# Hey Emacs, this is a -*- makefile -*- #---------------------------------------------------------------------------- # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. # >> Modified for use with the LUFA project. << # # Released to the Public Domain # # Additional material for this makefile was written by: # Peter Fleury # Tim Henigan # Colin O'Flynn # Reiner Patommel # Markus Pfaff # Sander Pool # Frederik Rouleau # Carlos Lamas # Dean Camera # Opendous Inc. # Denver Gingerich # #---------------------------------------------------------------------------- # On command line: # # make all = Make software. # # make clean = Clean out built project files. # # make coff = Convert ELF to AVR COFF. # # make extcoff = Convert ELF to AVR Extended COFF. # # make program = Download the hex file to the device, using avrdude. # Please customize the avrdude settings below first! # # make dfu = Download the hex file to the device, using dfu-programmer (must # have dfu-programmer installed). # # make flip = Download the hex file to the device, using Atmel FLIP (must # have Atmel FLIP installed). # # make dfu-ee = Download the eeprom file to the device, using dfu-programmer # (must have dfu-programmer installed). # # make flip-ee = Download the eeprom file to the device, using Atmel FLIP # (must have Atmel FLIP installed). # # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # # make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. # # make filename.i = Create a preprocessed source file for use in submitting # bug reports to the GCC project. # # To rebuild project do "make clean" then "make all". #---------------------------------------------------------------------------- # MCU name MCU = at90usb1287 # Target architecture (see library "Board Types" documentation). ARCH = AVR8 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. # This will define a symbol, F_CPU, in all source code files equal to the # processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # # This will be an integer division of F_USB below, as it is sourced by # F_USB after it has run through any CPU prescalers. Note that this value # does not *change* the processor frequency - it should merely be updated to # reflect the processor speed set externally so that the code can use accurate # software delays. F_CPU = 8000000 # Input clock frequency. # This will define a symbol, F_USB, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' # at the end, this will be done automatically to create a 32-bit value in your # source code. # # If no clock division is performed on the input clock inside the AVR (via the # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) # Output format. (can be srec, ihex, binary) FORMAT = ihex # Target file name (without extension). TARGET = HIDReportViewer # Object files directory # To put object files in current directory, use a dot (.), do NOT make # this an empty or blank macro! OBJDIR = . # Path to the LUFA library LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens LUFA_OPTS = -D USB_HOST_ONLY LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" # Create the LUFA source path variables by including the LUFA root makefile include $(LUFA_PATH)/LUFA/makefile # List C source files here. (C dependencies are automatically generated.) SRC = $(TARGET).c \ $(LUFA_SRC_USB) \ $(LUFA_SRC_USBCLASS) \ $(LUFA_SRC_SERIAL) # List C++ source files here. (C dependencies are automatically generated.) CPPSRC = # List Assembler source files here. # Make them always end in a capital .S. Files ending in a lowercase .s # will not be considered source files but generated files (assembler # output from the compiler), and will be deleted upon "make clean"! # Even though the DOS/Win* filesystem matches both .s and .S the same, # it will preserve the spelling of the filenames, and gcc itself does # care about how the name is spelled on its command-line. ASRC = # Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s # Debugging format. # Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. # AVR Studio 4.10 requires dwarf-2. # AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. DEBUG = dwarf-2 # List any extra directories to look for include files here. # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. EXTRAINCDIRS = $(LUFA_PATH)/ # Compiler flag to set the C Standard level. # c89 = "ANSI" C # gnu89 = c89 plus GCC extensions # c99 = ISO C99 standard (not yet fully implemented) # gnu99 = c99 plus GCC extensions CSTANDARD = -std=c99 # Place -D or -U options here for C sources CDEFS = -DF_CPU=$(F_CPU)UL CDEFS += -DF_USB=$(F_USB)UL CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) CDEFS += $(LUFA_OPTS) # Place -D or -U options here for ASM sources ADEFS = -DF_CPU=$(F_CPU) ADEFS += -DF_USB=$(F_USB)UL ADEFS += -DBOARD=BOARD_$(BOARD) ADEFS += $(LUFA_OPTS) # Place -D or -U options here for C++ sources CPPDEFS = -DF_CPU=$(F_CPU)UL CPPDEFS += -DF_USB=$(F_USB)UL CPPDEFS += -DBOARD=BOARD_$(BOARD) CPPDEFS += $(LUFA_OPTS) #CPPDEFS += -D__STDC_LIMIT_MACROS #CPPDEFS += -D__STDC_CONSTANT_MACROS #---------------- Compiler Options C ---------------- # -g*: generate debugging information # -O*: optimization level # -f...: tuning, see GCC manual and avr-libc documentation # -Wall...: warning level # -Wa,...: tell GCC to pass this to the assembler. # -adhlns...: create assembler listing CFLAGS = -g$(DEBUG) CFLAGS += $(CDEFS) CFLAGS += -O$(OPT) CFLAGS += -funsigned-char CFLAGS += -funsigned-bitfields CFLAGS += -ffunction-sections CFLAGS += -fno-inline-small-functions CFLAGS += -fpack-struct CFLAGS += -fshort-enums CFLAGS += -fno-strict-aliasing CFLAGS += -Wall CFLAGS += -Wstrict-prototypes #CFLAGS += -mshort-calls #CFLAGS += -fno-unit-at-a-time #CFLAGS += -Wundef #CFLAGS += -Wunreachable-code #CFLAGS += -Wsign-compare CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) #---------------- Compiler Options C++ ---------------- # -g*: generate debugging information # -O*: optimization level # -f...: tuning, see GCC manual and avr-libc documentation # -Wall...: warning level # -Wa,...: tell GCC to pass this to the assembler. # -adhlns...: create assembler listing CPPFLAGS = -g$(DEBUG) CPPFLAGS += $(CPPDEFS) CPPFLAGS += -O$(OPT) CPPFLAGS += -funsigned-char CPPFLAGS += -funsigned-bitfields CPPFLAGS += -fpack-struct CPPFLAGS += -fshort-enums CPPFLAGS += -fno-exceptions CPPFLAGS += -Wall CPPFLAGS += -Wundef #CPPFLAGS += -mshort-calls #CPPFLAGS += -fno-unit-at-a-time #CPPFLAGS += -Wstrict-prototypes #CPPFLAGS += -Wunreachable-code #CPPFLAGS += -Wsign-compare CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) #---------------- Assembler Options ---------------- # -Wa,...: tell GCC to pass this to the assembler. # -adhlns: create listing # -gstabs: have the assembler create line number information; note that # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displaye
#ifndef __LINUX_NETLINK_H
#define __LINUX_NETLINK_H

#include <linux/socket.h> /* for sa_family_t */
#include <linux/types.h>

#define NETLINK_ROUTE		0	/* Routing/device hook				*/
#define NETLINK_UNUSED		1	/* Unused number				*/
#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
#define NETLINK_FIREWALL	3	/* Firewalling hook				*/
#define NETLINK_INET_DIAG	4	/* INET socket monitoring			*/
#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
#define NETLINK_XFRM		6	/* ipsec */
#define NETLINK_SELINUX		7	/* SELinux event notifications */
#define NETLINK_ISCSI		8	/* Open-iSCSI */
#define NETLINK_AUDIT		9	/* auditing */
#define NETLINK_FIB_LOOKUP	10	
#define NETLINK_CONNECTOR	11
#define NETLINK_NETFILTER	12	/* netfilter subsystem */
#define NETLINK_IP6_FW		13
#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
#define NETLINK_GENERIC		16
/* leave room for NETLINK_DM (DM Events) */
#define NETLINK_SCSITRANSPORT	18	/* SCSI Transports */
#define NETLINK_ECRYPTFS	19

#define MAX_LINKS 32		

struct sockaddr_nl
{
	sa_family_t	nl_family;	/* AF_NETLINK	*/
	unsigned short	nl_pad;		/* zero		*/
	__u32		nl_pid;		/* port ID	*/
       	__u32		nl_groups;	/* multicast groups mask */
};

struct nlmsghdr
{
	__u32		nlmsg_len;	/* Length of message including header */
	__u16		nlmsg_type;	/* Message content */
	__u16		nlmsg_flags;	/* Additional flags */
	__u32		nlmsg_seq;	/* Sequence number */
	__u32		nlmsg_pid;	/* Sending process port ID */
};

/* Flags values */

#define NLM_F_REQUEST		1	/* It is request message. 	*/
#define NLM_F_MULTI		2	/* Multipart message, terminated by NLMSG_DONE */
#define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
#define NLM_F_ECHO		8	/* Echo this request 		*/

/* Modifiers to GET request */
#define NLM_F_ROOT	0x100	/* specify tree	root	*/
#define NLM_F_MATCH	0x200	/* return all matching	*/
#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)

/* Modifiers to NEW request */
#define NLM_F_REPLACE	0x100	/* Override existing		*/
#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
#define NLM_F_APPEND	0x800	/* Add to end of list		*/

/*
   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
   4.4BSD CHANGE	NLM_F_REPLACE

   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
   Append		NLM_F_CREATE
   Check		NLM_F_EXCL
 */

#define NLMSG_ALIGNTO	4
#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
			   (nlh)->nlmsg_len <= (len))
#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))

#define NLMSG_NOOP		0x1	/* Nothing.		*/
#define NLMSG_ERROR		0x2	/* Error		*/
#define NLMSG_DONE		0x3	/* End of a dump	*/
#define NLMSG_OVERRUN		0x4	/* Data lost		*/

#define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */

struct nlmsgerr
{
	int		error;
	struct nlmsghdr msg;
};

#define NETLINK_ADD_MEMBERSHIP	1
#define NETLINK_DROP_MEMBERSHIP	2
#define NETLINK_PKTINFO		3

struct nl_pktinfo
{
	__u32	group;
};

#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/

enum {
	NETLINK_UNCONNECTED = 0,
	NETLINK_CONNECTED,
};

/*
 *  <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
 * +---------------------+- - -+- - - - - - - - - -+- - -+
 * |        Header       | Pad |     Payload       | Pad |
 * |   (struct nlattr)   | ing |                   | ing |
 * +---------------------+- - -+- - - - - - - - - -+- - -+
 *  <-------------- nlattr->nla_len -------------->
 */

struct nlattr
{
	__u16           nla_len;
	__u16           nla_type;
};

/*
 * nla_type (16 bits)
 * +---+---+-------------------------------+
 * | N | O | Attribute Type                |
 * +---+---+-------------------------------+
 * N := Carries nested attributes
 * O := Payload stored in network byte order
 *
 * Note: The N and O flag are mutually exclusive.
 */
#define NLA_F_NESTED		(1 << 15)
#define NLA_F_NET_BYTEORDER	(1 << 14)
#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)

#define NLA_ALIGNTO		4
#define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
#define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))

#endif	/* __LINUX_NETLINK_H */