aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx/patches-5.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch
blob: 220e5da73b116376bc70912052c87b3c73730ff3 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
Subject: [PATCH v2 1/5] usb: xhci: add firmware loader for uPD720201 and uPD720202 w/o ROM
Date: Fri, 21 Jun 2019 14:29:09 +0530
Message-Id: <20190621085913.8722-2-vkoul@kernel.org>
From: Christian Lamparter <chunkeey@googlemail.com>

This patch adds a firmware loader for the uPD720201K8-711-BAC-A
and uPD720202K8-711-BAA-A variant. Both of these chips are listed
in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
devices which need the firmware loader on page 2 in order to
work as they "do not support the External ROM".

The "Firmware Download Sequence" is describe in chapter
"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.

The firmware "K2013080.mem" is available from a USB3.0 Host to
PCIe Adapter (PP2U-E card) "Firmware download" archive. An
alternative version can be sourced from Netgear's WNDR4700 GPL
archives.

The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
(2012-06-15) state that the firmware is for the following devices:
 - uPD720201 ES 2.0 sample whose revision ID is 2.
 - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
 - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.

Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[vkoul: fixed comments:
	used macros for timeout count and delay
	removed renesas_fw_alive_check
	cleaned renesas_fw_callback
	removed recurion for renesas_fw_download
	added MODULE_FIRMWARE]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/usb/host/xhci-pci.c | 458 ++++++++++++++++++++++++++++++++++++
 1 file changed, 458 insertions(+)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -12,6 +12,8 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/acpi.h>
+#include <linux/firmware.h>
+#include <linux/unaligned/access_ok.h>
 
 #include "xhci.h"
 #include "xhci-trace.h"
@@ -65,6 +67,44 @@
 #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI			0x2142
 #define PCI_DEVICE_ID_ASMEDIA_3242_XHCI			0x3242
 
+#define RENESAS_FW_VERSION				0x6C
+#define RENESAS_ROM_CONFIG				0xF0
+#define RENESAS_FW_STATUS				0xF4
+#define RENESAS_FW_STATUS_MSB				0xF5
+#define RENESAS_ROM_STATUS				0xF6
+#define RENESAS_ROM_STATUS_MSB				0xF7
+#define RENESAS_DATA0					0xF8
+#define RENESAS_DATA1					0xFC
+
+#define RENESAS_FW_VERSION_FIELD			GENMASK(23, 7)
+#define RENESAS_FW_VERSION_OFFSET			8
+
+#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE		BIT(0)
+#define RENESAS_FW_STATUS_LOCK				BIT(1)
+#define RENESAS_FW_STATUS_RESULT			GENMASK(6, 4)
+  #define RENESAS_FW_STATUS_INVALID			0
+  #define RENESAS_FW_STATUS_SUCCESS			BIT(4)
+  #define RENESAS_FW_STATUS_ERROR			BIT(5)
+#define RENESAS_FW_STATUS_SET_DATA0			BIT(8)
+#define RENESAS_FW_STATUS_SET_DATA1			BIT(9)
+
+#define RENESAS_ROM_STATUS_ACCESS			BIT(0)
+#define RENESAS_ROM_STATUS_ERASE			BIT(1)
+#define RENESAS_ROM_STATUS_RELOAD			BIT(2)
+#define RENESAS_ROM_STATUS_RESULT			GENMASK(6, 4)
+  #define RENESAS_ROM_STATUS_INVALID			0
+  #define RENESAS_ROM_STATUS_SUCCESS			BIT(4)
+  #define RENESAS_ROM_STATUS_ERROR			BIT(5)
+#define RENESAS_ROM_STATUS_SET_DATA0			BIT(8)
+#define RENESAS_ROM_STATUS_SET_DATA1			BIT(9)
+#define RENESAS_ROM_STATUS_ROM_EXISTS			BIT(15)
+
+#define RENESAS_ROM_ERASE_MAGIC				0x5A65726F
+#define RENESAS_ROM_WRITE_MAGIC				0x53524F4D
+
+#define RENESAS_RETRY	1000
+#define RENESAS_DELAY	10
+
 static const char hcd_name[] = "xhci_hcd";
 
 static struct hc_driver __read_mostly xhci_pci_hc_driver;
@@ -311,6 +351,873 @@ static void xhci_pme_acpi_rtd3_enable(st
 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
 #endif /* CONFIG_ACPI */
 
+static const struct renesas_fw_entry {
+	const char *firmware_name;
+	u16 device;
+	u8 revision;
+	u16 expected_version;
+} renesas_fw_table[] = {
+	/*
+	 * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
+	 * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
+	 * need the software loader.
+	 *
+	 * PP2U/ReleaseNote_USB3-201-202-FW.txt:
+	 *
+	 * Note: This firmware is for the following devices.
+	 *  - uPD720201 ES 2.0 sample whose revision ID is 2.
+	 *  - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
+	 *  - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
+	 *
+	 *  Entry expected_version should be kept in increasing order for a
+	 *  chip, so that driver will pick first version and if that fails
+	 *  then next one will be picked
+	 */
+	{ "K2013080.mem", 0x0014, 0x02, 0x2013 },
+	{ "K2013080.mem", 0x0014, 0x03, 0x2013 },
+	{ "K2026090.mem", 0x0014, 0x03, 0x2026 },
+	{ "K2013080.mem", 0x0015, 0x02, 0x2013 },
+	{ "K2026090.mem", 0x0015, 0x02, 0x2026 },
+};
+
+MODULE_FIRMWARE("K2013080.mem");
+MODULE_FIRMWARE("K2026090.mem");
+
+static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
+{
+	const struct renesas_fw_entry *entry;
+	size_t i;
+
+	/* This loader will only work with a RENESAS device. */
+	if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
+		return NULL;
+
+	for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
+		entry = &renesas_fw_table[i];
+		if (entry->device == dev->device &&
+		    entry->revision == dev->revision)
+			return entry;
+	}
+
+	return NULL;
+}
+
+static const struct
+renesas_fw_entry *renesas_get_next_entry(struct pci_dev *dev,
+					 const struct renesas_fw_entry *entry)
+{
+	const struct renesas_fw_entry *next_entry;
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
+		next_entry = &renesas_fw_table[i];
+		if (next_entry->device == dev->device &&
+		    next_entry->revision == dev->revision &&
+		    next_entry->expected_version > entry->expected_version)
+			return next_entry;
+	}
+
+	return NULL;
+}
+
+static int renesas_fw_download_image(struct pci_dev *dev,
+				     const u32 *fw,
+				     size_t step)
+{
+	size_t i;
+	int err;
+	u8 fw_status;
+	bool data0_or_data1;
+
+	/*
+	 * The hardware does alternate between two 32-bit pages.
+	 * (This is because each row of the firmware is 8 bytes).
+	 *
+	 * for even steps we use DATA0, for odd steps DATA1.
+	 */
+	data0_or_data1 = (step & 1) == 1;
+
+	/* step+1. Read "Set DATAX" and confirm it is cleared. */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(dev, RENESAS_FW_STATUS_MSB,
+					   &fw_status);
+		if (err)
+			return pcibios_err_to_errno(err);
+		if (!(fw_status & BIT(data0_or_data1)))
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY)
+		return -ETIMEDOUT;
+
+	/*
+	 * step+2. Write FW data to "DATAX".
+	 * "LSB is left" => force little endian
+	 */
+	err = pci_write_config_dword(dev, data0_or_data1 ?
+				     RENESAS_DATA1 : RENESAS_DATA0,
+				     (__force u32)cpu_to_le32(fw[step]));
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	udelay(100);
+
+	/* step+3. Set "Set DATAX". */
+	err = pci_write_config_byte(dev, RENESAS_FW_STATUS_MSB,
+				    BIT(data0_or_data1));
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	return 0;
+}
+
+static int renesas_fw_verify(struct pci_dev *dev,
+			     const void *fw_data,
+			     size_t length)
+{
+	const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
+	u16 fw_version_pointer;
+	u16 fw_version;
+
+	if (!entry)
+		return -EINVAL;
+
+	/*
+	 * The Firmware's Data Format is describe in
+	 * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
+	 */
+
+	/* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
+	if (length % 8 != 0)
+		dev_warn(&dev->dev, "firmware size is not a multiple of 8.");
+
+	/*
+	 * The bootrom chips of the big brother have sizes up to 64k, let's
+	 * assume that's the biggest the firmware can get.
+	 */
+	if (length < 0x1000 || length >= 0x10000) {
+		dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
+			length);
+		return -EINVAL;
+	}
+
+	/* The First 2 bytes are fixed value (55aa). "LSB on Left" */
+	if (get_unaligned_le16(fw_data) != 0x55aa) {
+		dev_err(&dev->dev, "no valid firmware header found.");
+		return -EINVAL;
+	}
+
+	/* verify the firmware version position and print it. */
+	fw_version_pointer = get_unaligned_le16(fw_data + 4);
+	if (fw_version_pointer + 2 >= length) {
+		dev_err(&dev->dev,
+			"firmware version pointer is outside of the firmware image.");
+		return -EINVAL;
+	}
+
+	fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
+	dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
+
+	if (fw_version != entry->expected_version) {
+		dev_err(&dev->dev,
+			"firmware version mismatch, expected version: %02x.",
+			entry->expected_version);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int renesas_check_rom_state(struct pci_dev *pdev)
+{
+	const struct renesas_fw_entry *entry;
+	u16 rom_state;
+	u32 version;
+	bool valid_version = false;
+	int err, i;
+
+	/* check FW version */
+	err = pci_read_config_dword(pdev, RENESAS_FW_VERSION, &version);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	version &= RENESAS_FW_VERSION_FIELD;
+	version = version >> RENESAS_FW_VERSION_OFFSET;
+	dev_dbg(&pdev->dev, "Found FW version loaded is %x\n", version);
+
+	/* treat version in renesas_fw_table as correct ones */
+	for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
+		entry = &renesas_fw_table[i];
+		if (version == entry->expected_version) {
+			dev_dbg(&pdev->dev, "Detected valid ROM version..\n");
+			valid_version = true;
+		}
+	}
+
+	/*
+	 * Test if ROM is present and loaded, if so we can skip everything
+	 */
+	err = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_state);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	if (rom_state & BIT(15)) {
+		/* ROM exists */
+		dev_dbg(&pdev->dev, "ROM exists\n");
+
+		/* Check the "Result Code" Bits (6:4) and act accordingly */
+		switch (rom_state & RENESAS_ROM_STATUS_RESULT) {
+		case RENESAS_ROM_STATUS_SUCCESS:
+			dev_dbg(&pdev->dev, "Success ROM load...");
+			/* we have valid version and status so success */
+			if (valid_version)
+				return 0;
+			break;
+
+		case RENESAS_ROM_STATUS_INVALID: /* No result yet */
+			dev_dbg(&pdev->dev, "No result as it is ROM...");
+			/* we have valid version and status so success */
+			if (valid_version)
+				return 0;
+			break;
+
+		case RENESAS_ROM_STATUS_ERROR: /* Error State */
+		default: /* All other states are marked as "Reserved states" */
+			dev_err(&pdev->dev, "Invalid ROM..");
+			break;
+		}
+	}
+
+	return -EIO;
+}
+
+static int renesas_fw_check_running(struct pci_dev *pdev)
+{
+	int err;
+	u8 fw_state;
+
+	/* Check if device has ROM and loaded, if so skip everything */
+	err = renesas_check_rom_state(pdev);
+	if (!err)
+		return err;
+
+	/*
+	 * Test if the device is actually needing the firmware. As most
+	 * BIOSes will initialize the device for us. If the device is
+	 * initialized.
+	 */
+	err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	/*
+	 * Check if "FW Download Lock" is locked. If it is and the FW is
+	 * ready we can simply continue. If the FW is not ready, we have
+	 * to give up.
+	 */
+	if (fw_state & RENESAS_FW_STATUS_LOCK) {
+		dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
+
+		if (fw_state & RENESAS_FW_STATUS_SUCCESS)
+			return 0;
+
+		dev_err(&pdev->dev,
+			"FW Download Lock is set and FW is not ready. Giving Up.");
+		return -EIO;
+	}
+
+	/*
+	 * Check if "FW Download Enable" is set. If someone (us?) tampered
+	 * with it and it can't be resetted, we have to give up too... and
+	 * ask for a forgiveness and a reboot.
+	 */
+	if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) {
+		dev_err(&pdev->dev,
+			"FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
+		return -EIO;
+	}
+
+	/* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
+	switch (fw_state & RENESAS_FW_STATUS_RESULT) {
+	case 0: /* No result yet */
+		dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
+
+		/* tell the caller, that this device needs the firmware. */
+		return 1;
+
+	case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */
+		dev_dbg(&pdev->dev, "FW is ready.");
+		return 0;
+
+	case RENESAS_FW_STATUS_ERROR: /* Error State */
+		dev_err(&pdev->dev,
+			"hardware is in an error state. Giving up (poweroff/reboot needed).");
+		return -ENODEV;
+
+	default: /* All other states are marked as "Reserved states" */
+		dev_err(&pdev->dev,
+			"hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).",
+			(fw_state & RENESAS_FW_STATUS_RESULT) >> 4);
+		return -EINVAL;
+	}
+}
+
+static int renesas_fw_download(struct pci_dev *pdev,
+			       const struct firmware *fw)
+{
+	const u32 *fw_data = (const u32 *)fw->data;
+	size_t i;
+	int err;
+	u8 fw_status;
+
+	/*
+	 * For more information and the big picture: please look at the
+	 * "Firmware Download Sequence" in "7.1 FW Download Interface"
+	 * of R19UH0078EJ0500 Rev.5.00 page 131
+	 */
+
+	/*
+	 * 0. Set "FW Download Enable" bit in the
+	 * "FW Download Control & Status Register" at 0xF4
+	 */
+	err = pci_write_config_byte(pdev, RENESAS_FW_STATUS,
+				    RENESAS_FW_STATUS_DOWNLOAD_ENABLE);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	/* 1 - 10 follow one step after the other. */
+	for (i = 0; i < fw->size / 4; i++) {
+		err = renesas_fw_download_image(pdev, fw_data, i);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Firmware Download Step %zd failed at position %zd bytes with (%d).",
+				i, i * 4, err);
+			return err;
+		}
+	}
+
+	/*
+	 * This sequence continues until the last data is written to
+	 * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
+	 * is cleared by the hardware beforehand.
+	 */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB,
+					   &fw_status);
+		if (err)
+			return pcibios_err_to_errno(err);
+		if (!(fw_status & (BIT(0) | BIT(1))))
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY)
+		dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
+
+	/*
+	 * 11. After finishing writing the last data of FW, the
+	 * System Software must clear "FW Download Enable"
+	 */
+	err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	/* 12. Read "Result Code" and confirm it is good. */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status);
+		if (err)
+			return pcibios_err_to_errno(err);
+		if (fw_status & RENESAS_FW_STATUS_SUCCESS)
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY) {
+		/* Timed out / Error - let's see if we can fix this */
+		err = renesas_fw_check_running(pdev);
+		switch (err) {
+		case 0: /*
+			 * we shouldn't end up here.
+			 * maybe it took a little bit longer.
+			 * But all should be well?
+			 */
+			break;
+
+		case 1: /* (No result yet! */
+			return -ETIMEDOUT;
+
+		default:
+			return err;
+		}
+	}
+	/*
+	 * Optional last step: Engage Firmware Lock
+	 *
+	 * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
+	 * if (err)
+	 *	return pcibios_err_to_errno(err);
+	 */
+
+	return 0;
+}
+
+struct renesas_fw_ctx {
+	struct pci_dev *pdev;
+	const struct pci_device_id *id;
+	bool resume;
+	const struct renesas_fw_entry *entry;
+};
+
+static int xhci_pci_probe(struct pci_dev *pdev,
+			  const struct pci_device_id *id);
+
+static bool renesas_check_rom(struct pci_dev *pdev)
+{
+	u16 rom_status;
+	int retval;
+
+	/* 1. Check if external ROM exists */
+	retval = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_status);
+	if (retval)
+		return false;
+
+	rom_status &= RENESAS_ROM_STATUS_ROM_EXISTS;
+	if (rom_status) {
+		dev_dbg(&pdev->dev, "External ROM exists\n");
+		return true; /* External ROM exists */
+	}
+
+	return false;
+}
+
+static void renesas_rom_erase(struct pci_dev *pdev)
+{
+	int retval, i;
+	u8 status;
+
+	dev_dbg(&pdev->dev, "Performing ROM Erase...\n");
+	retval = pci_write_config_dword(pdev, RENESAS_DATA0,
+					RENESAS_ROM_ERASE_MAGIC);
+	if (retval) {
+		dev_err(&pdev->dev, "ROM erase, magic word write failed: %d\n",
+			pcibios_err_to_errno(retval));
+		return;
+	}
+
+	retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
+	if (retval) {
+		dev_err(&pdev->dev, "ROM status read failed: %d\n",
+			pcibios_err_to_errno(retval));
+		return;
+	}
+	status |= RENESAS_ROM_STATUS_ERASE;
+	retval = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, status);
+	if (retval) {
+		dev_err(&pdev->dev, "ROM erase set word write failed\n");
+		return;
+	}
+
+	/* sleep a bit while ROM is erased */
+	msleep(20);
+
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS,
+					      &status);
+		status &= RENESAS_ROM_STATUS_ERASE;
+		if (!status)
+			break;
+
+		mdelay(RENESAS_DELAY);
+	}
+
+	if (i == RENESAS_RETRY)
+		dev_dbg(&pdev->dev, "Chip erase timedout: %x\n", status);
+
+	dev_dbg(&pdev->dev, "ROM Erase... Done success\n");
+}
+
+static bool renesas_download_rom(struct pci_dev *pdev,
+				 const u32 *fw, size_t step)
+{
+	bool data0_or_data1;
+	u8 fw_status;
+	size_t i;
+	int err;
+
+	/*
+	 * The hardware does alternate between two 32-bit pages.
+	 * (This is because each row of the firmware is 8 bytes).
+	 *
+	 * for even steps we use DATA0, for odd steps DATA1.
+	 */
+	data0_or_data1 = (step & 1) == 1;
+
+	/* Read "Set DATAX" and confirm it is cleared. */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
+					   &fw_status);
+		if (err) {
+			dev_err(&pdev->dev, "Read ROM Status failed: %d\n",
+				pcibios_err_to_errno(err));
+			return false;
+		}
+		if (!(fw_status & BIT(data0_or_data1)))
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY) {
+		dev_err(&pdev->dev, "Timeout for Set DATAX step: %zd\n", step);
+		return false;
+	}
+
+	/*
+	 * Write FW data to "DATAX".
+	 * "LSB is left" => force little endian
+	 */
+	err = pci_write_config_dword(pdev, data0_or_data1 ?
+				     RENESAS_DATA1 : RENESAS_DATA0,
+				     (__force u32)cpu_to_le32(fw[step]));
+	if (err) {
+		dev_err(&pdev->dev, "Write to DATAX failed: %d\n",
+			pcibios_err_to_errno(err));
+		return false;
+	}
+
+	udelay(100);
+
+	/* Set "Set DATAX". */
+	err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
+				    BIT(data0_or_data1));
+	if (err) {
+		dev_err(&pdev->dev, "Write config for DATAX failed: %d\n",
+			pcibios_err_to_errno(err));
+		return false;
+	}
+
+	return true;
+}
+
+static bool renesas_setup_rom(struct pci_dev *pdev, const struct firmware *fw)
+{
+	const u32 *fw_data = (const u32 *)fw->data;
+	int err, i;
+	u8 status;
+
+	/* 2. Write magic word to Data0 */
+	err = pci_write_config_dword(pdev, RENESAS_DATA0,
+				     RENESAS_ROM_WRITE_MAGIC);
+	if (err)
+		return false;
+
+	/* 3. Set External ROM access */
+	err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
+				    RENESAS_ROM_STATUS_ACCESS);
+	if (err)
+		goto remove_bypass;
+
+	/* 4. Check the result */
+	err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
+	if (err)
+		goto remove_bypass;
+	status &= GENMASK(6, 4);
+	if (status) {
+		dev_err(&pdev->dev,
+			"setting external rom failed: %x\n", status);
+		goto remove_bypass;
+	}
+
+	/* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */
+	for (i = 0; i < fw->size / 4; i++) {
+		err = renesas_download_rom(pdev, fw_data, i);
+		if (!err) {
+			dev_err(&pdev->dev,
+				"ROM Download Step %d failed at position %d bytes\n",
+				 i, i * 4);
+			goto remove_bypass;
+		}
+	}
+
+	/*
+	 * wait till DATA0/1 is cleared
+	 */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
+					   &status);
+		if (err)
+			goto remove_bypass;
+		if (!(status & (BIT(0) | BIT(1))))
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY) {
+		dev_err(&pdev->dev, "Final Firmware ROM Download step timed out\n");
+		goto remove_bypass;
+	}
+
+	/* 17. Remove bypass */
+	err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
+	if (err)
+		return false;
+
+	udelay(10);
+
+	/* 18. check result */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
+		if (err) {
+			dev_err(&pdev->dev, "Read ROM status failed:%d\n",
+				pcibios_err_to_errno(err));
+			return false;
+		}
+		status &= RENESAS_ROM_STATUS_RESULT;
+		if (status ==  RENESAS_ROM_STATUS_SUCCESS) {
+			dev_dbg(&pdev->dev, "Download ROM success\n");
+			break;
+		}
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY) { /* Timed out */
+		dev_err(&pdev->dev,
+			"Download to external ROM TO: %x\n", status);
+		return false;
+	}
+
+	dev_dbg(&pdev->dev, "Download to external ROM scuceeded\n");
+
+	/* Last step set Reload */
+	err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
+				    RENESAS_ROM_STATUS_RELOAD);
+	if (err) {
+		dev_err(&pdev->dev, "Set ROM execute failed: %d\n",
+			pcibios_err_to_errno(err));
+		return false;
+	}
+
+	/*
+	 * wait till Reload is cleared
+	 */
+	for (i = 0; i < RENESAS_RETRY; i++) {
+		err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
+		if (err)
+			return false;
+		if (!(status & RENESAS_ROM_STATUS_RELOAD))
+			break;
+
+		udelay(RENESAS_DELAY);
+	}
+	if (i == RENESAS_RETRY) {
+		dev_err(&pdev->dev, "ROM Exec timed out: %x\n", status);
+		return false;
+	}
+
+	return true;
+
+remove_bypass:
+	pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
+	return false;
+}
+
+static void renesas_fw_callback(const struct firmware *fw,
+				void *context)
+{
+	struct renesas_fw_ctx *ctx = context;
+	struct pci_dev *pdev = ctx->pdev;
+	struct device *parent = pdev->dev.parent;
+	const struct renesas_fw_entry *next_entry;
+	bool rom;
+	int err;
+
+	if (!fw) {
+		dev_err(&pdev->dev, "firmware failed to load\n");
+		/*
+		 * we didn't find firmware, check if we have another
+		 * entry for this device
+		 */
+		next_entry = renesas_get_next_entry(ctx->pdev, ctx->entry);
+		if (next_entry) {
+			ctx->entry = next_entry;
+			dev_dbg(&pdev->dev, "Found next entry, requesting: %s\n",
+				next_entry->firmware_name);
+			request_firmware_nowait(THIS_MODULE, 1,
+						next_entry->firmware_name,
+						&pdev->dev, GFP_KERNEL,
+						ctx, renesas_fw_callback);
+			return;
+		} else {
+			goto cleanup;
+		}
+	}
+
+	err = renesas_fw_verify(pdev, fw->data, fw->size);
+	if (err)
+		goto cleanup;
+
+	/* Check if the device has external ROM */
+	rom = renesas_check_rom(pdev);
+	if (rom) {
+		/* perfrom chip erase first */
+		renesas_rom_erase(pdev);
+
+		/* lets try loading fw on ROM first */
+		rom = renesas_setup_rom(pdev, fw);
+		if (!rom) {
+			dev_err(&pdev->dev,
+				"ROM load failed, falling back on FW load\n");
+		} else {
+			dev_dbg(&pdev->dev, "ROM load done..\n");
+
+			release_firmware(fw);
+			goto do_probe;
+		}
+	}
+
+	err = renesas_fw_download(pdev, fw);
+	release_firmware(fw);
+	if (err) {
+		dev_err(&pdev->dev, "firmware failed to download (%d).", err);
+		goto cleanup;
+	}
+
+do_probe:
+	if (ctx->resume)
+		return;
+
+	err = xhci_pci_probe(pdev, ctx->id);
+	if (!err) {
+		/* everything worked */
+		devm_kfree(&pdev->dev, ctx);
+		return;
+	}
+
+cleanup:
+	/* in case of an error - fall through */
+	dev_info(&pdev->dev, "Unloading driver");
+
+	if (parent)
+		device_lock(parent);
+
+	device_release_driver(&pdev->dev);
+
+	if (parent)
+		device_unlock(parent);
+
+	pci_dev_put(pdev);
+}
+
+static int renesas_fw_alive_check(struct pci_dev *pdev)
+{
+	const struct renesas_fw_entry *entry;
+
+	/* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
+	entry = renesas_needs_fw_dl(pdev);
+	if (!entry)
+		return 0;
+
+	return renesas_fw_check_running(pdev);
+}
+
+static int renesas_fw_download_to_hw(struct pci_dev *pdev,
+				     const struct pci_device_id *id,
+				     bool do_resume)
+{
+	const struct renesas_fw_entry *entry;
+	struct renesas_fw_ctx *ctx;
+	int err;
+
+	/* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
+	entry = renesas_needs_fw_dl(pdev);
+	if (!entry)
+		return 0;
+
+	err = renesas_fw_check_running(pdev);
+	/* Continue ahead, if the firmware is already running. */
+	if (err == 0)
+		return 0;
+
+	if (err != 1)
+		return err;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	ctx->pdev = pdev;
+	ctx->resume = do_resume;
+	ctx->id = id;
+	ctx->entry = entry;
+
+	pci_dev_get(pdev);
+	err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
+				      &pdev->dev, GFP_KERNEL,
+				      ctx, renesas_fw_callback);
+	if (err) {
+		pci_dev_put(pdev);
+		return err;
+	}
+
+	/*
+	 * The renesas_fw_callback() callback will continue the probe
+	 * process, once it aquires the firmware.
+	 */
+	return 1;
+}
+
+static int renesas_check_if_fw_dl_is_needed(struct pci_dev *pdev)
+{
+	int err;
+	u8 fw_state;
+
+	/*
+	 * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
+	 * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
+	 * need a firmware in order to work.
+	 *
+	 *  - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
+	 *  - uPD720201 ES 2.0 sample whose revision ID is 2.
+	 *  - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
+	 */
+	if (!((pdev->vendor == PCI_VENDOR_ID_RENESAS) &&
+	    ((pdev->device == 0x0015 && pdev->revision == 0x02) ||
+	    (pdev->device == 0x0014 &&
+	    (pdev->revision == 0x02 || pdev->revision == 0x03)))))
+		return 0;
+
+	/* Check if device has ROM and loaded, if so skip everything */
+	err = renesas_check_rom_state(pdev);
+	if (!err)
+		return err;
+
+	/*
+	 * Test if the firmware was uploaded and is running.
+	 * As most BIOSes will initialize the device for us.
+	 */
+	err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
+	if (err)
+		return pcibios_err_to_errno(err);
+
+	/* Check the "Result Code" Bits (6:4) and act accordingly */
+	switch (fw_state & RENESAS_FW_STATUS_RESULT) {
+	case 0: /* No result yet */
+		dev_err(&pdev->dev, "FW is not ready/loaded yet.");
+		return -ENODEV;
+
+	case RENESAS_FW_STATUS_SUCCESS:
+		dev_dbg(&pdev->dev, "FW is ready.");
+		return 0;
+
+	case RENESAS_FW_STATUS_ERROR:
+		dev_err(&pdev->dev, "HW is in an error state.");
+		return -ENODEV;
+
+	default: /* All other states are marked as "Reserved states" */
+		dev_err(&pdev->dev, "HW is in an invalid state (%x).",
+			(fw_state & 0x70) >> 4);
+		return -EINVAL;
+	}
+}
+
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
@@ -352,6 +1259,27 @@ static int xhci_pci_probe(struct pci_dev
 	struct hc_driver *driver;
 	struct usb_hcd *hcd;
 
+	/*
+	 * Check if this device is a RENESAS uPD720201/2 device.
+	 * Otherwise, we can continue with xhci_pci_probe as usual.
+	 */
+	retval = renesas_fw_download_to_hw(dev, id, false);
+	switch (retval) {
+	case 0:
+		break;
+
+	case 1: /* let it load the firmware and recontinue the probe. */
+		return 0;
+
+	default:
+		return retval;
+	};
+
+	/* Check if this device is a RENESAS uPD720201/2 device. */
+	retval = renesas_check_if_fw_dl_is_needed(dev);
+	if (retval)
+		return retval;
+
 	driver = (struct hc_driver *)id->driver_data;
 
 	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
@@ -413,6 +1341,16 @@ static void xhci_pci_remove(struct pci_d
 {
 	struct xhci_hcd *xhci;
 
+	if (renesas_fw_alive_check(dev)) {
+		/*
+		 * bail out early, if this was a renesas device w/o FW.
+		 * Else we might hit the NMI watchdog in xhci_handsake
+		 * during xhci_reset as part of the driver's unloading.
+		 * which we forced in the renesas_fw_callback().
+		 */
+		return;
+	}
+
 	xhci = hcd_to_xhci(pci_get_drvdata(dev));
 	xhci->xhc_state |= XHCI_STATE_REMOVING;
 
@@ -552,6 +1490,11 @@ static int xhci_pci_resume(struct usb_hc
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
 		usb_enable_intel_xhci_ports(pdev);
 
+	/* Check if this device is a RENESAS uPD720201/2 device. */
+	retval = renesas_check_if_fw_dl_is_needed(pdev);
+	if (retval)
+		return retval;
+
 	if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
 		xhci_ssic_port_unused_quirk(hcd, false);