path: root/package/kernel/mac80211/patches/300-pending_work.patch

commit 230ab8c1880266c9cfceac962e2d48309dea79a7
Author: Felix Fietkau <nbd@openwrt.org>
Date:   Mon May 19 21:48:56 2014 +0200

    ath9k: re-schedule rx processing after budget exceeded
    
    Should improve rx stability under load
    
    Signed-off-by: Felix Fietkau <nbd@openwrt.org>

commit 27647baeaee1b12bc3c57ccf1c7eba53bcd7fe53
Author: Felix Fietkau <nbd@openwrt.org>
Date:   Mon May 19 21:20:49 2014 +0200

    ath9k: avoid passing buffers to the hardware during flush
    
    The commit "ath9k: fix possible hang on flush" changed the receive code
    to always link rx descriptors of processed frames, even when flushing.
    In some cases, this leads to flushed rx buffers being passed to the
    hardware while rx is already stopped.
    
    Signed-off-by: Felix Fietkau <nbd@openwrt.org>

commit 92e9dd662542683856e62a5e7e43fcf5b9da5c4a
Author: Henning Rogge <hrogge@gmail.com>
Date:   Thu May 1 10:03:46 2014 +0200

    mac80211: Fix mac80211 station info rx bitrate for IBSS mode
    
    Filter out incoming multicast packages before applying their bitrate
    to the rx bitrate station info field to prevent them from setting the
    rx bitrate to the basic multicast rate.
    
    Signed-off-by: Henning Rogge <hrogge@gmail.com>

commit 4c8a3486cb577d40c1ef75f0a8dc9a04773eef83
Author: Nickolay Ledovskikh <nledovskikh@gmail.com>
Date:   Fri Apr 25 22:53:34 2014 +0400

    ath5k: Fix AR5K_PHY_TXPOWER_RATE_MAX register value setting.
    
    I was reading ath5k power setting code and
    noticed typing error in ath5k_hw_txpower function.
    Invalid value was written to AR5K_PHY_TXPOWER_RATE_MAX
    register.
    
    Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com>
    Acked-by: Nick Kossifidis <mickflemm@gmail.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

commit 4d76248013dbb1948429555208900a585b0f351d
Author: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date:   Tue Apr 8 13:38:43 2014 +0200

    ath9k: Enable DFS only when ATH9K_DFS_CERTIFIED
    
    Add DFS interface combination only when
    CONFIG_ATH9K_DFS_CERTIFIED is set. In other case
    user can run CAC/beaconing without proper handling
    of pulse events (without radar detection activated).
    
    Reported-by: Cedric Voncken <cedric.voncken@acksys.fr>
    Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

commit c83a4e5156a4b4dd22137d33a5625440982d6d37
Author: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date:   Mon Apr 28 21:17:08 2014 +0530

    ath9k_hw: fix worse EVM for 11b rates
    
    Adjust FIR filter co-efficients to improve EVM for 11b rates.
    
    Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

commit 8aab2c7a2f4a957e344db429dfb1190ae59ce8b5
Author: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date:   Mon Apr 28 21:17:07 2014 +0530

    ath9k_hw: update ar9300 initvals
    
     * rfsat gainchange hysteresis of rf_gain stuck with large
       interference present.
    
    Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

commit 8c7ae357cc5b6bd037ad2d666e9f3789cf882925
Author: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date:   Wed Apr 23 15:07:57 2014 +0530

    ath9k: fix race in setting ATH_OP_INVALID
    
    The commit "ath9k: move sc_flags to ath_common" moved setting
    ATH_OP_INVALID flag below ieee80211_register_hw. This is causing
    the flag never being cleared randomly as the drv_start is called
    prior to setting flag. Fix this by setting the flag prior to
    register_hw.
    
    Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

commit c82552c5b0cb1735dbcbad78b1ffc6d3c212dc56
Author: Tim Harvey <tharvey@gateworks.com>
Date:   Mon Apr 21 16:14:57 2014 -0700

    ath9k: add a recv budget
    
    Implement a recv budget so that in cases of high traffic we still allow other
    taskets to get processed.
    
    Without this, we can encounter a host of issues during high wireless traffic
    reception depending on system load including rcu stall's detected (ARM),
    soft lockups, failure to service critical tasks such as watchdog resets,
    and triggering of the tx stuck tasklet.
    
    The same thing was proposed previously by Ben:
     http://www.spinics.net/lists/linux-wireless/msg112891.html
    
    The only difference here is that I make sure only processed packets are counted
    in the budget by checking at the end of the rx loop.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
    Acked-by: Felix Fietkau <nbd@openwrt.org>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

commit 3a758134e66ca74a9df792616b5288b2fa2cfd7f
Author: Tim Harvey <tharvey@gateworks.com>
Date:   Mon Apr 21 16:14:56 2014 -0700

    ath9k: fix possible hang on flush
    
    If a flush is requested, make sure to clear the descriptor once we've
    processed it.
    
    This resolves a hang that will occur if all RX descriptors are full when a
    flush is requested.
    
    Signed-off-by: Tim Harvey <tharvey@gateworks.com>
    Acked-by: Felix Fietkau <nbd@openwrt.org>
    Signed-off-by: John W. Linville <linville@tuxdriver.com>

commit eefb1d6adc4c60d219182b8917e4567484ce07fc
Author: Felix Fietkau <nbd@openwrt.org>
Date:   Mon Apr 28 18:27:41 2014 +0200

    ath9k: remove tid->paused flag
    
    There are some corner cases where the driver could get stuck with a full
    tid queue that is paused, leading to a software tx queue hang.
    
    Since the tx queueing rework, pausing per-tid queues on aggregation
    session setup is no longer necessary. The driver will assign sequence
    numbers to buffered frames when a new session is established, in order
    to get the correct starting sequence number.
    
    mac80211 prevents new frames from entering the queue during setup.
    
    Signed-off-by: Felix Fietkau <nbd@openwrt.org>

commit 98a713933d8495f4078f561c1e651b738dd5b531
Author: Felix Fietkau <nbd@openwrt.org>
Date:   Sun Apr 27 14:49:03 2014 +0200

    ath9k_hw: do not lower ANI setting below default on AR913x
    
    When the amount of noise fluctuates strongly, low immunity settings
    can sometimes disrupt signal detection on AR913x chips. When that
    happens, no OFDM/CCK errors are reported anymore, and ANI tunes the
    radio to the lowest immunity settings.
    Usually rx/tx fails as well in that case.
    
    To fix this, keep noise immunity settings at or above ANI default level,
    which will keep radio parameters at or above INI values.
    
    Signed-off-by: Felix Fietkau <nbd@openwrt.org>

commit 7cbb4c021bfd1e656f5b9953a947ab3c64e4e3b0
Author: Felix Fietkau <nbd@openwrt.org>
Date:   Thu Apr 10 10:49:01 2014 +0200

    mac80211: exclude AP_VLAN interfaces from tx power calculation
    
    Their power value is initialized to zero. This patch fixes an issue
    where the configured power drops to the minimum value when AP_VLAN
    interfaces are created/removed.
    
    Cc: stable@vger.kernel.org
    Signed-off-by: Felix Fietkau <nbd@openwrt.org>

commit 0ca13e26341733bf9577287fb04a3bef0d2f5cc9
Author: Felix Fietkau <nbd@openwrt.org>
Date:   Wed Apr 9 00:07:01 2014 +0200

    mac80211: suppress BSS info change notifications for AP_VLAN
    
    Fixes warnings on tx power changes
    
    Signed-off-by: Felix Fietkau <nbd@openwrt.org>

commit ec998e5991781ecdaad0911dc64f1c8d3749c308
Author: Felix Fietkau <nbd@openwrt.org>
Date:   Tue Apr 8 23:42:17 2014 +0200

    ath9k: fix a scheduling while atomic bug in CSA handling
    
    Commit "ath9k: prepare for multi-interface CSA support" added a call to
    ieee80211_iterate_active_interfaces in atomic context (beacon tasklet),
    which is crashing.
    Use ieee80211_iterate_active_interfaces_atomic instead.
    
    Signed-off-by: Felix Fietkau <nbd@openwrt.org>

commit 93f310a38a1d81a4bc8fcd9bf29628bd721cf2ef
Author: Felix Fietkau <nbd@openwrt.org>
Date:   Sun Apr 6 23:35:28 2014 +0200

    ath9k_hw: reduce ANI firstep range for older chips
    
    Use 0-8 instead of 0-16, which is closer to the old implementation.
    Also drop the overwrite of the firstep_low parameter to improve
    stability.
    
    Signed-off-by: Felix Fietkau <nbd@openwrt.org>


--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -1004,11 +1004,9 @@ static bool ar5008_hw_ani_control_new(st
 	case ATH9K_ANI_FIRSTEP_LEVEL:{
 		u32 level = param;
 
-		value = level * 2;
+		value = level;
 		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
 			      AR_PHY_FIND_SIG_FIRSTEP, value);
-		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG_LOW,
-			      AR_PHY_FIND_SIG_FIRSTEP_LOW, value);
 
 		if (level != aniState->firstepLevel) {
 			ath_dbg(common, ANI,
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -312,10 +312,9 @@ static void ath9k_csa_update_vif(void *d
 
 void ath9k_csa_update(struct ath_softc *sc)
 {
-	ieee80211_iterate_active_interfaces(sc->hw,
-					    IEEE80211_IFACE_ITER_NORMAL,
-					    ath9k_csa_update_vif,
-					    sc);
+	ieee80211_iterate_active_interfaces_atomic(sc->hw,
+						   IEEE80211_IFACE_ITER_NORMAL,
+						   ath9k_csa_update_vif, sc);
 }
 
 void ath9k_beacon_tasklet(unsigned long data)
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -152,6 +152,8 @@ static u32 ieee80211_hw_conf_chan(struct
 	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 		if (!rcu_access_pointer(sdata->vif.chanctx_conf))
 			continue;
+		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+			continue;
 		power = min(power, sdata->vif.bss_conf.txpower);
 	}
 	rcu_read_unlock();
@@ -203,7 +205,7 @@ void ieee80211_bss_info_change_notify(st
 {
 	struct ieee80211_local *local = sdata->local;
 
-	if (!changed)
+	if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 		return;
 
 	drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed);
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -155,6 +155,9 @@ static void ath9k_hw_set_ofdm_nil(struct
 		ATH9K_ANI_RSSI_THR_LOW,
 		ATH9K_ANI_RSSI_THR_HIGH);
 
+	if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_OFDM_DEF_LEVEL)
+		immunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL;
+
 	if (!scan)
 		aniState->ofdmNoiseImmunityLevel = immunityLevel;
 
@@ -235,6 +238,9 @@ static void ath9k_hw_set_cck_nil(struct 
 		BEACON_RSSI(ah), ATH9K_ANI_RSSI_THR_LOW,
 		ATH9K_ANI_RSSI_THR_HIGH);
 
+	if (AR_SREV_9100(ah) && immunityLevel < ATH9K_ANI_CCK_DEF_LEVEL)
+		immunityLevel = ATH9K_ANI_CCK_DEF_LEVEL;
+
 	if (ah->opmode == NL80211_IFTYPE_STATION &&
 	    BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_LOW &&
 	    immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI)
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -251,7 +251,6 @@ struct ath_atx_tid {
 
 	s8 bar_index;
 	bool sched;
-	bool paused;
 	bool active;
 };
 
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -107,9 +107,6 @@ static void ath_tx_queue_tid(struct ath_
 {
 	struct ath_atx_ac *ac = tid->ac;
 
-	if (tid->paused)
-		return;
-
 	if (tid->sched)
 		return;
 
@@ -1407,7 +1404,6 @@ int ath_tx_aggr_start(struct ath_softc *
 	ath_tx_tid_change_state(sc, txtid);
 
 	txtid->active = true;
-	txtid->paused = true;
 	*ssn = txtid->seq_start = txtid->seq_next;
 	txtid->bar_index = -1;
 
@@ -1427,7 +1423,6 @@ void ath_tx_aggr_stop(struct ath_softc *
 
 	ath_txq_lock(sc, txq);
 	txtid->active = false;
-	txtid->paused = false;
 	ath_tx_flush_tid(sc, txtid);
 	ath_tx_tid_change_state(sc, txtid);
 	ath_txq_unlock_complete(sc, txq);
@@ -1487,7 +1482,7 @@ void ath_tx_aggr_wakeup(struct ath_softc
 		ath_txq_lock(sc, txq);
 		ac->clear_ps_filter = true;
 
-		if (!tid->paused && ath_tid_has_buffered(tid)) {
+		if (ath_tid_has_buffered(tid)) {
 			ath_tx_queue_tid(txq, tid);
 			ath_txq_schedule(sc, txq);
 		}
@@ -1510,7 +1505,6 @@ void ath_tx_aggr_resume(struct ath_softc
 	ath_txq_lock(sc, txq);
 
 	tid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor;
-	tid->paused = false;
 
 	if (ath_tid_has_buffered(tid)) {
 		ath_tx_queue_tid(txq, tid);
@@ -1544,8 +1538,6 @@ void ath9k_release_buffered_frames(struc
 			continue;
 
 		tid = ATH_AN_2_TID(an, i);
-		if (tid->paused)
-			continue;
 
 		ath_txq_lock(sc, tid->ac->txq);
 		while (nframes > 0) {
@@ -1844,9 +1836,6 @@ void ath_txq_schedule(struct ath_softc *
 			list_del(&tid->list);
 			tid->sched = false;
 
-			if (tid->paused)
-				continue;
-
 			if (ath_tx_sched_aggr(sc, txq, tid, &stop))
 				sent = true;
 
@@ -2698,7 +2687,6 @@ void ath_tx_node_init(struct ath_softc *
 		tid->baw_size  = WME_MAX_BA;
 		tid->baw_head  = tid->baw_tail = 0;
 		tid->sched     = false;
-		tid->paused    = false;
 		tid->active	   = false;
 		__skb_queue_head_init(&tid->buf_q);
 		__skb_queue_head_init(&tid->retry_q);
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -34,7 +34,8 @@ static inline bool ath9k_check_auto_slee
  * buffer (or rx fifo). This can incorrectly acknowledge packets
  * to a sender if last desc is self-linked.
  */
-static void ath_rx_buf_link(struct ath_softc *sc, struct ath_rxbuf *bf)
+static void ath_rx_buf_link(struct ath_softc *sc, struct ath_rxbuf *bf,
+			    bool flush)
 {
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
@@ -59,18 +60,19 @@ static void ath_rx_buf_link(struct ath_s
 			     common->rx_bufsize,
 			     0);
 
-	if (sc->rx.rxlink == NULL)
-		ath9k_hw_putrxbuf(ah, bf->bf_daddr);
-	else
+	if (sc->rx.rxlink)
 		*sc->rx.rxlink = bf->bf_daddr;
+	else if (!flush)
+		ath9k_hw_putrxbuf(ah, bf->bf_daddr);
 
 	sc->rx.rxlink = &ds->ds_link;
 }
 
-static void ath_rx_buf_relink(struct ath_softc *sc, struct ath_rxbuf *bf)
+static void ath_rx_buf_relink(struct ath_softc *sc, struct ath_rxbuf *bf,
+			      bool flush)
 {
 	if (sc->rx.buf_hold)
-		ath_rx_buf_link(sc, sc->rx.buf_hold);
+		ath_rx_buf_link(sc, sc->rx.buf_hold, flush);
 
 	sc->rx.buf_hold = bf;
 }
@@ -106,7 +108,7 @@ static void ath_opmode_init(struct ath_s
 }
 
 static bool ath_rx_edma_buf_link(struct ath_softc *sc,
-				 enum ath9k_rx_qtype qtype)
+				 enum ath9k_rx_qtype qtype, bool flush)
 {
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_rx_edma *rx_edma;
@@ -127,7 +129,8 @@ static bool ath_rx_edma_buf_link(struct 
 				ah->caps.rx_status_len, DMA_TO_DEVICE);
 
 	SKB_CB_ATHBUF(skb) = bf;
-	ath9k_hw_addrxbuf_edma(ah, bf->bf_buf_addr, qtype);
+	if (!flush)
+		ath9k_hw_addrxbuf_edma(ah, bf->bf_buf_addr, qtype);
 	__skb_queue_tail(&rx_edma->rx_fifo, skb);
 
 	return true;
@@ -145,7 +148,7 @@ static void ath_rx_addbuffer_edma(struct
 	}
 
 	list_for_each_entry_safe(bf, tbf, &sc->rx.rxbuf, list)
-		if (!ath_rx_edma_buf_link(sc, qtype))
+		if (!ath_rx_edma_buf_link(sc, qtype, false))
 			break;
 
 }
@@ -442,7 +445,7 @@ int ath_startrecv(struct ath_softc *sc)
 	sc->rx.buf_hold = NULL;
 	sc->rx.rxlink = NULL;
 	list_for_each_entry_safe(bf, tbf, &sc->rx.rxbuf, list) {
-		ath_rx_buf_link(sc, bf);
+		ath_rx_buf_link(sc, bf, false);
 	}
 
 	/* We could have deleted elements so the list may be empty now */
@@ -636,7 +639,7 @@ static bool ath_edma_get_buffers(struct 
 	if (ret == -EINVAL) {
 		/* corrupt descriptor, skip this one and the following one */
 		list_add_tail(&bf->list, &sc->rx.rxbuf);
-		ath_rx_edma_buf_link(sc, qtype);
+		ath_rx_edma_buf_link(sc, qtype, false);
 
 		skb = skb_peek(&rx_edma->rx_fifo);
 		if (skb) {
@@ -645,7 +648,7 @@ static bool ath_edma_get_buffers(struct 
 
 			__skb_unlink(skb, &rx_edma->rx_fifo);
 			list_add_tail(&bf->list, &sc->rx.rxbuf);
-			ath_rx_edma_buf_link(sc, qtype);
+			ath_rx_edma_buf_link(sc, qtype, false);
 		}
 
 		bf = NULL;
@@ -975,6 +978,7 @@ int ath_rx_tasklet(struct ath_softc *sc,
 	u64 tsf = 0;
 	unsigned long flags;
 	dma_addr_t new_buf_addr;
+	unsigned int budget = 512;
 
 	if (edma)
 		dma_type = DMA_BIDIRECTIONAL;
@@ -1113,15 +1117,17 @@ requeue_drop_frag:
 		}
 requeue:
 		list_add_tail(&bf->list, &sc->rx.rxbuf);
-		if (flush)
-			continue;
 
 		if (edma) {
-			ath_rx_edma_buf_link(sc, qtype);
+			ath_rx_edma_buf_link(sc, qtype, flush);
 		} else {
-			ath_rx_buf_relink(sc, bf);
-			ath9k_hw_rxena(ah);
+			ath_rx_buf_relink(sc, bf, flush);
+			if (!flush)
+				ath9k_hw_rxena(ah);
 		}
+
+		if (!budget--)
+			break;
 	} while (1);
 
 	if (!(ah->imask & ATH9K_INT_RXEOL)) {
@@ -1129,5 +1135,5 @@ requeue:
 		ath9k_hw_set_interrupts(ah);
 	}
 
-	return 0;
+	return !budget;
 }
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -86,7 +86,6 @@ static int ath_ahb_probe(struct platform
 	int irq;
 	int ret = 0;
 	struct ath_hw *ah;
-	struct ath_common *common;
 	char hw_name[64];
 
 	if (!dev_get_platdata(&pdev->dev)) {
@@ -146,9 +145,6 @@ static int ath_ahb_probe(struct platform
 	wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n",
 		   hw_name, (unsigned long)mem, irq);
 
-	common = ath9k_hw_common(sc->sc_ah);
-	/* Will be cleared in ath9k_start() */
-	set_bit(ATH_OP_INVALID, &common->op_flags);
 	return 0;
 
  err_irq:
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -670,6 +670,7 @@ static const struct ieee80211_iface_comb
 		.num_different_channels = 1,
 		.beacon_int_infra_match = true,
 	},
+#ifdef CONFIG_ATH9K_DFS_CERTIFIED
 	{
 		.limits = if_dfs_limits,
 		.n_limits = ARRAY_SIZE(if_dfs_limits),
@@ -679,6 +680,7 @@ static const struct ieee80211_iface_comb
 		.radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) |
 					BIT(NL80211_CHAN_WIDTH_20),
 	}
+#endif
 };
 
 static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
@@ -781,6 +783,9 @@ int ath9k_init_device(u16 devid, struct 
 	common = ath9k_hw_common(ah);
 	ath9k_set_hw_capab(sc, hw);
 
+	/* Will be cleared in ath9k_start() */
+	set_bit(ATH_OP_INVALID, &common->op_flags);
+
 	/* Initialize regulatory */
 	error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
 			      ath9k_reg_notifier);
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -784,7 +784,6 @@ static int ath_pci_probe(struct pci_dev 
 {
 	struct ath_softc *sc;
 	struct ieee80211_hw *hw;
-	struct ath_common *common;
 	u8 csz;
 	u32 val;
 	int ret = 0;
@@ -877,10 +876,6 @@ static int ath_pci_probe(struct pci_dev 
 	wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n",
 		   hw_name, (unsigned long)sc->mem, pdev->irq);
 
-	/* Will be cleared in ath9k_start() */
-	common = ath9k_hw_common(sc->sc_ah);
-	set_bit(ATH_OP_INVALID, &common->op_flags);
-
 	return 0;
 
 err_init:
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -410,7 +410,7 @@ static const u32 ar9300_2p2_baseband_cor
 	{0x00009e30, 0x06336f77},
 	{0x00009e34, 0x6af6532f},
 	{0x00009e38, 0x0cc80c00},
-	{0x00009e40, 0x0d261820},
+	{0x00009e40, 0x0d261800},
 	{0x00009e4c, 0x00001004},
 	{0x00009e50, 0x00ff03f1},
 	{0x00009e54, 0x00000000},
--- a/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h
@@ -592,7 +592,7 @@ static const u32 ar9331_1p1_baseband_cor
 	{0x00009e30, 0x06336f77},
 	{0x00009e34, 0x6af6532f},
 	{0x00009e38, 0x0cc80c00},
-	{0x00009e40, 0x0d261820},
+	{0x00009e40, 0x0d261800},
 	{0x00009e4c, 0x00001004},
 	{0x00009e50, 0x00ff03f1},
 	{0x00009fc0, 0x803e4788},
--- a/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h
@@ -231,7 +231,7 @@ static const u32 ar9331_1p2_baseband_cor
 	{0x00009e30, 0x06336f77},
 	{0x00009e34, 0x6af6532f},
 	{0x00009e38, 0x0cc80c00},
-	{0x00009e40, 0x0d261820},
+	{0x00009e40, 0x0d261800},
 	{0x00009e4c, 0x00001004},
 	{0x00009e50, 0x00ff03f1},
 	{0x00009fc0, 0x803e4788},
--- a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h
@@ -318,7 +318,7 @@ static const u32 ar9340_1p0_baseband_cor
 	{0x00009e30, 0x06336f77},
 	{0x00009e34, 0x6af6532f},
 	{0x00009e38, 0x0cc80c00},
-	{0x00009e40, 0x0d261820},
+	{0x00009e40, 0x0d261800},
 	{0x00009e4c, 0x00001004},
 	{0x00009e50, 0x00ff03f1},
 	{0x00009e54, 0x00000000},
@@ -348,9 +348,9 @@ static const u32 ar9340_1p0_baseband_cor
 	{0x0000a370, 0x00000000},
 	{0x0000a390, 0x00000001},
 	{0x0000a394, 0x00000444},
-	{0x0000a398, 0x00000000},
-	{0x0000a39c, 0x210d0401},
-	{0x0000a3a0, 0xab9a7144},
+	{0x0000a398, 0x001f0e0f},
+	{0x0000a39c, 0x0075393f},
+	{0x0000a3a0, 0xb79f6427},
 	{0x0000a3a4, 0x00000000},
 	{0x0000a3a8, 0xaaaaaaaa},
 	{0x0000a3ac, 0x3c466478},
--- a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h
@@ -90,7 +90,7 @@ static const u32 ar9580_1p0_baseband_cor
 	{0x00009e30, 0x06336f77},
 	{0x00009e34, 0x6af6532f},
 	{0x00009e38, 0x0cc80c00},
-	{0x00009e40, 0x0d261820},
+	{0x00009e40, 0x0d261800},
 	{0x00009e4c, 0x00001004},
 	{0x00009e50, 0x00ff03f1},
 	{0x00009e54, 0x00000000},
--- a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
@@ -257,9 +257,9 @@ static const u32 qca953x_1p0_baseband_co
 	{0x0000a370, 0x00000000},
 	{0x0000a390, 0x00000001},
 	{0x0000a394, 0x00000444},
-	{0x0000a398, 0x1f020503},
-	{0x0000a39c, 0x29180c03},
-	{0x0000a3a0, 0x9a8b6844},
+	{0x0000a398, 0x001f0e0f},
+	{0x0000a39c, 0x0075393f},
+	{0x0000a3a0, 0xb79f6427},
 	{0x0000a3a4, 0x000000ff},
 	{0x0000a3a8, 0x6a6a6a6a},
 	{0x0000a3ac, 0x6a6a6a6a},
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -3709,8 +3709,8 @@ ath5k_hw_txpower(struct ath5k_hw *ah, st
 			AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP),
 			AR5K_TPC);
 	} else {
-		ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX |
-			AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX);
+		ath5k_hw_reg_write(ah, AR5K_TUNE_MAX_TXPOWER,
+			AR5K_PHY_TXPOWER_RATE_MAX);
 	}
 
 	return 0;
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1231,7 +1231,8 @@ ieee80211_rx_h_sta_process(struct ieee80
 		if (ether_addr_equal(bssid, rx->sdata->u.ibss.bssid) &&
 		    test_sta_flag(sta, WLAN_STA_AUTHORIZED)) {
 			sta->last_rx = jiffies;
-			if (ieee80211_is_data(hdr->frame_control)) {
+			if (ieee80211_is_data(hdr->frame_control) &&
+			    !is_multicast_ether_addr(hdr->addr1)) {
 				sta->last_rx_rate_idx = status->rate_idx;
 				sta->last_rx_rate_flag = status->flag;
 				sta->last_rx_rate_vht_flag = status->vht_flag;
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -442,6 +442,8 @@ void ath9k_tasklet(unsigned long data)
 	ath9k_ps_wakeup(sc);
 	spin_lock(&sc->sc_pcu_lock);
 
+	sc->intrstatus = 0;
+
 	if (status & ATH9K_INT_FATAL) {
 		type = RESET_TYPE_FATAL_INT;
 		ath9k_queue_reset(sc, type);
@@ -510,10 +512,12 @@ void ath9k_tasklet(unsigned long data)
 	if (status & rxmask) {
 		/* Check for high priority Rx first */
 		if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
-		    (status & ATH9K_INT_RXHP))
-			ath_rx_tasklet(sc, 0, true);
+		    (status & ATH9K_INT_RXHP) &&
+		    ath_rx_tasklet(sc, 0, true))
+			sc->intrstatus |= ATH9K_INT_RXHP;
 
-		ath_rx_tasklet(sc, 0, false);
+		if (ath_rx_tasklet(sc, 0, false))
+			sc->intrstatus |= ATH9K_INT_RXLP;
 	}
 
 	if (status & ATH9K_INT_TX) {
@@ -541,6 +545,9 @@ void ath9k_tasklet(unsigned long data)
 
 	/* re-enable hardware interrupt */
 	ath9k_hw_enable_interrupts(ah);
+	if (sc->intrstatus)
+		tasklet_schedule(&sc->intr_tq);
+
 out:
 	spin_unlock(&sc->sc_pcu_lock);
 	ath9k_ps_restore(sc);
@@ -607,7 +614,7 @@ irqreturn_t ath_isr(int irq, void *dev)
 		return IRQ_NONE;
 
 	/* Cache the status */
-	sc->intrstatus = status;
+	sc->intrstatus |= status;
 
 	if (status & SCHED_INTR)
 		sched = true;