;
+	u32		mr;
+	u32		val = (prescale << 8) | div;
+	int		ret = -EBUSY;
+
+	if (prescale >= 10 || div == 0 || div > 255)
+		return -EINVAL;
+
+	spin_lock_irqsave(&pwm->lock, flags);
+	mr = pwm_readl(pwm, PWM_MR);
+	if ((mr & 0xffff) == 0) {
+		mr |= val;
+		ret = PWM_CPR_CLKA;
+	}
+	if ((mr & (0xffff << 16)) == 0) {
+		mr |= val << 16;
+		ret = PWM_CPR_CLKB;
+	}
+	if (ret > 0)
+		pwm_writel(pwm, PWM_MR, mr);
+	spin_unlock_irqrestore(&pwm->lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(pwm_clk_alloc);
+
+/**
+ * pwm_clk_free - deconfigure and release CLKA or CLKB
+ *
+ * Reverses the effect of pwm_clk_alloc().
+ */
+void pwm_clk_free(unsigned clk)
+{
+	unsigned long	flags;
+	u32		mr;
+
+	spin_lock_irqsave(&pwm->lock, flags);
+	mr = pwm_readl(pwm, PWM_MR);
+	if (clk == PWM_CPR_CLKA)
+		pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 0));
+	if (clk == PWM_CPR_CLKB)
+		pwm_writel(pwm, PWM_MR, mr & ~(0xffff << 16));
+	spin_unlock_irqrestore(&pwm->lock, flags);
+}
+EXPORT_SYMBOL(pwm_clk_free);
+
+/**
+ * pwm_channel_handler - manage channel's IRQ handler
+ * @ch: the channel
+ * @handler: the handler to use, possibly NULL
+ *
+ * If the handler is non-null, the handler will be called after every
+ * period of this PWM channel.  If the handler is null, this channel
+ * won't generate an IRQ.
+ */
+int pwm_channel_handler(struct pwm_channel *ch,
+		void (*handler)(struct pwm_channel *ch))
+{
+	unsigned long	flags;
+	int		t;
+
+	spin_lock_irqsave(&pwm->lock, flags);
+	t = pwmcheck(ch);
+	if (t >= 0) {
+		pwm->handler[t] = handler;
+		pwm_writel(pwm, handler ? PWM_IER : PWM_IDR, 1 << t);
+		t = 0;
+	}
+	spin_unlock_irqrestore(&pwm->lock, flags);
+
+	return t;
+}
+EXPORT_SYMBOL(pwm_channel_handler);
+
+static irqreturn_t pwm_irq(int id, void *_pwm)
+{
+	struct pwm	*p = _pwm;
+	irqreturn_t	handled = IRQ_NONE;
+	u32		irqstat;
+	int		index;
+
+	spin_lock(&p->lock);
+
+	/* ack irqs, then handle them */
+	irqstat = pwm_readl(pwm, PWM_ISR);
+
+	while (irqstat) {
+		struct pwm_channel *ch;
+		void (*handler)(struct pwm_channel *ch);
+
+		index = ffs(irqstat) - 1;
+		irqstat &= ~(1 << index);
+		ch = pwm->channel[index];
+		handler = pwm->handler[index];
+		if (handler && ch) {
+			spin_unlock(&p->lock);
+			handler(ch);
+			spin_lock(&p->lock);
+			handled = IRQ_HANDLED;
+		}
+	}
+
+	spin_unlock(&p->lock);
+	return handled;
+}
+
+static int __init pwm_probe(struct platform_device *pdev)
+{
+	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int irq = platform_get_irq(pdev, 0);
+	u32 *mp = pdev->dev.platform_data;
+	struct pwm *p;
+	int status = -EIO;
+
+	if (pwm)
+		return -EBUSY;
+	if (!r || irq < 0 || !mp || !*mp)
+		return -ENODEV;
+	if (*mp & ~((1<<PWM_NCHAN)-1)) {
+		dev_warn(&pdev->dev, "mask 0x%x ... more than %d channels\n",
+			*mp, PWM_NCHAN);
+		return -EINVAL;
+	}
+
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	spin_lock_init(&p->lock);
+	p->pdev = pdev;
+	p->mask = *mp;
+	p->irq = irq;
+	p->base = ioremap(r->start, r->end - r->start + 1);
+	if (!p->base)
+		goto fail;
+	p->clk = clk_get(&pdev->dev, "mck");
+	if (IS_ERR(p->clk)) {
+		status = PTR_ERR(p->clk);
+		p->clk = NULL;
+		goto fail;
+	}
+
+	status = request_irq(irq, pwm_irq, 0, pdev->name, p);
+	if (status < 0)
+		goto fail;
+
+	pwm = p;
+	platform_set_drvdata(pdev, p);
+
+	return 0;
+
+fail:
+	if (p->clk)
+		clk_put(p->clk);
+	if (p->base)
+		iounmap(p->base);
+
+	kfree(p);
+	return status;
+}
+
+static int __exit pwm_remove(struct platform_device *pdev)
+{
+	struct pwm *p = platform_get_drvdata(pdev);
+
+	if (p != pwm)
+		return -EINVAL;
+
+	clk_enable(pwm->clk);
+	pwm_writel(pwm, PWM_DIS, (1 << PWM_NCHAN) - 1);
+	pwm_writel(pwm, PWM_IDR, (1 << PWM_NCHAN) - 1);
+	clk_disable(pwm->clk);
+
+	pwm = NULL;
+
+	free_irq(p->irq, p);
+	clk_put(p->clk);
+	iounmap(p->base);
+	kfree(p);
+
+	return 0;
+}
+
+static struct platform_driver atmel_pwm_driver = {
+	.driver = {
+		.name = "atmel_pwm",
+		.owner = THIS_MODULE,
+	},
+	.remove = __exit_p(pwm_remove),
+
+	/* NOTE: PWM can keep running in AVR32 "idle" and "frozen" states;
+	 * and all AT91sam9263 states, albeit at reduced clock rate if
+	 * MCK becomes the slow clock (i.e. what Linux labels STR).
+	 */
+};
+
+static int __init pwm_init(void)
+{
+	return platform_driver_probe(&atmel_pwm_driver, pwm_probe);
+}
+module_init(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+	platform_driver_unregister(&atmel_pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.24.3/drivers/misc/atmel_tclib.c avr32-2.6/drivers/misc/atmel_tclib.c
--- linux-2.6.24.3/drivers/misc/atmel_tclib.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/misc/atmel_tclib.c	2008-04-23 20:12:41.000000000 +0200
@@ -0,0 +1,161 @@
+#include <linux/atmel_tc.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+/* Number of bytes to reserve for the iomem resource */
+#define ATMEL_TC_IOMEM_SIZE	256
+
+
+/*
+ * This is a thin library to solve the problem of how to portably allocate
+ * one of the TC blocks.  For simplicity, it doesn't currently expect to
+ * share individual timers between different drivers.
+ */
+
+#if defined(CONFIG_AVR32)
+/* AVR32 has these divide PBB */
+const u8 atmel_tc_divisors[5] = { 0, 4, 8, 16, 32, };
+EXPORT_SYMBOL(atmel_tc_divisors);
+
+#elif defined(CONFIG_ARCH_AT91)
+/* AT91 has these divide MCK */
+const u8 atmel_tc_divisors[5] = { 2, 8, 32, 128, 0, };
+EXPORT_SYMBOL(atmel_tc_divisors);
+
+#endif
+
+static DEFINE_SPINLOCK(tc_list_lock);
+static LIST_HEAD(tc_list);
+
+/**
+ * atmel_tc_alloc - allocate a specified TC block
+ * @block: which block to allocate
+ * @name: name to be associated with the iomem resource
+ *
+ * Caller allocates a block.  If it is available, a pointer to a
+ * pre-initialized struct atmel_tc is returned. The caller can access
+ * the registers directly through the "regs" field.
+ */
+struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
+{
+	struct atmel_tc		*tc;
+	struct platform_device	*pdev = NULL;
+	struct resource		*r;
+
+	spin_lock(&tc_list_lock);
+	list_for_each_entry(tc, &tc_list, node) {
+		if (tc->pdev->id == block) {
+			pdev = tc->pdev;
+			break;
+		}
+	}
+
+	if (!pdev || tc->iomem)
+		goto fail;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	r = request_mem_region(r->start, ATMEL_TC_IOMEM_SIZE, name);
+	if (!r)
+		goto fail;
+
+	tc->regs = ioremap(r->start, ATMEL_TC_IOMEM_SIZE);
+	if (!tc->regs)
+		goto fail_ioremap;
+
+	tc->iomem = r;
+
+out:
+	spin_unlock(&tc_list_lock);
+	return tc;
+
+fail_ioremap:
+	release_resource(r);
+fail:
+	tc = NULL;
+	goto out;
+}
+EXPORT_SYMBOL_GPL(atmel_tc_alloc);
+
+/**
+ * atmel_tc_free - release a specified TC block
+ * @tc: Timer/counter block that was returned by atmel_tc_alloc()
+ *
+ * This reverses the effect of atmel_tc_alloc(), unmapping the I/O
+ * registers, invalidating the resource returned by that routine and
+ * making the TC available to other drivers.
+ */
+void atmel_tc_free(struct atmel_tc *tc)
+{
+	spin_lock(&tc_list_lock);
+	if (tc->regs) {
+		iounmap(tc->regs);
+		release_resource(tc->iomem);
+		tc->regs = NULL;
+		tc->iomem = NULL;
+	}
+	spin_unlock(&tc_list_lock);
+}
+EXPORT_SYMBOL_GPL(atmel_tc_free);
+
+static int __init tc_probe(struct platform_device *pdev)
+{
+	struct atmel_tc *tc;
+	struct clk	*clk;
+	int		irq;
+
+	if (!platform_get_resource(pdev, IORESOURCE_MEM, 0))
+		return -EINVAL;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -EINVAL;
+
+	tc = kzalloc(sizeof(struct atmel_tc), GFP_KERNEL);
+	if (!tc)
+		return -ENOMEM;
+
+	tc->pdev = pdev;
+
+	clk = clk_get(&pdev->dev, "t0_clk");
+	if (IS_ERR(clk)) {
+		kfree(tc);
+		return -EINVAL;
+	}
+
+	tc->clk[0] = clk;
+	tc->clk[1] = clk_get(&pdev->dev, "t1_clk");
+	if (IS_ERR(tc->clk[1]))
+		tc->clk[1] = clk;
+	tc->clk[2] = clk_get(&pdev->dev, "t2_clk");
+	if (IS_ERR(tc->clk[2]))
+		tc->clk[2] = clk;
+
+	tc->irq[0] = irq;
+	tc->irq[1] = platform_get_irq(pdev, 1);
+	if (tc->irq[1] < 0)
+		tc->irq[1] = irq;
+	tc->irq[2] = platform_get_irq(pdev, 2);
+	if (tc->irq[2] < 0)
+		tc->irq[2] = irq;
+
+	spin_lock(&tc_list_lock);
+	list_add_tail(&tc->node, &tc_list);
+	spin_unlock(&tc_list_lock);
+
+	return 0;
+}
+
+static struct platform_driver tc_driver = {
+	.driver.name	= "atmel_tcb",
+};
+
+static int __init tc_init(void)
+{
+	return platform_driver_probe(&tc_driver, tc_probe);
+}
+arch_initcall(tc_init);
diff -urN linux-2.6.24.3/drivers/misc/Kconfig avr32-2.6/drivers/misc/Kconfig
--- linux-2.6.24.3/drivers/misc/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/misc/Kconfig	2008-04-23 20:12:41.000000000 +0200
@@ -13,6 +13,48 @@
 
 if MISC_DEVICES
 
+config ATMEL_PWM
+	tristate "Atmel AT32/AT91 PWM support"
+	depends on AVR32 || ARCH_AT91
+	help
+	  This option enables device driver support for the PWM channels
+	  on certain Atmel prcoessors.  Pulse Width Modulation is used for
+	  purposes including software controlled power-efficent backlights
+	  on LCD displays, motor control, and waveform generation.
+
+config ATMEL_TCLIB
+	bool "Atmel AT32/AT91 Timer/Counter Library"
+	depends on (AVR32 || ARCH_AT91)
+	help
+	  Select this if you want a library to allocate the Timer/Counter
+	  blocks found on many Atmel processors.  This facilitates using
+	  these blocks by different drivers despite processor differences.
+
+config ATMEL_TCB_CLKSRC
+	bool "TC Block Clocksource"
+	depends on ATMEL_TCLIB && GENERIC_TIME
+	default y
+	help
+	  Select this to get a high precision clocksource based on a
+	  TC block with a 5+ MHz base clock rate.  Two timer channels
+	  are combined to make a single 32-bit timer.
+
+	  When GENERIC_CLOCKEVENTS is defined, the third timer channel
+	  may be used as a clock event device supporting oneshot mode
+	  (delays of up to two seconds) based on the 32 KiHz clock.
+
+config ATMEL_TCB_CLKSRC_BLOCK
+	int
+	depends on ATMEL_TCB_CLKSRC
+	prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
+	default 0
+	range 0 1
+	help
+	  Some chips provide more than one TC block, so you have the
+	  choice of which one to use for the clock framework.  The other
+	  TC can be used for other purposes, such as PWM generation and
+	  interval timing.
+
 config IBM_ASM
 	tristate "Device driver for IBM RSA service processor"
 	depends on X86 && PCI && INPUT && EXPERIMENTAL
diff -urN linux-2.6.24.3/drivers/misc/Makefile avr32-2.6/drivers/misc/Makefile
--- linux-2.6.24.3/drivers/misc/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/misc/Makefile	2008-04-23 20:12:41.000000000 +0200
@@ -7,7 +7,9 @@
 obj-$(CONFIG_HDPU_FEATURES)	+= hdpuftrs/
 obj-$(CONFIG_MSI_LAPTOP)     += msi-laptop.o
 obj-$(CONFIG_ASUS_LAPTOP)     += asus-laptop.o
+obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
+obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
 obj-$(CONFIG_LKDTM)		+= lkdtm.o
 obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
 obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
diff -urN linux-2.6.24.3/drivers/mmc/host/atmel-mci.c avr32-2.6/drivers/mmc/host/atmel-mci.c
--- linux-2.6.24.3/drivers/mmc/host/atmel-mci.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/mmc/host/atmel-mci.c	2008-04-23 20:12:41.000000000 +0200
@@ -0,0 +1,1220 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/blkdev.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/dma-controller.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "atmel-mci.h"
+
+#define DRIVER_NAME "atmel_mci"
+
+#define MCI_DATA_ERROR_FLAGS	(MCI_BIT(DCRCE) | MCI_BIT(DTOE) |	\
+				 MCI_BIT(OVRE) | MCI_BIT(UNRE))
+
+enum {
+	EVENT_CMD_COMPLETE = 0,
+	EVENT_DATA_COMPLETE,
+	EVENT_DATA_ERROR,
+	EVENT_STOP_SENT,
+	EVENT_STOP_COMPLETE,
+	EVENT_DMA_COMPLETE,
+	EVENT_DMA_ERROR,
+};
+
+struct atmel_mci_dma {
+	struct dma_request_sg	req;
+	unsigned short		rx_periph_id;
+	unsigned short		tx_periph_id;
+};
+
+struct atmel_mci {
+	struct mmc_host		*mmc;
+	void __iomem		*regs;
+	struct atmel_mci_dma	dma;
+
+	struct mmc_request	*mrq;
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+
+	u32			cmd_status;
+	u32			data_status;
+	u32			stop_status;
+	u32			stop_cmdr;
+
+	struct tasklet_struct	tasklet;
+	unsigned long		pending_events;
+	unsigned long		completed_events;
+
+	int			present;
+	int			detect_pin;
+	int			wp_pin;
+
+	/* For detect pin debouncing */
+	struct timer_list	detect_timer;
+
+	unsigned long		bus_hz;
+	unsigned long		mapbase;
+	struct clk		*mck;
+	struct platform_device	*pdev;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry		*debugfs_root;
+	struct dentry		*debugfs_regs;
+	struct dentry		*debugfs_req;
+	struct dentry		*debugfs_pending_events;
+	struct dentry		*debugfs_completed_events;
+#endif
+};
+
+/* Those printks take an awful lot of time... */
+#ifndef DEBUG
+static unsigned int fmax = 15000000U;
+#else
+static unsigned int fmax = 1000000U;
+#endif
+module_param(fmax, uint, 0444);
+MODULE_PARM_DESC(fmax, "Max frequency in Hz of the MMC bus clock");
+
+/* Test bit macros for completed events */
+#define mci_cmd_is_complete(host)			\
+	test_bit(EVENT_CMD_COMPLETE, &host->completed_events)
+#define mci_data_is_complete(host)			\
+	test_bit(EVENT_DATA_COMPLETE, &host->completed_events)
+#define mci_data_error_is_complete(host)		\
+	test_bit(EVENT_DATA_ERROR, &host->completed_events)
+#define mci_stop_sent_is_complete(host)			\
+	test_bit(EVENT_STOP_SENT, &host->completed_events)
+#define mci_stop_is_complete(host)			\
+	test_bit(EVENT_STOP_COMPLETE, &host->completed_events)
+#define mci_dma_is_complete(host)			\
+	test_bit(EVENT_DMA_COMPLETE, &host->completed_events)
+#define mci_dma_error_is_complete(host)			\
+	test_bit(EVENT_DMA_ERROR, &host->completed_events)
+
+/* Test and clear bit macros for pending events */
+#define mci_clear_cmd_is_pending(host)			\
+	test_and_clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
+#define mci_clear_data_is_pending(host)			\
+	test_and_clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
+#define mci_clear_data_error_is_pending(host)		\
+	test_and_clear_bit(EVENT_DATA_ERROR, &host->pending_events)
+#define mci_clear_stop_sent_is_pending(host)		\
+	test_and_clear_bit(EVENT_STOP_SENT, &host->pending_events)
+#define mci_clear_stop_is_pending(host)			\
+	test_and_clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+#define mci_clear_dma_error_is_pending(host)		\
+	test_and_clear_bit(EVENT_DMA_ERROR, &host->pending_events)
+
+/* Test and set bit macros for completed events */
+#define mci_set_cmd_is_completed(host)			\
+	test_and_set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
+#define mci_set_data_is_completed(host)			\
+	test_and_set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
+#define mci_set_data_error_is_completed(host)		\
+	test_and_set_bit(EVENT_DATA_ERROR, &host->completed_events)
+#define mci_set_stop_sent_is_completed(host)		\
+	test_and_set_bit(EVENT_STOP_SENT, &host->completed_events)
+#define mci_set_stop_is_completed(host)			\
+	test_and_set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
+#define mci_set_dma_error_is_completed(host)		\
+	test_and_set_bit(EVENT_DMA_ERROR, &host->completed_events)
+
+/* Set bit macros for completed events */
+#define mci_set_cmd_complete(host)			\
+	set_bit(EVENT_CMD_COMPLETE, &host->completed_events)
+#define mci_set_data_complete(host)			\
+	set_bit(EVENT_DATA_COMPLETE, &host->completed_events)
+#define mci_set_data_error_complete(host)		\
+	set_bit(EVENT_DATA_ERROR, &host->completed_events)
+#define mci_set_stop_sent_complete(host)		\
+	set_bit(EVENT_STOP_SENT, &host->completed_events)
+#define mci_set_stop_complete(host)			\
+	set_bit(EVENT_STOP_COMPLETE, &host->completed_events)
+#define mci_set_dma_complete(host)			\
+	set_bit(EVENT_DMA_COMPLETE, &host->completed_events)
+#define mci_set_dma_error_complete(host)		\
+	set_bit(EVENT_DMA_ERROR, &host->completed_events)
+
+/* Set bit macros for pending events */
+#define mci_set_cmd_pending(host)			\
+	set_bit(EVENT_CMD_COMPLETE, &host->pending_events)
+#define mci_set_data_pending(host)			\
+	set_bit(EVENT_DATA_COMPLETE, &host->pending_events)
+#define mci_set_data_error_pending(host)		\
+	set_bit(EVENT_DATA_ERROR, &host->pending_events)
+#define mci_set_stop_sent_pending(host)			\
+	set_bit(EVENT_STOP_SENT, &host->pending_events)
+#define mci_set_stop_pending(host)			\
+	set_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+#define mci_set_dma_error_pending(host)			\
+	set_bit(EVENT_DMA_ERROR, &host->pending_events)
+
+/* Clear bit macros for pending events */
+#define mci_clear_cmd_pending(host)			\
+	clear_bit(EVENT_CMD_COMPLETE, &host->pending_events)
+#define mci_clear_data_pending(host)			\
+	clear_bit(EVENT_DATA_COMPLETE, &host->pending_events)
+#define mci_clear_data_error_pending(host)		\
+	clear_bit(EVENT_DATA_ERROR, &host->pending_events)
+#define mci_clear_stop_sent_pending(host)		\
+	clear_bit(EVENT_STOP_SENT, &host->pending_events)
+#define mci_clear_stop_pending(host)			\
+	clear_bit(EVENT_STOP_COMPLETE, &host->pending_events)
+#define mci_clear_dma_error_pending(host)		\
+	clear_bit(EVENT_DMA_ERROR, &host->pending_events)
+
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+
+#define DBG_REQ_BUF_SIZE	(4096 - sizeof(unsigned int))
+
+struct req_dbg_data {
+	unsigned int nbytes;
+	char str[DBG_REQ_BUF_SIZE];
+};
+
+static int req_dbg_open(struct inode *inode, struct file *file)
+{
+	struct atmel_mci *host;
+	struct mmc_request *mrq;
+	struct mmc_command *cmd, *stop;
+	struct mmc_data *data;
+	struct req_dbg_data *priv;
+	char *str;
+	unsigned long n = 0;
+
+	priv = kzalloc(DBG_REQ_BUF_SIZE, GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	str = priv->str;
+
+	mutex_lock(&inode->i_mutex);
+	host = inode->i_private;
+
+	spin_lock_irq(&host->mmc->lock);
+	mrq = host->mrq;
+	if (mrq) {
+		cmd = mrq->cmd;
+		data = mrq->data;
+		stop = mrq->stop;
+		n = snprintf(str, DBG_REQ_BUF_SIZE,
+			     "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
+			     cmd->opcode, cmd->arg, cmd->flags,
+			     cmd->resp[0], cmd->resp[1], cmd->resp[2],
+			     cmd->resp[3], cmd->error);
+		if (n < DBG_REQ_BUF_SIZE && data)
+			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
+				      "DATA %u * %u (%u) %x (err %u)\n",
+				      data->blocks, data->blksz,
+				      data->bytes_xfered, data->flags,
+				      data->error);
+		if (n < DBG_REQ_BUF_SIZE && stop)
+			n += snprintf(str + n, DBG_REQ_BUF_SIZE - n,
+				      "CMD%u(0x%x) %x %x %x %x %x (err %u)\n",
+				      stop->opcode, stop->arg, stop->flags,
+				      stop->resp[0], stop->resp[1],
+				      stop->resp[2], stop->resp[3],
+				      stop->error);
+	}
+	spin_unlock_irq(&host->mmc->lock);
+	mutex_unlock(&inode->i_mutex);
+
+	priv->nbytes = min(n, DBG_REQ_BUF_SIZE);
+	file->private_data = priv;
+
+	return 0;
+}
+
+static ssize_t req_dbg_read(struct file *file, char __user *buf,
+			    size_t nbytes, loff_t *ppos)
+{
+	struct req_dbg_data *priv = file->private_data;
+
+	return simple_read_from_buffer(buf, nbytes, ppos,
+				       priv->str, priv->nbytes);
+}
+
+static int req_dbg_release(struct inode *inode, struct file *file)
+{
+	kfree(file->private_data);
+	return 0;
+}
+
+static const struct file_operations req_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= req_dbg_open,
+	.llseek		= no_llseek,
+	.read		= req_dbg_read,
+	.release	= req_dbg_release,
+};
+
+static int regs_dbg_open(struct inode *inode, struct file *file)
+{
+	struct atmel_mci *host;
+	unsigned int i;
+	u32 *data;
+	int ret = -ENOMEM;
+
+	mutex_lock(&inode->i_mutex);
+	host = inode->i_private;
+	data = kmalloc(inode->i_size, GFP_KERNEL);
+	if (!data)
+		goto out;
+
+	spin_lock_irq(&host->mmc->lock);
+	for (i = 0; i < inode->i_size / 4; i++)
+		data[i] = __raw_readl(host->regs + i * 4);
+	spin_unlock_irq(&host->mmc->lock);
+
+	file->private_data = data;
+	ret = 0;
+
+out:
+	mutex_unlock(&inode->i_mutex);
+
+	return ret;
+}
+
+static ssize_t regs_dbg_read(struct file *file, char __user *buf,
+			     size_t nbytes, loff_t *ppos)
+{
+	struct inode *inode = file->f_dentry->d_inode;
+	int ret;
+
+	mutex_lock(&inode->i_mutex);
+	ret = simple_read_from_buffer(buf, nbytes, ppos,
+				      file->private_data,
+				      file->f_dentry->d_inode->i_size);
+	mutex_unlock(&inode->i_mutex);
+
+	return ret;
+}
+
+static int regs_dbg_release(struct inode *inode, struct file *file)
+{
+	kfree(file->private_data);
+	return 0;
+}
+
+static const struct file_operations regs_dbg_fops = {
+	.owner		= THIS_MODULE,
+	.open		= regs_dbg_open,
+	.llseek		= generic_file_llseek,
+	.read		= regs_dbg_read,
+	.release	= regs_dbg_release,
+};
+
+static void atmci_init_debugfs(struct atmel_mci *host)
+{
+	struct mmc_host *mmc;
+	struct dentry *root, *regs;
+	struct resource *res;
+
+	mmc = host->mmc;
+	root = debugfs_create_dir(mmc_hostname(mmc), NULL);
+	if (IS_ERR(root) || !root)
+		goto err_root;
+	host->debugfs_root = root;
+
+	regs = debugfs_create_file("regs", 0400, root, host, &regs_dbg_fops);
+	if (!regs)
+		goto err_regs;
+
+	res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
+	regs->d_inode->i_size = res->end - res->start + 1;
+	host->debugfs_regs = regs;
+
+	host->debugfs_req = debugfs_create_file("req", 0400, root,
+						host, &req_dbg_fops);
+	if (!host->debugfs_req)
+		goto err_req;
+
+	host->debugfs_pending_events
+		= debugfs_create_u32("pending_events", 0400, root,
+				     (u32 *)&host->pending_events);
+	if (!host->debugfs_pending_events)
+		goto err_pending_events;
+
+	host->debugfs_completed_events
+		= debugfs_create_u32("completed_events", 0400, root,
+				     (u32 *)&host->completed_events);
+	if (!host->debugfs_completed_events)
+		goto err_completed_events;
+
+	return;
+
+err_completed_events:
+	debugfs_remove(host->debugfs_pending_events);
+err_pending_events:
+	debugfs_remove(host->debugfs_req);
+err_req:
+	debugfs_remove(host->debugfs_regs);
+err_regs:
+	debugfs_remove(host->debugfs_root);
+err_root:
+	host->debugfs_root = NULL;
+	dev_err(&host->pdev->dev,
+		"failed to initialize debugfs for %s\n",
+		mmc_hostname(mmc));
+}
+
+static void atmci_cleanup_debugfs(struct atmel_mci *host)
+{
+	if (host->debugfs_root) {
+		debugfs_remove(host->debugfs_completed_events);
+		debugfs_remove(host->debugfs_pending_events);
+		debugfs_remove(host->debugfs_req);
+		debugfs_remove(host->debugfs_regs);
+		debugfs_remove(host->debugfs_root);
+		host->debugfs_root = NULL;
+	}
+}
+#else
+static inline void atmci_init_debugfs(struct atmel_mci *host)
+{
+
+}
+
+static inline void atmci_cleanup_debugfs(struct atmel_mci *host)
+{
+
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static inline unsigned int ns_to_clocks(struct atmel_mci *host,
+					unsigned int ns)
+{
+	return (ns * (host->bus_hz / 1000000) + 999) / 1000;
+}
+
+static void atmci_set_timeout(struct atmel_mci *host,
+			      struct mmc_data *data)
+{
+	static unsigned dtomul_to_shift[] = {
+		0, 4, 7, 8, 10, 12, 16, 20
+	};
+	unsigned timeout;
+	unsigned dtocyc, dtomul;
+
+	timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
+
+	for (dtomul = 0; dtomul < 8; dtomul++) {
+		unsigned shift = dtomul_to_shift[dtomul];
+		dtocyc = (timeout + (1 << shift) - 1) >> shift;
+		if (dtocyc < 15)
+			break;
+	}
+
+	if (dtomul >= 8) {
+		dtomul = 7;
+		dtocyc = 15;
+	}
+
+	dev_dbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
+			dtocyc << dtomul_to_shift[dtomul]);
+	mci_writel(host, DTOR, (MCI_BF(DTOMUL, dtomul)
+				| MCI_BF(DTOCYC, dtocyc)));
+}
+
+/*
+ * Return mask with command flags to be enabled for this command.
+ */
+static u32 atmci_prepare_command(struct mmc_host *mmc,
+				 struct mmc_command *cmd)
+{
+	u32 cmdr;
+
+	cmd->error = 0;
+
+	cmdr = MCI_BF(CMDNB, cmd->opcode);
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136)
+			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_136_BIT);
+		else
+			cmdr |= MCI_BF(RSPTYP, MCI_RSPTYP_48_BIT);
+	}
+
+	/*
+	 * This should really be MAXLAT_5 for CMD2 and ACMD41, but
+	 * it's too difficult to determine whether this is an ACMD or
+	 * not. Better make it 64.
+	 */
+	cmdr |= MCI_BIT(MAXLAT);
+
+	if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
+		cmdr |= MCI_BIT(OPDCMD);
+
+	dev_dbg(&mmc->class_dev,
+		"cmd: op %02x arg %08x flags %08x, cmdflags %08lx\n",
+		cmd->opcode, cmd->arg, cmd->flags, (unsigned long)cmdr);
+
+	return cmdr;
+}
+
+static void atmci_start_command(struct atmel_mci *host,
+				struct mmc_command *cmd,
+				u32 cmd_flags)
+{
+	WARN_ON(host->cmd);
+	host->cmd = cmd;
+
+	mci_writel(host, ARGR, cmd->arg);
+	mci_writel(host, CMDR, cmd_flags);
+
+	if (cmd->data)
+		dma_start_request(host->dma.req.req.dmac,
+				  host->dma.req.req.channel);
+}
+
+/*
+ * Returns a mask of flags to be set in the command register when the
+ * command to start the transfer is to be sent.
+ */
+static u32 atmci_prepare_data(struct mmc_host *mmc, struct mmc_data *data)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+	u32 cmd_flags;
+
+	WARN_ON(host->data);
+	host->data = data;
+
+	atmci_set_timeout(host, data);
+	mci_writel(host, BLKR, (MCI_BF(BCNT, data->blocks)
+				| MCI_BF(BLKLEN, data->blksz)));
+	host->dma.req.block_size = data->blksz;
+	host->dma.req.nr_blocks = data->blocks;
+
+	cmd_flags = MCI_BF(TRCMD, MCI_TRCMD_START_TRANS);
+	if (data->flags & MMC_DATA_STREAM)
+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
+	else if (data->blocks > 1)
+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
+	else
+		cmd_flags |= MCI_BF(TRTYP, MCI_TRTYP_BLOCK);
+
+	if (data->flags & MMC_DATA_READ) {
+		cmd_flags |= MCI_BIT(TRDIR);
+		host->dma.req.nr_sg
+			= dma_map_sg(&host->pdev->dev, data->sg,
+				     data->sg_len, DMA_FROM_DEVICE);
+		host->dma.req.periph_id = host->dma.rx_periph_id;
+		host->dma.req.direction = DMA_DIR_PERIPH_TO_MEM;
+		host->dma.req.data_reg = host->mapbase + MCI_RDR;
+	} else {
+		host->dma.req.nr_sg
+			= dma_map_sg(&host->pdev->dev, data->sg,
+				     data->sg_len, DMA_TO_DEVICE);
+		host->dma.req.periph_id = host->dma.tx_periph_id;
+		host->dma.req.direction = DMA_DIR_MEM_TO_PERIPH;
+		host->dma.req.data_reg = host->mapbase + MCI_TDR;
+	}
+	host->dma.req.sg = data->sg;
+
+	dma_prepare_request_sg(host->dma.req.req.dmac, &host->dma.req);
+
+	return cmd_flags;
+}
+
+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+	struct mmc_data *data = mrq->data;
+	u32 iflags;
+	u32 cmdflags = 0;
+
+	iflags = mci_readl(host, IMR);
+	if (iflags)
+		dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
+				mci_readl(host, IMR));
+
+	WARN_ON(host->mrq != NULL);
+
+	/*
+	 * We may "know" the card is gone even though there's still an
+	 * electrical connection. If so, we really need to communicate
+	 * this to the MMC core since there won't be any more
+	 * interrupts as the card is completely removed. Otherwise,
+	 * the MMC core might believe the card is still there even
+	 * though the card was just removed very slowly.
+	 */
+	if (!host->present) {
+		mrq->cmd->error = -ENOMEDIUM;
+		mmc_request_done(mmc, mrq);
+		return;
+	}
+
+	host->mrq = mrq;
+	host->pending_events = 0;
+	host->completed_events = 0;
+
+	iflags = MCI_BIT(CMDRDY);
+	cmdflags = atmci_prepare_command(mmc, mrq->cmd);
+
+	if (mrq->stop) {
+		WARN_ON(!data);
+
+		host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
+		host->stop_cmdr |= MCI_BF(TRCMD, MCI_TRCMD_STOP_TRANS);
+		if (!(data->flags & MMC_DATA_WRITE))
+			host->stop_cmdr |= MCI_BIT(TRDIR);
+		if (data->flags & MMC_DATA_STREAM)
+			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_STREAM);
+		else
+			host->stop_cmdr |= MCI_BF(TRTYP, MCI_TRTYP_MULTI_BLOCK);
+	}
+	if (data) {
+		cmdflags |= atmci_prepare_data(mmc, data);
+		iflags |= MCI_DATA_ERROR_FLAGS;
+	}
+
+	atmci_start_command(host, mrq->cmd, cmdflags);
+	mci_writel(host, IER, iflags);
+}
+
+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+	u32 mr;
+
+	if (ios->clock) {
+		u32 clkdiv;
+
+		/* Set clock rate */
+		clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
+		if (clkdiv > 255) {
+			dev_warn(&mmc->class_dev,
+				"clock %u too slow; using %lu\n",
+				ios->clock, host->bus_hz / (2 * 256));
+			clkdiv = 255;
+		}
+
+		mr = mci_readl(host, MR);
+		mr = MCI_BFINS(CLKDIV, clkdiv, mr)
+			| MCI_BIT(WRPROOF) | MCI_BIT(RDPROOF);
+		mci_writel(host, MR, mr);
+
+		/* Enable the MCI controller */
+		mci_writel(host, CR, MCI_BIT(MCIEN));
+	} else {
+		/* Disable the MCI controller */
+		mci_writel(host, CR, MCI_BIT(MCIDIS));
+	}
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_1:
+		mci_writel(host, SDCR, 0);
+		break;
+	case MMC_BUS_WIDTH_4:
+		mci_writel(host, SDCR, MCI_BIT(SDCBUS));
+		break;
+	}
+
+	switch (ios->power_mode) {
+	case MMC_POWER_ON:
+		/* Send init sequence (74 clock cycles) */
+		mci_writel(host, IDR, ~0UL);
+		mci_writel(host, CMDR, MCI_BF(SPCMD, MCI_SPCMD_INIT_CMD));
+		while (!(mci_readl(host, SR) & MCI_BIT(CMDRDY)))
+			cpu_relax();
+		break;
+	default:
+		/*
+		 * TODO: None of the currently available AVR32-based
+		 * boards allow MMC power to be turned off. Implement
+		 * power control when this can be tested properly.
+		 */
+		break;
+	}
+}
+
+static int atmci_get_ro(struct mmc_host *mmc)
+{
+	int read_only = 0;
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	if (host->wp_pin >= 0) {
+		read_only = gpio_get_value(host->wp_pin);
+		dev_dbg(&mmc->class_dev, "card is %s\n",
+				read_only ? "read-only" : "read-write");
+	} else {
+		dev_dbg(&mmc->class_dev,
+			"no pin for checking read-only switch."
+			" Assuming write-enable.\n");
+	}
+
+	return read_only;
+}
+
+static struct mmc_host_ops atmci_ops = {
+	.request	= atmci_request,
+	.set_ios	= atmci_set_ios,
+	.get_ro		= atmci_get_ro,
+};
+
+static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	WARN_ON(host->cmd || host->data);
+	host->mrq = NULL;
+
+	mmc_request_done(mmc, mrq);
+}
+
+static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data,
+			  u32 flags)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	atmci_start_command(host, data->stop, host->stop_cmdr | flags);
+	mci_writel(host, IER, MCI_BIT(CMDRDY));
+}
+
+static void atmci_data_complete(struct atmel_mci *host, struct mmc_data *data)
+{
+	host->data = NULL;
+	dma_unmap_sg(&host->pdev->dev, data->sg, host->dma.req.nr_sg,
+		     ((data->flags & MMC_DATA_WRITE)
+		      ? DMA_TO_DEVICE : DMA_FROM_DEVICE));
+
+	/*
+	 * Data might complete before command for very short transfers
+	 * (like READ_SCR)
+	 */
+	if (mci_cmd_is_complete(host)
+	    && (!data->stop || mci_stop_is_complete(host)))
+		atmci_request_end(host->mmc, data->mrq);
+}
+
+static void atmci_command_complete(struct atmel_mci *host,
+			struct mmc_command *cmd, u32 status)
+{
+	if (status & MCI_BIT(RTOE))
+		cmd->error = -ETIMEDOUT;
+	else if ((cmd->flags & MMC_RSP_CRC)
+			&& (status & MCI_BIT(RCRCE)))
+		cmd->error = -EILSEQ;
+	else if (status & (MCI_BIT(RINDE) | MCI_BIT(RDIRE) | MCI_BIT(RENDE)))
+		cmd->error = -EIO;
+
+	if (cmd->error) {
+		dev_dbg(&host->mmc->class_dev,
+				"command error: op=0x%x status=0x%08x\n",
+				cmd->opcode, status);
+
+		if (cmd->data) {
+			dma_stop_request(host->dma.req.req.dmac,
+					host->dma.req.req.channel);
+			mci_writel(host, IDR, MCI_BIT(NOTBUSY)
+					| MCI_DATA_ERROR_FLAGS);
+			host->data = NULL;
+		}
+	}
+}
+
+static void atmci_detect_change(unsigned long data)
+{
+	struct atmel_mci *host = (struct atmel_mci *)data;
+	struct mmc_request *mrq = host->mrq;
+	int present;
+
+	/*
+	 * atmci_remove() sets detect_pin to -1 before freeing the
+	 * interrupt. We must not re-enable the interrupt if it has
+	 * been freed.
+	 */
+	smp_rmb();
+	if (host->detect_pin < 0)
+		return;
+
+	enable_irq(gpio_to_irq(host->detect_pin));
+	present = !gpio_get_value(host->detect_pin);
+
+	dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
+			present, host->present);
+
+	if (present != host->present) {
+		dev_dbg(&host->mmc->class_dev, "card %s\n",
+			present ? "inserted" : "removed");
+		host->present = present;
+
+		/* Reset controller if card is gone */
+		if (!present) {
+			mci_writel(host, CR, MCI_BIT(SWRST));
+			mci_writel(host, IDR, ~0UL);
+			mci_writel(host, CR, MCI_BIT(MCIEN));
+		}
+
+		/* Clean up queue if present */
+		if (mrq) {
+			if (!mci_cmd_is_complete(host))
+				mrq->cmd->error = -ENOMEDIUM;
+			if (mrq->data && !mci_data_is_complete(host)
+			    && !mci_data_error_is_complete(host)) {
+				dma_stop_request(host->dma.req.req.dmac,
+						host->dma.req.req.channel);
+				host->data->error = -ENOMEDIUM;
+				atmci_data_complete(host, host->data);
+			}
+			if (mrq->stop && !mci_stop_is_complete(host))
+				mrq->stop->error = -ENOMEDIUM;
+
+			host->cmd = NULL;
+			atmci_request_end(host->mmc, mrq);
+		}
+
+		mmc_detect_change(host->mmc, 0);
+	}
+}
+
+static void atmci_tasklet_func(unsigned long priv)
+{
+	struct mmc_host *mmc = (struct mmc_host *)priv;
+	struct atmel_mci *host = mmc_priv(mmc);
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_data *data = host->data;
+
+	dev_vdbg(&mmc->class_dev,
+		"tasklet: pending/completed/mask %lx/%lx/%x\n",
+		 host->pending_events, host->completed_events,
+		 mci_readl(host, IMR));
+
+	if (mci_clear_cmd_is_pending(host)) {
+		mci_set_cmd_complete(host);
+		atmci_command_complete(host, mrq->cmd, host->cmd_status);
+		if (!host->data || mci_data_is_complete(host)
+		    || mci_data_error_is_complete(host))
+			atmci_request_end(mmc, mrq);
+	}
+	if (mci_clear_stop_is_pending(host)) {
+		mci_set_stop_complete(host);
+		atmci_command_complete(host, mrq->stop, host->stop_status);
+		if (mci_data_is_complete(host)
+		    || mci_data_error_is_complete(host))
+			atmci_request_end(mmc, mrq);
+	}
+	if (mci_clear_dma_error_is_pending(host)) {
+		mci_set_dma_error_complete(host);
+		mci_clear_data_pending(host);
+
+		/* DMA controller got bus error => invalid address */
+		data->error = -EIO;
+
+		dev_dbg(&mmc->class_dev, "dma error after %u bytes xfered\n",
+				host->data->bytes_xfered);
+
+		if (data->stop
+		    && !mci_set_stop_sent_is_completed(host))
+			/* TODO: Check if card is still present */
+			send_stop_cmd(host->mmc, data, 0);
+
+		atmci_data_complete(host, data);
+	}
+	if (mci_clear_data_error_is_pending(host)) {
+		u32 status = host->data_status;
+
+		mci_set_data_error_complete(host);
+		mci_clear_data_pending(host);
+
+		dma_stop_request(host->dma.req.req.dmac,
+				 host->dma.req.req.channel);
+
+		if (status & MCI_BIT(DCRCE)) {
+			dev_dbg(&mmc->class_dev, "data CRC error\n");
+			data->error = -EILSEQ;
+		} else if (status & MCI_BIT(DTOE)) {
+			dev_dbg(&mmc->class_dev, "data timeout error\n");
+			data->error = -ETIMEDOUT;
+		} else {
+			dev_dbg(&mmc->class_dev, "data FIFO error\n");
+			data->error = -EIO;
+		}
+		dev_dbg(&mmc->class_dev, "bytes xfered: %u\n",
+				data->bytes_xfered);
+
+		if (data->stop
+		    && !mci_set_stop_sent_is_completed(host))
+			/* TODO: Check if card is still present */
+			send_stop_cmd(host->mmc, data, 0);
+
+		atmci_data_complete(host, data);
+	}
+	if (mci_clear_data_is_pending(host)) {
+		mci_set_data_complete(host);
+		data->bytes_xfered = data->blocks * data->blksz;
+		atmci_data_complete(host, data);
+	}
+}
+
+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
+{
+	struct atmel_mci *host = mmc_priv(mmc);
+	struct mmc_command *cmd = host->cmd;
+
+	/*
+	 * Read the response now so that we're free to send a new
+	 * command immediately.
+	 */
+	cmd->resp[0] = mci_readl(host, RSPR);
+	cmd->resp[1] = mci_readl(host, RSPR);
+	cmd->resp[2] = mci_readl(host, RSPR);
+	cmd->resp[3] = mci_readl(host, RSPR);
+
+	mci_writel(host, IDR, MCI_BIT(CMDRDY));
+	host->cmd = NULL;
+
+	if (mci_stop_sent_is_complete(host)) {
+		host->stop_status = status;
+		mci_set_stop_pending(host);
+	} else {
+		struct mmc_request *mrq = host->mrq;
+
+		if (mrq->stop && mci_dma_is_complete(host)
+				&& !mci_set_stop_sent_is_completed(host))
+			send_stop_cmd(host->mmc, mrq->data, 0);
+		host->cmd_status = status;
+		mci_set_cmd_pending(host);
+	}
+
+	tasklet_schedule(&host->tasklet);
+}
+
+static void atmci_xfer_complete(struct dma_request *_req)
+{
+	struct dma_request_sg *req = to_dma_request_sg(_req);
+	struct atmel_mci_dma *dma;
+	struct atmel_mci *host;
+	struct mmc_data *data;
+
+	dma = container_of(req, struct atmel_mci_dma, req);
+	host = container_of(dma, struct atmel_mci, dma);
+	data = host->data;
+
+	/*
+	 * This callback may be called before we see the CMDRDY
+	 * interrupt under heavy irq load (possibly caused by other
+	 * drivers) or when interrupts are disabled for a long time.
+	 */
+	mci_set_dma_complete(host);
+	if (data->stop && mci_cmd_is_complete(host)
+			&& !mci_set_stop_sent_is_completed(host))
+		send_stop_cmd(host->mmc, data, 0);
+
+	/*
+	 * Regardless of what the documentation says, we have to wait
+	 * for NOTBUSY even after block read operations.
+	 *
+	 * When the DMA transfer is complete, the controller may still
+	 * be reading the CRC from the card, i.e. the data transfer is
+	 * still in progress and we haven't seen all the potential
+	 * error bits yet.
+	 */
+	mci_writel(host, IER, MCI_BIT(NOTBUSY));
+}
+
+static void atmci_dma_error(struct dma_request *_req)
+{
+	struct dma_request_sg *req = to_dma_request_sg(_req);
+	struct atmel_mci_dma *dma;
+	struct atmel_mci *host;
+
+	dma = container_of(req, struct atmel_mci_dma, req);
+	host = container_of(dma, struct atmel_mci, dma);
+
+	mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
+			       | MCI_DATA_ERROR_FLAGS));
+
+	mci_set_dma_error_pending(host);
+	tasklet_schedule(&host->tasklet);
+}
+
+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+{
+	struct mmc_host *mmc = dev_id;
+	struct atmel_mci *host = mmc_priv(mmc);
+	u32 status, mask, pending;
+
+	spin_lock(&mmc->lock);
+
+	status = mci_readl(host, SR);
+	mask = mci_readl(host, IMR);
+	pending = status & mask;
+
+	do {
+		if (pending & MCI_DATA_ERROR_FLAGS) {
+			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
+					       | MCI_DATA_ERROR_FLAGS));
+			host->data_status = status;
+			mci_set_data_error_pending(host);
+			tasklet_schedule(&host->tasklet);
+			break;
+		}
+		if (pending & MCI_BIT(CMDRDY))
+			atmci_cmd_interrupt(mmc, status);
+		if (pending & MCI_BIT(NOTBUSY)) {
+			mci_writel(host, IDR, (MCI_BIT(NOTBUSY)
+					       | MCI_DATA_ERROR_FLAGS));
+			mci_set_data_pending(host);
+			tasklet_schedule(&host->tasklet);
+		}
+
+		status = mci_readl(host, SR);
+		mask = mci_readl(host, IMR);
+		pending = status & mask;
+	} while (pending);
+
+	spin_unlock(&mmc->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
+{
+	struct mmc_host *mmc = dev_id;
+	struct atmel_mci *host = mmc_priv(mmc);
+
+	/*
+	 * Disable interrupts until the pin has stabilized and check
+	 * the state then. Use mod_timer() since we may be in the
+	 * middle of the timer routine when this interrupt triggers.
+	 */
+	disable_irq_nosync(irq);
+	mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit atmci_probe(struct platform_device *pdev)
+{
+	struct mci_platform_data *board;
+	struct atmel_mci *host;
+	struct mmc_host *mmc;
+	struct resource *regs;
+	int irq;
+	int ret;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	board = pdev->dev.platform_data;
+
+	mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
+	if (!mmc)
+		return -ENOMEM;
+
+	host = mmc_priv(mmc);
+	host->pdev = pdev;
+	host->mmc = mmc;
+	if (board) {
+		host->detect_pin = board->detect_pin;
+		host->wp_pin = board->wp_pin;
+	} else {
+		host->detect_pin = -1;
+		host->wp_pin = -1;
+	}
+
+	host->mck = clk_get(&pdev->dev, "mci_clk");
+	if (IS_ERR(host->mck)) {
+		ret = PTR_ERR(host->mck);
+		goto out_free_host;
+	}
+	clk_enable(host->mck);
+
+	ret = -ENOMEM;
+	host->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!host->regs)
+		goto out_disable_clk;
+
+	host->bus_hz = clk_get_rate(host->mck);
+	host->mapbase = regs->start;
+
+	mmc->ops = &atmci_ops;
+	mmc->f_min = (host->bus_hz + 511) / 512;
+	mmc->f_max = min((unsigned int)(host->bus_hz / 2), fmax);
+	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
+
+	ret = request_irq(irq, atmci_interrupt, 0, "mmci", mmc);
+	if (ret)
+		goto out_unmap;
+
+	/* Assume card is present if we don't have a detect pin */
+	host->present = 1;
+	if (host->detect_pin >= 0) {
+		if (gpio_request(host->detect_pin, "mmc_detect")) {
+			dev_dbg(&mmc->class_dev, "no detect pin available\n");
+			host->detect_pin = -1;
+		} else {
+			host->present = !gpio_get_value(host->detect_pin);
+		}
+	}
+	if (host->wp_pin >= 0) {
+		if (gpio_request(host->wp_pin, "mmc_wp")) {
+			dev_dbg(&mmc->class_dev, "no WP pin available\n");
+			host->wp_pin = -1;
+		}
+	}
+
+	/* TODO: Get this information from platform data */
+	ret = -ENOMEM;
+	host->dma.req.req.dmac = find_dma_controller(0);
+	if (!host->dma.req.req.dmac) {
+		dev_dbg(&mmc->class_dev, "no DMA controller available\n");
+		goto out_free_irq;
+	}
+	ret = dma_alloc_channel(host->dma.req.req.dmac);
+	if (ret < 0) {
+		dev_dbg(&mmc->class_dev, "unable to allocate DMA channel\n");
+		goto out_free_irq;
+	}
+	host->dma.req.req.channel = ret;
+	host->dma.req.width = DMA_WIDTH_32BIT;
+	host->dma.req.req.xfer_complete = atmci_xfer_complete;
+	host->dma.req.req.block_complete = NULL; // atmci_block_complete;
+	host->dma.req.req.error = atmci_dma_error;
+	host->dma.rx_periph_id = 0;
+	host->dma.tx_periph_id = 1;
+
+	mci_writel(host, CR, MCI_BIT(SWRST));
+	mci_writel(host, IDR, ~0UL);
+
+	platform_set_drvdata(pdev, host);
+
+	mmc_add_host(mmc);
+
+	if (host->detect_pin >= 0) {
+		setup_timer(&host->detect_timer, atmci_detect_change,
+				(unsigned long)host);
+
+		ret = request_irq(gpio_to_irq(host->detect_pin),
+				  atmci_detect_interrupt,
+				  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+				  DRIVER_NAME, mmc);
+		if (ret) {
+			dev_dbg(&mmc->class_dev,
+				"could not request IRQ %d for detect pin\n",
+				gpio_to_irq(host->detect_pin));
+			gpio_free(host->detect_pin);
+			host->detect_pin = -1;
+		}
+	}
+
+	dev_info(&mmc->class_dev, "Atmel MCI controller at 0x%08lx irq %d\n",
+			host->mapbase, irq);
+
+	atmci_init_debugfs(host);
+
+	return 0;
+
+out_free_irq:
+	if (host->detect_pin >= 0)
+		gpio_free(host->detect_pin);
+	if (host->wp_pin >= 0)
+		gpio_free(host->wp_pin);
+	free_irq(irq, mmc);
+out_unmap:
+	iounmap(host->regs);
+out_disable_clk:
+	clk_disable(host->mck);
+	clk_put(host->mck);
+out_free_host:
+	mmc_free_host(mmc);
+	return ret;
+}
+
+static int __devexit atmci_remove(struct platform_device *pdev)
+{
+	struct atmel_mci *host = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (host) {
+		atmci_cleanup_debugfs(host);
+
+		if (host->detect_pin >= 0) {
+			int pin = host->detect_pin;
+
+			/* Make sure our timer doesn't enable the interrupt */
+			host->detect_pin = -1;
+			smp_wmb();
+
+			free_irq(gpio_to_irq(pin), host->mmc);
+			del_timer_sync(&host->detect_timer);
+			cancel_delayed_work(&host->mmc->detect);
+			gpio_free(pin);
+		}
+
+		mmc_remove_host(host->mmc);
+
+		mci_writel(host, IDR, ~0UL);
+		mci_writel(host, CR, MCI_BIT(MCIDIS));
+		mci_readl(host, SR);
+
+		dma_release_channel(host->dma.req.req.dmac,
+				    host->dma.req.req.channel);
+
+		if (host->wp_pin >= 0)
+			gpio_free(host->wp_pin);
+
+		free_irq(platform_get_irq(pdev, 0), host->mmc);
+		iounmap(host->regs);
+
+		clk_disable(host->mck);
+		clk_put(host->mck);
+
+		mmc_free_host(host->mmc);
+	}
+	return 0;
+}
+
+static struct platform_driver atmci_driver = {
+	.probe		= atmci_probe,
+	.remove		= __devexit_p(atmci_remove),
+	.driver		= {
+		.name		= DRIVER_NAME,
+	},
+};
+
+static int __init atmci_init(void)
+{
+	return platform_driver_register(&atmci_driver);
+}
+
+static void __exit atmci_exit(void)
+{
+	platform_driver_unregister(&atmci_driver);
+}
+
+module_init(atmci_init);
+module_exit(atmci_exit);
+
+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.24.3/drivers/mmc/host/atmel-mci.h avr32-2.6/drivers/mmc/host/atmel-mci.h
--- linux-2.6.24.3/drivers/mmc/host/atmel-mci.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/mmc/host/atmel-mci.h	2008-04-23 19:33:40.000000000 +0200
@@ -0,0 +1,192 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
+#define __DRIVERS_MMC_ATMEL_MCI_H__
+
+/* MCI register offsets */
+#define MCI_CR					0x0000
+#define MCI_MR					0x0004
+#define MCI_DTOR				0x0008
+#define MCI_SDCR				0x000c
+#define MCI_ARGR				0x0010
+#define MCI_CMDR				0x0014
+#define MCI_BLKR				0x0018
+#define MCI_RSPR				0x0020
+#define MCI_RSPR1				0x0024
+#define MCI_RSPR2				0x0028
+#define MCI_RSPR3				0x002c
+#define MCI_RDR					0x0030
+#define MCI_TDR					0x0034
+#define MCI_SR					0x0040
+#define MCI_IER					0x0044
+#define MCI_IDR					0x0048
+#define MCI_IMR					0x004c
+
+/* Bitfields in CR */
+#define MCI_MCIEN_OFFSET			0
+#define MCI_MCIEN_SIZE				1
+#define MCI_MCIDIS_OFFSET			1
+#define MCI_MCIDIS_SIZE				1
+#define MCI_PWSEN_OFFSET			2
+#define MCI_PWSEN_SIZE				1
+#define MCI_PWSDIS_OFFSET			3
+#define MCI_PWSDIS_SIZE				1
+#define MCI_SWRST_OFFSET			7
+#define MCI_SWRST_SIZE				1
+
+/* Bitfields in MR */
+#define MCI_CLKDIV_OFFSET			0
+#define MCI_CLKDIV_SIZE				8
+#define MCI_PWSDIV_OFFSET			8
+#define MCI_PWSDIV_SIZE				3
+#define MCI_RDPROOF_OFFSET			11
+#define MCI_RDPROOF_SIZE			1
+#define MCI_WRPROOF_OFFSET			12
+#define MCI_WRPROOF_SIZE			1
+#define MCI_DMAPADV_OFFSET			14
+#define MCI_DMAPADV_SIZE			1
+#define MCI_BLKLEN_OFFSET			16
+#define MCI_BLKLEN_SIZE				16
+
+/* Bitfields in DTOR */
+#define MCI_DTOCYC_OFFSET			0
+#define MCI_DTOCYC_SIZE				4
+#define MCI_DTOMUL_OFFSET			4
+#define MCI_DTOMUL_SIZE				3
+
+/* Bitfields in SDCR */
+#define MCI_SDCSEL_OFFSET			0
+#define MCI_SDCSEL_SIZE				4
+#define MCI_SDCBUS_OFFSET			7
+#define MCI_SDCBUS_SIZE				1
+
+/* Bitfields in ARGR */
+#define MCI_ARG_OFFSET				0
+#define MCI_ARG_SIZE				32
+
+/* Bitfields in CMDR */
+#define MCI_CMDNB_OFFSET			0
+#define MCI_CMDNB_SIZE				6
+#define MCI_RSPTYP_OFFSET			6
+#define MCI_RSPTYP_SIZE				2
+#define MCI_SPCMD_OFFSET			8
+#define MCI_SPCMD_SIZE				3
+#define MCI_OPDCMD_OFFSET			11
+#define MCI_OPDCMD_SIZE				1
+#define MCI_MAXLAT_OFFSET			12
+#define MCI_MAXLAT_SIZE				1
+#define MCI_TRCMD_OFFSET			16
+#define MCI_TRCMD_SIZE				2
+#define MCI_TRDIR_OFFSET			18
+#define MCI_TRDIR_SIZE				1
+#define MCI_TRTYP_OFFSET			19
+#define MCI_TRTYP_SIZE				2
+
+/* Bitfields in BLKR */
+#define MCI_BCNT_OFFSET				0
+#define MCI_BCNT_SIZE				16
+
+/* Bitfields in RSPRn */
+#define MCI_RSP_OFFSET				0
+#define MCI_RSP_SIZE				32
+
+/* Bitfields in SR/IER/IDR/IMR */
+#define MCI_CMDRDY_OFFSET			0
+#define MCI_CMDRDY_SIZE				1
+#define MCI_RXRDY_OFFSET			1
+#define MCI_RXRDY_SIZE				1
+#define MCI_TXRDY_OFFSET			2
+#define MCI_TXRDY_SIZE				1
+#define MCI_BLKE_OFFSET				3
+#define MCI_BLKE_SIZE				1
+#define MCI_DTIP_OFFSET				4
+#define MCI_DTIP_SIZE				1
+#define MCI_NOTBUSY_OFFSET			5
+#define MCI_NOTBUSY_SIZE			1
+#define MCI_ENDRX_OFFSET			6
+#define MCI_ENDRX_SIZE				1
+#define MCI_ENDTX_OFFSET			7
+#define MCI_ENDTX_SIZE				1
+#define MCI_RXBUFF_OFFSET			14
+#define MCI_RXBUFF_SIZE				1
+#define MCI_TXBUFE_OFFSET			15
+#define MCI_TXBUFE_SIZE				1
+#define MCI_RINDE_OFFSET			16
+#define MCI_RINDE_SIZE				1
+#define MCI_RDIRE_OFFSET			17
+#define MCI_RDIRE_SIZE				1
+#define MCI_RCRCE_OFFSET			18
+#define MCI_RCRCE_SIZE				1
+#define MCI_RENDE_OFFSET			19
+#define MCI_RENDE_SIZE				1
+#define MCI_RTOE_OFFSET				20
+#define MCI_RTOE_SIZE				1
+#define MCI_DCRCE_OFFSET			21
+#define MCI_DCRCE_SIZE				1
+#define MCI_DTOE_OFFSET				22
+#define MCI_DTOE_SIZE				1
+#define MCI_OVRE_OFFSET				30
+#define MCI_OVRE_SIZE				1
+#define MCI_UNRE_OFFSET				31
+#define MCI_UNRE_SIZE				1
+
+/* Constants for DTOMUL */
+#define MCI_DTOMUL_1_CYCLE			0
+#define MCI_DTOMUL_16_CYCLES			1
+#define MCI_DTOMUL_128_CYCLES			2
+#define MCI_DTOMUL_256_CYCLES			3
+#define MCI_DTOMUL_1024_CYCLES			4
+#define MCI_DTOMUL_4096_CYCLES			5
+#define MCI_DTOMUL_65536_CYCLES			6
+#define MCI_DTOMUL_1048576_CYCLES		7
+
+/* Constants for RSPTYP */
+#define MCI_RSPTYP_NO_RESP			0
+#define MCI_RSPTYP_48_BIT			1
+#define MCI_RSPTYP_136_BIT			2
+
+/* Constants for SPCMD */
+#define MCI_SPCMD_NO_SPEC_CMD			0
+#define MCI_SPCMD_INIT_CMD			1
+#define MCI_SPCMD_SYNC_CMD			2
+#define MCI_SPCMD_INT_CMD			4
+#define MCI_SPCMD_INT_RESP			5
+
+/* Constants for TRCMD */
+#define MCI_TRCMD_NO_TRANS			0
+#define MCI_TRCMD_START_TRANS			1
+#define MCI_TRCMD_STOP_TRANS			2
+
+/* Constants for TRTYP */
+#define MCI_TRTYP_BLOCK				0
+#define MCI_TRTYP_MULTI_BLOCK			1
+#define MCI_TRTYP_STREAM			2
+
+/* Bit manipulation macros */
+#define MCI_BIT(name)					\
+	(1 << MCI_##name##_OFFSET)
+#define MCI_BF(name,value)				\
+	(((value) & ((1 << MCI_##name##_SIZE) - 1))	\
+	 << MCI_##name##_OFFSET)
+#define MCI_BFEXT(name,value)				\
+	(((value) >> MCI_##name##_OFFSET)		\
+	 & ((1 << MCI_##name##_SIZE) - 1))
+#define MCI_BFINS(name,value,old)			\
+	(((old) & ~(((1 << MCI_##name##_SIZE) - 1)	\
+		    << MCI_##name##_OFFSET))		\
+	 | MCI_BF(name,value))
+
+/* Register access macros */
+#define mci_readl(port,reg)				\
+	__raw_readl((port)->regs + MCI_##reg)
+#define mci_writel(port,reg,value)			\
+	__raw_writel((value), (port)->regs + MCI_##reg)
+
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff -urN linux-2.6.24.3/drivers/mmc/host/Kconfig avr32-2.6/drivers/mmc/host/Kconfig
--- linux-2.6.24.3/drivers/mmc/host/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/mmc/host/Kconfig	2008-04-23 19:33:40.000000000 +0200
@@ -91,6 +91,16 @@
 
 	  If unsure, say N.
 
+config MMC_ATMELMCI
+	tristate "Atmel Multimedia Card Interface support"
+	depends on AVR32 && MMC
+	help
+	  This selects the Atmel Multimedia Card Interface. If you have
+	  a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
+	  slot, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_IMX
 	tristate "Motorola i.MX Multimedia Card Interface support"
 	depends on ARCH_IMX
diff -urN linux-2.6.24.3/drivers/mmc/host/Makefile avr32-2.6/drivers/mmc/host/Makefile
--- linux-2.6.24.3/drivers/mmc/host/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/mmc/host/Makefile	2008-04-23 19:33:40.000000000 +0200
@@ -15,6 +15,7 @@
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
 obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
+obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 obj-$(CONFIG_MMC_SPI)		+= mmc_spi.o
 
diff -urN linux-2.6.24.3/drivers/mtd/chips/cfi_cmdset_0001.c avr32-2.6/drivers/mtd/chips/cfi_cmdset_0001.c
--- linux-2.6.24.3/drivers/mtd/chips/cfi_cmdset_0001.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/mtd/chips/cfi_cmdset_0001.c	2008-04-23 20:12:41.000000000 +0200
@@ -50,6 +50,7 @@
 #define I82802AC	0x00ac
 #define MANUFACTURER_ST         0x0020
 #define M50LPW080       0x002F
+#define AT49BV640D	0x02de
 
 static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
 static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -157,6 +158,47 @@
 }
 #endif
 
+/* Atmel chips don't use the same PRI format as Intel chips */
+static void fixup_convert_atmel_pri(struct mtd_info *mtd, void *param)
+{
+	struct map_info *map = mtd->priv;
+	struct cfi_private *cfi = map->fldrv_priv;
+	struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+	struct cfi_pri_atmel atmel_pri;
+	uint32_t features = 0;
+
+	/* Reverse byteswapping */
+	extp->FeatureSupport = cpu_to_le32(extp->FeatureSupport);
+	extp->BlkStatusRegMask = cpu_to_le16(extp->BlkStatusRegMask);
+	extp->ProtRegAddr = cpu_to_le16(extp->ProtRegAddr);
+
+	memcpy(&atmel_pri, extp, sizeof(atmel_pri));
+	memset((char *)extp + 5, 0, sizeof(*extp) - 5);
+
+	printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
+
+	if (atmel_pri.Features & 0x01) /* chip erase supported */
+		features |= (1<<0);
+	if (atmel_pri.Features & 0x02) /* erase suspend supported */
+		features |= (1<<1);
+	if (atmel_pri.Features & 0x04) /* program suspend supported */
+		features |= (1<<2);
+	if (atmel_pri.Features & 0x08) /* simultaneous operations supported */
+		features |= (1<<9);
+	if (atmel_pri.Features & 0x20) /* page mode read supported */
+		features |= (1<<7);
+	if (atmel_pri.Features & 0x40) /* queued erase supported */
+		features |= (1<<4);
+	if (atmel_pri.Features & 0x80) /* Protection bits supported */
+		features |= (1<<6);
+
+	extp->FeatureSupport = features;
+
+	/* burst write mode not supported */
+	cfi->cfiq->BufWriteTimeoutTyp = 0;
+	cfi->cfiq->BufWriteTimeoutMax = 0;
+}
+
 #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
 /* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
 static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
@@ -234,6 +276,7 @@
 }
 
 static struct cfi_fixup cfi_fixup_table[] = {
+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
 #ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
 #endif
diff -urN linux-2.6.24.3/drivers/mtd/chips/cfi_cmdset_0002.c avr32-2.6/drivers/mtd/chips/cfi_cmdset_0002.c
--- linux-2.6.24.3/drivers/mtd/chips/cfi_cmdset_0002.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/mtd/chips/cfi_cmdset_0002.c	2008-04-23 20:12:41.000000000 +0200
@@ -185,6 +185,10 @@
 		extp->TopBottom = 2;
 	else
 		extp->TopBottom = 3;
+
+	/* burst write mode not supported */
+	cfi->cfiq->BufWriteTimeoutTyp = 0;
+	cfi->cfiq->BufWriteTimeoutMax = 0;
 }
 
 static void fixup_use_secsi(struct mtd_info *mtd, void *param)
@@ -217,6 +221,7 @@
 }
 
 static struct cfi_fixup cfi_fixup_table[] = {
+	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
 #ifdef AMD_BOOTLOC_BUG
 	{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
 #endif
@@ -229,7 +234,6 @@
 #if !FORCE_WORD_WRITE
 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
 #endif
-	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
 	{ 0, 0, NULL, NULL }
 };
 static struct cfi_fixup jedec_fixup_table[] = {
diff -urN linux-2.6.24.3/drivers/pcmcia/at32_cf.c avr32-2.6/drivers/pcmcia/at32_cf.c
--- linux-2.6.24.3/drivers/pcmcia/at32_cf.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/drivers/pcmcia/at32_cf.c	2008-04-23 19:33:42.000000000 +0200
@@ -0,0 +1,533 @@
+/*
+ * Driver for AVR32 Static Memory Controller: CompactFlash support
+ *
+ * Copyright (C) 2006 Atmel Norway
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ * 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this
+ * distribution in the file called COPYING.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/board.h>
+
+#include <asm/arch/smc.h>
+
+struct at32_cf_socket {
+	struct pcmcia_socket	socket;
+	int			detect_pin;
+	int			reset_pin;
+	int			vcc_pin;
+	int			ready_pin;
+	struct resource		res_attr;
+	struct resource		res_mem;
+	struct resource		res_io;
+	struct smc_config	smc;
+	unsigned int		irq;
+	unsigned int		cf_cs;
+	socket_state_t		state;
+	unsigned		present:1;
+};
+#define to_at32_cf(sock) container_of(sock, struct at32_cf_socket, socket)
+
+/*
+ * We have the following memory layout relative to the base address:
+ *
+ *   Alt IDE Mode:      00e0 0000 -> 00ff ffff
+ *   True IDE Mode:     00c0 0000 -> 00df ffff
+ *   I/O memory:        0080 0000 -> 00bf ffff
+ *   Common memory:     0040 0000 -> 007f ffff
+ *   Attribute memory:  0000 0000 -> 003f ffff
+ */
+#define CF_ATTR_OFFSET	0x00000000
+#define CF_MEM_OFFSET	0x00400000
+#define CF_IO_OFFSET	0x00800000
+#define CF_RES_SIZE	4096
+
+#ifdef DEBUG
+
+static int pc_debug;
+module_param(pc_debug, int, 0644);
+
+static void at32_cf_debug(struct at32_cf_socket *cf, const char *func,
+			  int level, const char *fmt, ...)
+{
+	va_list args;
+
+	if (pc_debug > level) {
+		printk(KERN_DEBUG "at32_cf/%u: %s: ", cf->cf_cs, func);
+		va_start(args, fmt);
+		vprintk(fmt, args);
+		va_end(args);
+	}
+}
+
+#define debug(cf, lvl, fmt, arg...)			\
+	at32_cf_debug(cf, __func__, lvl, fmt, ##arg)
+
+#else
+#define debug(cf, lvl, fmt, arg...) do { } while (0)
+#endif
+
+static inline int at32_cf_present(struct at32_cf_socket *cf)
+{
+	int present = 1;
+
+	/* If we don't have a detect pin, assume the card is present */
+	if (cf->detect_pin >= 0)
+		present = !gpio_get_value(cf->detect_pin);
+
+	return present;
+}
+
+static irqreturn_t at32_cf_irq(int irq, void *dev_id)
+{
+	struct at32_cf_socket *cf = dev_id;
+	unsigned int present;
+
+	present = at32_cf_present(cf);
+	if (present != cf->present) {
+		cf->present = present;
+		debug(cf, 3, "card %s\n", present ? "present" : "gone");
+		pcmcia_parse_events(&cf->socket, SS_DETECT);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int at32_cf_get_status(struct pcmcia_socket *sock, u_int *value)
+{
+	struct at32_cf_socket *cf;
+	u_int status = 0;
+
+	cf = container_of(sock, struct at32_cf_socket, socket);
+
+	if (at32_cf_present(cf)) {
+		/* NOTE: gpio on AP7xxx is 3.3V */
+		status = SS_DETECT | SS_3VCARD;
+		if (cf->ready_pin < 0 || gpio_get_value(cf->ready_pin))
+			status |= SS_READY;
+		if (cf->vcc_pin < 0 || gpio_get_value(cf->vcc_pin))
+			status |= SS_POWERON;
+	}
+
+	*value = status;
+	return 0;
+}
+
+static int at32_cf_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
+{
+	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
+
+	debug(cf, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
+			(state->csc_mask==0)?"<NONE> ":"",
+			(state->csc_mask&SS_DETECT)?"DETECT ":"",
+			(state->csc_mask&SS_READY)?"READY ":"",
+			(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
+			(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
+			(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
+			(state->flags==0)?"<NONE> ":"",
+			(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
+			(state->flags&SS_IOCARD)?"IOCARD ":"",
+			(state->flags&SS_RESET)?"RESET ":"",
+			(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
+			(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
+			state->Vcc, state->Vpp, state->io_irq);
+
+	/*
+	 * TODO: Allow boards to override this in case they have level
+	 * converters.
+	 */
+	switch (state->Vcc) {
+	case 0:
+		if (cf->vcc_pin >= 0)
+			gpio_set_value(cf->vcc_pin, 0);
+		break;
+	case 33:
+		if (cf->vcc_pin >= 0)
+			gpio_set_value(cf->vcc_pin, 1);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (cf->reset_pin >= 0)
+		gpio_set_value(cf->reset_pin, state->flags & SS_RESET);
+
+	cf->state = *state;
+
+	return 0;
+}
+
+static int at32_cf_socket_init(struct pcmcia_socket *sock)
+{
+	debug(to_at32_cf(sock), 2, "called\n");
+
+	return 0;
+}
+
+static int at32_cf_suspend(struct pcmcia_socket *sock)
+{
+	debug(to_at32_cf(sock), 2, "called\n");
+
+	at32_cf_set_socket(sock, &dead_socket);
+
+	return 0;
+}
+
+static int at32_cf_set_io_map(struct pcmcia_socket *sock,
+			      struct pccard_io_map *map)
+{
+	struct at32_cf_socket *cf = container_of(sock, struct at32_cf_socket, socket);
+	int retval;
+
+	debug(cf, 2, "map %u  speed %u start 0x%08x stop 0x%08x\n",
+		map->map, map->speed, map->start, map->stop);
+	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
+		(map->flags == 0) ? "<NONE>":"",
+		(map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
+		(map->flags & MAP_16BIT) ? "16BIT " : "",
+		(map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
+		(map->flags & MAP_0WS) ? "0WS " : "",
+		(map->flags & MAP_WRPROT) ? "WRPROT " : "",
+		(map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
+		(map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
+
+	map->flags &= MAP_ACTIVE | MAP_16BIT | MAP_USE_WAIT;
+
+	if (map->flags & MAP_16BIT)
+		cf->smc.bus_width = 2;
+	else
+		cf->smc.bus_width = 1;
+
+	if (map->flags & MAP_USE_WAIT)
+		cf->smc.nwait_mode = 3;
+	else
+		cf->smc.nwait_mode = 0;
+
+	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
+	if (retval) {
+		printk(KERN_ERR "at32_cf: could not set up SMC for I/O\n");
+		return retval;
+	}
+
+	map->start = cf->socket.io_offset;
+	map->stop = map->start + CF_RES_SIZE - 1;
+
+	return 0;
+}
+
+static int
+at32_cf_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
+{
+	struct at32_cf_socket *cf;
+	struct resource *res;
+	int retval;
+
+	cf = container_of(sock, struct at32_cf_socket, socket);
+
+	debug(cf, 2, "map %u speed %u card_start %08x\n",
+		map->map, map->speed, map->card_start);
+	debug(cf, 2, "flags: %s%s%s%s%s%s%s%s\n",
+		(map->flags==0)?"<NONE>":"",
+		(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
+		(map->flags&MAP_16BIT)?"16BIT ":"",
+		(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
+		(map->flags&MAP_0WS)?"0WS ":"",
+		(map->flags&MAP_WRPROT)?"WRPROT ":"",
+		(map->flags&MAP_ATTRIB)?"ATTRIB ":"",
+		(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
+
+	if (map->card_start)
+		return -EINVAL;
+
+	map->flags &= MAP_ACTIVE | MAP_ATTRIB | MAP_16BIT | MAP_USE_WAIT;
+
+	if (map->flags & MAP_ATTRIB) {
+		res = &cf->res_attr;
+
+		/* Linksys WCF12 seems to use WAIT when reading CIS */
+		map->flags |= MAP_USE_WAIT;
+	} else {
+		res = &cf->res_mem;
+	}
+
+	if (map->flags & MAP_USE_WAIT)
+		cf->smc.nwait_mode = 3;
+	else
+		cf->smc.nwait_mode = 0;
+
+	retval = smc_set_configuration(cf->cf_cs, &cf->smc);
+	if (retval) {
+		printk(KERN_ERR "at32_cf: could not set up SMC for mem\n");
+		return retval;
+	}
+
+	map->static_start = res->start;
+
+	return 0;
+}
+
+static struct pccard_operations at32_cf_ops = {
+	.init			= at32_cf_socket_init,
+	.suspend		= at32_cf_suspend,
+	.get_status		= at32_cf_get_status,
+	.set_socket		= at32_cf_set_socket,
+	.set_io_map		= at32_cf_set_io_map,
+	.set_mem_map		= at32_cf_set_mem_map,
+};
+
+static int __init request_pin(struct platform_device *pdev,
+			      unsigned int pin, const char *name)
+{
+	if (gpio_request(pin, name)) {
+		dev_warn(&pdev->dev, "failed to request %s pin\n", name);
+		return -1;
+	}
+
+	return pin;
+}
+
+static struct smc_timing at32_cf_timing __initdata = {
+	.ncs_read_setup		= 30,
+	.nrd_setup		= 100,
+	.ncs_write_setup	= 30,
+	.nwe_setup		= 100,
+
+	.ncs_read_pulse		= 360,
+	.nrd_pulse		= 290,
+	.ncs_write_pulse	= 360,
+	.nwe_pulse		= 290,
+
+	.read_cycle		= 420,
+	.write_cycle		= 420,
+};
+
+static int __init at32_cf_probe(struct platform_device *pdev)
+{
+	struct at32_cf_socket	*cf;
+	struct cf_platform_data	*board = pdev->dev.platform_data;
+	struct resource		*res_skt;
+	int			irq;
+	int			ret;
+
+	dev_dbg(&pdev->dev, "probe");
+
+	if (!board)
+		return -ENXIO;
+
+	res_skt = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res_skt)
+		return -ENXIO;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	cf = kzalloc(sizeof(struct at32_cf_socket), GFP_KERNEL);
+	if (!cf)
+		return -ENOMEM;
+
+	cf->detect_pin = -1;
+	cf->reset_pin = -1;
+	cf->vcc_pin = -1;
+	cf->ready_pin = -1;
+	cf->cf_cs = board->cs;
+
+	if (board->detect_pin != GPIO_PIN_NONE)
+		cf->detect_pin = request_pin(pdev, board->detect_pin,
+					     "cf_detect");
+	if (board->reset_pin != GPIO_PIN_NONE)
+		cf->reset_pin = request_pin(pdev, board->reset_pin,
+					    "cf_reset");
+	if (board->vcc_pin != GPIO_PIN_NONE)
+		cf->vcc_pin = request_pin(pdev, board->vcc_pin,
+					  "cf_vcc");
+	if (board->ready_pin != GPIO_PIN_NONE)
+		/* READY is also used for irq through EIM */
+		cf->ready_pin = board->ready_pin;
+
+	debug(cf, 2, "pins: detect=%d reset=%d vcc=%d\n",
+	      cf->detect_pin, cf->reset_pin, cf->vcc_pin);
+
+	cf->socket.pci_irq = irq;
+	cf->socket.ops = &at32_cf_ops;
+	cf->socket.resource_ops = &pccard_static_ops;
+	cf->socket.dev.parent = &pdev->dev;
+	cf->socket.owner = THIS_MODULE;
+	cf->socket.features =
+		SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+	cf->socket.map_size = CF_RES_SIZE;
+
+	cf->res_attr.start = res_skt->start + CF_ATTR_OFFSET;
+	cf->res_attr.end = cf->res_attr.start + CF_RES_SIZE - 1;
+	cf->res_attr.name = "attribute";
+	cf->res_attr.flags = IORESOURCE_MEM;
+	ret = request_resource(res_skt, &cf->res_attr);
+	if (ret)
+		goto err_request_res_attr;
+
+	cf->res_mem.start = res_skt->start + CF_MEM_OFFSET;
+	cf->res_mem.end = cf->res_mem.start + CF_RES_SIZE - 1;
+	cf->res_mem.name = "memory";
+	cf->res_mem.flags = IORESOURCE_MEM;
+	ret = request_resource(res_skt, &cf->res_mem);
+	if (ret)
+		goto err_request_res_mem;
+
+	cf->res_io.start = res_skt->start + CF_IO_OFFSET;
+	cf->res_io.end = cf->res_io.start + CF_RES_SIZE - 1;
+	cf->res_io.name = "io";
+	cf->res_io.flags = IORESOURCE_MEM;
+	ret = request_resource(res_skt, &cf->res_io);
+	if (ret)
+		goto err_request_res_io;
+
+	cf->socket.io_offset = cf->res_io.start;
+
+	if (cf->detect_pin >= 0) {
+		ret = request_irq(gpio_to_irq(cf->detect_pin), at32_cf_irq,
+				  IRQF_SHARED, "cf_detect", cf);
+		if (ret) {
+			debug(cf, 1,
+			      "failed to request cf_detect interrupt\n");
+			goto err_detect_irq;
+		}
+	}
+
+	cf->present = at32_cf_present(cf);
+
+	/* Setup SMC timings */
+	smc_set_timing(&cf->smc, &at32_cf_timing);
+
+	cf->smc.bus_width = 2;
+	cf->smc.nrd_controlled = 1;
+	cf->smc.nwe_controlled = 1;
+	cf->smc.nwait_mode = 0;
+	cf->smc.byte_write = 0;
+	cf->smc.tdf_cycles = 8;
+	cf->smc.tdf_mode = 0;
+
+	ret = smc_set_configuration(cf->cf_cs, &cf->smc);
+	if (ret) {
+		debug(cf, 1, "failed to configure SMC\n", ret);
+		goto err_smc;
+	}
+
+	ret = pcmcia_register_socket(&cf->socket);
+	if (ret) {
+		debug(cf, 1, "failed to register socket: %d\n", ret);
+		goto err_register_socket;
+	}
+
+	if (cf->reset_pin >= 0)
+		gpio_direction_output(cf->reset_pin, 0);
+
+	platform_set_drvdata(pdev, cf);
+
+	dev_info(&pdev->dev, "Atmel SMC CF interface at 0x%08lx\n",
+		 (unsigned long)res_skt->start);
+
+	return 0;
+
+err_register_socket:
+err_smc:
+	if (cf->detect_pin >= 0)
+		free_irq(gpio_to_irq(cf->detect_pin), cf);
+err_detect_irq:
+	release_resource(&cf->res_io);
+err_request_res_io:
+	release_resource(&cf->res_mem);
+err_request_res_mem:
+	release_resource(&cf->res_attr);
+err_request_res_attr:
+	if (cf->vcc_pin >= 0)
+		gpio_free(cf->vcc_pin);
+	if (cf->reset_pin >= 0)
+		gpio_free(cf->reset_pin);
+	if (cf->detect_pin >= 0)
+		gpio_free(cf->detect_pin);
+	kfree(cf);
+
+	return ret;
+}
+
+static int __exit at32_cf_remove(struct platform_device *pdev)
+{
+	struct at32_cf_socket *cf = platform_get_drvdata(pdev);
+
+	pcmcia_unregister_socket(&cf->socket);
+	if (cf->detect_pin >= 0) {
+		free_irq(gpio_to_irq(cf->detect_pin), cf);
+		gpio_free(cf->detect_pin);
+	}
+	if (cf->vcc_pin >= 0)
+		gpio_free(cf->vcc_pin);
+	if (cf->reset_pin >= 0)
+		gpio_free(cf->reset_pin);
+
+	release_resource(&cf->res_io);
+	release_resource(&cf->res_mem);
+	release_resource(&cf->res_attr);
+	kfree(cf);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver at32_cf_driver = {
+	.remove		= __exit_p(at32_cf_remove),
+	.driver		= {
+		.name	= "at32_cf",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init at32_cf_init(void)
+{
+	int ret;
+
+	ret = platform_driver_probe(&at32_cf_driver, at32_cf_probe);
+	if (ret)
+		printk(KERN_ERR "at32_cf: probe failed: %d\n", ret);
+	return ret;
+}
+
+static void __exit at32_cf_exit(void)
+{
+	platform_driver_unregister(&at32_cf_driver);
+}
+
+module_init(at32_cf_init);
+module_exit(at32_cf_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
diff -urN linux-2.6.24.3/drivers/pcmcia/Kconfig avr32-2.6/drivers/pcmcia/Kconfig
--- linux-2.6.24.3/drivers/pcmcia/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/pcmcia/Kconfig	2008-04-23 19:33:42.000000000 +0200
@@ -276,6 +276,13 @@
 	  Say Y here to support the CompactFlash controller on the
 	  PA Semi Electra eval board.
 
+config AT32_CF
+	tristate "AT32AP CompactFlash Controller"
+	depends on PCMCIA && AVR32 && PLATFORM_AT32AP
+	help
+	  Say Y here to support the CompactFlash controller on AT32 chips.
+	  Or choose M to compile the driver as a module named "at32_cf".
+
 config PCCARD_NONSTATIC
 	tristate
 
diff -urN linux-2.6.24.3/drivers/pcmcia/Makefile avr32-2.6/drivers/pcmcia/Makefile
--- linux-2.6.24.3/drivers/pcmcia/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/pcmcia/Makefile	2008-04-23 19:33:42.000000000 +0200
@@ -38,6 +38,7 @@
 obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
 obj-$(CONFIG_AT91_CF)				+= at91_cf.o
 obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
+obj-$(CONFIG_AT32_CF)				+= at32_cf.o
 
 sa11xx_core-y					+= soc_common.o sa11xx_base.o
 pxa2xx_core-y					+= soc_common.o pxa2xx_base.o
diff -urN linux-2.6.24.3/drivers/serial/atmel_serial.c avr32-2.6/drivers/serial/atmel_serial.c
--- linux-2.6.24.3/drivers/serial/atmel_serial.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/serial/atmel_serial.c	2008-04-23 20:12:44.000000000 +0200
@@ -7,6 +7,8 @@
  *  Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
  *
+ *  DMA support added by Chip Coldwell.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -33,7 +35,9 @@
 #include <linux/sysrq.h>
 #include <linux/tty_flip.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/atmel_pdc.h>
+#include <linux/atmel_serial.h>
 
 #include <asm/io.h>
 
@@ -45,7 +49,9 @@
 #include <asm/arch/gpio.h>
 #endif
 
-#include "atmel_serial.h"
+#define PDC_BUFFER_SIZE		512
+/* Revisit: We should calculate this based on the actual port settings */
+#define PDC_RX_TIMEOUT		(3 * 10)		/* 3 bytes */
 
 #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -74,6 +80,7 @@
 
 #define ATMEL_ISR_PASS_LIMIT	256
 
+/* UART registers. CR is write-only, hence no GET macro */
 #define UART_PUT_CR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_CR)
 #define UART_GET_MR(port)	__raw_readl((port)->membase + ATMEL_US_MR)
 #define UART_PUT_MR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_MR)
@@ -87,8 +94,6 @@
 #define UART_PUT_BRGR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_BRGR)
 #define UART_PUT_RTOR(port,v)	__raw_writel(v, (port)->membase + ATMEL_US_RTOR)
 
-// #define UART_GET_CR(port)	__raw_readl((port)->membase + ATMEL_US_CR)		// is write-only
-
  /* PDC registers */
 #define UART_PUT_PTCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
 #define UART_GET_PTSR(port)	__raw_readl((port)->membase + ATMEL_PDC_PTSR)
@@ -101,12 +106,24 @@
 
 #define UART_PUT_TPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
 #define UART_PUT_TCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
-//#define UART_PUT_TNPR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TNPR)
-//#define UART_PUT_TNCR(port,v)	__raw_writel(v, (port)->membase + ATMEL_PDC_TNCR)
 
 static int (*atmel_open_hook)(struct uart_port *);
 static void (*atmel_close_hook)(struct uart_port *);
 
+struct atmel_dma_buffer {
+	unsigned char	*buf;
+	dma_addr_t	dma_addr;
+	unsigned int	dma_size;
+	unsigned int	ofs;
+};
+
+struct atmel_uart_char {
+	u16		status;
+	u16		ch;
+};
+
+#define ATMEL_SERIAL_RINGSIZE 1024
+
 /*
  * We wrap our port structure around the generic uart_port.
  */
@@ -115,6 +132,19 @@
 	struct clk		*clk;		/* uart clock */
 	unsigned short		suspended;	/* is port suspended? */
 	int			break_active;	/* break being received */
+
+	short			use_dma_rx;	/* enable PDC receiver */
+	short			pdc_rx_idx;	/* current PDC RX buffer */
+	struct atmel_dma_buffer	pdc_rx[2];	/* PDC receier */
+
+	short			use_dma_tx;	/* enable PDC transmitter */
+	struct atmel_dma_buffer	pdc_tx;		/* PDC transmitter */
+
+	struct tasklet_struct	tasklet;
+	unsigned int		irq_status;
+	unsigned int		irq_status_prev;
+
+	struct circ_buf		rx_ring;
 };
 
 static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
@@ -123,6 +153,38 @@
 static struct console atmel_console;
 #endif
 
+static inline struct atmel_uart_port *
+to_atmel_uart_port(struct uart_port *uart)
+{
+	return container_of(uart, struct atmel_uart_port, uart);
+}
+
+#ifdef CONFIG_SERIAL_ATMEL_PDC
+static bool atmel_use_dma_rx(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+	return atmel_port->use_dma_rx;
+}
+
+static bool atmel_use_dma_tx(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+	return atmel_port->use_dma_tx;
+}
+#else
+static bool atmel_use_dma_rx(struct uart_port *port)
+{
+	return false;
+}
+
+static bool atmel_use_dma_tx(struct uart_port *port)
+{
+	return false;
+}
+#endif
+
 /*
  * Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
  */
@@ -142,8 +204,8 @@
 #ifdef CONFIG_ARCH_AT91RM9200
 	if (cpu_is_at91rm9200()) {
 		/*
-		 * AT91RM9200 Errata #39: RTS0 is not internally connected to PA21.
-		 *  We need to drive the pin manually.
+		 * AT91RM9200 Errata #39: RTS0 is not internally connected
+		 * to PA21. We need to drive the pin manually.
 		 */
 		if (port->mapbase == AT91RM9200_BASE_US0) {
 			if (mctrl & TIOCM_RTS)
@@ -204,7 +266,12 @@
  */
 static void atmel_stop_tx(struct uart_port *port)
 {
-	UART_PUT_IDR(port, ATMEL_US_TXRDY);
+	if (atmel_use_dma_tx(port)) {
+		/* disable PDC transmit */
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+	} else
+		UART_PUT_IDR(port, ATMEL_US_TXRDY);
 }
 
 /*
@@ -212,7 +279,17 @@
  */
 static void atmel_start_tx(struct uart_port *port)
 {
-	UART_PUT_IER(port, ATMEL_US_TXRDY);
+	if (atmel_use_dma_tx(port)) {
+		if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
+			/* The transmitter is already running.  Yes, we
+			   really need this.*/
+			return;
+
+		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+		/* re-enable PDC transmit */
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+	} else
+		UART_PUT_IER(port, ATMEL_US_TXRDY);
 }
 
 /*
@@ -220,7 +297,12 @@
  */
 static void atmel_stop_rx(struct uart_port *port)
 {
-	UART_PUT_IDR(port, ATMEL_US_RXRDY);
+	if (atmel_use_dma_rx(port)) {
+		/* disable PDC receive */
+		UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
+		UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+	} else
+		UART_PUT_IDR(port, ATMEL_US_RXRDY);
 }
 
 /*
@@ -228,7 +310,8 @@
  */
 static void atmel_enable_ms(struct uart_port *port)
 {
-	UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
+	UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
+			| ATMEL_US_DCDIC | ATMEL_US_CTSIC);
 }
 
 /*
@@ -243,22 +326,63 @@
 }
 
 /*
+ * Stores the incoming character in the ring buffer
+ */
+static void
+atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
+		     unsigned int ch)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct circ_buf *ring = &atmel_port->rx_ring;
+	struct atmel_uart_char *c;
+
+	if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
+		/* Buffer overflow, ignore char */
+		return;
+
+	c = &((struct atmel_uart_char *)ring->buf)[ring->head];
+	c->status	= status;
+	c->ch		= ch;
+
+	/* Make sure the character is stored before we update head. */
+	smp_wmb();
+
+	ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
+}
+
+/*
+ * Deal with parity, framing and overrun errors.
+ */
+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
+{
+	/* clear error */
+	UART_PUT_CR(port, ATMEL_US_RSTSTA);
+
+	if (status & ATMEL_US_RXBRK) {
+		/* ignore side-effect */
+		status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
+		port->icount.brk++;
+	}
+	if (status & ATMEL_US_PARE)
+		port->icount.parity++;
+	if (status & ATMEL_US_FRAME)
+		port->icount.frame++;
+	if (status & ATMEL_US_OVRE)
+		port->icount.overrun++;
+}
+
+/*
  * Characters received (called from interrupt handler)
  */
 static void atmel_rx_chars(struct uart_port *port)
 {
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-	struct tty_struct *tty = port->info->tty;
-	unsigned int status, ch, flg;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	unsigned int status, ch;
 
 	status = UART_GET_CSR(port);
 	while (status & ATMEL_US_RXRDY) {
 		ch = UART_GET_CHAR(port);
 
-		port->icount.rx++;
-
-		flg = TTY_NORMAL;
-
 		/*
 		 * note that the error handling code is
 		 * out of the main execution path
@@ -266,15 +390,14 @@
 		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
 				       | ATMEL_US_OVRE | ATMEL_US_RXBRK)
 			     || atmel_port->break_active)) {
-			UART_PUT_CR(port, ATMEL_US_RSTSTA);	/* clear error */
+
+			/* clear error */
+			UART_PUT_CR(port, ATMEL_US_RSTSTA);
+
 			if (status & ATMEL_US_RXBRK
 			    && !atmel_port->break_active) {
-				status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
-				port->icount.brk++;
 				atmel_port->break_active = 1;
 				UART_PUT_IER(port, ATMEL_US_RXBRK);
-				if (uart_handle_break(port))
-					goto ignore_char;
 			} else {
 				/*
 				 * This is either the end-of-break
@@ -287,52 +410,30 @@
 				status &= ~ATMEL_US_RXBRK;
 				atmel_port->break_active = 0;
 			}
-			if (status & ATMEL_US_PARE)
-				port->icount.parity++;
-			if (status & ATMEL_US_FRAME)
-				port->icount.frame++;
-			if (status & ATMEL_US_OVRE)
-				port->icount.overrun++;
-
-			status &= port->read_status_mask;
-
-			if (status & ATMEL_US_RXBRK)
-				flg = TTY_BREAK;
-			else if (status & ATMEL_US_PARE)
-				flg = TTY_PARITY;
-			else if (status & ATMEL_US_FRAME)
-				flg = TTY_FRAME;
 		}
 
-		if (uart_handle_sysrq_char(port, ch))
-			goto ignore_char;
-
-		uart_insert_char(port, status, ATMEL_US_OVRE, ch, flg);
-
-	ignore_char:
+		atmel_buffer_rx_char(port, status, ch);
 		status = UART_GET_CSR(port);
 	}
 
-	tty_flip_buffer_push(tty);
+	tasklet_schedule(&atmel_port->tasklet);
 }
 
 /*
- * Transmit characters (called from interrupt handler)
+ * Transmit characters (called from tasklet with TXRDY interrupt
+ * disabled)
  */
 static void atmel_tx_chars(struct uart_port *port)
 {
 	struct circ_buf *xmit = &port->info->xmit;
 
-	if (port->x_char) {
+	if (port->x_char && UART_GET_CSR(port) & ATMEL_US_TXRDY) {
 		UART_PUT_CHAR(port, port->x_char);
 		port->icount.tx++;
 		port->x_char = 0;
-		return;
 	}
-	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-		atmel_stop_tx(port);
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return;
-	}
 
 	while (UART_GET_CSR(port) & ATMEL_US_TXRDY) {
 		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
@@ -345,8 +446,88 @@
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 
-	if (uart_circ_empty(xmit))
-		atmel_stop_tx(port);
+	if (!uart_circ_empty(xmit))
+		UART_PUT_IER(port, ATMEL_US_TXRDY);
+}
+
+/*
+ * receive interrupt handler.
+ */
+static void
+atmel_handle_receive(struct uart_port *port, unsigned int pending)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+	if (atmel_use_dma_rx(port)) {
+		/*
+		 * PDC receive. Just schedule the tasklet and let it
+		 * figure out the details.
+		 *
+		 * TODO: We're not handling error flags correctly at
+		 * the moment.
+		 */
+		if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
+			UART_PUT_IDR(port, (ATMEL_US_ENDRX
+						| ATMEL_US_TIMEOUT));
+			tasklet_schedule(&atmel_port->tasklet);
+		}
+
+		if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE |
+				ATMEL_US_FRAME | ATMEL_US_PARE))
+			atmel_pdc_rxerr(port, pending);
+	}
+
+	/* Interrupt receive */
+	if (pending & ATMEL_US_RXRDY)
+		atmel_rx_chars(port);
+	else if (pending & ATMEL_US_RXBRK) {
+		/*
+		 * End of break detected. If it came along with a
+		 * character, atmel_rx_chars will handle it.
+		 */
+		UART_PUT_CR(port, ATMEL_US_RSTSTA);
+		UART_PUT_IDR(port, ATMEL_US_RXBRK);
+		atmel_port->break_active = 0;
+	}
+}
+
+/*
+ * transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
+ */
+static void
+atmel_handle_transmit(struct uart_port *port, unsigned int pending)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+	if (atmel_use_dma_tx(port)) {
+		/* PDC transmit */
+		if (pending & (ATMEL_US_ENDTX | ATMEL_US_TXBUFE)) {
+			UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+			tasklet_schedule(&atmel_port->tasklet);
+		}
+	} else {
+		/* Interrupt transmit */
+		if (pending & ATMEL_US_TXRDY) {
+			UART_PUT_IDR(port, ATMEL_US_TXRDY);
+			tasklet_schedule(&atmel_port->tasklet);
+		}
+	}
+}
+
+/*
+ * status flags interrupt handler.
+ */
+static void
+atmel_handle_status(struct uart_port *port, unsigned int pending,
+		    unsigned int status)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+
+	if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
+				| ATMEL_US_CTSIC)) {
+		atmel_port->irq_status = status;
+		tasklet_schedule(&atmel_port->tasklet);
+	}
 }
 
 /*
@@ -355,47 +536,255 @@
 static irqreturn_t atmel_interrupt(int irq, void *dev_id)
 {
 	struct uart_port *port = dev_id;
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
 	unsigned int status, pending, pass_counter = 0;
 
-	status = UART_GET_CSR(port);
-	pending = status & UART_GET_IMR(port);
-	while (pending) {
-		/* Interrupt receive */
-		if (pending & ATMEL_US_RXRDY)
-			atmel_rx_chars(port);
-		else if (pending & ATMEL_US_RXBRK) {
+	do {
+		status = UART_GET_CSR(port);
+		pending = status & UART_GET_IMR(port);
+		if (!pending)
+			break;
+
+		atmel_handle_receive(port, pending);
+		atmel_handle_status(port, pending, status);
+		atmel_handle_transmit(port, pending);
+	} while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Called from tasklet with ENDTX and TXBUFE interrupts disabled.
+ */
+static void atmel_tx_dma(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct circ_buf *xmit = &port->info->xmit;
+	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+	int count;
+
+	xmit->tail += pdc->ofs;
+	xmit->tail &= UART_XMIT_SIZE - 1;
+
+	port->icount.tx += pdc->ofs;
+	pdc->ofs = 0;
+
+	if (!uart_circ_empty(xmit)) {
+		/* more to transmit - setup next transfer */
+
+		/* disable PDC transmit */
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+		dma_sync_single_for_device(port->dev,
+					   pdc->dma_addr,
+					   pdc->dma_size,
+					   DMA_TO_DEVICE);
+
+		count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+		pdc->ofs = count;
+
+		UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
+		UART_PUT_TCR(port, count);
+		/* re-enable PDC transmit and interrupts */
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
+	} else {
+		/* nothing left to transmit - disable the transmitter */
+
+		/* disable PDC transmit */
+		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static void atmel_rx_from_ring(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct circ_buf *ring = &atmel_port->rx_ring;
+	unsigned int flg;
+	unsigned int status;
+
+	while (ring->head != ring->tail) {
+		struct atmel_uart_char c;
+
+		/* Make sure c is loaded after head. */
+		smp_rmb();
+
+		c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
+
+		ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
+
+		port->icount.rx++;
+		status = c.status;
+		flg = TTY_NORMAL;
+
+		/*
+		 * note that the error handling code is
+		 * out of the main execution path
+		 */
+		if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
+				       | ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
+			if (status & ATMEL_US_RXBRK) {
+				/* ignore side-effect */
+				status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
+
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			}
+			if (status & ATMEL_US_PARE)
+				port->icount.parity++;
+			if (status & ATMEL_US_FRAME)
+				port->icount.frame++;
+			if (status & ATMEL_US_OVRE)
+				port->icount.overrun++;
+
+			status &= port->read_status_mask;
+
+			if (status & ATMEL_US_RXBRK)
+				flg = TTY_BREAK;
+			else if (status & ATMEL_US_PARE)
+				flg = TTY_PARITY;
+			else if (status & ATMEL_US_FRAME)
+				flg = TTY_FRAME;
+		}
+
+
+		if (uart_handle_sysrq_char(port, c.ch))
+			continue;
+
+		uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
+	}
+
+	/*
+	 * Drop the lock here since it might end up calling
+	 * uart_start(), which takes the lock.
+	 */
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(port->info->tty);
+	spin_lock(&port->lock);
+}
+
+static void atmel_rx_from_dma(struct uart_port *port)
+{
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct tty_struct *tty = port->info->tty;
+	struct atmel_dma_buffer *pdc;
+	int rx_idx = atmel_port->pdc_rx_idx;
+	unsigned int head;
+	unsigned int tail;
+	unsigned int count;
+
+	do {
+		/* Reset the UART timeout early so that we don't miss one */
+		UART_PUT_CR(port, ATMEL_US_STTTO);
+
+		pdc = &atmel_port->pdc_rx[rx_idx];
+		head = UART_GET_RPR(port) - pdc->dma_addr;
+		tail = pdc->ofs;
+
+		/* If the PDC has switched buffers, RPR won't contain
+		 * any address within the current buffer. Since head
+		 * is unsigned, we just need a one-way comparison to
+		 * find out.
+		 *
+		 * In this case, we just need to consume the entire
+		 * buffer and resubmit it for DMA. This will clear the
+		 * ENDRX bit as well, so that we can safely re-enable
+		 * all interrupts below.
+		 */
+		head = min(head, pdc->dma_size);
+
+		if (likely(head != tail)) {
+			dma_sync_single_for_cpu(port->dev, pdc->dma_addr,
+					pdc->dma_size, DMA_FROM_DEVICE);
+
 			/*
-			 * End of break detected. If it came along
-			 * with a character, atmel_rx_chars will
-			 * handle it.
+			 * head will only wrap around when we recycle
+			 * the DMA buffer, and when that happens, we
+			 * explicitly set tail to 0. So head will
+			 * always be greater than tail.
 			 */
-			UART_PUT_CR(port, ATMEL_US_RSTSTA);
-			UART_PUT_IDR(port, ATMEL_US_RXBRK);
-			atmel_port->break_active = 0;
+			count = head - tail;
+
+			tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
+
+			dma_sync_single_for_device(port->dev, pdc->dma_addr,
+					pdc->dma_size, DMA_FROM_DEVICE);
+
+			port->icount.rx += count;
+			pdc->ofs = head;
+		}
+
+		/*
+		 * If the current buffer is full, we need to check if
+		 * the next one contains any additional data.
+		 */
+		if (head >= pdc->dma_size) {
+			pdc->ofs = 0;
+			UART_PUT_RNPR(port, pdc->dma_addr);
+			UART_PUT_RNCR(port, pdc->dma_size);
+
+			rx_idx = !rx_idx;
+			atmel_port->pdc_rx_idx = rx_idx;
 		}
+	} while (head >= pdc->dma_size);
+
+	/*
+	 * Drop the lock here since it might end up calling
+	 * uart_start(), which takes the lock.
+	 */
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(tty);
+	spin_lock(&port->lock);
+
+	UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+}
 
-		// TODO: All reads to CSR will clear these interrupts!
-		if (pending & ATMEL_US_RIIC) port->icount.rng++;
-		if (pending & ATMEL_US_DSRIC) port->icount.dsr++;
-		if (pending & ATMEL_US_DCDIC)
+/*
+ * tasklet handling tty stuff outside the interrupt handler.
+ */
+static void atmel_tasklet_func(unsigned long data)
+{
+	struct uart_port *port = (struct uart_port *)data;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	unsigned int status;
+	unsigned int status_change;
+
+	/* The interrupt handler does not take the lock */
+	spin_lock(&port->lock);
+
+	if (atmel_use_dma_tx(port))
+		atmel_tx_dma(port);
+	else
+		atmel_tx_chars(port);
+
+	status = atmel_port->irq_status;
+	status_change = status ^ atmel_port->irq_status_prev;
+
+	if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
+				| ATMEL_US_DCD | ATMEL_US_CTS)) {
+		/* TODO: All reads to CSR will clear these interrupts! */
+		if (status_change & ATMEL_US_RI)
+			port->icount.rng++;
+		if (status_change & ATMEL_US_DSR)
+			port->icount.dsr++;
+		if (status_change & ATMEL_US_DCD)
 			uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
-		if (pending & ATMEL_US_CTSIC)
+		if (status_change & ATMEL_US_CTS)
 			uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
-		if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
-			wake_up_interruptible(&port->info->delta_msr_wait);
-
-		/* Interrupt transmit */
-		if (pending & ATMEL_US_TXRDY)
-			atmel_tx_chars(port);
 
-		if (pass_counter++ > ATMEL_ISR_PASS_LIMIT)
-			break;
+		wake_up_interruptible(&port->info->delta_msr_wait);
 
-		status = UART_GET_CSR(port);
-		pending = status & UART_GET_IMR(port);
+		atmel_port->irq_status_prev = status;
 	}
-	return IRQ_HANDLED;
+
+	if (atmel_use_dma_rx(port))
+		atmel_rx_from_dma(port);
+	else
+		atmel_rx_from_ring(port);
+
+	spin_unlock(&port->lock);
 }
 
 /*
@@ -403,6 +792,8 @@
  */
 static int atmel_startup(struct uart_port *port)
 {
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct tty_struct *tty = port->info->tty;
 	int retval;
 
 	/*
@@ -415,13 +806,64 @@
 	/*
 	 * Allocate the IRQ
 	 */
-	retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED, "atmel_serial", port);
+	retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
+			tty ? tty->name : "atmel_serial", port);
 	if (retval) {
 		printk("atmel_serial: atmel_startup - Can't get irq\n");
 		return retval;
 	}
 
 	/*
+	 * Initialize DMA (if necessary)
+	 */
+	if (atmel_use_dma_rx(port)) {
+		int i;
+
+		for (i = 0; i < 2; i++) {
+			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+
+			pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
+			if (pdc->buf == NULL) {
+				if (i != 0) {
+					dma_unmap_single(port->dev,
+						atmel_port->pdc_rx[0].dma_addr,
+						PDC_BUFFER_SIZE,
+						DMA_FROM_DEVICE);
+					kfree(atmel_port->pdc_rx[0].buf);
+				}
+				free_irq(port->irq, port);
+				return -ENOMEM;
+			}
+			pdc->dma_addr = dma_map_single(port->dev,
+						       pdc->buf,
+						       PDC_BUFFER_SIZE,
+						       DMA_FROM_DEVICE);
+			pdc->dma_size = PDC_BUFFER_SIZE;
+			pdc->ofs = 0;
+		}
+
+		atmel_port->pdc_rx_idx = 0;
+
+		UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
+		UART_PUT_RCR(port, PDC_BUFFER_SIZE);
+
+		UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
+		UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
+	}
+	if (atmel_use_dma_tx(port)) {
+		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+		struct circ_buf *xmit = &port->info->xmit;
+
+		pdc->buf = xmit->buf;
+		pdc->dma_addr = dma_map_single(port->dev,
+					       pdc->buf,
+					       UART_XMIT_SIZE,
+					       DMA_TO_DEVICE);
+		pdc->dma_size = UART_XMIT_SIZE;
+		pdc->ofs = 0;
+	}
+
+	/*
 	 * If there is a specific "open" function (to register
 	 * control line interrupts)
 	 */
@@ -437,9 +879,21 @@
 	 * Finally, enable the serial port
 	 */
 	UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
-	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);		/* enable xmit & rcvr */
+	/* enable xmit & rcvr */
+	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
 
-	UART_PUT_IER(port, ATMEL_US_RXRDY);		/* enable receive only */
+	if (atmel_use_dma_rx(port)) {
+		/* set UART timeout */
+		UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
+		UART_PUT_CR(port, ATMEL_US_STTTO);
+
+		UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+		/* enable PDC controller */
+		UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
+	} else {
+		/* enable receive only */
+		UART_PUT_IER(port, ATMEL_US_RXRDY);
+	}
 
 	return 0;
 }
@@ -449,6 +903,38 @@
  */
 static void atmel_shutdown(struct uart_port *port)
 {
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	/*
+	 * Ensure everything is stopped.
+	 */
+	atmel_stop_rx(port);
+	atmel_stop_tx(port);
+
+	/*
+	 * Shut-down the DMA.
+	 */
+	if (atmel_use_dma_rx(port)) {
+		int i;
+
+		for (i = 0; i < 2; i++) {
+			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
+
+			dma_unmap_single(port->dev,
+					 pdc->dma_addr,
+					 pdc->dma_size,
+					 DMA_FROM_DEVICE);
+			kfree(pdc->buf);
+		}
+	}
+	if (atmel_use_dma_tx(port)) {
+		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
+
+		dma_unmap_single(port->dev,
+				 pdc->dma_addr,
+				 pdc->dma_size,
+				 DMA_TO_DEVICE);
+	}
+
 	/*
 	 * Disable all interrupts, port and break condition.
 	 */
@@ -471,45 +957,48 @@
 /*
  * Power / Clock management.
  */
-static void atmel_serial_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
+static void atmel_serial_pm(struct uart_port *port, unsigned int state,
+			    unsigned int oldstate)
 {
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
 	switch (state) {
-		case 0:
-			/*
-			 * Enable the peripheral clock for this serial port.
-			 * This is called on uart_open() or a resume event.
-			 */
-			clk_enable(atmel_port->clk);
-			break;
-		case 3:
-			/*
-			 * Disable the peripheral clock for this serial port.
-			 * This is called on uart_close() or a suspend event.
-			 */
-			clk_disable(atmel_port->clk);
-			break;
-		default:
-			printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
+	case 0:
+		/*
+		 * Enable the peripheral clock for this serial port.
+		 * This is called on uart_open() or a resume event.
+		 */
+		clk_enable(atmel_port->clk);
+		break;
+	case 3:
+		/*
+		 * Disable the peripheral clock for this serial port.
+		 * This is called on uart_close() or a suspend event.
+		 */
+		clk_disable(atmel_port->clk);
+		break;
+	default:
+		printk(KERN_ERR "atmel_serial: unknown pm %d\n", state);
 	}
 }
 
 /*
  * Change the port parameters
  */
-static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
+static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
+			      struct ktermios *old)
 {
 	unsigned long flags;
 	unsigned int mode, imr, quot, baud;
 
 	/* Get current mode register */
-	mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
+	mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
+					| ATMEL_US_NBSTOP | ATMEL_US_PAR);
 
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
 	quot = uart_get_divisor(port, baud);
 
-	if (quot > 65535) {		/* BRGR is 16-bit, so switch to slower clock */
+	if (quot > 65535) {	/* BRGR is 16-bit, so switch to slower clock */
 		quot /= 8;
 		mode |= ATMEL_US_USCLKS_MCK_DIV8;
 	}
@@ -536,18 +1025,17 @@
 
 	/* parity */
 	if (termios->c_cflag & PARENB) {
-		if (termios->c_cflag & CMSPAR) {			/* Mark or Space parity */
+		/* Mark or Space parity */
+		if (termios->c_cflag & CMSPAR) {
 			if (termios->c_cflag & PARODD)
 				mode |= ATMEL_US_PAR_MARK;
 			else
 				mode |= ATMEL_US_PAR_SPACE;
-		}
-		else if (termios->c_cflag & PARODD)
+		} else if (termios->c_cflag & PARODD)
 			mode |= ATMEL_US_PAR_ODD;
 		else
 			mode |= ATMEL_US_PAR_EVEN;
-	}
-	else
+	} else
 		mode |= ATMEL_US_PAR_NONE;
 
 	spin_lock_irqsave(&port->lock, flags);
@@ -558,6 +1046,10 @@
 	if (termios->c_iflag & (BRKINT | PARMRK))
 		port->read_status_mask |= ATMEL_US_RXBRK;
 
+	if (atmel_use_dma_rx(port))
+		/* need to enable error interrupts */
+		UART_PUT_IER(port, port->read_status_mask);
+
 	/*
 	 * Characters to ignore
 	 */
@@ -573,16 +1065,16 @@
 		if (termios->c_iflag & IGNPAR)
 			port->ignore_status_mask |= ATMEL_US_OVRE;
 	}
-
-	// TODO: Ignore all characters if CREAD is set.
+	/* TODO: Ignore all characters if CREAD is set.*/
 
 	/* update the per-port timeout */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	/* disable interrupts and drain transmitter */
-	imr = UART_GET_IMR(port);	/* get interrupt mask */
-	UART_PUT_IDR(port, -1);		/* disable all interrupts */
-	while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) { barrier(); }
+	/* save/disable interrupts and drain transmitter */
+	imr = UART_GET_IMR(port);
+	UART_PUT_IDR(port, -1);
+	while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
+		cpu_relax();
 
 	/* disable receiver and transmitter */
 	UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
@@ -708,7 +1200,8 @@
 /*
  * Configure the port from the platform device resource info.
  */
-static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, struct platform_device *pdev)
+static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port,
+				      struct platform_device *pdev)
 {
 	struct uart_port *port = &atmel_port->uart;
 	struct atmel_uart_data *data = pdev->dev.platform_data;
@@ -723,6 +1216,11 @@
 	port->mapbase	= pdev->resource[0].start;
 	port->irq	= pdev->resource[1].start;
 
+	tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
+			(unsigned long)port);
+
+	memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
+
 	if (data->regs)
 		/* Already mapped by setup code */
 		port->membase = data->regs;
@@ -731,11 +1229,17 @@
 		port->membase	= NULL;
 	}
 
-	if (!atmel_port->clk) {		/* for console, the clock could already be configured */
+	/* for console, the clock could already be configured */
+	if (!atmel_port->clk) {
 		atmel_port->clk = clk_get(&pdev->dev, "usart");
 		clk_enable(atmel_port->clk);
 		port->uartclk = clk_get_rate(atmel_port->clk);
 	}
+
+	atmel_port->use_dma_rx = data->use_dma_rx;
+	atmel_port->use_dma_tx = data->use_dma_tx;
+	if (atmel_use_dma_tx(port))
+		port->fifosize = PDC_BUFFER_SIZE;
 }
 
 /*
@@ -755,12 +1259,11 @@
 	atmel_pops.set_wake	= fns->set_wake;
 }
 
-
 #ifdef CONFIG_SERIAL_ATMEL_CONSOLE
 static void atmel_console_putchar(struct uart_port *port, int ch)
 {
 	while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
-		barrier();
+		cpu_relax();
 	UART_PUT_CHAR(port, ch);
 }
 
@@ -773,38 +1276,40 @@
 	unsigned int status, imr;
 
 	/*
-	 *	First, save IMR and then disable interrupts
+	 * First, save IMR and then disable interrupts
 	 */
-	imr = UART_GET_IMR(port);	/* get interrupt mask */
+	imr = UART_GET_IMR(port);
 	UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
 
 	uart_console_write(port, s, count, atmel_console_putchar);
 
 	/*
-	 *	Finally, wait for transmitter to become empty
-	 *	and restore IMR
+	 * Finally, wait for transmitter to become empty
+	 * and restore IMR
 	 */
 	do {
 		status = UART_GET_CSR(port);
 	} while (!(status & ATMEL_US_TXRDY));
-	UART_PUT_IER(port, imr);	/* set interrupts back the way they were */
+	/* set interrupts back the way they were */
+	UART_PUT_IER(port, imr);
 }
 
 /*
- * If the port was already initialised (eg, by a boot loader), try to determine
- * the current setup.
+ * If the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
  */
-static void __init atmel_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
+static void __init atmel_console_get_options(struct uart_port *port, int *baud,
+					     int *parity, int *bits)
 {
 	unsigned int mr, quot;
 
-// TODO: CR is a write-only register
-//	unsigned int cr;
-//
-//	cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN);
-//	if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) {
-//		/* ok, the port was enabled */
-//	}
+	/*
+	 * If the baud rate generator isn't running, the port wasn't
+	 * initialized by the boot loader.
+	 */
+	quot = UART_GET_BRGR(port);
+	if (!quot)
+		return;
 
 	mr = UART_GET_MR(port) & ATMEL_US_CHRL;
 	if (mr == ATMEL_US_CHRL_8)
@@ -824,7 +1329,6 @@
 	 * lower than one of those, as it would make us fall through
 	 * to a much lower baud rate than we really want.
 	 */
-	quot = UART_GET_BRGR(port);
 	*baud = port->uartclk / (16 * (quot - 1));
 }
 
@@ -836,10 +1340,12 @@
 	int parity = 'n';
 	int flow = 'n';
 
-	if (port->membase == 0)		/* Port not initialized yet - delay setup */
+	if (port->membase == NULL) {
+		/* Port not initialized yet - delay setup */
 		return -ENODEV;
+	}
 
-	UART_PUT_IDR(port, -1);				/* disable interrupts */
+	UART_PUT_IDR(port, -1);
 	UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
 	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
 
@@ -871,13 +1377,16 @@
 static int __init atmel_console_init(void)
 {
 	if (atmel_default_console_device) {
-		add_preferred_console(ATMEL_DEVICENAME, atmel_default_console_device->id, NULL);
-		atmel_init_port(&(atmel_ports[atmel_default_console_device->id]), atmel_default_console_device);
+		add_preferred_console(ATMEL_DEVICENAME,
+				      atmel_default_console_device->id, NULL);
+		atmel_init_port(&atmel_ports[atmel_default_console_device->id],
+				atmel_default_console_device);
 		register_console(&atmel_console);
 	}
 
 	return 0;
 }
+
 console_initcall(atmel_console_init);
 
 /*
@@ -885,34 +1394,48 @@
  */
 static int __init atmel_late_console_init(void)
 {
-	if (atmel_default_console_device && !(atmel_console.flags & CON_ENABLED))
+	if (atmel_default_console_device
+	    && !(atmel_console.flags & CON_ENABLED))
 		register_console(&atmel_console);
 
 	return 0;
 }
+
 core_initcall(atmel_late_console_init);
 
+static inline bool atmel_is_console_port(struct uart_port *port)
+{
+	return port->cons && port->cons->index == port->line;
+}
+
 #else
 #define ATMEL_CONSOLE_DEVICE	NULL
+
+static inline bool atmel_is_console_port(struct uart_port *port)
+{
+	return false;
+}
 #endif
 
 static struct uart_driver atmel_uart = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "atmel_serial",
-	.dev_name		= ATMEL_DEVICENAME,
-	.major			= SERIAL_ATMEL_MAJOR,
-	.minor			= MINOR_START,
-	.nr			= ATMEL_MAX_UART,
-	.cons			= ATMEL_CONSOLE_DEVICE,
+	.owner		= THIS_MODULE,
+	.driver_name	= "atmel_serial",
+	.dev_name	= ATMEL_DEVICENAME,
+	.major		= SERIAL_ATMEL_MAJOR,
+	.minor		= MINOR_START,
+	.nr		= ATMEL_MAX_UART,
+	.cons		= ATMEL_CONSOLE_DEVICE,
 };
 
 #ifdef CONFIG_PM
-static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state)
+static int atmel_serial_suspend(struct platform_device *pdev,
+				pm_message_t state)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
-	if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
+	if (device_may_wakeup(&pdev->dev)
+	    && !at91_suspend_entering_slow_clock())
 		enable_irq_wake(port->irq);
 	else {
 		uart_suspend_port(&atmel_uart, port);
@@ -925,13 +1448,12 @@
 static int atmel_serial_resume(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
 	if (atmel_port->suspended) {
 		uart_resume_port(&atmel_uart, port);
 		atmel_port->suspended = 0;
-	}
-	else
+	} else
 		disable_irq_wake(port->irq);
 
 	return 0;
@@ -944,15 +1466,40 @@
 static int __devinit atmel_serial_probe(struct platform_device *pdev)
 {
 	struct atmel_uart_port *port;
+	void *data;
 	int ret;
 
+	BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
+
 	port = &atmel_ports[pdev->id];
 	atmel_init_port(port, pdev);
 
+	if (!atmel_use_dma_rx(&port->uart)) {
+		ret = -ENOMEM;
+		data = kmalloc(sizeof(struct atmel_uart_char)
+				* ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
+		if (!data)
+			goto err_alloc_ring;
+		port->rx_ring.buf = data;
+	}
+
 	ret = uart_add_one_port(&atmel_uart, &port->uart);
-	if (!ret) {
-		device_init_wakeup(&pdev->dev, 1);
-		platform_set_drvdata(pdev, port);
+	if (ret)
+		goto err_add_port;
+
+	device_init_wakeup(&pdev->dev, 1);
+	platform_set_drvdata(pdev, port);
+
+	return 0;
+
+err_add_port:
+	kfree(port->rx_ring.buf);
+	port->rx_ring.buf = NULL;
+err_alloc_ring:
+	if (!atmel_is_console_port(&port->uart)) {
+		clk_disable(port->clk);
+		clk_put(port->clk);
+		port->clk = NULL;
 	}
 
 	return ret;
@@ -961,19 +1508,21 @@
 static int __devexit atmel_serial_remove(struct platform_device *pdev)
 {
 	struct uart_port *port = platform_get_drvdata(pdev);
-	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
+	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	int ret = 0;
 
-	clk_disable(atmel_port->clk);
-	clk_put(atmel_port->clk);
-
 	device_init_wakeup(&pdev->dev, 0);
 	platform_set_drvdata(pdev, NULL);
 
-	if (port) {
-		ret = uart_remove_one_port(&atmel_uart, port);
-		kfree(port);
-	}
+	ret = uart_remove_one_port(&atmel_uart, port);
+
+	tasklet_kill(&atmel_port->tasklet);
+	kfree(atmel_port->rx_ring.buf);
+
+	/* "port" is allocated statically, so we shouldn't free it */
+
+	clk_disable(atmel_port->clk);
+	clk_put(atmel_port->clk);
 
 	return ret;
 }
diff -urN linux-2.6.24.3/drivers/serial/atmel_serial.h avr32-2.6/drivers/serial/atmel_serial.h
--- linux-2.6.24.3/drivers/serial/atmel_serial.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/serial/atmel_serial.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,127 +0,0 @@
-/*
- * drivers/serial/atmel_serial.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * USART registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef ATMEL_SERIAL_H
-#define ATMEL_SERIAL_H
-
-#define ATMEL_US_CR		0x00			/* Control Register */
-#define		ATMEL_US_RSTRX		(1 <<  2)		/* Reset Receiver */
-#define		ATMEL_US_RSTTX		(1 <<  3)		/* Reset Transmitter */
-#define		ATMEL_US_RXEN		(1 <<  4)		/* Receiver Enable */
-#define		ATMEL_US_RXDIS		(1 <<  5)		/* Receiver Disable */
-#define		ATMEL_US_TXEN		(1 <<  6)		/* Transmitter Enable */
-#define		ATMEL_US_TXDIS		(1 <<  7)		/* Transmitter Disable */
-#define		ATMEL_US_RSTSTA		(1 <<  8)		/* Reset Status Bits */
-#define		ATMEL_US_STTBRK		(1 <<  9)		/* Start Break */
-#define		ATMEL_US_STPBRK		(1 << 10)		/* Stop Break */
-#define		ATMEL_US_STTTO		(1 << 11)		/* Start Time-out */
-#define		ATMEL_US_SENDA		(1 << 12)		/* Send Address */
-#define		ATMEL_US_RSTIT		(1 << 13)		/* Reset Iterations */
-#define		ATMEL_US_RSTNACK	(1 << 14)		/* Reset Non Acknowledge */
-#define		ATMEL_US_RETTO		(1 << 15)		/* Rearm Time-out */
-#define		ATMEL_US_DTREN		(1 << 16)		/* Data Terminal Ready Enable [AT91RM9200 only] */
-#define		ATMEL_US_DTRDIS		(1 << 17)		/* Data Terminal Ready Disable [AT91RM9200 only] */
-#define		ATMEL_US_RTSEN		(1 << 18)		/* Request To Send Enable */
-#define		ATMEL_US_RTSDIS		(1 << 19)		/* Request To Send Disable */
-
-#define ATMEL_US_MR		0x04			/* Mode Register */
-#define		ATMEL_US_USMODE		(0xf <<  0)		/* Mode of the USART */
-#define			ATMEL_US_USMODE_NORMAL		0
-#define			ATMEL_US_USMODE_RS485		1
-#define			ATMEL_US_USMODE_HWHS		2
-#define			ATMEL_US_USMODE_MODEM		3
-#define			ATMEL_US_USMODE_ISO7816_T0	4
-#define			ATMEL_US_USMODE_ISO7816_T1	6
-#define			ATMEL_US_USMODE_IRDA		8
-#define		ATMEL_US_USCLKS		(3   <<  4)		/* Clock Selection */
-#define			ATMEL_US_USCLKS_MCK		(0 <<  4)
-#define			ATMEL_US_USCLKS_MCK_DIV8	(1 <<  4)
-#define			ATMEL_US_USCLKS_SCK		(3 <<  4)
-#define		ATMEL_US_CHRL		(3   <<  6)		/* Character Length */
-#define			ATMEL_US_CHRL_5			(0 <<  6)
-#define			ATMEL_US_CHRL_6			(1 <<  6)
-#define			ATMEL_US_CHRL_7			(2 <<  6)
-#define			ATMEL_US_CHRL_8			(3 <<  6)
-#define		ATMEL_US_SYNC		(1 <<  8)		/* Synchronous Mode Select */
-#define		ATMEL_US_PAR		(7 <<  9)		/* Parity Type */
-#define			ATMEL_US_PAR_EVEN		(0 <<  9)
-#define			ATMEL_US_PAR_ODD		(1 <<  9)
-#define			ATMEL_US_PAR_SPACE		(2 <<  9)
-#define			ATMEL_US_PAR_MARK		(3 <<  9)
-#define			ATMEL_US_PAR_NONE		(4 <<  9)
-#define			ATMEL_US_PAR_MULTI_DROP		(6 <<  9)
-#define		ATMEL_US_NBSTOP		(3 << 12)		/* Number of Stop Bits */
-#define			ATMEL_US_NBSTOP_1		(0 << 12)
-#define			ATMEL_US_NBSTOP_1_5		(1 << 12)
-#define			ATMEL_US_NBSTOP_2		(2 << 12)
-#define		ATMEL_US_CHMODE		(3 << 14)		/* Channel Mode */
-#define			ATMEL_US_CHMODE_NORMAL		(0 << 14)
-#define			ATMEL_US_CHMODE_ECHO		(1 << 14)
-#define			ATMEL_US_CHMODE_LOC_LOOP	(2 << 14)
-#define			ATMEL_US_CHMODE_REM_LOOP	(3 << 14)
-#define		ATMEL_US_MSBF		(1 << 16)		/* Bit Order */
-#define		ATMEL_US_MODE9		(1 << 17)		/* 9-bit Character Length */
-#define		ATMEL_US_CLKO		(1 << 18)		/* Clock Output Select */
-#define		ATMEL_US_OVER		(1 << 19)		/* Oversampling Mode */
-#define		ATMEL_US_INACK		(1 << 20)		/* Inhibit Non Acknowledge */
-#define		ATMEL_US_DSNACK		(1 << 21)		/* Disable Successive NACK */
-#define		ATMEL_US_MAX_ITER	(7 << 24)		/* Max Iterations */
-#define		ATMEL_US_FILTER		(1 << 28)		/* Infrared Receive Line Filter */
-
-#define ATMEL_US_IER		0x08			/* Interrupt Enable Register */
-#define		ATMEL_US_RXRDY		(1 <<  0)		/* Receiver Ready */
-#define		ATMEL_US_TXRDY		(1 <<  1)		/* Transmitter Ready */
-#define		ATMEL_US_RXBRK		(1 <<  2)		/* Break Received / End of Break */
-#define		ATMEL_US_ENDRX		(1 <<  3)		/* End of Receiver Transfer */
-#define		ATMEL_US_ENDTX		(1 <<  4)		/* End of Transmitter Transfer */
-#define		ATMEL_US_OVRE		(1 <<  5)		/* Overrun Error */
-#define		ATMEL_US_FRAME		(1 <<  6)		/* Framing Error */
-#define		ATMEL_US_PARE		(1 <<  7)		/* Parity Error */
-#define		ATMEL_US_TIMEOUT	(1 <<  8)		/* Receiver Time-out */
-#define		ATMEL_US_TXEMPTY	(1 <<  9)		/* Transmitter Empty */
-#define		ATMEL_US_ITERATION	(1 << 10)		/* Max number of Repetitions Reached */
-#define		ATMEL_US_TXBUFE		(1 << 11)		/* Transmission Buffer Empty */
-#define		ATMEL_US_RXBUFF		(1 << 12)		/* Reception Buffer Full */
-#define		ATMEL_US_NACK		(1 << 13)		/* Non Acknowledge */
-#define		ATMEL_US_RIIC		(1 << 16)		/* Ring Indicator Input Change [AT91RM9200 only] */
-#define		ATMEL_US_DSRIC		(1 << 17)		/* Data Set Ready Input Change [AT91RM9200 only] */
-#define		ATMEL_US_DCDIC		(1 << 18)		/* Data Carrier Detect Input Change [AT91RM9200 only] */
-#define		ATMEL_US_CTSIC		(1 << 19)		/* Clear to Send Input Change */
-#define		ATMEL_US_RI		(1 << 20)		/* RI */
-#define		ATMEL_US_DSR		(1 << 21)		/* DSR */
-#define		ATMEL_US_DCD		(1 << 22)		/* DCD */
-#define		ATMEL_US_CTS		(1 << 23)		/* CTS */
-
-#define ATMEL_US_IDR		0x0c			/* Interrupt Disable Register */
-#define ATMEL_US_IMR		0x10			/* Interrupt Mask Register */
-#define ATMEL_US_CSR		0x14			/* Channel Status Register */
-#define ATMEL_US_RHR		0x18			/* Receiver Holding Register */
-#define ATMEL_US_THR		0x1c			/* Transmitter Holding Register */
-#define		ATMEL_US_SYNH		(1 << 15)		/* Transmit/Receive Sync [AT91SAM9261 only] */
-
-#define ATMEL_US_BRGR		0x20			/* Baud Rate Generator Register */
-#define		ATMEL_US_CD		(0xffff << 0)		/* Clock Divider */
-
-#define ATMEL_US_RTOR		0x24			/* Receiver Time-out Register */
-#define		ATMEL_US_TO		(0xffff << 0)		/* Time-out Value */
-
-#define ATMEL_US_TTGR		0x28			/* Transmitter Timeguard Register */
-#define		ATMEL_US_TG		(0xff << 0)		/* Timeguard Value */
-
-#define ATMEL_US_FIDI		0x40			/* FI DI Ratio Register */
-#define ATMEL_US_NER		0x44			/* Number of Errors Register */
-#define ATMEL_US_IF		0x4c			/* IrDA Filter Register */
-
-#endif
diff -urN linux-2.6.24.3/drivers/serial/Kconfig avr32-2.6/drivers/serial/Kconfig
--- linux-2.6.24.3/drivers/serial/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/serial/Kconfig	2008-04-23 20:12:44.000000000 +0200
@@ -380,6 +380,21 @@
 	  console is the device which receives all kernel messages and
 	  warnings and which allows logins in single user mode).
 
+config SERIAL_ATMEL_PDC
+	bool "Support DMA transfers on AT91 / AT32 serial port"
+	depends on SERIAL_ATMEL
+	default y
+	help
+	  Say Y here if you wish to use the PDC to do DMA transfers to
+	  and from the Atmel AT91 / AT32 serial port. In order to
+	  actually use DMA transfers, make sure that the use_dma_tx
+	  and use_dma_rx members in the atmel_uart_data struct is set
+	  appropriately for each port.
+
+	  Note that break and error handling currently doesn't work
+	  properly when DMA is enabled. Make sure that ports where
+	  this matters don't use DMA.
+
 config SERIAL_ATMEL_TTYAT
 	bool "Install as device ttyATn instead of ttySn"
 	depends on SERIAL_ATMEL=y
diff -urN linux-2.6.24.3/drivers/spi/atmel_spi.c avr32-2.6/drivers/spi/atmel_spi.c
--- linux-2.6.24.3/drivers/spi/atmel_spi.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/spi/atmel_spi.c	2008-04-23 20:12:44.000000000 +0200
@@ -51,7 +51,9 @@
 	u8			stopping;
 	struct list_head	queue;
 	struct spi_transfer	*current_transfer;
-	unsigned long		remaining_bytes;
+	unsigned long		current_remaining_bytes;
+	struct spi_transfer	*next_transfer;
+	unsigned long		next_remaining_bytes;
 
 	void			*buffer;
 	dma_addr_t		buffer_dma;
@@ -85,6 +87,16 @@
 	unsigned gpio = (unsigned) spi->controller_data;
 	unsigned active = spi->mode & SPI_CS_HIGH;
 	u32 mr;
+	int i;
+	u32 csr;
+	u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
+
+	/* Make sure clock polarity is correct */
+	for (i = 0; i < spi->master->num_chipselect; i++) {
+		csr = spi_readl(as, CSR0 + 4 * i);
+		if ((csr ^ cpol) & SPI_BIT(CPOL))
+			spi_writel(as, CSR0 + 4 * i, csr ^ SPI_BIT(CPOL));
+	}
 
 	mr = spi_readl(as, MR);
 	mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
@@ -121,6 +133,48 @@
 		gpio_set_value(gpio, !active);
 }
 
+static inline int atmel_spi_xfer_is_last(struct spi_message *msg,
+					struct spi_transfer *xfer)
+{
+	return msg->transfers.prev == &xfer->transfer_list;
+}
+
+static inline int atmel_spi_xfer_can_be_chained(struct spi_transfer *xfer)
+{
+	return xfer->delay_usecs == 0 && !xfer->cs_change;
+}
+
+static void atmel_spi_next_xfer_data(struct spi_master *master,
+				struct spi_transfer *xfer,
+				dma_addr_t *tx_dma,
+				dma_addr_t *rx_dma,
+				u32 *plen)
+{
+	struct atmel_spi	*as = spi_master_get_devdata(master);
+	u32			len = *plen;
+
+	/* use scratch buffer only when rx or tx data is unspecified */
+	if (xfer->rx_buf)
+		*rx_dma = xfer->rx_dma + xfer->len - len;
+	else {
+		*rx_dma = as->buffer_dma;
+		if (len > BUFFER_SIZE)
+			len = BUFFER_SIZE;
+	}
+	if (xfer->tx_buf)
+		*tx_dma = xfer->tx_dma + xfer->len - len;
+	else {
+		*tx_dma = as->buffer_dma;
+		if (len > BUFFER_SIZE)
+			len = BUFFER_SIZE;
+		memset(as->buffer, 0, len);
+		dma_sync_single_for_device(&as->pdev->dev,
+				as->buffer_dma, len, DMA_TO_DEVICE);
+	}
+
+	*plen = len;
+}
+
 /*
  * Submit next transfer for DMA.
  * lock is held, spi irq is blocked
@@ -130,53 +184,78 @@
 {
 	struct atmel_spi	*as = spi_master_get_devdata(master);
 	struct spi_transfer	*xfer;
-	u32			len;
+	u32			len, remaining, total;
 	dma_addr_t		tx_dma, rx_dma;
 
-	xfer = as->current_transfer;
-	if (!xfer || as->remaining_bytes == 0) {
-		if (xfer)
-			xfer = list_entry(xfer->transfer_list.next,
-					struct spi_transfer, transfer_list);
-		else
-			xfer = list_entry(msg->transfers.next,
-					struct spi_transfer, transfer_list);
-		as->remaining_bytes = xfer->len;
-		as->current_transfer = xfer;
+	if (!as->current_transfer)
+		xfer = list_entry(msg->transfers.next,
+				struct spi_transfer, transfer_list);
+	else if (!as->next_transfer)
+		xfer = list_entry(as->current_transfer->transfer_list.next,
+				struct spi_transfer, transfer_list);
+	else
+		xfer = NULL;
+
+	if (xfer) {
+		len = xfer->len;
+		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
+		remaining = xfer->len - len;
+
+		spi_writel(as, RPR, rx_dma);
+		spi_writel(as, TPR, tx_dma);
+
+		if (msg->spi->bits_per_word > 8)
+			len >>= 1;
+		spi_writel(as, RCR, len);
+		spi_writel(as, TCR, len);
+
+		dev_dbg(&msg->spi->dev,
+			"  start xfer %p: len %u tx %p/%08x rx %p/%08x\n",
+			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+			xfer->rx_buf, xfer->rx_dma);
+	} else {
+		xfer = as->next_transfer;
+		remaining = as->next_remaining_bytes;
 	}
 
-	len = as->remaining_bytes;
+	as->current_transfer = xfer;
+	as->current_remaining_bytes = remaining;
 
-	tx_dma = xfer->tx_dma + xfer->len - len;
-	rx_dma = xfer->rx_dma + xfer->len - len;
+	if (remaining > 0)
+		len = remaining;
+	else if (!atmel_spi_xfer_is_last(msg, xfer)
+			&& atmel_spi_xfer_can_be_chained(xfer)) {
+		xfer = list_entry(xfer->transfer_list.next,
+				struct spi_transfer, transfer_list);
+		len = xfer->len;
+	} else
+		xfer = NULL;
 
-	/* use scratch buffer only when rx or tx data is unspecified */
-	if (!xfer->rx_buf) {
-		rx_dma = as->buffer_dma;
-		if (len > BUFFER_SIZE)
-			len = BUFFER_SIZE;
-	}
-	if (!xfer->tx_buf) {
-		tx_dma = as->buffer_dma;
-		if (len > BUFFER_SIZE)
-			len = BUFFER_SIZE;
-		memset(as->buffer, 0, len);
-		dma_sync_single_for_device(&as->pdev->dev,
-				as->buffer_dma, len, DMA_TO_DEVICE);
-	}
+	as->next_transfer = xfer;
 
-	spi_writel(as, RPR, rx_dma);
-	spi_writel(as, TPR, tx_dma);
+	if (xfer) {
+		total = len;
+		atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
+		as->next_remaining_bytes = total - len;
+
+		spi_writel(as, RNPR, rx_dma);
+		spi_writel(as, TNPR, tx_dma);
+
+		if (msg->spi->bits_per_word > 8)
+			len >>= 1;
+		spi_writel(as, RNCR, len);
+		spi_writel(as, TNCR, len);
+
+		dev_dbg(&msg->spi->dev,
+			"  next xfer %p: len %u tx %p/%08x rx %p/%08x\n",
+			xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
+			xfer->rx_buf, xfer->rx_dma);
+	} else {
+		spi_writel(as, RNCR, 0);
+		spi_writel(as, TNCR, 0);
+	}
 
-	as->remaining_bytes -= len;
-	if (msg->spi->bits_per_word > 8)
-		len >>= 1;
-
-	/* REVISIT: when xfer->delay_usecs == 0, the PDC "next transfer"
-	 * mechanism might help avoid the IRQ latency between transfers
-	 * (and improve the nCS0 errata handling on at91rm9200 chips)
-	 *
-	 * We're also waiting for ENDRX before we start the next
+	/* REVISIT: We're waiting for ENDRX before we start the next
 	 * transfer because we need to handle some difficult timing
 	 * issues otherwise. If we wait for ENDTX in one transfer and
 	 * then starts waiting for ENDRX in the next, it's difficult
@@ -186,17 +265,7 @@
 	 *
 	 * It should be doable, though. Just not now...
 	 */
-	spi_writel(as, TNCR, 0);
-	spi_writel(as, RNCR, 0);
 	spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
-
-	dev_dbg(&msg->spi->dev,
-		"  start xfer %p: len %u tx %p/%08x rx %p/%08x imr %03x\n",
-		xfer, xfer->len, xfer->tx_buf, xfer->tx_dma,
-		xfer->rx_buf, xfer->rx_dma, spi_readl(as, IMR));
-
-	spi_writel(as, RCR, len);
-	spi_writel(as, TCR, len);
 	spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
 }
 
@@ -294,6 +363,7 @@
 	spin_lock(&as->lock);
 
 	as->current_transfer = NULL;
+	as->next_transfer = NULL;
 
 	/* continue if needed */
 	if (list_empty(&as->queue) || as->stopping)
@@ -377,7 +447,7 @@
 
 		spi_writel(as, IDR, pending);
 
-		if (as->remaining_bytes == 0) {
+		if (as->current_remaining_bytes == 0) {
 			msg->actual_length += xfer->len;
 
 			if (!msg->is_dma_mapped)
@@ -387,7 +457,7 @@
 			if (xfer->delay_usecs)
 				udelay(xfer->delay_usecs);
 
-			if (msg->transfers.prev == &xfer->transfer_list) {
+			if (atmel_spi_xfer_is_last(msg, xfer)) {
 				/* report completed message */
 				atmel_spi_msg_done(master, as, msg, 0,
 						xfer->cs_change);
@@ -490,9 +560,14 @@
 	if (!(spi->mode & SPI_CPHA))
 		csr |= SPI_BIT(NCPHA);
 
-	/* TODO: DLYBS and DLYBCT */
-	csr |= SPI_BF(DLYBS, 10);
-	csr |= SPI_BF(DLYBCT, 10);
+	/* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
+	 *
+	 * DLYBCT would add delays between words, slowing down transfers.
+	 * It could potentially be useful to cope with DMA bottlenecks, but
+	 * in those cases it's probably best to just use a lower bitrate.
+	 */
+	csr |= SPI_BF(DLYBS, 0);
+	csr |= SPI_BF(DLYBCT, 0);
 
 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
 	npcs_pin = (unsigned int)spi->controller_data;
diff -urN linux-2.6.24.3/drivers/usb/gadget/atmel_usba_udc.c avr32-2.6/drivers/usb/gadget/atmel_usba_udc.c
--- linux-2.6.24.3/drivers/usb/gadget/atmel_usba_udc.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/usb/gadget/atmel_usba_udc.c	2008-04-23 20:12:45.000000000 +0200
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/atmel_usba_udc.h>
 #include <linux/delay.h>
 
 #include <asm/gpio.h>
@@ -27,6 +28,7 @@
 
 
 static struct usba_udc the_udc;
+static struct usba_ep *usba_ep;
 
 #ifdef CONFIG_USB_GADGET_DEBUG_FS
 #include <linux/debugfs.h>
@@ -324,53 +326,6 @@
 	return 1;
 }
 
-static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
-{
-	unsigned long tmp;
-
-	DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
-	for (; len > 0; len -= 4, buf += 4, fifo += 4) {
-		tmp = *(unsigned long *)buf;
-		if (len >= 4) {
-			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
-			__raw_writel(tmp, fifo);
-		} else {
-			do {
-				DBG(DBG_FIFO, "  -> %02lx\n", tmp >> 24);
-				__raw_writeb(tmp >> 24, fifo);
-				fifo++;
-				tmp <<= 8;
-			} while (--len);
-			break;
-		}
-	}
-}
-
-static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
-{
-	union {
-		unsigned long *w;
-		unsigned char *b;
-	} p;
-	unsigned long tmp;
-
-	DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
-	for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
-		if (len >= 4) {
-			tmp = __raw_readl(fifo);
-			*p.w = tmp;
-			DBG(DBG_FIFO, "  -> %08lx\n", tmp);
-		} else {
-			do {
-				tmp = __raw_readb(fifo);
-				*p.b = tmp;
-				DBG(DBG_FIFO, " -> %02lx\n", tmp);
-				fifo++, p.b++;
-			} while (--len);
-		}
-	}
-}
-
 static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
 {
 	unsigned int transaction_len;
@@ -387,7 +342,7 @@
 		ep->ep.name, req, transaction_len,
 		req->last_transaction ? ", done" : "");
 
-	copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
+	memcpy_toio(ep->fifo, req->req.buf + req->req.actual, transaction_len);
 	usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
 	req->req.actual += transaction_len;
 }
@@ -476,7 +431,7 @@
 			bytecount = req->req.length - req->req.actual;
 		}
 
-		copy_from_fifo(req->req.buf + req->req.actual,
+		memcpy_fromio(req->req.buf + req->req.actual,
 				ep->fifo, bytecount);
 		req->req.actual += bytecount;
 
@@ -1029,33 +984,6 @@
 	.set_selfpowered	= usba_udc_set_selfpowered,
 };
 
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-{								\
-	.ep	= {						\
-		.ops		= &usba_ep_ops,			\
-		.name		= nam,				\
-		.maxpacket	= maxpkt,			\
-	},							\
-	.udc		= &the_udc,				\
-	.queue		= LIST_HEAD_INIT(usba_ep[idx].queue),	\
-	.fifo_size	= maxpkt,				\
-	.nr_banks	= maxbk,				\
-	.index		= idx,					\
-	.can_dma	= dma,					\
-	.can_isoc	= isoc,					\
-}
-
-static struct usba_ep usba_ep[] = {
-	EP("ep0", 0, 64, 1, 0, 0),
-	EP("ep1in-bulk", 1, 512, 2, 1, 1),
-	EP("ep2out-bulk", 2, 512, 2, 1, 1),
-	EP("ep3in-int", 3, 64, 3, 1, 0),
-	EP("ep4out-int", 4, 64, 3, 1, 0),
-	EP("ep5in-iso", 5, 1024, 3, 1, 1),
-	EP("ep6out-iso", 6, 1024, 3, 1, 1),
-};
-#undef EP
-
 static struct usb_endpoint_descriptor usba_ep0_desc = {
 	.bLength = USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType = USB_DT_ENDPOINT,
@@ -1074,7 +1002,6 @@
 static struct usba_udc the_udc = {
 	.gadget	= {
 		.ops		= &usba_udc_ops,
-		.ep0		= &usba_ep[0].ep,
 		.ep_list	= LIST_HEAD_INIT(the_udc.gadget.ep_list),
 		.is_dualspeed	= 1,
 		.name		= "atmel_usba_udc",
@@ -1231,7 +1158,7 @@
 		} else {
 			usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
 			usba_writel(udc, TST, USBA_TST_PKT_MODE);
-			copy_to_fifo(ep->fifo, test_packet_buffer,
+			memcpy_toio(ep->fifo, test_packet_buffer,
 					sizeof(test_packet_buffer));
 			usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
 			dev_info(dev, "Entering Test_Packet mode...\n");
@@ -1539,7 +1466,7 @@
 		}
 
 		DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
-		copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
+		memcpy_fromio(crq.data, ep->fifo, sizeof(crq));
 
 		/* Free up one bank in the FIFO so that we can
 		 * generate or receive a reply right away. */
@@ -1911,7 +1838,7 @@
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
 	fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
-	if (!regs || !fifo)
+	if (!regs || !fifo || !pdata)
 		return -ENXIO;
 
 	irq = platform_get_irq(pdev, 0);
@@ -1959,16 +1886,44 @@
 	usba_writel(udc, CTRL, 0);
 	clk_disable(pclk);
 
+	usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
+			  GFP_KERNEL);
+	if (!usba_ep)
+		goto err_alloc_ep;
+
+	the_udc.gadget.ep0 = &usba_ep[0].ep;
+
 	INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
 	usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
 	usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
 	usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
-	for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
+	usba_ep[0].ep.ops = &usba_ep_ops;
+	usba_ep[0].ep.name = pdata->ep[0].name;
+	usba_ep[0].ep.maxpacket = pdata->ep[0].fifo_size;
+	usba_ep[0].udc = &the_udc;
+	INIT_LIST_HEAD(&usba_ep[0].queue);
+	usba_ep[0].fifo_size = pdata->ep[0].fifo_size;
+	usba_ep[0].nr_banks = pdata->ep[0].nr_banks;
+	usba_ep[0].index = pdata->ep[0].index;
+	usba_ep[0].can_dma = pdata->ep[0].can_dma;
+	usba_ep[0].can_isoc = pdata->ep[0].can_isoc;
+
+	for (i = 1; i < pdata->num_ep; i++) {
 		struct usba_ep *ep = &usba_ep[i];
 
 		ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
 		ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
 		ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
+		ep->ep.ops = &usba_ep_ops;
+		ep->ep.name = pdata->ep[i].name;
+		ep->ep.maxpacket = pdata->ep[i].fifo_size;
+		ep->udc = &the_udc;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->fifo_size = pdata->ep[i].fifo_size;
+		ep->nr_banks = pdata->ep[i].nr_banks;
+		ep->index = pdata->ep[i].index;
+		ep->can_dma = pdata->ep[i].can_dma;
+		ep->can_isoc = pdata->ep[i].can_isoc;
 
 		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
 	}
@@ -1987,7 +1942,7 @@
 		goto err_device_add;
 	}
 
-	if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) {
+	if (pdata->vbus_pin >= 0) {
 		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
 			udc->vbus_pin = pdata->vbus_pin;
 
@@ -2007,7 +1962,7 @@
 	}
 
 	usba_init_debugfs(udc);
-	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
+	for (i = 1; i < pdata->num_ep; i++)
 		usba_ep_init_debugfs(udc, &usba_ep[i]);
 
 	return 0;
@@ -2015,6 +1970,8 @@
 err_device_add:
 	free_irq(irq, udc);
 err_request_irq:
+	kfree(usba_ep);
+err_alloc_ep:
 	iounmap(udc->fifo);
 err_map_fifo:
 	iounmap(udc->regs);
@@ -2032,10 +1989,11 @@
 {
 	struct usba_udc *udc;
 	int i;
+	struct usba_platform_data *pdata = pdev->dev.platform_data;
 
 	udc = platform_get_drvdata(pdev);
 
-	for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
+	for (i = 1; i < pdata->num_ep; i++)
 		usba_ep_cleanup_debugfs(&usba_ep[i]);
 	usba_cleanup_debugfs(udc);
 
diff -urN linux-2.6.24.3/drivers/video/atmel_lcdfb.c avr32-2.6/drivers/video/atmel_lcdfb.c
--- linux-2.6.24.3/drivers/video/atmel_lcdfb.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/video/atmel_lcdfb.c	2008-04-23 20:12:45.000000000 +0200
@@ -16,6 +16,7 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/backlight.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/cpu.h>
@@ -37,7 +38,9 @@
 #endif
 
 #if defined(CONFIG_ARCH_AT91)
-#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
+					 | FBINFO_PARTIAL_PAN_OK \
+					 | FBINFO_HWACCEL_YPAN)
 
 static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
 					struct fb_var_screeninfo *var)
@@ -69,12 +72,113 @@
 }
 #endif
 
+static const u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
+		| ATMEL_LCDC_POL_POSITIVE
+		| ATMEL_LCDC_ENA_PWMENABLE;
+
+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
+
+/* some bl->props field just changed */
+static int atmel_bl_update_status(struct backlight_device *bl)
+{
+	struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
+	int			power = sinfo->bl_power;
+	int			brightness = bl->props.brightness;
+
+	/* REVISIT there may be a meaningful difference between
+	 * fb_blank and power ... there seem to be some cases
+	 * this doesn't handle correctly.
+	 */
+	if (bl->props.fb_blank != sinfo->bl_power)
+		power = bl->props.fb_blank;
+	else if (bl->props.power != sinfo->bl_power)
+		power = bl->props.power;
+
+	if (brightness < 0 && power == FB_BLANK_UNBLANK)
+		brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
+	else if (power != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
+			brightness ? contrast_ctr : 0);
+
+	bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
+
+	return 0;
+}
+
+static int atmel_bl_get_brightness(struct backlight_device *bl)
+{
+	struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
+
+	return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
+}
+
+static struct backlight_ops atmel_lcdc_bl_ops = {
+	.update_status = atmel_bl_update_status,
+	.get_brightness = atmel_bl_get_brightness,
+};
+
+static void init_backlight(struct atmel_lcdfb_info *sinfo)
+{
+	struct backlight_device	*bl;
+
+	sinfo->bl_power = FB_BLANK_UNBLANK;
+
+	if (sinfo->backlight)
+		return;
+
+	bl = backlight_device_register("backlight", &sinfo->pdev->dev,
+			sinfo, &atmel_lcdc_bl_ops);
+	if (IS_ERR(sinfo->backlight)) {
+		dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
+				PTR_ERR(bl));
+		return;
+	}
+	sinfo->backlight = bl;
+
+	bl->props.power = FB_BLANK_UNBLANK;
+	bl->props.fb_blank = FB_BLANK_UNBLANK;
+	bl->props.max_brightness = 0xff;
+	bl->props.brightness = atmel_bl_get_brightness(bl);
+}
+
+static void exit_backlight(struct atmel_lcdfb_info *sinfo)
+{
+	if (sinfo->backlight)
+		backlight_device_unregister(sinfo->backlight);
+}
+
+#else
+
+static void init_backlight(struct atmel_lcdfb_info *sinfo)
+{
+	dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
+}
+
+static void exit_backlight(struct atmel_lcdfb_info *sinfo)
+{
+}
+
+#endif
+
+static void init_contrast(struct atmel_lcdfb_info *sinfo)
+{
+	/* have some default contrast/backlight settings */
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+
+	if (sinfo->lcdcon_is_backlight)
+		init_backlight(sinfo);
+}
+
 
 static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
 	.type		= FB_TYPE_PACKED_PIXELS,
 	.visual		= FB_VISUAL_TRUECOLOR,
 	.xpanstep	= 0,
-	.ypanstep	= 0,
+	.ypanstep	= 1,
 	.ywrapstep	= 0,
 	.accel		= FB_ACCEL_NONE,
 };
@@ -148,6 +252,8 @@
 		return -ENOMEM;
 	}
 
+	memset(info->screen_base, 0, info->fix.smem_len);
+
 	return 0;
 }
 
@@ -203,6 +309,26 @@
 	var->transp.offset = var->transp.length = 0;
 	var->xoffset = var->yoffset = 0;
 
+	/* Saturate vertical and horizontal timings at maximum values */
+	var->vsync_len = min_t(u32, var->vsync_len,
+			(ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
+	var->upper_margin = min_t(u32, var->upper_margin,
+			ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
+	var->lower_margin = min_t(u32, var->lower_margin,
+			ATMEL_LCDC_VFP);
+	var->right_margin = min_t(u32, var->right_margin,
+			(ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
+	var->hsync_len = min_t(u32, var->hsync_len,
+			(ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
+	var->left_margin = min_t(u32, var->left_margin,
+			ATMEL_LCDC_HBP + 1);
+
+	/* Some parameters can't be zero */
+	var->vsync_len = max_t(u32, var->vsync_len, 1);
+	var->right_margin = max_t(u32, var->right_margin, 1);
+	var->hsync_len = max_t(u32, var->hsync_len, 1);
+	var->left_margin = max_t(u32, var->left_margin, 1);
+
 	switch (var->bits_per_pixel) {
 	case 1:
 	case 2:
@@ -370,10 +496,6 @@
 	/* Disable all interrupts */
 	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
 
-	/* Set contrast */
-	value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
-	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
-	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
 	/* ...wait for DMA engine to become idle... */
 	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
 		msleep(10);
@@ -516,7 +638,6 @@
 	struct fb_info *info = sinfo->info;
 	int ret = 0;
 
-	memset_io(info->screen_base, 0, info->fix.smem_len);
 	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
 
 	dev_info(info->device,
@@ -577,6 +698,7 @@
 		sinfo->default_monspecs = pdata_sinfo->default_monspecs;
 		sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
 		sinfo->guard_time = pdata_sinfo->guard_time;
+		sinfo->lcdcon_is_backlight = pdata_sinfo->lcdcon_is_backlight;
 	} else {
 		dev_err(dev, "cannot get default configuration\n");
 		goto free_info;
@@ -645,6 +767,11 @@
 		info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
 		if (!info->screen_base)
 			goto release_intmem;
+
+		/*
+		 * Don't clear the framebuffer -- someone may have set
+		 * up a splash image.
+		 */
 	} else {
 		/* alocate memory buffer */
 		ret = atmel_lcdfb_alloc_video_memory(sinfo);
@@ -670,6 +797,9 @@
 		goto release_mem;
 	}
 
+	/* Initialize PWM for contrast or backlight ("off") */
+	init_contrast(sinfo);
+
 	/* interrupt */
 	ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
 	if (ret) {
@@ -721,6 +851,7 @@
 unregister_irqs:
 	free_irq(sinfo->irq_base, info);
 unmap_mmio:
+	exit_backlight(sinfo);
 	iounmap(sinfo->mmio);
 release_mem:
  	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
@@ -755,6 +886,7 @@
 	if (!sinfo)
 		return 0;
 
+	exit_backlight(sinfo);
 	if (sinfo->atmel_lcdfb_power_control)
 		sinfo->atmel_lcdfb_power_control(0);
 	unregister_framebuffer(info);
@@ -781,6 +913,9 @@
 
 static struct platform_driver atmel_lcdfb_driver = {
 	.remove		= __exit_p(atmel_lcdfb_remove),
+
+// FIXME need suspend, resume
+
 	.driver		= {
 		.name	= "atmel_lcdfb",
 		.owner	= THIS_MODULE,
diff -urN linux-2.6.24.3/drivers/video/backlight/Kconfig avr32-2.6/drivers/video/backlight/Kconfig
--- linux-2.6.24.3/drivers/video/backlight/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/video/backlight/Kconfig	2008-04-23 20:12:45.000000000 +0200
@@ -50,6 +50,19 @@
 	  To have support for your specific LCD panel you will have to
 	  select the proper drivers which depend on this option.
 
+config BACKLIGHT_ATMEL_LCDC
+	bool "Atmel LCDC Contrast-as-Backlight control"
+	depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
+	default y if MACH_SAM9261EK || MACH_SAM9263EK
+	help
+	  This provides a backlight control internal to the Atmel LCDC
+	  driver.  If the LCD "contrast control" on your board is wired
+	  so it controls the backlight brightness, select this option to
+	  export this as a PWM-based backlight control.
+
+	  If in doubt, it's safe to enable this option; it doesn't kick
+	  in unless the board's description says it's wired that way.
+
 config BACKLIGHT_CORGI
 	tristate "Generic (aka Sharp Corgi) Backlight Driver"
 	depends on BACKLIGHT_CLASS_DEVICE
diff -urN linux-2.6.24.3/drivers/video/console/Kconfig avr32-2.6/drivers/video/console/Kconfig
--- linux-2.6.24.3/drivers/video/console/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/video/console/Kconfig	2008-04-23 19:33:46.000000000 +0200
@@ -6,7 +6,7 @@
 
 config VGA_CONSOLE
 	bool "VGA text console" if EMBEDDED || !X86
-	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN
+	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
 	default y
 	help
 	  Saying Y here will allow you to use Linux in text mode through a
diff -urN linux-2.6.24.3/drivers/watchdog/Kconfig avr32-2.6/drivers/watchdog/Kconfig
--- linux-2.6.24.3/drivers/watchdog/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/drivers/watchdog/Kconfig	2008-04-23 20:12:45.000000000 +0200
@@ -223,7 +223,7 @@
 
 config AT32AP700X_WDT
 	tristate "AT32AP700x watchdog"
-	depends on CPU_AT32AP7000
+	depends on CPU_AT32AP700X
 	help
 	  Watchdog timer embedded into AT32AP700x devices. This will reboot
 	  your system when the timeout is reached.
diff -urN linux-2.6.24.3/include/asm-avr32/arch-at32ap/at32ap7000.h avr32-2.6/include/asm-avr32/arch-at32ap/at32ap7000.h
--- linux-2.6.24.3/include/asm-avr32/arch-at32ap/at32ap7000.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/arch-at32ap/at32ap7000.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,35 +0,0 @@
-/*
- * Pin definitions for AT32AP7000.
- *
- * Copyright (C) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_AT32AP7000_H__
-#define __ASM_ARCH_AT32AP7000_H__
-
-#define GPIO_PERIPH_A	0
-#define GPIO_PERIPH_B	1
-
-#define NR_GPIO_CONTROLLERS	4
-
-/*
- * Pin numbers identifying specific GPIO pins on the chip. They can
- * also be converted to IRQ numbers by passing them through
- * gpio_to_irq().
- */
-#define GPIO_PIOA_BASE	(0)
-#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
-#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
-#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
-#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
-
-#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
-#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
-#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
-#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
-#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
-
-#endif /* __ASM_ARCH_AT32AP7000_H__ */
diff -urN linux-2.6.24.3/include/asm-avr32/arch-at32ap/at32ap700x.h avr32-2.6/include/asm-avr32/arch-at32ap/at32ap700x.h
--- linux-2.6.24.3/include/asm-avr32/arch-at32ap/at32ap700x.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/include/asm-avr32/arch-at32ap/at32ap700x.h	2008-04-23 20:12:46.000000000 +0200
@@ -0,0 +1,35 @@
+/*
+ * Pin definitions for AT32AP7000.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AT32AP700X_H__
+#define __ASM_ARCH_AT32AP700X_H__
+
+#define GPIO_PERIPH_A	0
+#define GPIO_PERIPH_B	1
+
+#define NR_GPIO_CONTROLLERS	4
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip. They can
+ * also be converted to IRQ numbers by passing them through
+ * gpio_to_irq().
+ */
+#define GPIO_PIOA_BASE	(0)
+#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
+#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
+
+#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
+#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
+#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
+#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
+#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
+
+#endif /* __ASM_ARCH_AT32AP700X_H__ */
diff -urN linux-2.6.24.3/include/asm-avr32/arch-at32ap/board.h avr32-2.6/include/asm-avr32/arch-at32ap/board.h
--- linux-2.6.24.3/include/asm-avr32/arch-at32ap/board.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/arch-at32ap/board.h	2008-04-23 20:12:46.000000000 +0200
@@ -38,9 +38,7 @@
 at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 		     unsigned long fbmem_start, unsigned long fbmem_len);
 
-struct usba_platform_data {
-	int vbus_pin;
-};
+struct usba_platform_data;
 struct platform_device *
 at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
 
@@ -51,6 +49,9 @@
 at32_add_device_ide(unsigned int id, unsigned int extint,
 		    struct ide_platform_data *data);
 
+/* mask says which PWM channels to mux */
+struct platform_device *at32_add_device_pwm(u32 mask);
+
 /* depending on what's hooked up, not all SSC pins will be used */
 #define	ATMEL_SSC_TK		0x01
 #define	ATMEL_SSC_TF		0x02
@@ -65,8 +66,17 @@
 struct platform_device *
 at32_add_device_ssc(unsigned int id, unsigned int flags);
 
-struct platform_device *at32_add_device_twi(unsigned int id);
-struct platform_device *at32_add_device_mci(unsigned int id);
+struct i2c_board_info;
+struct platform_device *at32_add_device_twi(unsigned int id,
+					     struct i2c_board_info *b,
+					     unsigned int n);
+
+struct mci_platform_data {
+	int detect_pin;
+	int wp_pin;
+};
+struct platform_device *
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
 struct platform_device *at32_add_device_ac97c(unsigned int id);
 struct platform_device *at32_add_device_abdac(unsigned int id);
 
@@ -81,4 +91,7 @@
 at32_add_device_cf(unsigned int id, unsigned int extint,
 		struct cf_platform_data *data);
 
+struct platform_device *
+at32_add_device_psif(unsigned int id);
+
 #endif /* __ASM_ARCH_BOARD_H */
diff -urN linux-2.6.24.3/include/asm-avr32/arch-at32ap/cpu.h avr32-2.6/include/asm-avr32/arch-at32ap/cpu.h
--- linux-2.6.24.3/include/asm-avr32/arch-at32ap/cpu.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/arch-at32ap/cpu.h	2008-04-23 20:12:46.000000000 +0200
@@ -14,7 +14,7 @@
  * Only AT32AP7000 is defined for now. We can identify the specific
  * chip at runtime, but I'm not sure if it's really worth it.
  */
-#ifdef CONFIG_CPU_AT32AP7000
+#ifdef CONFIG_CPU_AT32AP700X
 # define cpu_is_at32ap7000()	(1)
 #else
 # define cpu_is_at32ap7000()	(0)
diff -urN linux-2.6.24.3/include/asm-avr32/arch-at32ap/io.h avr32-2.6/include/asm-avr32/arch-at32ap/io.h
--- linux-2.6.24.3/include/asm-avr32/arch-at32ap/io.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/arch-at32ap/io.h	2008-04-23 19:33:48.000000000 +0200
@@ -4,7 +4,7 @@
 /* For "bizarre" halfword swapping */
 #include <linux/byteorder/swabb.h>
 
-#if defined(CONFIG_AP7000_32_BIT_SMC)
+#if defined(CONFIG_AP700X_32_BIT_SMC)
 # define __swizzle_addr_b(addr)	(addr ^ 3UL)
 # define __swizzle_addr_w(addr)	(addr ^ 2UL)
 # define __swizzle_addr_l(addr)	(addr)
@@ -14,7 +14,7 @@
 # define __mem_ioswabb(a, x)	(x)
 # define __mem_ioswabw(a, x)	swab16(x)
 # define __mem_ioswabl(a, x)	swab32(x)
-#elif defined(CONFIG_AP7000_16_BIT_SMC)
+#elif defined(CONFIG_AP700X_16_BIT_SMC)
 # define __swizzle_addr_b(addr)	(addr ^ 1UL)
 # define __swizzle_addr_w(addr)	(addr)
 # define __swizzle_addr_l(addr)	(addr)
diff -urN linux-2.6.24.3/include/asm-avr32/arch-at32ap/pm.h avr32-2.6/include/asm-avr32/arch-at32ap/pm.h
--- linux-2.6.24.3/include/asm-avr32/arch-at32ap/pm.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/include/asm-avr32/arch-at32ap/pm.h	2008-04-23 20:12:46.000000000 +0200
@@ -0,0 +1,48 @@
+/*
+ * AVR32 AP Power Management.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_PM_H
+#define __ASM_AVR32_ARCH_PM_H
+
+/* Possible arguments to the "sleep" instruction */
+#define CPU_SLEEP_IDLE		0
+#define CPU_SLEEP_FROZEN	1
+#define CPU_SLEEP_STANDBY	2
+#define CPU_SLEEP_STOP		3
+#define CPU_SLEEP_STATIC	5
+
+#ifndef __ASSEMBLY__
+extern void cpu_enter_idle(void);
+
+extern bool disable_idle_sleep;
+
+static inline void cpu_disable_idle_sleep(void)
+{
+	disable_idle_sleep = true;
+}
+
+static inline void cpu_enable_idle_sleep(void)
+{
+	disable_idle_sleep = false;
+}
+
+static inline void cpu_idle_sleep(void)
+{
+	/*
+	 * If we're using the COUNT and COMPARE registers for
+	 * timekeeping, we can't use the IDLE state.
+	 */
+	if (disable_idle_sleep)
+		cpu_relax();
+	else
+		cpu_enter_idle();
+}
+#endif
+
+#endif /* __ASM_AVR32_ARCH_PM_H */
diff -urN linux-2.6.24.3/include/asm-avr32/arch-at32ap/portmux.h avr32-2.6/include/asm-avr32/arch-at32ap/portmux.h
--- linux-2.6.24.3/include/asm-avr32/arch-at32ap/portmux.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/arch-at32ap/portmux.h	2008-04-23 19:33:48.000000000 +0200
@@ -26,4 +26,16 @@
 void at32_select_gpio(unsigned int pin, unsigned long flags);
 void at32_reserve_pin(unsigned int pin);
 
+#ifdef CONFIG_GPIO_DEV
+
+/* Gang allocators and accessors; used by the GPIO /dev driver */
+int at32_gpio_port_is_valid(unsigned int port);
+int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
+void at32_deselect_pins(unsigned int port, u32 pins);
+
+u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
+void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
+
+#endif /* CONFIG_GPIO_DEV */
+
 #endif /* __ASM_ARCH_PORTMUX_H__ */
diff -urN linux-2.6.24.3/include/asm-avr32/arch-at32ap/time.h avr32-2.6/include/asm-avr32/arch-at32ap/time.h
--- linux-2.6.24.3/include/asm-avr32/arch-at32ap/time.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/arch-at32ap/time.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,112 +0,0 @@
-/*
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
-#define _ASM_AVR32_ARCH_AT32AP_TIME_H
-
-#include <linux/platform_device.h>
-
-extern struct irqaction timer_irqaction;
-extern struct platform_device at32_systc0_device;
-extern void local_timer_interrupt(int irq, void *dev_id);
-
-#define TIMER_BCR					0x000000c0
-#define TIMER_BCR_SYNC						 0
-#define TIMER_BMR					0x000000c4
-#define TIMER_BMR_TC0XC0S					 0
-#define TIMER_BMR_TC1XC1S					 2
-#define TIMER_BMR_TC2XC2S					 4
-#define TIMER_CCR					0x00000000
-#define TIMER_CCR_CLKDIS					 1
-#define TIMER_CCR_CLKEN						 0
-#define TIMER_CCR_SWTRG						 2
-#define TIMER_CMR					0x00000004
-#define TIMER_CMR_ABETRG					10
-#define TIMER_CMR_ACPA						16
-#define TIMER_CMR_ACPC						18
-#define TIMER_CMR_AEEVT						20
-#define TIMER_CMR_ASWTRG					22
-#define TIMER_CMR_BCPB						24
-#define TIMER_CMR_BCPC						26
-#define TIMER_CMR_BEEVT						28
-#define TIMER_CMR_BSWTRG					30
-#define TIMER_CMR_BURST						 4
-#define TIMER_CMR_CLKI						 3
-#define TIMER_CMR_CPCDIS					 7
-#define TIMER_CMR_CPCSTOP					 6
-#define TIMER_CMR_CPCTRG					14
-#define TIMER_CMR_EEVT						10
-#define TIMER_CMR_EEVTEDG					 8
-#define TIMER_CMR_ENETRG					12
-#define TIMER_CMR_ETRGEDG					 8
-#define TIMER_CMR_LDBDIS					 7
-#define TIMER_CMR_LDBSTOP					 6
-#define TIMER_CMR_LDRA						16
-#define TIMER_CMR_LDRB						18
-#define TIMER_CMR_TCCLKS					 0
-#define TIMER_CMR_WAVE						15
-#define TIMER_CMR_WAVSEL					13
-#define TIMER_CV					0x00000010
-#define TIMER_CV_CV						 0
-#define TIMER_IDR					0x00000028
-#define TIMER_IDR_COVFS						 0
-#define TIMER_IDR_CPAS						 2
-#define TIMER_IDR_CPBS						 3
-#define TIMER_IDR_CPCS						 4
-#define TIMER_IDR_ETRGS						 7
-#define TIMER_IDR_LDRAS						 5
-#define TIMER_IDR_LDRBS						 6
-#define TIMER_IDR_LOVRS						 1
-#define TIMER_IER					0x00000024
-#define TIMER_IER_COVFS						 0
-#define TIMER_IER_CPAS						 2
-#define TIMER_IER_CPBS						 3
-#define TIMER_IER_CPCS						 4
-#define TIMER_IER_ETRGS						 7
-#define TIMER_IER_LDRAS						 5
-#define TIMER_IER_LDRBS						 6
-#define TIMER_IER_LOVRS						 1
-#define TIMER_IMR					0x0000002c
-#define TIMER_IMR_COVFS						 0
-#define TIMER_IMR_CPAS						 2
-#define TIMER_IMR_CPBS						 3
-#define TIMER_IMR_CPCS						 4
-#define TIMER_IMR_ETRGS						 7
-#define TIMER_IMR_LDRAS						 5
-#define TIMER_IMR_LDRBS						 6
-#define TIMER_IMR_LOVRS						 1
-#define TIMER_RA					0x00000014
-#define TIMER_RA_RA						 0
-#define TIMER_RB					0x00000018
-#define TIMER_RB_RB						 0
-#define TIMER_RC					0x0000001c
-#define TIMER_RC_RC						 0
-#define TIMER_SR					0x00000020
-#define TIMER_SR_CLKSTA						16
-#define TIMER_SR_COVFS						 0
-#define TIMER_SR_CPAS						 2
-#define TIMER_SR_CPBS						 3
-#define TIMER_SR_CPCS						 4
-#define TIMER_SR_ETRGS						 7
-#define TIMER_SR_LDRAS						 5
-#define TIMER_SR_LDRBS						 6
-#define TIMER_SR_LOVRS						 1
-#define TIMER_SR_MTIOA						17
-#define TIMER_SR_MTIOB						18
-
-/* Bit manipulation macros */
-#define TIMER_BIT(name)		(1 << TIMER_##name)
-#define TIMER_BF(name,value)	((value) << TIMER_##name)
-
-/* Register access macros */
-#define timer_read(port,instance,reg) \
-	__raw_readl(port + (0x40 * instance) + TIMER_##reg)
-#define timer_write(port,instance,reg,value) \
-	__raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
-
-#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */
diff -urN linux-2.6.24.3/include/asm-avr32/asm.h avr32-2.6/include/asm-avr32/asm.h
--- linux-2.6.24.3/include/asm-avr32/asm.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/asm.h	2008-04-23 20:12:46.000000000 +0200
@@ -12,10 +12,10 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
-#define mask_interrupts		ssrf	SR_GM_BIT
-#define mask_exceptions		ssrf	SR_EM_BIT
-#define unmask_interrupts	csrf	SR_GM_BIT
-#define unmask_exceptions	csrf	SR_EM_BIT
+#define mask_interrupts		ssrf	SYSREG_GM_OFFSET
+#define mask_exceptions		ssrf	SYSREG_EM_OFFSET
+#define unmask_interrupts	csrf	SYSREG_GM_OFFSET
+#define unmask_exceptions	csrf	SYSREG_EM_OFFSET
 
 #ifdef CONFIG_FRAME_POINTER
 	.macro	save_fp
diff -urN linux-2.6.24.3/include/asm-avr32/byteorder.h avr32-2.6/include/asm-avr32/byteorder.h
--- linux-2.6.24.3/include/asm-avr32/byteorder.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/byteorder.h	2008-04-23 20:12:46.000000000 +0200
@@ -12,8 +12,10 @@
 extern unsigned short __builtin_bswap_16(unsigned short x);
 #endif
 
+#if 0
 #define __arch__swab32(x) __builtin_bswap_32(x)
 #define __arch__swab16(x) __builtin_bswap_16(x)
+#endif
 
 #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
 # define __BYTEORDER_HAS_U64__
diff -urN linux-2.6.24.3/include/asm-avr32/dma-controller.h avr32-2.6/include/asm-avr32/dma-controller.h
--- linux-2.6.24.3/include/asm-avr32/dma-controller.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/include/asm-avr32/dma-controller.h	2008-04-23 19:33:48.000000000 +0200
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_DMA_CONTROLLER_H
+#define __ASM_AVR32_DMA_CONTROLLER_H
+
+#include <linux/device.h>
+
+#define DMA_DIR_MEM_TO_MEM		0x0000
+#define DMA_DIR_MEM_TO_PERIPH		0x0001
+#define DMA_DIR_PERIPH_TO_MEM		0x0002
+#define DMA_DIR_PERIPH_TO_PERIPH	0x0003
+
+#define DMA_WIDTH_8BIT			0
+#define DMA_WIDTH_16BIT			1
+#define DMA_WIDTH_32BIT			2
+
+struct dma_request {
+	struct dma_controller *dmac;
+	struct list_head list;
+
+	unsigned short channel;
+
+	void (*xfer_complete)(struct dma_request *req);
+	void (*block_complete)(struct dma_request *req);
+	void (*error)(struct dma_request *req);
+};
+
+struct dma_request_sg {
+	struct dma_request req;
+
+	int nr_sg;
+	struct scatterlist *sg;
+	unsigned long block_size;
+	unsigned int nr_blocks;
+
+	dma_addr_t data_reg;
+	unsigned short periph_id;
+
+	unsigned char direction;
+	unsigned char width;
+};
+#define to_dma_request_sg(_req)				\
+	container_of(_req, struct dma_request_sg, req)
+
+struct dma_request_cyclic {
+	struct dma_request req;
+
+        int periods;
+	unsigned long buffer_size;
+
+        dma_addr_t buffer_start;
+	dma_addr_t data_reg;
+
+	unsigned short periph_id;
+	unsigned char direction;
+	unsigned char width;
+
+        void *dev_id;
+};
+#define to_dma_request_cyclic(_req)				\
+	container_of(_req, struct dma_request_cyclic, req)
+
+struct dma_request_memcpy {
+	struct dma_request req;
+
+	dma_addr_t src_addr;
+	unsigned int src_width;
+	unsigned int src_stride;
+
+	dma_addr_t dst_addr;
+	unsigned int dst_width;
+	unsigned int dst_stride;
+
+	size_t length;
+
+	unsigned short src_reverse:1;
+	unsigned short dst_reverse:1;
+};
+#define to_dma_request_memcpy(_req)				\
+	container_of(_req, struct dma_request_memcpy, req)
+
+struct dma_controller {
+	struct list_head list;
+	int id;
+	struct device *dev;
+
+	int (*alloc_channel)(struct dma_controller *dmac);
+	void (*release_channel)(struct dma_controller *dmac,
+				int channel);
+	int (*prepare_request_sg)(struct dma_controller *dmac,
+				  struct dma_request_sg *req);
+        int (*prepare_request_cyclic)(struct dma_controller *dmac,
+				      struct dma_request_cyclic *req);
+	int (*prepare_request_memcpy)(struct dma_controller *dmac,
+				      struct dma_request_memcpy *req);
+	int (*start_request)(struct dma_controller *dmac,
+			     unsigned int channel);
+	int (*stop_request)(struct dma_controller *dmac,
+                            unsigned int channel);
+        dma_addr_t (*get_current_pos)(struct dma_controller *dmac,
+                                      unsigned int channel);
+};
+
+static inline int
+dma_alloc_channel(struct dma_controller *dmac)
+{
+	return dmac->alloc_channel(dmac);
+}
+
+static inline void
+dma_release_channel(struct dma_controller *dmac, int chan)
+{
+	dmac->release_channel(dmac, chan);
+}
+
+static inline int
+dma_prepare_request_sg(struct dma_controller *dmac,
+		       struct dma_request_sg *req)
+{
+	return dmac->prepare_request_sg(dmac, req);
+}
+
+static inline int
+dma_prepare_request_cyclic(struct dma_controller *dmac,
+			   struct dma_request_cyclic *req)
+{
+	return dmac->prepare_request_cyclic(dmac, req);
+}
+
+static inline int
+dma_prepare_request_memcpy(struct dma_controller *dmac,
+			   struct dma_request_memcpy *req)
+{
+	return dmac->prepare_request_memcpy(dmac, req);
+}
+
+static inline int
+dma_start_request(struct dma_controller *dmac,
+		  unsigned int channel)
+{
+	return dmac->start_request(dmac, channel);
+}
+
+static inline int
+dma_stop_request(struct dma_controller *dmac,
+                 unsigned int channel)
+{
+	return dmac->stop_request(dmac, channel);
+}
+
+static inline dma_addr_t
+dma_get_current_pos(struct dma_controller *dmac,
+                    unsigned int channel)
+{
+	return dmac->get_current_pos(dmac, channel);
+}
+
+extern int register_dma_controller(struct dma_controller *dmac);
+extern struct dma_controller *find_dma_controller(int id);
+
+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
diff -urN linux-2.6.24.3/include/asm-avr32/intc.h avr32-2.6/include/asm-avr32/intc.h
--- linux-2.6.24.3/include/asm-avr32/intc.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/intc.h	1970-01-01 01:00:00.000000000 +0100
@@ -1,128 +0,0 @@
-#ifndef __ASM_AVR32_INTC_H
-#define __ASM_AVR32_INTC_H
-
-#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-
-struct irq_controller;
-struct irqaction;
-struct pt_regs;
-
-struct platform_device;
-
-/* Information about the internal interrupt controller */
-struct intc_device {
-	/* ioremapped address of configuration block */
-	void __iomem *regs;
-
-	/* the physical device */
-	struct platform_device *pdev;
-
-	/* Number of interrupt lines per group. */
-	unsigned int irqs_per_group;
-
-	/* The highest group ID + 1 */
-	unsigned int nr_groups;
-
-	/*
-	 * Bitfield indicating which groups are actually in use.  The
-	 * size of the array is
-	 * ceil(group_max / (8 * sizeof(unsigned int))).
-	 */
-	unsigned int group_mask[];
-};
-
-struct irq_controller_class {
-	/*
-	 * A short name identifying this kind of controller.
-	 */
-	const char *typename;
-	/*
-	 * Handle the IRQ.  Must do any necessary acking and masking.
-	 */
-	irqreturn_t (*handle)(int irq, void *dev_id, struct pt_regs *regs);
-	/*
-	 * Register a new IRQ handler.
-	 */
-	int (*setup)(struct irq_controller *ctrl, unsigned int irq,
-		     struct irqaction *action);
-	/*
-	 * Unregister a IRQ handler.
-	 */
-	void (*free)(struct irq_controller *ctrl, unsigned int irq,
-		     void *dev_id);
-	/*
-	 * Mask the IRQ in the interrupt controller.
-	 */
-	void (*mask)(struct irq_controller *ctrl, unsigned int irq);
-	/*
-	 * Unmask the IRQ in the interrupt controller.
-	 */
-	void (*unmask)(struct irq_controller *ctrl, unsigned int irq);
-	/*
-	 * Set the type of the IRQ. See below for possible types.
-	 * Return -EINVAL if a given type is not supported
-	 */
-	int (*set_type)(struct irq_controller *ctrl, unsigned int irq,
-			unsigned int type);
-	/*
-	 * Return the IRQ type currently set
-	 */
-	unsigned int (*get_type)(struct irq_controller *ctrl, unsigned int irq);
-};
-
-struct irq_controller {
-	struct irq_controller_class *class;
-	unsigned int irq_group;
-	unsigned int first_irq;
-	unsigned int nr_irqs;
-	struct list_head list;
-};
-
-struct intc_group_desc {
-	struct irq_controller *ctrl;
-	irqreturn_t (*handle)(int, void *, struct pt_regs *);
-	unsigned long flags;
-	void *dev_id;
-	const char *devname;
-};
-
-/*
- * The internal interrupt controller.  Defined in board/part-specific
- * devices.c.
- * TODO: Should probably be defined per-cpu.
- */
-extern struct intc_device intc;
-
-extern int request_internal_irq(unsigned int irq,
-				irqreturn_t (*handler)(int, void *, struct pt_regs *),
-				unsigned long irqflags,
-				const char *devname, void *dev_id);
-extern void free_internal_irq(unsigned int irq);
-
-/* Only used by time_init() */
-extern int setup_internal_irq(unsigned int irq, struct intc_group_desc *desc);
-
-/*
- * Set interrupt priority for a given group. `group' can be found by
- * using irq_to_group(irq). Priority can be from 0 (lowest) to 3
- * (highest). Higher-priority interrupts will preempt lower-priority
- * interrupts (unless interrupts are masked globally).
- *
- * This function does not check for conflicts within a group.
- */
-extern int intc_set_priority(unsigned int group,
-			     unsigned int priority);
-
-/*
- * Returns a bitmask of pending interrupts in a group.
- */
-extern unsigned long intc_get_pending(unsigned int group);
-
-/*
- * Register a new external interrupt controller.  Returns the first
- * external IRQ number that is assigned to the new controller.
- */
-extern int intc_register_controller(struct irq_controller *ctrl);
-
-#endif /* __ASM_AVR32_INTC_H */
diff -urN linux-2.6.24.3/include/asm-avr32/irq.h avr32-2.6/include/asm-avr32/irq.h
--- linux-2.6.24.3/include/asm-avr32/irq.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/irq.h	2008-04-23 20:12:46.000000000 +0200
@@ -11,4 +11,14 @@
 
 #define irq_canonicalize(i)	(i)
 
+#ifndef __ASSEMBLER__
+int nmi_enable(void);
+void nmi_disable(void);
+
+/*
+ * Returns a bitmask of pending interrupts in a group.
+ */
+extern unsigned long intc_get_pending(unsigned int group);
+#endif
+
 #endif /* __ASM_AVR32_IOCTLS_H */
diff -urN linux-2.6.24.3/include/asm-avr32/kdebug.h avr32-2.6/include/asm-avr32/kdebug.h
--- linux-2.6.24.3/include/asm-avr32/kdebug.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/kdebug.h	2008-04-23 19:33:48.000000000 +0200
@@ -5,6 +5,7 @@
 enum die_val {
 	DIE_BREAKPOINT,
 	DIE_SSTEP,
+	DIE_NMI,
 };
 
 #endif /* __ASM_AVR32_KDEBUG_H */
diff -urN linux-2.6.24.3/include/asm-avr32/ocd.h avr32-2.6/include/asm-avr32/ocd.h
--- linux-2.6.24.3/include/asm-avr32/ocd.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/ocd.h	2008-04-23 19:33:48.000000000 +0200
@@ -533,6 +533,11 @@
 #define ocd_read(reg)			__ocd_read(OCD_##reg)
 #define ocd_write(reg, value)		__ocd_write(OCD_##reg, value)
 
+struct task_struct;
+
+void ocd_enable(struct task_struct *child);
+void ocd_disable(struct task_struct *child);
+
 #endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_AVR32_OCD_H */
diff -urN linux-2.6.24.3/include/asm-avr32/pgtable.h avr32-2.6/include/asm-avr32/pgtable.h
--- linux-2.6.24.3/include/asm-avr32/pgtable.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/pgtable.h	2008-04-23 20:12:46.000000000 +0200
@@ -157,6 +157,7 @@
 #define _PAGE_S(x)	_PAGE_NORMAL(x)
 
 #define PAGE_COPY	_PAGE_P(PAGE_WRITE | PAGE_READ)
+#define PAGE_SHARED	_PAGE_S(PAGE_WRITE | PAGE_READ)
 
 #ifndef __ASSEMBLY__
 /*
diff -urN linux-2.6.24.3/include/asm-avr32/processor.h avr32-2.6/include/asm-avr32/processor.h
--- linux-2.6.24.3/include/asm-avr32/processor.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/processor.h	2008-04-23 19:33:48.000000000 +0200
@@ -57,11 +57,25 @@
 	unsigned short cpu_revision;
 	enum tlb_config tlb_config;
 	unsigned long features;
+	u32 device_id;
 
 	struct cache_info icache;
 	struct cache_info dcache;
 };
 
+static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu)
+{
+	return (cpu->device_id >> 1) & 0x7f;
+}
+static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu)
+{
+	return (cpu->device_id >> 12) & 0xffff;
+}
+static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu)
+{
+	return (cpu->device_id >> 28) & 0x0f;
+}
+
 extern struct avr32_cpuinfo boot_cpu_data;
 
 #ifdef CONFIG_SMP
diff -urN linux-2.6.24.3/include/asm-avr32/ptrace.h avr32-2.6/include/asm-avr32/ptrace.h
--- linux-2.6.24.3/include/asm-avr32/ptrace.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/ptrace.h	2008-04-23 19:33:48.000000000 +0200
@@ -121,7 +121,15 @@
 };
 
 #ifdef __KERNEL__
-# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
+
+#include <asm/ocd.h>
+
+#define arch_ptrace_attach(child)       ocd_enable(child)
+
+#define user_mode(regs)                 (((regs)->sr & MODE_MASK) == MODE_USER)
+#define instruction_pointer(regs)       ((regs)->pc)
+#define profile_pc(regs)                instruction_pointer(regs)
+
 extern void show_regs (struct pt_regs *);
 
 static __inline__ int valid_user_regs(struct pt_regs *regs)
@@ -141,9 +149,6 @@
 	return 0;
 }
 
-#define instruction_pointer(regs) ((regs)->pc)
-
-#define profile_pc(regs) instruction_pointer(regs)
 
 #endif /* __KERNEL__ */
 
diff -urN linux-2.6.24.3/include/asm-avr32/thread_info.h avr32-2.6/include/asm-avr32/thread_info.h
--- linux-2.6.24.3/include/asm-avr32/thread_info.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/asm-avr32/thread_info.h	2008-04-23 19:33:48.000000000 +0200
@@ -88,6 +88,7 @@
 #define TIF_MEMDIE		6
 #define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
 #define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
+#define TIF_DEBUG		30	/* debugging enabled */
 #define TIF_USERSPACE		31      /* true if FS sets userspace */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
diff -urN linux-2.6.24.3/include/linux/atmel_pwm.h avr32-2.6/include/linux/atmel_pwm.h
--- linux-2.6.24.3/include/linux/atmel_pwm.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/include/linux/atmel_pwm.h	2008-04-23 19:33:51.000000000 +0200
@@ -0,0 +1,70 @@
+#ifndef __LINUX_ATMEL_PWM_H
+#define __LINUX_ATMEL_PWM_H
+
+/**
+ * struct pwm_channel - driver handle to a PWM channel
+ * @regs: base of this channel's registers
+ * @index: number of this channel (0..31)
+ * @mck: base clock rate, which can be prescaled and maybe subdivided
+ *
+ * Drivers initialize a pwm_channel structure using pwm_channel_alloc().
+ * Then they configure its clock rate (derived from MCK), alignment,
+ * polarity, and duty cycle by writing directly to the channel registers,
+ * before enabling the channel by calling pwm_channel_enable().
+ *
+ * After emitting a PWM signal for the desired length of time, drivers
+ * may then pwm_channel_disable() or pwm_channel_free().  Both of these
+ * disable the channel, but when it's freed the IRQ is deconfigured and
+ * the channel must later be re-allocated and reconfigured.
+ *
+ * Note that if the period or duty cycle need to be changed while the
+ * PWM channel is operating, drivers must use the PWM_CUPD double buffer
+ * mechanism, either polling until they change or getting implicitly
+ * notified through a once-per-period interrupt handler.
+ */
+struct pwm_channel {
+	void __iomem	*regs;
+	unsigned	index;
+	unsigned long	mck;
+};
+
+extern int pwm_channel_alloc(int index, struct pwm_channel *ch);
+extern int pwm_channel_free(struct pwm_channel *ch);
+
+extern int pwm_clk_alloc(unsigned prescale, unsigned div);
+extern void pwm_clk_free(unsigned clk);
+
+extern int __pwm_channel_onoff(struct pwm_channel *ch, int enabled);
+
+#define pwm_channel_enable(ch)	__pwm_channel_onoff((ch), 1)
+#define pwm_channel_disable(ch)	__pwm_channel_onoff((ch), 0)
+
+/* periodic interrupts, mostly for CUPD changes to period or cycle */
+extern int pwm_channel_handler(struct pwm_channel *ch,
+		void (*handler)(struct pwm_channel *ch));
+
+/* per-channel registers (banked at pwm_channel->regs) */
+#define PWM_CMR		0x00		/* mode register */
+#define		PWM_CPR_CPD	(1 << 10)	/* set: CUPD modifies period */
+#define		PWM_CPR_CPOL	(1 << 9)	/* set: idle high */
+#define		PWM_CPR_CALG	(1 << 8)	/* set: center align */
+#define		PWM_CPR_CPRE	(0xf << 0)	/* mask: rate is mck/(2^pre) */
+#define		PWM_CPR_CLKA	(0xb << 0)	/* rate CLKA */
+#define		PWM_CPR_CLKB	(0xc << 0)	/* rate CLKB */
+#define PWM_CDTY	0x04		/* duty cycle (max of CPRD) */
+#define PWM_CPRD	0x08		/* period (count up from zero) */
+#define PWM_CCNT	0x0c		/* counter (20 bits?) */
+#define PWM_CUPD	0x10		/* update CPRD (or CDTY) next period */
+
+static inline void
+pwm_channel_writel(struct pwm_channel *pwmc, unsigned offset, u32 val)
+{
+	__raw_writel(val, pwmc->regs + offset);
+}
+
+static inline u32 pwm_channel_readl(struct pwm_channel *pwmc, unsigned offset)
+{
+	return __raw_readl(pwmc->regs + offset);
+}
+
+#endif /* __LINUX_ATMEL_PWM_H */
diff -urN linux-2.6.24.3/include/linux/atmel_serial.h avr32-2.6/include/linux/atmel_serial.h
--- linux-2.6.24.3/include/linux/atmel_serial.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/include/linux/atmel_serial.h	2008-04-23 19:33:51.000000000 +0200
@@ -0,0 +1,127 @@
+/*
+ * include/linux/atmel_serial.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * USART registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_SERIAL_H
+#define ATMEL_SERIAL_H
+
+#define ATMEL_US_CR		0x00			/* Control Register */
+#define		ATMEL_US_RSTRX		(1 <<  2)		/* Reset Receiver */
+#define		ATMEL_US_RSTTX		(1 <<  3)		/* Reset Transmitter */
+#define		ATMEL_US_RXEN		(1 <<  4)		/* Receiver Enable */
+#define		ATMEL_US_RXDIS		(1 <<  5)		/* Receiver Disable */
+#define		ATMEL_US_TXEN		(1 <<  6)		/* Transmitter Enable */
+#define		ATMEL_US_TXDIS		(1 <<  7)		/* Transmitter Disable */
+#define		ATMEL_US_RSTSTA		(1 <<  8)		/* Reset Status Bits */
+#define		ATMEL_US_STTBRK		(1 <<  9)		/* Start Break */
+#define		ATMEL_US_STPBRK		(1 << 10)		/* Stop Break */
+#define		ATMEL_US_STTTO		(1 << 11)		/* Start Time-out */
+#define		ATMEL_US_SENDA		(1 << 12)		/* Send Address */
+#define		ATMEL_US_RSTIT		(1 << 13)		/* Reset Iterations */
+#define		ATMEL_US_RSTNACK	(1 << 14)		/* Reset Non Acknowledge */
+#define		ATMEL_US_RETTO		(1 << 15)		/* Rearm Time-out */
+#define		ATMEL_US_DTREN		(1 << 16)		/* Data Terminal Ready Enable [AT91RM9200 only] */
+#define		ATMEL_US_DTRDIS		(1 << 17)		/* Data Terminal Ready Disable [AT91RM9200 only] */
+#define		ATMEL_US_RTSEN		(1 << 18)		/* Request To Send Enable */
+#define		ATMEL_US_RTSDIS		(1 << 19)		/* Request To Send Disable */
+
+#define ATMEL_US_MR		0x04			/* Mode Register */
+#define		ATMEL_US_USMODE		(0xf <<  0)		/* Mode of the USART */
+#define			ATMEL_US_USMODE_NORMAL		0
+#define			ATMEL_US_USMODE_RS485		1
+#define			ATMEL_US_USMODE_HWHS		2
+#define			ATMEL_US_USMODE_MODEM		3
+#define			ATMEL_US_USMODE_ISO7816_T0	4
+#define			ATMEL_US_USMODE_ISO7816_T1	6
+#define			ATMEL_US_USMODE_IRDA		8
+#define		ATMEL_US_USCLKS		(3   <<  4)		/* Clock Selection */
+#define			ATMEL_US_USCLKS_MCK		(0 <<  4)
+#define			ATMEL_US_USCLKS_MCK_DIV8	(1 <<  4)
+#define			ATMEL_US_USCLKS_SCK		(3 <<  4)
+#define		ATMEL_US_CHRL		(3   <<  6)		/* Character Length */
+#define			ATMEL_US_CHRL_5			(0 <<  6)
+#define			ATMEL_US_CHRL_6			(1 <<  6)
+#define			ATMEL_US_CHRL_7			(2 <<  6)
+#define			ATMEL_US_CHRL_8			(3 <<  6)
+#define		ATMEL_US_SYNC		(1 <<  8)		/* Synchronous Mode Select */
+#define		ATMEL_US_PAR		(7 <<  9)		/* Parity Type */
+#define			ATMEL_US_PAR_EVEN		(0 <<  9)
+#define			ATMEL_US_PAR_ODD		(1 <<  9)
+#define			ATMEL_US_PAR_SPACE		(2 <<  9)
+#define			ATMEL_US_PAR_MARK		(3 <<  9)
+#define			ATMEL_US_PAR_NONE		(4 <<  9)
+#define			ATMEL_US_PAR_MULTI_DROP		(6 <<  9)
+#define		ATMEL_US_NBSTOP		(3 << 12)		/* Number of Stop Bits */
+#define			ATMEL_US_NBSTOP_1		(0 << 12)
+#define			ATMEL_US_NBSTOP_1_5		(1 << 12)
+#define			ATMEL_US_NBSTOP_2		(2 << 12)
+#define		ATMEL_US_CHMODE		(3 << 14)		/* Channel Mode */
+#define			ATMEL_US_CHMODE_NORMAL		(0 << 14)
+#define			ATMEL_US_CHMODE_ECHO		(1 << 14)
+#define			ATMEL_US_CHMODE_LOC_LOOP	(2 << 14)
+#define			ATMEL_US_CHMODE_REM_LOOP	(3 << 14)
+#define		ATMEL_US_MSBF		(1 << 16)		/* Bit Order */
+#define		ATMEL_US_MODE9		(1 << 17)		/* 9-bit Character Length */
+#define		ATMEL_US_CLKO		(1 << 18)		/* Clock Output Select */
+#define		ATMEL_US_OVER		(1 << 19)		/* Oversampling Mode */
+#define		ATMEL_US_INACK		(1 << 20)		/* Inhibit Non Acknowledge */
+#define		ATMEL_US_DSNACK		(1 << 21)		/* Disable Successive NACK */
+#define		ATMEL_US_MAX_ITER	(7 << 24)		/* Max Iterations */
+#define		ATMEL_US_FILTER		(1 << 28)		/* Infrared Receive Line Filter */
+
+#define ATMEL_US_IER		0x08			/* Interrupt Enable Register */
+#define		ATMEL_US_RXRDY		(1 <<  0)		/* Receiver Ready */
+#define		ATMEL_US_TXRDY		(1 <<  1)		/* Transmitter Ready */
+#define		ATMEL_US_RXBRK		(1 <<  2)		/* Break Received / End of Break */
+#define		ATMEL_US_ENDRX		(1 <<  3)		/* End of Receiver Transfer */
+#define		ATMEL_US_ENDTX		(1 <<  4)		/* End of Transmitter Transfer */
+#define		ATMEL_US_OVRE		(1 <<  5)		/* Overrun Error */
+#define		ATMEL_US_FRAME		(1 <<  6)		/* Framing Error */
+#define		ATMEL_US_PARE		(1 <<  7)		/* Parity Error */
+#define		ATMEL_US_TIMEOUT	(1 <<  8)		/* Receiver Time-out */
+#define		ATMEL_US_TXEMPTY	(1 <<  9)		/* Transmitter Empty */
+#define		ATMEL_US_ITERATION	(1 << 10)		/* Max number of Repetitions Reached */
+#define		ATMEL_US_TXBUFE		(1 << 11)		/* Transmission Buffer Empty */
+#define		ATMEL_US_RXBUFF		(1 << 12)		/* Reception Buffer Full */
+#define		ATMEL_US_NACK		(1 << 13)		/* Non Acknowledge */
+#define		ATMEL_US_RIIC		(1 << 16)		/* Ring Indicator Input Change [AT91RM9200 only] */
+#define		ATMEL_US_DSRIC		(1 << 17)		/* Data Set Ready Input Change [AT91RM9200 only] */
+#define		ATMEL_US_DCDIC		(1 << 18)		/* Data Carrier Detect Input Change [AT91RM9200 only] */
+#define		ATMEL_US_CTSIC		(1 << 19)		/* Clear to Send Input Change */
+#define		ATMEL_US_RI		(1 << 20)		/* RI */
+#define		ATMEL_US_DSR		(1 << 21)		/* DSR */
+#define		ATMEL_US_DCD		(1 << 22)		/* DCD */
+#define		ATMEL_US_CTS		(1 << 23)		/* CTS */
+
+#define ATMEL_US_IDR		0x0c			/* Interrupt Disable Register */
+#define ATMEL_US_IMR		0x10			/* Interrupt Mask Register */
+#define ATMEL_US_CSR		0x14			/* Channel Status Register */
+#define ATMEL_US_RHR		0x18			/* Receiver Holding Register */
+#define ATMEL_US_THR		0x1c			/* Transmitter Holding Register */
+#define		ATMEL_US_SYNH		(1 << 15)		/* Transmit/Receive Sync [AT91SAM9261 only] */
+
+#define ATMEL_US_BRGR		0x20			/* Baud Rate Generator Register */
+#define		ATMEL_US_CD		(0xffff << 0)		/* Clock Divider */
+
+#define ATMEL_US_RTOR		0x24			/* Receiver Time-out Register */
+#define		ATMEL_US_TO		(0xffff << 0)		/* Time-out Value */
+
+#define ATMEL_US_TTGR		0x28			/* Transmitter Timeguard Register */
+#define		ATMEL_US_TG		(0xff << 0)		/* Timeguard Value */
+
+#define ATMEL_US_FIDI		0x40			/* FI DI Ratio Register */
+#define ATMEL_US_NER		0x44			/* Number of Errors Register */
+#define ATMEL_US_IF		0x4c			/* IrDA Filter Register */
+
+#endif
diff -urN linux-2.6.24.3/include/linux/atmel_tc.h avr32-2.6/include/linux/atmel_tc.h
--- linux-2.6.24.3/include/linux/atmel_tc.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/include/linux/atmel_tc.h	2008-04-23 20:12:46.000000000 +0200
@@ -0,0 +1,252 @@
+/*
+ * Timer/Counter Unit (TC) registers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_TC_H
+#define ATMEL_TC_H
+
+#include <linux/compiler.h>
+#include <linux/list.h>
+
+/*
+ * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
+ * three general-purpose 16-bit timers.  These timers share one register bank.
+ * Depending on the SOC, each timer may have its own clock and IRQ, or those
+ * may be shared by the whole TC block.
+ *
+ * These TC blocks may have up to nine external pins:  TCLK0..2 signals for
+ * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
+ * or triggering.  Those pins need to be set up for use with the TC block,
+ * else they will be used as GPIOs or for a different controller.
+ *
+ * Although we expect each TC block to have a platform_device node, those
+ * nodes are not what drivers bind to.  Instead, they ask for a specific
+ * TC block, by number ... which is a common approach on systems with many
+ * timers.  Then they use clk_get() and platform_get_irq() to get clock and
+ * IRQ resources.
+ */
+
+struct clk;
+
+/**
+ * struct atmel_tc - information about a Timer/Counter Block
+ * @pdev: physical device
+ * @iomem: resource associated with the I/O register
+ * @regs: mapping through which the I/O registers can be accessed
+ * @irq: irq for each of the three channels
+ * @clk: internal clock source for each of the three channels
+ * @node: list node, for tclib internal use
+ *
+ * On some platforms, each TC channel has its own clocks and IRQs,
+ * while on others, all TC channels share the same clock and IRQ.
+ * Drivers should clk_enable() all the clocks they need even though
+ * all the entries in @clk may point to the same physical clock.
+ * Likewise, drivers should request irqs independently for each
+ * channel, but they must use IRQF_SHARED in case some of the entries
+ * in @irq are actually the same IRQ.
+ */
+struct atmel_tc {
+	struct platform_device	*pdev;
+	struct resource		*iomem;
+	void __iomem		*regs;
+	int			irq[3];
+	struct clk		*clk[3];
+	struct list_head	node;
+};
+
+extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name);
+extern void atmel_tc_free(struct atmel_tc *tc);
+
+/* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
+extern const u8 atmel_tc_divisors[5];
+
+
+/*
+ * Two registers have block-wide controls.  These are: configuring the three
+ * "external" clocks (or event sources) used by the timer channels; and
+ * synchronizing the timers by resetting them all at once.
+ *
+ * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
+ * signals.  Or, it can mean "external to timer", using the TIOA output from
+ * one of the other two timers that's being run in waveform mode.
+ */
+
+#define ATMEL_TC_BCR	0xc0		/* TC Block Control Register */
+#define     ATMEL_TC_SYNC	(1 << 0)	/* synchronize timers */
+
+#define ATMEL_TC_BMR	0xc4		/* TC Block Mode Register */
+#define     ATMEL_TC_TC0XC0S	(3 << 0)	/* external clock 0 source */
+#define        ATMEL_TC_TC0XC0S_TCLK0	(0 << 0)
+#define        ATMEL_TC_TC0XC0S_NONE	(1 << 0)
+#define        ATMEL_TC_TC0XC0S_TIOA1	(2 << 0)
+#define        ATMEL_TC_TC0XC0S_TIOA2	(3 << 0)
+#define     ATMEL_TC_TC1XC1S	(3 << 2)	/* external clock 1 source */
+#define        ATMEL_TC_TC1XC1S_TCLK1	(0 << 2)
+#define        ATMEL_TC_TC1XC1S_NONE	(1 << 2)
+#define        ATMEL_TC_TC1XC1S_TIOA0	(2 << 2)
+#define        ATMEL_TC_TC1XC1S_TIOA2	(3 << 2)
+#define     ATMEL_TC_TC2XC2S	(3 << 4)	/* external clock 2 source */
+#define        ATMEL_TC_TC2XC2S_TCLK2	(0 << 4)
+#define        ATMEL_TC_TC2XC2S_NONE	(1 << 4)
+#define        ATMEL_TC_TC2XC2S_TIOA0	(2 << 4)
+#define        ATMEL_TC_TC2XC2S_TIOA1	(3 << 4)
+
+
+/*
+ * Each TC block has three "channels", each with one counter and controls.
+ *
+ * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
+ * when it's not "external") is silicon-specific.  AT91 platforms use one
+ * set of definitions; AVR32 platforms use a different set.  Don't hard-wire
+ * such knowledge into your code, use the global "atmel_tc_divisors" ...
+ * where index N is the divisor for clock N+1, else zero to indicate it uses
+ * the 32 KiHz clock.
+ *
+ * The timers can be chained in various ways, and operated in "waveform"
+ * generation mode (including PWM) or "capture" mode (to time events).  In
+ * both modes, behavior can be configured in many ways.
+ *
+ * Each timer has two I/O pins, TIOA and TIOB.  Waveform mode uses TIOA as a
+ * PWM output, and TIOB as either another PWM or as a trigger.  Capture mode
+ * uses them only as inputs.
+ */
+#define ATMEL_TC_CHAN(idx)	((idx)*0x40)
+#define ATMEL_TC_REG(idx, reg)	(ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
+
+#define ATMEL_TC_CCR	0x00		/* Channel Control Register */
+#define     ATMEL_TC_CLKEN	(1 << 0)	/* clock enable */
+#define     ATMEL_TC_CLKDIS	(1 << 1)	/* clock disable */
+#define     ATMEL_TC_SWTRG	(1 << 2)	/* software trigger */
+
+#define ATMEL_TC_CMR	0x04		/* Channel Mode Register */
+
+/* Both modes share some CMR bits */
+#define     ATMEL_TC_TCCLKS	(7 << 0)	/* clock source */
+#define        ATMEL_TC_TIMER_CLOCK1	(0 << 0)
+#define        ATMEL_TC_TIMER_CLOCK2	(1 << 0)
+#define        ATMEL_TC_TIMER_CLOCK3	(2 << 0)
+#define        ATMEL_TC_TIMER_CLOCK4	(3 << 0)
+#define        ATMEL_TC_TIMER_CLOCK5	(4 << 0)
+#define        ATMEL_TC_XC0		(5 << 0)
+#define        ATMEL_TC_XC1		(6 << 0)
+#define        ATMEL_TC_XC2		(7 << 0)
+#define     ATMEL_TC_CLKI	(1 << 3)	/* clock invert */
+#define     ATMEL_TC_BURST	(3 << 4)	/* clock gating */
+#define        ATMEL_TC_GATE_NONE	(0 << 4)
+#define        ATMEL_TC_GATE_XC0	(1 << 4)
+#define        ATMEL_TC_GATE_XC1	(2 << 4)
+#define        ATMEL_TC_GATE_XC2	(3 << 4)
+#define     ATMEL_TC_WAVE	(1 << 15)	/* true = Waveform mode */
+
+/* CAPTURE mode CMR bits */
+#define     ATMEL_TC_LDBSTOP	(1 << 6)	/* counter stops on RB load */
+#define     ATMEL_TC_LDBDIS	(1 << 7)	/* counter disable on RB load */
+#define     ATMEL_TC_ETRGEDG	(3 << 8)	/* external trigger edge */
+#define        ATMEL_TC_ETRGEDG_NONE	(0 << 8)
+#define        ATMEL_TC_ETRGEDG_RISING	(1 << 8)
+#define        ATMEL_TC_ETRGEDG_FALLING	(2 << 8)
+#define        ATMEL_TC_ETRGEDG_BOTH	(3 << 8)
+#define     ATMEL_TC_ABETRG	(1 << 10)	/* external trigger is TIOA? */
+#define     ATMEL_TC_CPCTRG	(1 << 14)	/* RC compare trigger enable */
+#define     ATMEL_TC_LDRA	(3 << 16)	/* RA loading edge (of TIOA) */
+#define        ATMEL_TC_LDRA_NONE	(0 << 16)
+#define        ATMEL_TC_LDRA_RISING	(1 << 16)
+#define        ATMEL_TC_LDRA_FALLING	(2 << 16)
+#define        ATMEL_TC_LDRA_BOTH	(3 << 16)
+#define     ATMEL_TC_LDRB	(3 << 18)	/* RB loading edge (of TIOA) */
+#define        ATMEL_TC_LDRB_NONE	(0 << 18)
+#define        ATMEL_TC_LDRB_RISING	(1 << 18)
+#define        ATMEL_TC_LDRB_FALLING	(2 << 18)
+#define        ATMEL_TC_LDRB_BOTH	(3 << 18)
+
+/* WAVEFORM mode CMR bits */
+#define     ATMEL_TC_CPCSTOP	(1 <<  6)	/* RC compare stops counter */
+#define     ATMEL_TC_CPCDIS	(1 <<  7)	/* RC compare disables counter */
+#define     ATMEL_TC_EEVTEDG	(3 <<  8)	/* external event edge */
+#define        ATMEL_TC_EEVTEDG_NONE	(0 << 8)
+#define        ATMEL_TC_EEVTEDG_RISING	(1 << 8)
+#define        ATMEL_TC_EEVTEDG_FALLING	(2 << 8)
+#define        ATMEL_TC_EEVTEDG_BOTH	(3 << 8)
+#define     ATMEL_TC_EEVT	(3 << 10)	/* external event source */
+#define        ATMEL_TC_EEVT_TIOB	(0 << 10)
+#define        ATMEL_TC_EEVT_XC0	(1 << 10)
+#define        ATMEL_TC_EEVT_XC1	(2 << 10)
+#define        ATMEL_TC_EEVT_XC2	(3 << 10)
+#define     ATMEL_TC_ENETRG	(1 << 12)	/* external event is trigger */
+#define     ATMEL_TC_WAVESEL	(3 << 13)	/* waveform type */
+#define        ATMEL_TC_WAVESEL_UP	(0 << 13)
+#define        ATMEL_TC_WAVESEL_UPDOWN	(1 << 13)
+#define        ATMEL_TC_WAVESEL_UP_AUTO	(2 << 13)
+#define        ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
+#define     ATMEL_TC_ACPA	(3 << 16)	/* RA compare changes TIOA */
+#define        ATMEL_TC_ACPA_NONE	(0 << 16)
+#define        ATMEL_TC_ACPA_SET	(1 << 16)
+#define        ATMEL_TC_ACPA_CLEAR	(2 << 16)
+#define        ATMEL_TC_ACPA_TOGGLE	(3 << 16)
+#define     ATMEL_TC_ACPC	(3 << 18)	/* RC compare changes TIOA */
+#define        ATMEL_TC_ACPC_NONE	(0 << 18)
+#define        ATMEL_TC_ACPC_SET	(1 << 18)
+#define        ATMEL_TC_ACPC_CLEAR	(2 << 18)
+#define        ATMEL_TC_ACPC_TOGGLE	(3 << 18)
+#define     ATMEL_TC_AEEVT	(3 << 20)	/* external event changes TIOA */
+#define        ATMEL_TC_AEEVT_NONE	(0 << 20)
+#define        ATMEL_TC_AEEVT_SET	(1 << 20)
+#define        ATMEL_TC_AEEVT_CLEAR	(2 << 20)
+#define        ATMEL_TC_AEEVT_TOGGLE	(3 << 20)
+#define     ATMEL_TC_ASWTRG	(3 << 22)	/* software trigger changes TIOA */
+#define        ATMEL_TC_ASWTRG_NONE	(0 << 22)
+#define        ATMEL_TC_ASWTRG_SET	(1 << 22)
+#define        ATMEL_TC_ASWTRG_CLEAR	(2 << 22)
+#define        ATMEL_TC_ASWTRG_TOGGLE	(3 << 22)
+#define     ATMEL_TC_BCPB	(3 << 24)	/* RB compare changes TIOB */
+#define        ATMEL_TC_BCPB_NONE	(0 << 24)
+#define        ATMEL_TC_BCPB_SET	(1 << 24)
+#define        ATMEL_TC_BCPB_CLEAR	(2 << 24)
+#define        ATMEL_TC_BCPB_TOGGLE	(3 << 24)
+#define     ATMEL_TC_BCPC	(3 << 26)	/* RC compare changes TIOB */
+#define        ATMEL_TC_BCPC_NONE	(0 << 26)
+#define        ATMEL_TC_BCPC_SET	(1 << 26)
+#define        ATMEL_TC_BCPC_CLEAR	(2 << 26)
+#define        ATMEL_TC_BCPC_TOGGLE	(3 << 26)
+#define     ATMEL_TC_BEEVT	(3 << 28)	/* external event changes TIOB */
+#define        ATMEL_TC_BEEVT_NONE	(0 << 28)
+#define        ATMEL_TC_BEEVT_SET	(1 << 28)
+#define        ATMEL_TC_BEEVT_CLEAR	(2 << 28)
+#define        ATMEL_TC_BEEVT_TOGGLE	(3 << 28)
+#define     ATMEL_TC_BSWTRG	(3 << 30)	/* software trigger changes TIOB */
+#define        ATMEL_TC_BSWTRG_NONE	(0 << 30)
+#define        ATMEL_TC_BSWTRG_SET	(1 << 30)
+#define        ATMEL_TC_BSWTRG_CLEAR	(2 << 30)
+#define        ATMEL_TC_BSWTRG_TOGGLE	(3 << 30)
+
+#define ATMEL_TC_CV	0x10		/* counter Value */
+#define ATMEL_TC_RA	0x14		/* register A */
+#define ATMEL_TC_RB	0x18		/* register B */
+#define ATMEL_TC_RC	0x1c		/* register C */
+
+#define ATMEL_TC_SR	0x20		/* status (read-only) */
+/* Status-only flags */
+#define     ATMEL_TC_CLKSTA	(1 << 16)	/* clock enabled */
+#define     ATMEL_TC_MTIOA	(1 << 17)	/* TIOA mirror */
+#define     ATMEL_TC_MTIOB	(1 << 18)	/* TIOB mirror */
+
+#define ATMEL_TC_IER	0x24		/* interrupt enable (write-only) */
+#define ATMEL_TC_IDR	0x28		/* interrupt disable (write-only) */
+#define ATMEL_TC_IMR	0x2c		/* interrupt mask (read-only) */
+
+/* Status and IRQ flags */
+#define     ATMEL_TC_COVFS	(1 <<  0)	/* counter overflow */
+#define     ATMEL_TC_LOVRS	(1 <<  1)	/* load overrun */
+#define     ATMEL_TC_CPAS	(1 <<  2)	/* RA compare */
+#define     ATMEL_TC_CPBS	(1 <<  3)	/* RB compare */
+#define     ATMEL_TC_CPCS	(1 <<  4)	/* RC compare */
+#define     ATMEL_TC_LDRAS	(1 <<  5)	/* RA loading */
+#define     ATMEL_TC_LDRBS	(1 <<  6)	/* RB loading */
+#define     ATMEL_TC_ETRGS	(1 <<  7)	/* external trigger */
+
+#endif
diff -urN linux-2.6.24.3/include/linux/usb/atmel_usba_udc.h avr32-2.6/include/linux/usb/atmel_usba_udc.h
--- linux-2.6.24.3/include/linux/usb/atmel_usba_udc.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/include/linux/usb/atmel_usba_udc.h	2008-04-23 20:12:47.000000000 +0200
@@ -0,0 +1,22 @@
+/*
+ * Platform data definitions for Atmel USBA gadget driver.
+ */
+#ifndef __LINUX_USB_USBA_H
+#define __LINUX_USB_USBA_H
+
+struct usba_ep_data {
+	char	*name;
+	int	index;
+	int	fifo_size;
+	int	nr_banks;
+	int	can_dma;
+	int	can_isoc;
+};
+
+struct usba_platform_data {
+	int			vbus_pin;
+	int			num_ep;
+	struct usba_ep_data	ep[0];
+};
+
+#endif /* __LINUX_USB_USBA_H */
diff -urN linux-2.6.24.3/include/video/atmel_lcdc.h avr32-2.6/include/video/atmel_lcdc.h
--- linux-2.6.24.3/include/video/atmel_lcdc.h	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/include/video/atmel_lcdc.h	2008-04-23 19:33:52.000000000 +0200
@@ -22,7 +22,7 @@
 #ifndef __ATMEL_LCDC_H__
 #define __ATMEL_LCDC_H__
 
- /* LCD Controller info data structure */
+ /* LCD Controller info data structure, stored in device platform_data */
 struct atmel_lcdfb_info {
 	spinlock_t		lock;
 	struct fb_info		*info;
@@ -33,7 +33,14 @@
 	struct platform_device	*pdev;
 	struct clk		*bus_clk;
 	struct clk		*lcdc_clk;
-	unsigned int		default_bpp;
+
+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
+	struct backlight_device	*backlight;
+	u8			bl_power;
+#endif
+	bool			lcdcon_is_backlight;
+
+	u8			default_bpp;
 	unsigned int		default_lcdcon2;
 	unsigned int		default_dmacon;
 	void (*atmel_lcdfb_power_control)(int on);
@@ -115,20 +122,20 @@
 #define		ATMEL_LCDC_MEMOR_LITTLE		(1 << 31)
 
 #define ATMEL_LCDC_TIM1		0x0808
-#define	ATMEL_LCDC_VFP		(0xff <<  0)
+#define	ATMEL_LCDC_VFP		(0xffU <<  0)
 #define	ATMEL_LCDC_VBP_OFFSET		8
-#define	ATMEL_LCDC_VBP		(0xff <<  ATMEL_LCDC_VBP_OFFSET)
+#define	ATMEL_LCDC_VBP		(0xffU <<  ATMEL_LCDC_VBP_OFFSET)
 #define	ATMEL_LCDC_VPW_OFFSET		16
-#define	ATMEL_LCDC_VPW		(0x3f << ATMEL_LCDC_VPW_OFFSET)
+#define	ATMEL_LCDC_VPW		(0x3fU << ATMEL_LCDC_VPW_OFFSET)
 #define	ATMEL_LCDC_VHDLY_OFFSET		24
-#define	ATMEL_LCDC_VHDLY	(0xf  << ATMEL_LCDC_VHDLY_OFFSET)
+#define	ATMEL_LCDC_VHDLY	(0xfU  << ATMEL_LCDC_VHDLY_OFFSET)
 
 #define ATMEL_LCDC_TIM2		0x080c
-#define	ATMEL_LCDC_HBP		(0xff  <<  0)
+#define	ATMEL_LCDC_HBP		(0xffU  <<  0)
 #define	ATMEL_LCDC_HPW_OFFSET		8
-#define	ATMEL_LCDC_HPW		(0x3f  <<  ATMEL_LCDC_HPW_OFFSET)
+#define	ATMEL_LCDC_HPW		(0x3fU  <<  ATMEL_LCDC_HPW_OFFSET)
 #define	ATMEL_LCDC_HFP_OFFSET		21
-#define	ATMEL_LCDC_HFP		(0x7ff << ATMEL_LCDC_HFP_OFFSET)
+#define	ATMEL_LCDC_HFP		(0x7ffU << ATMEL_LCDC_HFP_OFFSET)
 
 #define ATMEL_LCDC_LCDFRMCFG	0x0810
 #define	ATMEL_LCDC_LINEVAL	(0x7ff <<  0)
diff -urN linux-2.6.24.3/init/do_mounts.c avr32-2.6/init/do_mounts.c
--- linux-2.6.24.3/init/do_mounts.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/init/do_mounts.c	2008-04-23 20:12:47.000000000 +0200
@@ -219,8 +219,14 @@
 
 static int __init rootwait_setup(char *str)
 {
-	if (*str)
+	if (*str && *str != '=')
 		return 0;
+
+	if (*str)
+		printk(KERN_WARNING
+			"WARNING: \"rootwait=1\" is deprecated, "
+			"use \"rootwait\" instead.\n");
+
 	root_wait = 1;
 	return 1;
 }
diff -urN linux-2.6.24.3/kernel/ptrace.c avr32-2.6/kernel/ptrace.c
--- linux-2.6.24.3/kernel/ptrace.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/kernel/ptrace.c	2008-04-23 20:12:47.000000000 +0200
@@ -470,6 +470,8 @@
 	lock_kernel();
 	if (request == PTRACE_TRACEME) {
 		ret = ptrace_traceme();
+		if (!ret)
+			arch_ptrace_attach(current);
 		goto out;
 	}
 
diff -urN linux-2.6.24.3/MAINTAINERS avr32-2.6/MAINTAINERS
--- linux-2.6.24.3/MAINTAINERS	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/MAINTAINERS	2008-04-23 20:12:35.000000000 +0200
@@ -671,6 +671,12 @@
 W:	http://www.at91.com/
 S:	Maintained
 
+ATMEL AT91 / AT32 SERIAL DRIVER
+P:	Haavard Skinnemoen
+M:	hskinnemoen@atmel.com
+L:	linux-kernel@vger.kernel.org
+S:	Supported
+
 ATMEL LCDFB DRIVER
 P:	Nicolas Ferre
 M:	nicolas.ferre@atmel.com
diff -urN linux-2.6.24.3/sound/avr32/ac97c.c avr32-2.6/sound/avr32/ac97c.c
--- linux-2.6.24.3/sound/avr32/ac97c.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/sound/avr32/ac97c.c	2008-04-23 19:33:54.000000000 +0200
@@ -0,0 +1,914 @@
+/*
+ * Driver for the Atmel AC97 controller
+ *
+ * Copyright (C) 2005-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/ac97_codec.h>
+#include <sound/memalloc.h>
+
+#include <asm/dma-controller.h>
+
+#include "ac97c.h"
+
+/* Serialize access to opened */
+static DEFINE_MUTEX(opened_mutex);
+
+struct atmel_ac97_dma_info {
+	struct dma_request_cyclic req_tx;
+	struct dma_request_cyclic req_rx;
+	unsigned short rx_periph_id;
+	unsigned short tx_periph_id;
+};
+
+struct atmel_ac97 {
+	/* Serialize access to opened */
+	spinlock_t lock;
+	void __iomem *regs;
+	struct snd_pcm_substream *playback_substream;
+	struct snd_pcm_substream *capture_substream;
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	struct snd_ac97 *ac97;
+	struct snd_ac97_bus *ac97_bus;
+	int opened;
+	int period;
+	u64 cur_format;
+	unsigned int cur_rate;
+	struct clk *mck;
+	struct platform_device *pdev;
+	struct atmel_ac97_dma_info dma;
+};
+
+#define get_chip(card) ((struct atmel_ac97 *)(card)->private_data)
+
+#define ac97c_writel(chip, reg, val)			\
+	__raw_writel((val), (chip)->regs + AC97C_##reg)
+#define ac97c_readl(chip, reg)				\
+	__raw_readl((chip)->regs + AC97C_##reg)
+
+/*
+ * PCM part
+ */
+static struct snd_pcm_hardware snd_atmel_ac97_playback_hw = {
+	.info			= (SNDRV_PCM_INFO_INTERLEAVED
+				  | SNDRV_PCM_INFO_MMAP
+				  | SNDRV_PCM_INFO_MMAP_VALID
+				  | SNDRV_PCM_INFO_BLOCK_TRANSFER
+				  | SNDRV_PCM_INFO_JOINT_DUPLEX),
+	.formats		= (SNDRV_PCM_FMTBIT_S16_BE
+				  | SNDRV_PCM_FMTBIT_S16_LE),
+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
+	.rate_min		= 4000,
+	.rate_max		= 48000,
+	.channels_min		= 1,
+	.channels_max		= 6,
+	.buffer_bytes_max	= 64*1024,
+	.period_bytes_min	= 512,
+	.period_bytes_max	= 4095,
+	.periods_min		= 8,
+	.periods_max		= 1024,
+};
+
+static struct snd_pcm_hardware snd_atmel_ac97_capture_hw = {
+	.info			= (SNDRV_PCM_INFO_INTERLEAVED
+				  | SNDRV_PCM_INFO_MMAP
+				  | SNDRV_PCM_INFO_MMAP_VALID
+				  | SNDRV_PCM_INFO_BLOCK_TRANSFER
+				  | SNDRV_PCM_INFO_JOINT_DUPLEX),
+	.formats		= (SNDRV_PCM_FMTBIT_S16_BE
+				  | SNDRV_PCM_FMTBIT_S16_LE),
+	.rates			= (SNDRV_PCM_RATE_CONTINUOUS),
+	.rate_min		= 4000,
+	.rate_max		= 48000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= 64*1024,
+	.period_bytes_min	= 512,
+	.period_bytes_max	= 4095,
+	.periods_min		= 8,
+	.periods_max		= 1024,
+};
+
+/*
+ * PCM functions
+ */
+static int
+snd_atmel_ac97_playback_open(struct snd_pcm_substream *substream)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	mutex_lock(&opened_mutex);
+	chip->opened++;
+	runtime->hw = snd_atmel_ac97_playback_hw;
+	if (chip->cur_rate) {
+		runtime->hw.rate_min = chip->cur_rate;
+		runtime->hw.rate_max = chip->cur_rate;
+	}
+	if (chip->cur_format)
+		runtime->hw.formats = (1ULL << chip->cur_format);
+	mutex_unlock(&opened_mutex);
+	chip->playback_substream = substream;
+	chip->period = 0;
+	return 0;
+}
+
+static int
+snd_atmel_ac97_capture_open(struct snd_pcm_substream *substream)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	mutex_lock(&opened_mutex);
+	chip->opened++;
+	runtime->hw = snd_atmel_ac97_capture_hw;
+	if (chip->cur_rate) {
+		runtime->hw.rate_min = chip->cur_rate;
+		runtime->hw.rate_max = chip->cur_rate;
+	}
+	if (chip->cur_format)
+		runtime->hw.formats = (1ULL << chip->cur_format);
+	mutex_unlock(&opened_mutex);
+	chip->capture_substream = substream;
+	chip->period = 0;
+	return 0;
+}
+
+static int snd_atmel_ac97_playback_close(struct snd_pcm_substream *substream)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	mutex_lock(&opened_mutex);
+	chip->opened--;
+	if (!chip->opened) {
+		chip->cur_rate = 0;
+		chip->cur_format = 0;
+	}
+	mutex_unlock(&opened_mutex);
+	return 0;
+}
+
+static int snd_atmel_ac97_capture_close(struct snd_pcm_substream *substream)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	mutex_lock(&opened_mutex);
+	chip->opened--;
+	if (!chip->opened) {
+		chip->cur_rate = 0;
+		chip->cur_format = 0;
+	}
+	mutex_unlock(&opened_mutex);
+	return 0;
+}
+
+static int
+snd_atmel_ac97_playback_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *hw_params)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	int err;
+
+	err = snd_pcm_lib_malloc_pages(substream,
+					params_buffer_bytes(hw_params));
+	if (err < 0)
+		return err;
+
+	/* Set restrictions to params */
+	mutex_lock(&opened_mutex);
+	chip->cur_rate = params_rate(hw_params);
+	chip->cur_format = params_format(hw_params);
+	mutex_unlock(&opened_mutex);
+
+	return 0;
+}
+
+static int
+snd_atmel_ac97_capture_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *hw_params)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	int err;
+
+	err = snd_pcm_lib_malloc_pages(substream,
+					params_buffer_bytes(hw_params));
+	if (err < 0)
+		return err;
+
+	/* Set restrictions to params */
+	mutex_lock(&opened_mutex);
+	chip->cur_rate = params_rate(hw_params);
+	chip->cur_format = params_format(hw_params);
+	mutex_unlock(&opened_mutex);
+
+	return 0;
+}
+
+static int snd_atmel_ac97_playback_hw_free(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static int snd_atmel_ac97_capture_hw_free(struct snd_pcm_substream *substream)
+{
+
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static int snd_atmel_ac97_playback_prepare(struct snd_pcm_substream *substream)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	struct platform_device *pdev = chip->pdev;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int block_size = frames_to_bytes(runtime, runtime->period_size);
+	unsigned long word = 0;
+	unsigned long buffer_size = 0;
+
+	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
+			block_size * 2, DMA_TO_DEVICE);
+
+	/* Assign slots to channels */
+	switch (substream->runtime->channels) {
+	case 1:
+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
+		break;
+	case 2:
+		/* Assign Left and Right slot to Channel A */
+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
+			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
+		break;
+	default:
+		/* TODO: support more than two channels */
+		return -EINVAL;
+		break;
+	}
+	ac97c_writel(chip, OCA, word);
+
+	/* Configure sample format and size */
+	word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
+
+	switch (runtime->format) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		word |= AC97C_CMR_CEM_LITTLE;
+		break;
+	case SNDRV_PCM_FORMAT_S16_BE: /* fall through */
+	default:
+		word &= ~AC97C_CMR_CEM_LITTLE;
+		break;
+	}
+
+	ac97c_writel(chip, CAMR, word);
+
+	/* Set variable rate if needed */
+	if (runtime->rate != 48000) {
+		word = ac97c_readl(chip, MR);
+		word |= AC97C_MR_VRA;
+		ac97c_writel(chip, MR, word);
+	} else {
+		/* Clear Variable Rate Bit */
+		word = ac97c_readl(chip, MR);
+		word &= ~AC97C_MR_VRA;
+		ac97c_writel(chip, MR, word);
+	}
+
+	/* Set rate */
+	snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate);
+
+	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
+		runtime->periods;
+
+	chip->dma.req_tx.buffer_size = buffer_size;
+	chip->dma.req_tx.periods = runtime->periods;
+
+	BUG_ON(chip->dma.req_tx.buffer_size !=
+			(chip->dma.req_tx.periods *
+			 frames_to_bytes(runtime, runtime->period_size)));
+
+	chip->dma.req_tx.buffer_start = runtime->dma_addr;
+	chip->dma.req_tx.data_reg = (dma_addr_t)(chip->regs + AC97C_CATHR + 2);
+	chip->dma.req_tx.periph_id = chip->dma.tx_periph_id;
+	chip->dma.req_tx.direction = DMA_DIR_MEM_TO_PERIPH;
+	chip->dma.req_tx.width = DMA_WIDTH_16BIT;
+	chip->dma.req_tx.dev_id = chip;
+
+	return 0;
+}
+
+static int snd_atmel_ac97_capture_prepare(struct snd_pcm_substream *substream)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	struct platform_device *pdev = chip->pdev;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int block_size = frames_to_bytes(runtime, runtime->period_size);
+	unsigned long word = 0;
+	unsigned long buffer_size = 0;
+
+	dma_sync_single_for_device(&pdev->dev, runtime->dma_addr,
+			block_size * 2, DMA_FROM_DEVICE);
+
+	/* Assign slots to channels */
+	switch (substream->runtime->channels) {
+	case 1:
+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A);
+		break;
+	case 2:
+		/* Assign Left and Right slot to Channel A */
+		word |= AC97C_CH_ASSIGN(PCM_LEFT, A)
+			| AC97C_CH_ASSIGN(PCM_RIGHT, A);
+		break;
+	default:
+		/* TODO: support more than two channels */
+		return -EINVAL;
+		break;
+	}
+	ac97c_writel(chip, ICA, word);
+
+	/* Configure sample format and size */
+	word = AC97C_CMR_PDCEN | AC97C_CMR_SIZE_16;
+
+	switch (runtime->format) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		word |= AC97C_CMR_CEM_LITTLE;
+		break;
+	case SNDRV_PCM_FORMAT_S16_BE:
+	default:
+		word &= ~(AC97C_CMR_CEM_LITTLE);
+		break;
+	}
+
+	ac97c_writel(chip, CAMR, word);
+
+	/* Set variable rate if needed */
+	if (runtime->rate != 48000) {
+		word = ac97c_readl(chip, MR);
+		word |= AC97C_MR_VRA;
+		ac97c_writel(chip, MR, word);
+	} else {
+		/* Clear Variable Rate Bit */
+		word = ac97c_readl(chip, MR);
+		word &= ~(AC97C_MR_VRA);
+		ac97c_writel(chip, MR, word);
+	}
+
+	/* Set rate */
+	snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
+
+	buffer_size = frames_to_bytes(runtime, runtime->period_size) *
+		runtime->periods;
+
+	chip->dma.req_rx.buffer_size = buffer_size;
+	chip->dma.req_rx.periods = runtime->periods;
+
+	BUG_ON(chip->dma.req_rx.buffer_size !=
+			(chip->dma.req_rx.periods *
+			 frames_to_bytes(runtime, runtime->period_size)));
+
+	chip->dma.req_rx.buffer_start = runtime->dma_addr;
+	chip->dma.req_rx.data_reg = (dma_addr_t)(chip->regs + AC97C_CARHR + 2);
+	chip->dma.req_rx.periph_id = chip->dma.rx_periph_id;
+	chip->dma.req_rx.direction = DMA_DIR_PERIPH_TO_MEM;
+	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
+	chip->dma.req_rx.dev_id = chip;
+
+	return 0;
+}
+
+	static int
+snd_atmel_ac97_playback_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	unsigned long camr;
+	int flags, err = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	camr = ac97c_readl(chip, CAMR);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		err = dma_prepare_request_cyclic(chip->dma.req_tx.req.dmac,
+				&chip->dma.req_tx);
+		dma_start_request(chip->dma.req_tx.req.dmac,
+				chip->dma.req_tx.req.channel);
+		camr |= AC97C_CMR_CENA;
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		err = dma_stop_request(chip->dma.req_tx.req.dmac,
+				chip->dma.req_tx.req.channel);
+		if (chip->opened <= 1)
+			camr &= ~AC97C_CMR_CENA;
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+	ac97c_writel(chip, CAMR, camr);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+	return err;
+}
+
+	static int
+snd_atmel_ac97_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	unsigned long camr;
+	int flags, err = 0;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	camr = ac97c_readl(chip, CAMR);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		err = dma_prepare_request_cyclic(chip->dma.req_rx.req.dmac,
+				&chip->dma.req_rx);
+		dma_start_request(chip->dma.req_rx.req.dmac,
+				chip->dma.req_rx.req.channel);
+		camr |= AC97C_CMR_CENA;
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		err = dma_stop_request(chip->dma.req_rx.req.dmac,
+				chip->dma.req_rx.req.channel);
+		mutex_lock(&opened_mutex);
+		if (chip->opened <= 1)
+			camr &= ~AC97C_CMR_CENA;
+		mutex_unlock(&opened_mutex);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+	ac97c_writel(chip, CAMR, camr);
+
+	spin_unlock_irqrestore(&chip->lock, flags);
+	return err;
+}
+
+	static snd_pcm_uframes_t
+snd_atmel_ac97_playback_pointer(struct snd_pcm_substream *substream)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	snd_pcm_uframes_t pos;
+	unsigned long bytes;
+
+	bytes = (dma_get_current_pos
+			(chip->dma.req_tx.req.dmac,
+			 chip->dma.req_tx.req.channel) - runtime->dma_addr);
+	pos = bytes_to_frames(runtime, bytes);
+	if (pos >= runtime->buffer_size)
+		pos -= runtime->buffer_size;
+
+	return pos;
+}
+
+	static snd_pcm_uframes_t
+snd_atmel_ac97_capture_pointer(struct snd_pcm_substream *substream)
+{
+	struct atmel_ac97 *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	snd_pcm_uframes_t pos;
+	unsigned long bytes;
+
+	bytes = (dma_get_current_pos
+			(chip->dma.req_rx.req.dmac,
+			 chip->dma.req_rx.req.channel)
+			- runtime->dma_addr);
+	pos = bytes_to_frames(runtime, bytes);
+	if (pos >= runtime->buffer_size)
+		pos -= runtime->buffer_size;
+
+
+	return pos;
+}
+
+static struct snd_pcm_ops atmel_ac97_playback_ops = {
+	.open		= snd_atmel_ac97_playback_open,
+	.close		= snd_atmel_ac97_playback_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= snd_atmel_ac97_playback_hw_params,
+	.hw_free	= snd_atmel_ac97_playback_hw_free,
+	.prepare	= snd_atmel_ac97_playback_prepare,
+	.trigger	= snd_atmel_ac97_playback_trigger,
+	.pointer	= snd_atmel_ac97_playback_pointer,
+};
+
+static struct snd_pcm_ops atmel_ac97_capture_ops = {
+	.open		= snd_atmel_ac97_capture_open,
+	.close		= snd_atmel_ac97_capture_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= snd_atmel_ac97_capture_hw_params,
+	.hw_free	= snd_atmel_ac97_capture_hw_free,
+	.prepare	= snd_atmel_ac97_capture_prepare,
+	.trigger	= snd_atmel_ac97_capture_trigger,
+	.pointer	= snd_atmel_ac97_capture_pointer,
+};
+
+static struct ac97_pcm atmel_ac97_pcm_defs[] __devinitdata = {
+	/* Playback */
+	{
+		.exclusive = 1,
+		.r = { {
+			.slots = ((1 << AC97_SLOT_PCM_LEFT)
+					| (1 << AC97_SLOT_PCM_RIGHT)
+					| (1 << AC97_SLOT_PCM_CENTER)
+					| (1 << AC97_SLOT_PCM_SLEFT)
+					| (1 << AC97_SLOT_PCM_SRIGHT)
+					| (1 << AC97_SLOT_LFE)),
+		} }
+	},
+	/* PCM in */
+	{
+		.stream = 1,
+		.exclusive = 1,
+		.r = { {
+			.slots = ((1 << AC97_SLOT_PCM_LEFT)
+					| (1 << AC97_SLOT_PCM_RIGHT)),
+		} }
+	},
+	/* Mic in */
+	{
+		.stream = 1,
+		.exclusive = 1,
+		.r = { {
+			.slots = (1<<AC97_SLOT_MIC),
+		} }
+	},
+};
+
+static int __devinit snd_atmel_ac97_pcm_new(struct atmel_ac97 *chip)
+{
+	struct snd_pcm *pcm;
+	int err;
+
+	err = snd_ac97_pcm_assign(chip->ac97_bus,
+			ARRAY_SIZE(atmel_ac97_pcm_defs),
+			atmel_ac97_pcm_defs);
+	if (err)
+		return err;
+
+	err = snd_pcm_new(chip->card, "Atmel-AC97", 0, 1, 1, &pcm);
+	if (err)
+		return err;
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK,
+			&atmel_ac97_playback_ops);
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+			&atmel_ac97_capture_ops);
+
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+			&chip->pdev->dev,
+			128 * 1024, 128 * 1024);
+
+	pcm->private_data = chip;
+	pcm->info_flags = 0;
+	strcpy(pcm->name, "Atmel-AC97");
+	chip->pcm = pcm;
+
+	return 0;
+}
+
+/*
+ * Mixer part.
+ */
+static int snd_atmel_ac97_mixer_new(struct atmel_ac97 *chip)
+{
+	int err;
+	struct snd_ac97_template template;
+
+	memset(&template, 0, sizeof(template));
+	template.private_data = chip;
+	err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97);
+
+	return err;
+}
+
+static void atmel_ac97_error(struct dma_request *_req)
+{
+	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
+	struct atmel_ac97 *chip = req->dev_id;
+
+	dev_dbg(&chip->pdev->dev, "DMA Controller error, channel %d\n",
+			req->req.channel);
+}
+
+static void atmel_ac97_block_complete(struct dma_request *_req)
+{
+	struct dma_request_cyclic *req = to_dma_request_cyclic(_req);
+	struct atmel_ac97 *chip = req->dev_id;
+	if (req->periph_id == chip->dma.tx_periph_id)
+		snd_pcm_period_elapsed(chip->playback_substream);
+	else
+		snd_pcm_period_elapsed(chip->capture_substream);
+}
+
+/*
+ * Codec part.
+ */
+static void snd_atmel_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+		unsigned short val)
+{
+	struct atmel_ac97 *chip = get_chip(ac97);
+	unsigned long word;
+	int timeout = 40;
+
+	word = (reg & 0x7f) << 16 | val;
+
+	do {
+		if (ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) {
+			ac97c_writel(chip, COTHR, word);
+			return;
+		}
+		udelay(1);
+	} while (--timeout);
+
+	dev_dbg(&chip->pdev->dev, "codec write timeout\n");
+}
+
+static unsigned short snd_atmel_ac97_read(struct snd_ac97 *ac97,
+		unsigned short reg)
+{
+	struct atmel_ac97 *chip = get_chip(ac97);
+	unsigned long word;
+	int timeout = 40;
+	int write = 10;
+
+	word = (0x80 | (reg & 0x7f)) << 16;
+
+	if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0)
+		ac97c_readl(chip, CORHR);
+
+retry_write:
+	timeout = 40;
+
+	do {
+		if ((ac97c_readl(chip, COSR) & AC97C_CSR_TXRDY) != 0) {
+			ac97c_writel(chip, COTHR, word);
+			goto read_reg;
+		}
+		mdelay(10);
+	} while (--timeout);
+
+	if (!--write)
+		goto timed_out;
+	goto retry_write;
+
+read_reg:
+	do {
+		if ((ac97c_readl(chip, COSR) & AC97C_CSR_RXRDY) != 0) {
+			unsigned short val = ac97c_readl(chip, CORHR);
+			return val;
+		}
+		mdelay(10);
+	} while (--timeout);
+
+	if (!--write)
+		goto timed_out;
+	goto retry_write;
+
+timed_out:
+	dev_dbg(&chip->pdev->dev, "codec read timeout\n");
+	return 0xffff;
+}
+
+static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
+{
+	ac97c_writel(chip, MR, AC97C_MR_WRST);
+	mdelay(1);
+	ac97c_writel(chip, MR, AC97C_MR_ENA);
+}
+
+static void snd_atmel_ac97_destroy(struct snd_card *card)
+{
+	struct atmel_ac97 *chip = get_chip(card);
+
+	if (chip->regs)
+		iounmap(chip->regs);
+
+	if (chip->mck) {
+		clk_disable(chip->mck);
+		clk_put(chip->mck);
+	}
+
+	if (chip->dma.req_tx.req.dmac) {
+		dma_release_channel(chip->dma.req_tx.req.dmac,
+				chip->dma.req_tx.req.channel);
+	}
+	if (chip->dma.req_rx.req.dmac) {
+		dma_release_channel(chip->dma.req_rx.req.dmac,
+				chip->dma.req_rx.req.channel);
+	}
+}
+
+static int __devinit snd_atmel_ac97_create(struct snd_card *card,
+		struct platform_device *pdev)
+{
+	static struct snd_ac97_bus_ops ops = {
+		.write	= snd_atmel_ac97_write,
+		.read	= snd_atmel_ac97_read,
+	};
+	struct atmel_ac97 *chip = get_chip(card);
+	struct resource *regs;
+	struct clk *mck;
+	int err;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+
+	mck = clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(mck))
+		return PTR_ERR(mck);
+	clk_enable(mck);
+	chip->mck = mck;
+
+	card->private_free = snd_atmel_ac97_destroy;
+
+	spin_lock_init(&chip->lock);
+	chip->card = card;
+	chip->pdev = pdev;
+
+	chip->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!chip->regs)
+		return -ENOMEM;
+
+	snd_card_set_dev(card, &pdev->dev);
+
+	err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus);
+
+	return err;
+}
+
+static int __devinit snd_atmel_ac97_probe(struct platform_device *pdev)
+{
+	static int dev;
+	struct snd_card *card;
+	struct atmel_ac97 *chip;
+	int err;
+	int ch;
+
+	mutex_init(&opened_mutex);
+
+	err = -ENOMEM;
+	card = snd_card_new(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+			THIS_MODULE, sizeof(struct atmel_ac97));
+	if (!card)
+		goto out;
+	chip = get_chip(card);
+
+	err = snd_atmel_ac97_create(card, pdev);
+	if (err)
+		goto out_free_card;
+
+	snd_atmel_ac97_reset(chip);
+
+	err = snd_atmel_ac97_mixer_new(chip);
+	if (err)
+		goto out_free_card;
+
+	err = snd_atmel_ac97_pcm_new(chip);
+	if (err)
+		goto out_free_card;
+
+	/* TODO: Get this information from the platform device */
+	chip->dma.req_tx.req.dmac = find_dma_controller(0);
+	if (!chip->dma.req_tx.req.dmac) {
+		dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
+		err = -ENODEV;
+		goto out_free_card;
+	}
+	chip->dma.req_rx.req.dmac = find_dma_controller(0);
+	if (!chip->dma.req_rx.req.dmac) {
+		dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
+		err = -ENODEV;
+		goto out_free_card;
+	}
+
+	chip->dma.rx_periph_id = 3;
+	chip->dma.tx_periph_id = 4;
+
+	ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
+	if (ch < 0) {
+		dev_dbg(&chip->pdev->dev,
+				"could not allocate TX DMA channel\n");
+		err = ch;
+		goto out_free_card;
+	}
+	chip->dma.req_tx.req.channel = ch;
+	chip->dma.req_tx.width = DMA_WIDTH_16BIT;
+	chip->dma.req_tx.req.block_complete = atmel_ac97_block_complete;
+	chip->dma.req_tx.req.error = atmel_ac97_error;
+
+	ch = dma_alloc_channel(chip->dma.req_rx.req.dmac);
+	if (ch < 0) {
+		dev_dbg(&chip->pdev->dev,
+				"could not allocate RX DMA channel\n");
+		err = ch;
+		goto out_free_card;
+	}
+	chip->dma.req_rx.req.channel = ch;
+	chip->dma.req_rx.width = DMA_WIDTH_16BIT;
+	chip->dma.req_rx.req.block_complete = atmel_ac97_block_complete;
+	chip->dma.req_rx.req.error = atmel_ac97_error;
+
+	strcpy(card->driver, "atmel_ac97c");
+	strcpy(card->shortname, "atmel_ac97c");
+	sprintf(card->longname, "Atmel AVR32 AC97 controller");
+
+	err = snd_card_register(card);
+	if (err)
+		goto out_free_card;
+
+	platform_set_drvdata(pdev, card);
+	dev++;
+
+	dev_info(&pdev->dev, "Atmel AVR32 AC97 controller at 0x%p\n",
+			chip->regs);
+
+	return 0;
+
+out_free_card:
+	snd_card_free(card);
+out:
+	return err;
+}
+
+#ifdef CONFIG_PM
+	static int
+snd_atmel_ac97_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+	struct snd_card *card = platform_get_drvdata(pdev);
+	struct atmel_ac97 *chip = card->private_data;
+
+	clk_disable(chip->mck);
+
+	return 0;
+}
+
+static int snd_atmel_ac97_resume(struct platform_device *pdev)
+{
+	struct snd_card *card = dev_get_drvdata(pdev);
+	struct atmel_ac97 *chip = card->private_data;
+
+	clk_enable(chip->mck);
+
+	return 0;
+}
+#else
+#define snd_atmel_ac97_suspend NULL
+#define snd_atmel_ac97_resume NULL
+#endif
+
+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
+{
+	struct snd_card *card = platform_get_drvdata(pdev);
+
+	snd_card_free(card);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver atmel_ac97_driver = {
+	.remove		= __devexit_p(snd_atmel_ac97_remove),
+	.driver		= {
+		.name	= "atmel_ac97c",
+	},
+	.suspend	= snd_atmel_ac97_suspend,
+	.resume		= snd_atmel_ac97_resume,
+};
+
+static int __init atmel_ac97_init(void)
+{
+	return platform_driver_probe(&atmel_ac97_driver,
+			snd_atmel_ac97_probe);
+}
+module_init(atmel_ac97_init);
+
+static void __exit atmel_ac97_exit(void)
+{
+	platform_driver_unregister(&atmel_ac97_driver);
+}
+module_exit(atmel_ac97_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for Atmel AC97 Controller");
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
diff -urN linux-2.6.24.3/sound/avr32/ac97c.h avr32-2.6/sound/avr32/ac97c.h
--- linux-2.6.24.3/sound/avr32/ac97c.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/sound/avr32/ac97c.h	2008-04-23 19:33:54.000000000 +0200
@@ -0,0 +1,71 @@
+/*
+ * Register definitions for the Atmel AC97 Controller.
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SOUND_AVR32_AC97C_H
+#define __SOUND_AVR32_AC97C_H
+
+#define AC97C_MR		0x08
+#define AC97C_ICA		0x10
+#define AC97C_OCA		0x14
+#define AC97C_CARHR		0x20
+#define AC97C_CATHR		0x24
+#define AC97C_CASR		0x28
+#define AC97C_CAMR		0x2c
+#define AC97C_CBRHR		0x30
+#define AC97C_CBTHR		0x34
+#define AC97C_CBSR		0x38
+#define AC97C_CBMR		0x3c
+#define AC97C_CORHR		0x40
+#define AC97C_COTHR		0x44
+#define AC97C_COSR		0x48
+#define AC97C_COMR		0x4c
+#define AC97C_SR		0x50
+#define AC97C_IER		0x54
+#define AC97C_IDR		0x58
+#define AC97C_IMR		0x5c
+#define AC97C_VERSION		0xfc
+
+#define AC97C_CATPR		PDC_TPR
+#define AC97C_CATCR		PDC_TCR
+#define AC97C_CATNPR		PDC_TNPR
+#define AC97C_CATNCR		PDC_TNCR
+#define AC97C_CARPR		PDC_RPR
+#define AC97C_CARCR		PDC_RCR
+#define AC97C_CARNPR		PDC_RNPR
+#define AC97C_CARNCR		PDC_RNCR
+#define AC97C_PTCR		PDC_PTCR
+
+#define AC97C_MR_ENA		(1 << 0)
+#define AC97C_MR_WRST		(1 << 1)
+#define AC97C_MR_VRA		(1 << 2)
+
+#define AC97C_CSR_TXRDY		(1 << 0)
+#define AC97C_CSR_UNRUN		(1 << 2)
+#define AC97C_CSR_RXRDY		(1 << 4)
+#define AC97C_CSR_ENDTX		(1 << 10)
+#define AC97C_CSR_ENDRX		(1 << 14)
+
+#define AC97C_CMR_SIZE_20	(0 << 16)
+#define AC97C_CMR_SIZE_18	(1 << 16)
+#define AC97C_CMR_SIZE_16	(2 << 16)
+#define AC97C_CMR_SIZE_10	(3 << 16)
+#define AC97C_CMR_CEM_LITTLE	(1 << 18)
+#define AC97C_CMR_CEM_BIG	(0 << 18)
+#define AC97C_CMR_CENA		(1 << 21)
+#define AC97C_CMR_PDCEN		(1 << 22)
+
+#define AC97C_SR_CAEVT		(1 << 3)
+
+#define AC97C_CH_ASSIGN(slot, channel)					\
+	(AC97C_CHANNEL_##channel << (3 * (AC97_SLOT_##slot - 3)))
+#define AC97C_CHANNEL_NONE	0x0
+#define AC97C_CHANNEL_A		0x1
+#define AC97C_CHANNEL_B		0x2
+
+#endif /* __SOUND_AVR32_AC97C_H */
diff -urN linux-2.6.24.3/sound/avr32/Kconfig avr32-2.6/sound/avr32/Kconfig
--- linux-2.6.24.3/sound/avr32/Kconfig	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/sound/avr32/Kconfig	2008-04-23 19:33:54.000000000 +0200
@@ -0,0 +1,11 @@
+menu "AVR32 devices"
+	depends on SND != n && AVR32
+
+config SND_ATMEL_AC97
+	tristate "Atmel AC97 Controller Driver"
+	select SND_PCM
+	select SND_AC97_CODEC
+	help
+	  ALSA sound driver for the Atmel AC97 controller.
+
+endmenu
diff -urN linux-2.6.24.3/sound/avr32/Makefile avr32-2.6/sound/avr32/Makefile
--- linux-2.6.24.3/sound/avr32/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/sound/avr32/Makefile	2008-04-23 19:33:54.000000000 +0200
@@ -0,0 +1,3 @@
+snd-atmel-ac97-objs		:= ac97c.o
+
+obj-$(CONFIG_SND_ATMEL_AC97)	+= snd-atmel-ac97.o
diff -urN linux-2.6.24.3/sound/Kconfig avr32-2.6/sound/Kconfig
--- linux-2.6.24.3/sound/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/sound/Kconfig	2008-04-23 19:33:54.000000000 +0200
@@ -63,6 +63,8 @@
 
 source "sound/arm/Kconfig"
 
+source "sound/avr32/Kconfig"
+
 if SPI
 source "sound/spi/Kconfig"
 endif
diff -urN linux-2.6.24.3/sound/Makefile avr32-2.6/sound/Makefile
--- linux-2.6.24.3/sound/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/sound/Makefile	2008-04-23 19:33:54.000000000 +0200
@@ -6,7 +6,7 @@
 obj-$(CONFIG_SOUND_PRIME) += oss/
 obj-$(CONFIG_DMASOUND) += oss/
 obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
-	sparc/ spi/ parisc/ pcmcia/ mips/ soc/
+	sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
 obj-$(CONFIG_SND_AOA) += aoa/
 
 # This one must be compilable even if sound is configured out
diff -urN linux-2.6.24.3/sound/oss/at32_abdac.c avr32-2.6/sound/oss/at32_abdac.c
--- linux-2.6.24.3/sound/oss/at32_abdac.c	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/sound/oss/at32_abdac.c	2008-04-23 19:33:54.000000000 +0200
@@ -0,0 +1,722 @@
+/*
+ * OSS Sound Driver for the Atmel AT32 on-chip DAC.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sound.h>
+#include <linux/soundcard.h>
+
+#include <asm/byteorder.h>
+#include <asm/dma-controller.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+/* We want to use the "bizarre" swap-bytes-in-each-halfword macro */
+#include <linux/byteorder/swabb.h>
+
+#include "at32_abdac.h"
+
+#define DMA_BUFFER_SIZE	32768
+#define DMA_PERIOD_SHIFT 10
+#define DMA_PERIOD_SIZE (1 << DMA_PERIOD_SHIFT)
+#define DMA_WRITE_THRESHOLD DMA_PERIOD_SIZE
+
+struct sound_settings {
+	unsigned int format;
+	unsigned int channels;
+	unsigned int sample_rate;
+	/* log2(bytes per sample) */
+	unsigned int input_order;
+};
+
+struct at32_dac {
+	spinlock_t lock;
+	void __iomem *regs;
+
+	/* head and tail refer to number of words */
+	struct {
+		u32 *buf;
+		int head;
+		int tail;
+	} dma;
+
+	struct semaphore sem;
+	wait_queue_head_t write_wait;
+
+	/*
+	 * Read at most ucount bytes from ubuf, translate to 2-channel
+	 * signed 16-bit big endian format and write to the DMA buffer
+	 * as long as there is room left.  Return the number of bytes
+	 * successfully copied from ubuf, or -EFAULT if the first
+	 * sample from ubuf couldn't be read.  This function is not
+	 * called unless there is room for at least one sample (4
+	 * bytes) in the DMA buffer.
+	 */
+	ssize_t (*trans)(struct at32_dac *dac, const char __user *ubuf,
+			 size_t ucount);
+
+	struct sound_settings dsp_settings;
+	struct dma_request_cyclic req;
+
+	struct clk *mck;
+	struct clk *sample_clk;
+	struct platform_device *pdev;
+	int busy;
+	int playing;
+	int dev_dsp;
+};
+static struct at32_dac *the_dac;
+
+static inline unsigned int abdac_get_head(struct at32_dac *dac)
+{
+	return dac->dma.head & ((DMA_BUFFER_SIZE / 4) - 1);
+}
+
+static inline unsigned int abdac_get_tail(struct at32_dac *dac)
+{
+	return dac->dma.tail & ((DMA_BUFFER_SIZE / 4) - 1);
+}
+
+static inline unsigned int abdac_dma_space(struct at32_dac *dac)
+{
+	unsigned int space;
+
+	space = ((dac->dma.tail - dac->dma.head - 1)
+		 & ((DMA_BUFFER_SIZE / 4) - 1));
+	return space;
+}
+
+static void abdac_update_dma_tail(struct at32_dac *dac)
+{
+	dma_addr_t dma_addr;
+	unsigned int new_tail;
+
+	if (dac->playing) {
+		dma_addr = dma_get_current_pos(dac->req.req.dmac,
+					       dac->req.req.channel);
+		new_tail = (dma_addr - dac->req.buffer_start) / 4;
+		if (new_tail >= dac->dma.head
+		    && (dac->dma.tail < dac->dma.head
+			|| dac->dma.tail > new_tail))
+			dev_notice(&dac->pdev->dev, "DMA underrun detected!\n");
+		dac->dma.tail = new_tail;
+		dev_dbg(&dac->pdev->dev, "update tail: 0x%x - 0x%x = %u\n",
+			dma_addr, dac->req.buffer_start, dac->dma.tail);
+	}
+}
+
+static int abdac_start(struct at32_dac *dac)
+{
+	int ret;
+
+	if (dac->playing)
+		return 0;
+
+	memset(dac->dma.buf, 0, DMA_BUFFER_SIZE);
+
+	clk_enable(dac->sample_clk);
+
+	ret = dma_prepare_request_cyclic(dac->req.req.dmac, &dac->req);
+	if (ret)
+		goto out_stop_clock;
+
+	dev_dbg(&dac->pdev->dev, "starting DMA...\n");
+	ret = dma_start_request(dac->req.req.dmac, dac->req.req.channel);
+	if (ret)
+		goto out_stop_request;
+
+	dac_writel(dac, CTRL, DAC_BIT(EN));
+	dac->playing = 1;
+
+	return 0;
+
+out_stop_request:
+	dma_stop_request(dac->req.req.dmac,
+			 dac->req.req.channel);
+out_stop_clock:
+	clk_disable(dac->sample_clk);
+	return ret;
+}
+
+static int abdac_stop(struct at32_dac *dac)
+{
+	if (dac->playing) {
+		dma_stop_request(dac->req.req.dmac, dac->req.req.channel);
+		dac_writel(dac, DATA, 0);
+		dac_writel(dac, CTRL, 0);
+		dac->playing = 0;
+		clk_disable(dac->sample_clk);
+	}
+
+	return 0;
+}
+
+static int abdac_dma_prepare(struct at32_dac *dac)
+{
+	dac->dma.buf = dma_alloc_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
+					  &dac->req.buffer_start, GFP_KERNEL);
+	if (!dac->dma.buf)
+		return -ENOMEM;
+
+	dac->dma.head = dac->dma.tail = 0;
+	dac->req.periods = DMA_BUFFER_SIZE / DMA_PERIOD_SIZE;
+	dac->req.buffer_size = DMA_BUFFER_SIZE;
+
+	return 0;
+}
+
+static void abdac_dma_cleanup(struct at32_dac *dac)
+{
+	if (dac->dma.buf)
+		dma_free_coherent(&dac->pdev->dev, DMA_BUFFER_SIZE,
+				  dac->dma.buf, dac->req.buffer_start);
+	dac->dma.buf = NULL;
+}
+
+static void abdac_dma_block_complete(struct dma_request *req)
+{
+	struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
+	struct at32_dac *dac = container_of(creq, struct at32_dac, req);
+
+	wake_up(&dac->write_wait);
+}
+
+static void abdac_dma_error(struct dma_request *req)
+{
+	struct dma_request_cyclic *creq = to_dma_request_cyclic(req);
+	struct at32_dac *dac = container_of(creq, struct at32_dac, req);
+
+	dev_err(&dac->pdev->dev, "DMA error\n");
+}
+
+static irqreturn_t abdac_interrupt(int irq, void *dev_id)
+{
+	struct at32_dac *dac = dev_id;
+	u32 status;
+
+	status = dac_readl(dac, INT_STATUS);
+	if (status & DAC_BIT(UNDERRUN)) {
+		dev_err(&dac->pdev->dev, "Underrun detected!\n");
+		dac_writel(dac, INT_CLR, DAC_BIT(UNDERRUN));
+	} else {
+		dev_err(&dac->pdev->dev, "Spurious interrupt (status=0x%x)\n",
+			status);
+		dac_writel(dac, INT_CLR, status);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t trans_s16be(struct at32_dac *dac, const char __user *ubuf,
+			   size_t ucount)
+{
+	ssize_t ret;
+
+	if (dac->dsp_settings.channels == 2) {
+		const u32 __user *up = (const u32 __user *)ubuf;
+		u32 sample;
+
+		for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
+			if (!abdac_dma_space(dac))
+				break;
+
+			if (unlikely(__get_user(sample, up++))) {
+				if (ret == 0)
+					ret = -EFAULT;
+				break;
+			}
+			dac->dma.buf[abdac_get_head(dac)] = sample;
+			dac->dma.head++;
+		}
+	} else {
+		const u16 __user *up = (const u16 __user *)ubuf;
+		u16 sample;
+
+		for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
+			if (!abdac_dma_space(dac))
+				break;
+
+			if (unlikely(__get_user(sample, up++))) {
+				if (ret == 0)
+					ret = -EFAULT;
+				break;
+			}
+			dac->dma.buf[abdac_get_head(dac)]
+				= (sample << 16) | sample;
+			dac->dma.head++;
+		}
+	}
+
+	return ret;
+}
+
+static ssize_t trans_s16le(struct at32_dac *dac, const char __user *ubuf,
+			   size_t ucount)
+{
+	ssize_t ret;
+
+	if (dac->dsp_settings.channels == 2) {
+		const u32 __user *up = (const u32 __user *)ubuf;
+		u32 sample;
+
+		for (ret = 0; ret < (ssize_t)(ucount - 3); ret += 4) {
+			if (!abdac_dma_space(dac))
+				break;
+
+			if (unlikely(__get_user(sample, up++))) {
+				if (ret == 0)
+					ret = -EFAULT;
+				break;
+			}
+			/* Swap bytes in each halfword */
+			dac->dma.buf[abdac_get_head(dac)] = swahb32(sample);
+			dac->dma.head++;
+		}
+	} else {
+		const u16 __user *up = (const u16 __user *)ubuf;
+		u16 sample;
+
+		for (ret = 0; ret < (ssize_t)(ucount - 1); ret += 2) {
+			if (!abdac_dma_space(dac))
+				break;
+
+			if (unlikely(__get_user(sample, up++))) {
+				if (ret == 0)
+					ret = -EFAULT;
+				break;
+			}
+			sample = swab16(sample);
+			dac->dma.buf[abdac_get_head(dac)]
+				= (sample << 16) | sample;
+			dac->dma.head++;
+		}
+	}
+
+	return ret;
+}
+
+static ssize_t abdac_dma_translate_from_user(struct at32_dac *dac,
+					       const char __user *buffer,
+					       size_t count)
+{
+	/* At least one buffer must be available at this point */
+	dev_dbg(&dac->pdev->dev, "copying %zu bytes from user...\n", count);
+
+	return dac->trans(dac, buffer, count);
+}
+
+static int abdac_set_format(struct at32_dac *dac, int format)
+{
+	unsigned int order;
+
+	switch (format) {
+	case AFMT_S16_BE:
+		order = 1;
+		dac->trans = trans_s16be;
+		break;
+	case AFMT_S16_LE:
+		order = 1;
+		dac->trans = trans_s16le;
+		break;
+	default:
+		dev_dbg(&dac->pdev->dev, "unsupported format: %d\n", format);
+		return -EINVAL;
+	}
+
+	if (dac->dsp_settings.channels == 2)
+		order++;
+
+	dac->dsp_settings.input_order = order;
+	dac->dsp_settings.format = format;
+	return 0;
+}
+
+static int abdac_set_sample_rate(struct at32_dac *dac, unsigned long rate)
+{
+	unsigned long new_rate;
+	int ret;
+
+	ret = clk_set_rate(dac->sample_clk, 256 * rate);
+	if (ret < 0)
+		return ret;
+
+	/* TODO: mplayer seems to have a problem with this */
+#if 0
+	new_rate = clk_get_rate(dac->sample_clk);
+	dac->dsp_settings.sample_rate = new_rate / 256;
+#else
+	dac->dsp_settings.sample_rate = rate;
+#endif
+
+	return 0;
+}
+
+static ssize_t abdac_dsp_write(struct file *file,
+				 const char __user *buffer,
+				 size_t count, loff_t *ppos)
+{
+	struct at32_dac *dac = file->private_data;
+	DECLARE_WAITQUEUE(wait, current);
+	unsigned int avail;
+	ssize_t copied;
+	ssize_t ret;
+
+	/* Avoid address space checking in the translation functions */
+	if (!access_ok(buffer, count, VERIFY_READ))
+		return -EFAULT;
+
+	down(&dac->sem);
+
+	if (!dac->dma.buf) {
+		ret = abdac_dma_prepare(dac);
+		if (ret)
+			goto out;
+	}
+
+	add_wait_queue(&dac->write_wait, &wait);
+	ret = 0;
+	while (count > 0) {
+		do {
+			abdac_update_dma_tail(dac);
+			avail = abdac_dma_space(dac);
+			set_current_state(TASK_INTERRUPTIBLE);
+			if (avail >= DMA_WRITE_THRESHOLD)
+				break;
+
+			if (file->f_flags & O_NONBLOCK) {
+				if (!ret)
+					ret = -EAGAIN;
+				goto out;
+			}
+
+			pr_debug("Going to wait (avail = %u, count = %zu)\n",
+				 avail, count);
+
+			up(&dac->sem);
+			schedule();
+			if (signal_pending(current)) {
+				if (!ret)
+					ret = -ERESTARTSYS;
+				goto out_nosem;
+			}
+			down(&dac->sem);
+		} while (1);
+
+		copied = abdac_dma_translate_from_user(dac, buffer, count);
+		if (copied < 0) {
+			if (!ret)
+				ret = -EFAULT;
+			goto out;
+		}
+
+		abdac_start(dac);
+
+		count -= copied;
+		ret += copied;
+	}
+
+out:
+	up(&dac->sem);
+out_nosem:
+	remove_wait_queue(&dac->write_wait, &wait);
+	set_current_state(TASK_RUNNING);
+	return ret;
+}
+
+static int abdac_dsp_ioctl(struct inode *inode, struct file *file,
+			     unsigned int cmd, unsigned long arg)
+{
+	struct at32_dac *dac = file->private_data;
+	int __user *up = (int __user *)arg;
+	struct audio_buf_info abinfo;
+	int val, ret;
+
+	switch (cmd) {
+	case OSS_GETVERSION:
+		return put_user(SOUND_VERSION, up);
+
+	case SNDCTL_DSP_SPEED:
+		if (get_user(val, up))
+			return -EFAULT;
+		if (val >= 0) {
+			abdac_stop(dac);
+			ret = abdac_set_sample_rate(dac, val);
+			if (ret)
+				return ret;
+		}
+		return put_user(dac->dsp_settings.sample_rate, up);
+
+	case SNDCTL_DSP_STEREO:
+		if (get_user(val, up))
+			return -EFAULT;
+		abdac_stop(dac);
+		if (val && dac->dsp_settings.channels == 1)
+			dac->dsp_settings.input_order++;
+		else if (!val && dac->dsp_settings.channels != 1)
+			dac->dsp_settings.input_order--;
+		dac->dsp_settings.channels = val ? 2 : 1;
+		return 0;
+
+	case SNDCTL_DSP_CHANNELS:
+		if (get_user(val, up))
+			return -EFAULT;
+
+		if (val) {
+			if (val < 0 || val > 2)
+				return -EINVAL;
+
+			abdac_stop(dac);
+			dac->dsp_settings.input_order
+				+= val - dac->dsp_settings.channels;
+			dac->dsp_settings.channels = val;
+		}
+		return put_user(val, (int *)arg);
+
+	case SNDCTL_DSP_GETFMTS:
+		return put_user(AFMT_S16_BE | AFMT_S16_BE, up);
+
+	case SNDCTL_DSP_SETFMT:
+		if (get_user(val, up))
+			return -EFAULT;
+
+		if (val == AFMT_QUERY) {
+			val = dac->dsp_settings.format;
+		} else {
+			ret = abdac_set_format(dac, val);
+			if (ret)
+				return ret;
+		}
+		return put_user(val, up);
+
+	case SNDCTL_DSP_GETOSPACE:
+		abdac_update_dma_tail(dac);
+		abinfo.fragsize = ((1 << dac->dsp_settings.input_order)
+				   * (DMA_PERIOD_SIZE / 4));
+		abinfo.bytes = (abdac_dma_space(dac)
+				<< dac->dsp_settings.input_order);
+		abinfo.fragstotal = ((DMA_BUFFER_SIZE * 4)
+				     >> (DMA_PERIOD_SHIFT
+					 + dac->dsp_settings.input_order));
+		abinfo.fragments = ((abinfo.bytes
+				     >> dac->dsp_settings.input_order)
+				    / (DMA_PERIOD_SIZE / 4));
+		pr_debug("fragments=%d  fragstotal=%d  fragsize=%d bytes=%d\n",
+			 abinfo.fragments, abinfo.fragstotal, abinfo.fragsize,
+			 abinfo.bytes);
+		return copy_to_user(up, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
+
+	default:
+		dev_dbg(&dac->pdev->dev, "Unimplemented ioctl cmd: 0x%x\n", cmd);
+		return -EINVAL;
+	}
+}
+
+static int abdac_dsp_open(struct inode *inode, struct file *file)
+{
+	struct at32_dac *dac = the_dac;
+	int ret;
+
+	if (file->f_mode & FMODE_READ)
+		return -ENXIO;
+
+	down(&dac->sem);
+	ret = -EBUSY;
+	if (dac->busy)
+		goto out;
+
+	dac->dma.head = dac->dma.tail = 0;
+
+	/* FIXME: What are the correct defaults?  */
+	dac->dsp_settings.channels = 2;
+	abdac_set_format(dac, AFMT_S16_BE);
+	ret = abdac_set_sample_rate(dac, 8000);
+	if (ret)
+		goto out;
+
+	file->private_data = dac;
+	dac->busy = 1;
+
+	ret = 0;
+
+out:
+	up(&dac->sem);
+	return ret;
+}
+
+static int abdac_dsp_release(struct inode *inode, struct file *file)
+{
+	struct at32_dac *dac = file->private_data;
+
+	down(&dac->sem);
+
+	abdac_stop(dac);
+	abdac_dma_cleanup(dac);
+	dac->busy = 0;
+
+	up(&dac->sem);
+
+	return 0;
+}
+
+static struct file_operations abdac_dsp_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= abdac_dsp_write,
+	.ioctl		= abdac_dsp_ioctl,
+	.open		= abdac_dsp_open,
+	.release	= abdac_dsp_release,
+};
+
+static int __init abdac_probe(struct platform_device *pdev)
+{
+	struct at32_dac *dac;
+	struct resource *regs;
+	struct clk *mck;
+	struct clk *sample_clk;
+	int irq;
+	int ret;
+
+	if (the_dac)
+		return -EBUSY;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs)
+		return -ENXIO;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	mck = clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(mck))
+		return PTR_ERR(mck);
+	sample_clk = clk_get(&pdev->dev, "sample_clk");
+	if (IS_ERR(sample_clk)) {
+		ret = PTR_ERR(sample_clk);
+		goto out_put_mck;
+	}
+	clk_enable(mck);
+
+	ret = -ENOMEM;
+	dac = kzalloc(sizeof(struct at32_dac), GFP_KERNEL);
+	if (!dac)
+		goto out_disable_clk;
+
+	spin_lock_init(&dac->lock);
+	init_MUTEX(&dac->sem);
+	init_waitqueue_head(&dac->write_wait);
+	dac->pdev = pdev;
+	dac->mck = mck;
+	dac->sample_clk = sample_clk;
+
+	dac->regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!dac->regs)
+		goto out_free_dac;
+
+	ret = request_irq(irq, abdac_interrupt, 0, "dac", dac);
+	if (ret)
+		goto out_unmap_regs;
+
+	/* FIXME */
+	dac->req.req.dmac = find_dma_controller(0);
+	if (!dac->req.req.dmac)
+		goto out_free_irq;
+
+	ret = dma_alloc_channel(dac->req.req.dmac);
+	if (ret < 0)
+		goto out_free_irq;
+
+	dac->req.req.channel = ret;
+	dac->req.req.block_complete = abdac_dma_block_complete;
+	dac->req.req.error = abdac_dma_error;
+	dac->req.data_reg = regs->start + DAC_DATA;
+	dac->req.periph_id = 2; /* FIXME */
+	dac->req.direction = DMA_DIR_MEM_TO_PERIPH;
+	dac->req.width = DMA_WIDTH_32BIT;
+
+	/* Make sure the DAC is silent and disabled */
+	dac_writel(dac, DATA, 0);
+	dac_writel(dac, CTRL, 0);
+
+	ret = register_sound_dsp(&abdac_dsp_fops, -1);
+	if (ret < 0)
+		goto out_free_dma;
+	dac->dev_dsp = ret;
+
+	/* TODO: Register mixer */
+
+	the_dac = dac;
+	platform_set_drvdata(pdev, dac);
+
+	return 0;
+
+out_free_dma:
+	dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
+out_free_irq:
+	free_irq(irq, dac);
+out_unmap_regs:
+	iounmap(dac->regs);
+out_free_dac:
+	kfree(dac);
+out_disable_clk:
+	clk_disable(mck);
+	clk_put(sample_clk);
+out_put_mck:
+	clk_put(mck);
+	return ret;
+}
+
+static int __exit abdac_remove(struct platform_device *pdev)
+{
+	struct at32_dac *dac;
+
+	dac = platform_get_drvdata(pdev);
+	if (dac) {
+		unregister_sound_dsp(dac->dev_dsp);
+		dma_release_channel(dac->req.req.dmac, dac->req.req.channel);
+		free_irq(platform_get_irq(pdev, 0), dac);
+		iounmap(dac->regs);
+		clk_disable(dac->mck);
+		clk_put(dac->sample_clk);
+		clk_put(dac->mck);
+		kfree(dac);
+		platform_set_drvdata(pdev, NULL);
+		the_dac = NULL;
+	}
+
+	return 0;
+}
+
+static struct platform_driver abdac_driver = {
+	.remove		= __exit_p(abdac_remove),
+	.driver		= {
+		.name	= "abdac",
+	},
+};
+
+static int __init abdac_init(void)
+{
+	return platform_driver_probe(&abdac_driver, abdac_probe);
+}
+module_init(abdac_init);
+
+static void __exit abdac_exit(void)
+{
+	platform_driver_unregister(&abdac_driver);
+}
+module_exit(abdac_exit);
+
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_DESCRIPTION("Sound Driver for the Atmel AT32 ABDAC");
+MODULE_LICENSE("GPL");
diff -urN linux-2.6.24.3/sound/oss/at32_abdac.h avr32-2.6/sound/oss/at32_abdac.h
--- linux-2.6.24.3/sound/oss/at32_abdac.h	1970-01-01 01:00:00.000000000 +0100
+++ avr32-2.6/sound/oss/at32_abdac.h	2008-04-23 19:33:54.000000000 +0200
@@ -0,0 +1,59 @@
+/*
+ * Register definitions for the Atmel AT32 on-chip DAC.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SOUND_OSS_AT32_ABDAC_H__
+#define __SOUND_OSS_AT32_ABDAC_H__
+
+/* DAC register offsets */
+#define DAC_DATA                                0x0000
+#define DAC_CTRL                                0x0008
+#define DAC_INT_MASK                            0x000c
+#define DAC_INT_EN                              0x0010
+#define DAC_INT_DIS                             0x0014
+#define DAC_INT_CLR                             0x0018
+#define DAC_INT_STATUS                          0x001c
+#define DAC_PDC_DATA                            0x0020
+
+/* Bitfields in CTRL */
+#define DAC_SWAP_OFFSET                         30
+#define DAC_SWAP_SIZE                           1
+#define DAC_EN_OFFSET                           31
+#define DAC_EN_SIZE                             1
+
+/* Bitfields in INT_MASK/INT_EN/INT_DIS/INT_STATUS/INT_CLR */
+#define DAC_UNDERRUN_OFFSET                     28
+#define DAC_UNDERRUN_SIZE                       1
+#define DAC_TX_READY_OFFSET                     29
+#define DAC_TX_READY_SIZE                       1
+#define DAC_TX_BUFFER_EMPTY_OFFSET              30
+#define DAC_TX_BUFFER_EMPTY_SIZE                1
+#define DAC_CHANNEL_TX_END_OFFSET               31
+#define DAC_CHANNEL_TX_END_SIZE                 1
+
+/* Bit manipulation macros */
+#define DAC_BIT(name)					\
+	(1 << DAC_##name##_OFFSET)
+#define DAC_BF(name, value)				\
+	(((value) & ((1 << DAC_##name##_SIZE) - 1))	\
+	 << DAC_##name##_OFFSET)
+#define DAC_BFEXT(name, value)				\
+	(((value) >> DAC_##name##_OFFSET)		\
+	 & ((1 << DAC_##name##_SIZE) - 1))
+#define DAC_BFINS(name, value, old)			\
+	(((old) & ~(((1 << DAC_##name##_SIZE) - 1)	\
+		    << DAC_##name##_OFFSET))		\
+	 | DAC_BF(name,value))
+
+/* Register access macros */
+#define dac_readl(port, reg)				\
+	__raw_readl((port)->regs + DAC_##reg)
+#define dac_writel(port, reg, value)			\
+	__raw_writel((value), (port)->regs + DAC_##reg)
+
+#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
diff -urN linux-2.6.24.3/sound/oss/Kconfig avr32-2.6/sound/oss/Kconfig
--- linux-2.6.24.3/sound/oss/Kconfig	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/sound/oss/Kconfig	2008-04-23 19:33:54.000000000 +0200
@@ -654,3 +654,7 @@
 	int "DAC channel"
 	default "1"
 	depends on SOUND_SH_DAC_AUDIO
+
+config SOUND_AT32_ABDAC
+	tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
+	depends on SOUND_PRIME && AVR32
diff -urN linux-2.6.24.3/sound/oss/Makefile avr32-2.6/sound/oss/Makefile
--- linux-2.6.24.3/sound/oss/Makefile	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/sound/oss/Makefile	2008-04-23 20:12:49.000000000 +0200
@@ -10,6 +10,7 @@
 
 # Please leave it as is, cause the link order is significant !
 
+obj-$(CONFIG_SOUND_AT32_ABDAC)	+= at32_abdac.o
 obj-$(CONFIG_SOUND_SH_DAC_AUDIO)	+= sh_dac_audio.o
 obj-$(CONFIG_SOUND_HAL2)	+= hal2.o
 obj-$(CONFIG_SOUND_AEDSP16)	+= aedsp16.o
diff -urN linux-2.6.24.3/sound/spi/at73c213.c avr32-2.6/sound/spi/at73c213.c
--- linux-2.6.24.3/sound/spi/at73c213.c	2008-02-26 01:20:20.000000000 +0100
+++ avr32-2.6/sound/spi/at73c213.c	2008-04-23 20:12:51.000000000 +0200
@@ -744,7 +744,7 @@
 /*
  * Device functions
  */
-static int snd_at73c213_ssc_init(struct snd_at73c213 *chip)
+static int __devinit snd_at73c213_ssc_init(struct snd_at73c213 *chip)
 {
 	/*
 	 * Continuous clock output.
@@ -774,7 +774,7 @@
 	return 0;
 }
 
-static int snd_at73c213_chip_init(struct snd_at73c213 *chip)
+static int __devinit snd_at73c213_chip_init(struct snd_at73c213 *chip)
 {
 	int retval;
 	unsigned char dac_ctrl = 0;
@@ -939,7 +939,7 @@
 	return retval;
 }
 
-static int snd_at73c213_probe(struct spi_device *spi)
+static int __devinit snd_at73c213_probe(struct spi_device *spi)
 {
 	struct snd_card			*card;
 	struct snd_at73c213		*chip;