path: root/package/network/services/hostapd/patches/551-wpa_supplicant-Add-Multi-AP-protocol-support-to-supp.patch

From 5abc7823bd01f69b8afbe1fd19f65fff86137c44 Mon Sep 17 00:00:00 2001
From: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Date: Wed, 5 Dec 2018 11:23:53 +0100
Subject: [PATCH] wpa_supplicant: Add Multi-AP backhaul STA support

Advertise vendor specific Multi-AP IE in (Re)Association Request frames
and process Multi-AP IE from (Re)Association Response frames if the user
enables Multi-AP fuctionality. If the (Re)Association Response frame
does not contain the Multi-AP IE, disassociate.

This adds a new configuration parameter 'multi_ap_backhaul_sta' to
enable/disable Multi-AP functionality.

Enable 4-address mode after association (if the Association Response
frame contains the Multi-AP IE). Also enable the bridge in that case.
This is necessary because wpa_supplicant only enables the bridge in
wpa_drv_if_add(), which only gets called when an interface is added
through the control interface, not when it is configured from the
command line.

Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
 src/drivers/driver.h               |  9 ++++++
 src/drivers/driver_nl80211.c       | 44 ++++++++++++++++++++++++++
 wpa_supplicant/config.c            |  1 +
 wpa_supplicant/config_ssid.h       |  7 +++++
 wpa_supplicant/driver_i.h          |  8 +++++
 wpa_supplicant/events.c            | 50 ++++++++++++++++++++++++++++++
 wpa_supplicant/sme.c               | 16 ++++++++++
 wpa_supplicant/wpa_supplicant.c    | 18 +++++++++++
 wpa_supplicant/wpa_supplicant.conf |  7 +++++
 wpa_supplicant/wpa_supplicant_i.h  |  1 +
 10 files changed, 161 insertions(+)

--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -4100,6 +4100,15 @@ struct wpa_driver_ops {
 	 */
 	int (*send_external_auth_status)(void *priv,
 					 struct external_auth *params);
+
+	/**
+	 * set_4addr_mode - Set 4-address mode
+	 * @priv: Private driver interface data
+	 * @bridge_ifname: Bridge interface name
+	 * @val: 0 - disable 4addr mode, 1 - enable 4addr mode
+	 * Returns: 0 on success, < 0 on failure
+	 */
+	int (*set_4addr_mode)(void *priv, const char *bridge_ifname, int val);
 };
 
 /**
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -10728,6 +10728,49 @@ fail:
 }
 
 
+static int nl80211_set_4addr_mode(void *priv, const char *bridge_ifname,
+				  int val)
+{
+	struct i802_bss *bss = priv;
+	struct wpa_driver_nl80211_data *drv = bss->drv;
+	struct nl_msg *msg;
+	int ret = -ENOBUFS;
+
+	wpa_printf(MSG_DEBUG, "nl80211: %s 4addr mode (bridge_ifname: %s)",
+		   val ? "Enable" : "Disable", bridge_ifname);
+
+	msg = nl80211_cmd_msg(drv->first_bss, 0, NL80211_CMD_SET_INTERFACE);
+	if (!msg || nla_put_u8(msg, NL80211_ATTR_4ADDR, val))
+		goto fail;
+
+	if (bridge_ifname[0] && bss->added_if_into_bridge && !val) {
+		if (linux_br_del_if(drv->global->ioctl_sock,
+				    bridge_ifname, bss->ifname)) {
+			wpa_printf(MSG_ERROR,
+				   "nl80211: Failed to remove interface %s from bridge %s",
+				   bss->ifname, bridge_ifname);
+			return -1;
+		}
+		bss->added_if_into_bridge = 0;
+	}
+
+	ret = send_and_recv_msgs(drv, msg, NULL, NULL);
+	msg = NULL;
+	if (!ret) {
+		if (bridge_ifname[0] && val &&
+		    i802_check_bridge(drv, bss, bridge_ifname, bss->ifname) < 0)
+			return -1;
+		return 0;
+	}
+
+fail:
+	nlmsg_free(msg);
+	wpa_printf(MSG_ERROR, "nl80211: Failed to enable/disable 4addr");
+
+	return ret;
+}
+
+
 const struct wpa_driver_ops wpa_driver_nl80211_ops = {
 	.name = "nl80211",
 	.desc = "Linux nl80211/cfg80211",
@@ -10856,4 +10899,5 @@ const struct wpa_driver_ops wpa_driver_n
 	.get_ext_capab = nl80211_get_ext_capab,
 	.update_connect_params = nl80211_update_connection_params,
 	.send_external_auth_status = nl80211_send_external_auth_status,
+	.set_4addr_mode = nl80211_set_4addr_mode,
 };
--- a/wpa_supplicant/config.c
+++ b/wpa_supplicant/config.c
@@ -2416,6 +2416,7 @@ static const struct parse_data ssid_fiel
 #endif /* CONFIG_DPP */
 	{ INT_RANGE(owe_group, 0, 65535) },
 	{ INT_RANGE(owe_only, 0, 1) },
+	{ INT_RANGE(multi_ap_backhaul_sta, 0, 1) },
 };
 
 #undef OFFSET
--- a/wpa_supplicant/config_ssid.h
+++ b/wpa_supplicant/config_ssid.h
@@ -950,6 +950,13 @@ struct wpa_ssid {
 	 * the selection attempts for OWE BSS exceed the configured threshold.
 	 */
 	int owe_transition_bss_select_count;
+
+	/**
+	 * multi_ap_backhaul_sta - Multi-AP backhaul STA
+	 * 0 = normal (non-Multi-AP) station
+	 * 1 = Multi-AP backhaul station
+	 */
+	int multi_ap_backhaul_sta;
 };
 
 #endif /* CONFIG_SSID_H */
--- a/wpa_supplicant/driver_i.h
+++ b/wpa_supplicant/driver_i.h
@@ -1046,4 +1046,12 @@ wpa_drv_send_external_auth_status(struct
 							params);
 }
 
+static inline int wpa_drv_set_4addr_mode(struct wpa_supplicant *wpa_s, int val)
+{
+	if (!wpa_s->driver->set_4addr_mode)
+		return -1;
+	return wpa_s->driver->set_4addr_mode(wpa_s->drv_priv,
+					     wpa_s->bridge_ifname, val);
+}
+
 #endif /* DRIVER_I_H */
--- a/wpa_supplicant/events.c
+++ b/wpa_supplicant/events.c
@@ -324,6 +324,9 @@ void wpa_supplicant_mark_disassoc(struct
 	os_memset(wpa_s->last_tk, 0, sizeof(wpa_s->last_tk));
 #endif /* CONFIG_TESTING_OPTIONS */
 	wpa_s->ieee80211ac = 0;
+
+	if (wpa_s->enabled_4addr_mode && wpa_drv_set_4addr_mode(wpa_s, 0) == 0)
+		wpa_s->enabled_4addr_mode = 0;
 }
 
 
@@ -2267,6 +2270,50 @@ static void interworking_process_assoc_r
 #endif /* CONFIG_INTERWORKING */
 
 
+static void multi_ap_process_assoc_resp(struct wpa_supplicant *wpa_s,
+					const u8 *ies, size_t ies_len)
+{
+	struct ieee802_11_elems elems;
+	const u8 *map_sub_elem, *pos;
+	size_t len;
+
+	if (!wpa_s->current_ssid ||
+	    !wpa_s->current_ssid->multi_ap_backhaul_sta ||
+	    !ies ||
+	    ieee802_11_parse_elems(ies, ies_len, &elems, 1) == ParseFailed)
+		return;
+
+	if (!elems.multi_ap || elems.multi_ap_len < 7) {
+		wpa_printf(MSG_INFO, "AP doesn't support Multi-AP protocol");
+		goto fail;
+	}
+
+	pos = elems.multi_ap + 4;
+	len = elems.multi_ap_len - 4;
+
+	map_sub_elem = get_ie(pos, len, MULTI_AP_SUB_ELEM_TYPE);
+	if (!map_sub_elem || map_sub_elem[1] < 1) {
+		wpa_printf(MSG_INFO, "invalid Multi-AP sub elem type");
+		goto fail;
+	}
+
+	if (!(map_sub_elem[2] & MULTI_AP_BACKHAUL_BSS)) {
+		wpa_printf(MSG_INFO, "AP doesn't support backhaul BSS");
+		goto fail;
+	}
+
+	if (wpa_drv_set_4addr_mode(wpa_s, 1) < 0) {
+		wpa_printf(MSG_ERROR, "Failed to set 4addr mode");
+		goto fail;
+	}
+	wpa_s->enabled_4addr_mode = 1;
+	return;
+
+fail:
+	wpa_supplicant_deauthenticate(wpa_s, WLAN_REASON_DEAUTH_LEAVING);
+}
+
+
 #ifdef CONFIG_FST
 static int wpas_fst_update_mbie(struct wpa_supplicant *wpa_s,
 				const u8 *ie, size_t ie_len)
@@ -2343,6 +2390,9 @@ static int wpa_supplicant_event_associnf
 		    get_ie(data->assoc_info.resp_ies,
 			   data->assoc_info.resp_ies_len, WLAN_EID_VHT_CAP))
 			wpa_s->ieee80211ac = 1;
+
+		multi_ap_process_assoc_resp(wpa_s, data->assoc_info.resp_ies,
+					    data->assoc_info.resp_ies_len);
 	}
 	if (data->assoc_info.beacon_ies)
 		wpa_hexdump(MSG_DEBUG, "beacon_ies",
--- a/wpa_supplicant/sme.c
+++ b/wpa_supplicant/sme.c
@@ -1552,6 +1552,22 @@ void sme_associate(struct wpa_supplicant
 	}
 #endif /* CONFIG_OWE */
 
+	if (wpa_s->current_ssid && wpa_s->current_ssid->multi_ap_backhaul_sta) {
+		size_t multi_ap_ie_len;
+
+		multi_ap_ie_len = add_multi_ap_ie(
+			wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len,
+			sizeof(wpa_s->sme.assoc_req_ie) -
+			wpa_s->sme.assoc_req_ie_len,
+			MULTI_AP_BACKHAUL_STA);
+		if (multi_ap_ie_len == 0) {
+			wpa_printf(MSG_ERROR,
+				   "Multi-AP: Failed to build Multi-AP IE");
+			return;
+		}
+		wpa_s->sme.assoc_req_ie_len += multi_ap_ie_len;
+	}
+
 	params.bssid = bssid;
 	params.ssid = wpa_s->sme.ssid;
 	params.ssid_len = wpa_s->sme.ssid_len;
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -2893,6 +2893,21 @@ static u8 * wpas_populate_assoc_ies(
 	}
 #endif /* CONFIG_IEEE80211R */
 
+	if (ssid->multi_ap_backhaul_sta) {
+		size_t multi_ap_ie_len;
+
+		multi_ap_ie_len = add_multi_ap_ie(wpa_ie + wpa_ie_len,
+						  max_wpa_ie_len - wpa_ie_len,
+						  MULTI_AP_BACKHAUL_STA);
+		if (multi_ap_ie_len == 0) {
+			wpa_printf(MSG_ERROR,
+				   "Multi-AP: Failed to build Multi-AP IE");
+			os_free(wpa_ie);
+			return NULL;
+		}
+		wpa_ie_len += multi_ap_ie_len;
+	}
+
 	params->wpa_ie = wpa_ie;
 	params->wpa_ie_len = wpa_ie_len;
 	params->auth_alg = algs;
@@ -3377,6 +3392,9 @@ void wpa_supplicant_deauthenticate(struc
 		zero_addr = 1;
 	}
 
+	if (wpa_s->enabled_4addr_mode && wpa_drv_set_4addr_mode(wpa_s, 0) == 0)
+		wpa_s->enabled_4addr_mode = 0;
+
 #ifdef CONFIG_TDLS
 	wpa_tdls_teardown_peers(wpa_s->wpa);
 #endif /* CONFIG_TDLS */
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -1399,6 +1399,13 @@ fast_reauth=1
 #  2: MCS 0-9
 #  3: not supported
 
+# multi_ap_backhaul_sta: Multi-AP backhaul STA functionality
+# 0 = normal STA (default)
+# 1 = backhaul STA
+# A backhaul STA sends the Multi-AP IE, fails to associate if the AP does not
+# support Multi-AP, and sets 4-address mode if it does. Thus, the netdev can be
+# added to a bridge to allow forwarding frames over this backhaul link.
+
 ##### Fast Session Transfer (FST) support #####################################
 #
 # The options in this section are only available when the build configuration
--- a/wpa_supplicant/wpa_supplicant_i.h
+++ b/wpa_supplicant/wpa_supplicant_i.h
@@ -1242,6 +1242,7 @@ struct wpa_supplicant {
 	unsigned int disable_fils:1;
 #endif /* CONFIG_FILS */
 	unsigned int ieee80211ac:1;
+	unsigned int enabled_4addr_mode:1;
 };