#include "ch.h"
#include "hal.h"
#include "test.h"
#include "evtimer.h"
#include "buzzer.h"
#include "ff.h"
/**
* @brief FS object.
*/
FATFS MMC_FS;
/**
* MMC driver instance.
*/
MMCDriver MMCD1;
/* FS mounted and ready.*/
static bool_t fs_ready = FALSE;
/* Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0).*/
static SPIConfig hs_spicfg = {
NULL,
IOPORT1,
PA_SSEL1,
CR0_DSS8BIT | CR0_FRFSPI | CR0_CLOCKRATE(0),
2
};
/* Low speed SPI configuration (281.250KHz, CPHA=0, CPOL=0).*/
static SPIConfig ls_spicfg = {
NULL,
IOPORT1,
PA_SSEL1,
CR0_DSS8BIT | CR0_FRFSPI | CR0_CLOCKRATE(0),
254
};
/* Card insertion verification.*/
static bool_t mmc_is_inserted(void) {
return !palReadPad(IOPORT2, PB_CP1);
}
/* Card protection verification.*/
static bool_t mmc_is_protected(void) {
return palReadPad(IOPORT2, PB_WP1);
}
/* Generic large buffer.*/
uint8_t fbuff[1024];
/*
* Red LEDs blinker thread, times are in milliseconds.
*/
static WORKING_AREA(waThread1, 128);
static msg_t Thread1(void *arg) {
(void)arg;
chRegSetThreadName("blinker1");
while (TRUE) {
palClearPort(IOPORT1, PAL_PORT_BIT(PA_LED2));
chThdSleepMilliseconds(200);
palSetPort(IOPORT1, PAL_PORT_BIT(PA_LED1) | PAL_PORT_BIT(PA_LED2));
chThdSleepMilliseconds(800);
palClearPort(IOPORT1, PAL_PORT_BIT(PA_LED1));
chThdSleepMilliseconds(200);
palSetPort(IOPORT1, PAL_PORT_BIT(PA_LED1) | PAL_PORT_BIT(PA_LED2));
chThdSleepMilliseconds(800);
}
return 0;
}
/*
* Yellow LED blinker thread, times are in milliseconds.
*/
static WORKING_AREA(waThread2, 128);
static msg_t Thread2(void *arg) {
(void)arg;
chRegSetThreadName("blinker2");
while (TRUE) {
palClearPad(IOPORT1, PA_LEDUSB);
chThdSleepMilliseconds(200);
palSetPad(IOPORT1, PA_LEDUSB);
chThdSleepMilliseconds(300);
}
return 0;
}
static FRESULT scan_files(char *path)
{
FRESULT res;
FILINFO fno;
DIR dir;
int i;
char *fn;
res = f_opendir(&dir, path);
if (res == FR_OK) {
i = strlen(path);
for (;;) {
res = f_readdir(&dir, &fno);
if (res != FR_OK || fno.fname[0] == 0)
break;
if (fno.fname[0] == '.')
continue;
fn = fno.fname;
if (fno.fattrib & AM_DIR) {
siprintf(&path[i], "/%s", fn);
res = scan_files(path);
if (res != FR_OK)
break;
path[i] = 0;
}
else {
iprintf("%s/%s\r\n", path, fn);
}
}
}
return res;
}
/*
* Executed as event handler at 500mS intervals.
*/
static void TimerHandler(eventid_t id) {
(void)id;
if (!palReadPad(IOPORT1, PA_BUTTON1)) {
if (fs_ready) {
FRESULT err;
uint32_t clusters;
FATFS *fsp;
err = f_getfree("/", &clusters, &fsp);
if (err != FR_OK) {
iprintf("FS: f_getfree() failed\r\n");
return;
}
iprintf("FS: %lu free clusters, %u sectors per cluster, %lu bytes free\r\n",
clusters, MMC_FS.csize,
clusters * (uint32_t)MMC_FS.csize * (uint32_t)MMC_SECTOR_SIZE);
fbuff[0] = 0;
scan_files((char *)fbuff);
}
}
else if (!palReadPad(IOPORT1, PA_BUTTON2)) {
static WORKING_AREA(waTestThread, 256);
Thread *tp = chThdCreateStatic(waTestThread, sizeof(waTestThread),
NORMALPRIO, TestThread, &SD1);
chThdWait(tp);
buzzPlay(500, MS2ST(100));
}
}
/*
* MMC card insertion event.
*/
static void InsertHandler(eventid_t id) {
FRESULT err;
(void)id;
buzzPlayWait(1000, MS2ST(100));
buzzPlayWait(2000, MS2ST(100));
iprintf("MMC: inserted\r\n");
/*
* On insertion MMC initialization and FS mount.
*/
iprintf("MMC: initialization ");
if (mmcConnect(&MMCD1)) {
iprintf("failed\r\n");
return;
}
iprintf("ok\r\n");
iprintf("FS: mount ");
err = f_mount(0, &MMC_FS);
if (err != FR_OK) {
iprintf("failed\r\n");
mmcDisconnect(&MMCD1);
return;
}
fs_ready = TRUE;
iprintf("ok\r\n");
buzzPlay(440, MS2ST(200));
}
/*
* MMC card removal event.
*/
static void RemoveHandler(eventid_t id) {
(void)id;
iprintf("MMC: removed\r\n");
fs_ready = FALSE;
buzzPlayWait(2000, MS2ST(100));
buzzPlayWait(1000, MS2ST(100));
}
/*
* Application entry point.
*/
int main(void) {
static const evhandler_t evhndl[] = {
TimerHandler,
InsertHandler,
RemoveHandler
};
static EvTimer evt;
struct EventListener el0, el1, el2;
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the serial driver 2 using the driver default configuration.
*/
sdStart(&SD1, NULL);
/*
* Buzzer driver initialization.
*/
buzzInit();
/*
* Initializes the MMC driver to work with SPI2.
*/
mmcObjectInit(&MMCD1, &SPID1,
&ls_spicfg, &hs_spicfg,
mmc_is_protected, mmc_is_inserted);
mmcStart(&MMCD1, NULL);
/*
* Creates the blinker threads.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
/*
* Normal main() thread activity, in this demo it does nothing except
* sleeping in a loop and listen for events.
*/
evtInit(&evt, MS2ST(500)); /* Initializes an event timer object. */
evtStart(&evt); /* Starts the event timer. */
chEvtRegister(&evt.et_es, &el0, 0); /* Registers on the timer event source. */
chEvtRegister(&MMCD1.inserted_event, &el1, 1);
chEvtRegister(&MMCD1.removed_event, &el2, 2);
while (TRUE)// chThdSleepMilliseconds(50);
chEvtDispatch(evhndl, chEvtWaitOne(ALL_EVENTS));
return 0;
}
7
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
#
# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
BLOCK_MENU:=Block Devices
define KernelPackage/aoe
SUBMENU:=$(BLOCK_MENU)
TITLE:=ATA over Ethernet support
KCONFIG:=CONFIG_ATA_OVER_ETH
FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
AUTOLOAD:=$(call AutoLoad,30,aoe)
endef
define KernelPackage/aoe/description
Kernel support for ATA over Ethernet
endef
$(eval $(call KernelPackage,aoe))
define KernelPackage/ata-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=Serial and Parallel ATA support
DEPENDS:=@PCI_SUPPORT +kmod-scsi-core
KCONFIG:=CONFIG_ATA
FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
endef
$(eval $(call KernelPackage,ata-core))
define AddDepends/ata
SUBMENU:=$(BLOCK_MENU)
DEPENDS+=kmod-ata-core $(1)
endef
define KernelPackage/ata-ahci
TITLE:=AHCI Serial ATA support
KCONFIG:=CONFIG_SATA_AHCI
FILES:= \
$(LINUX_DIR)/drivers/ata/ahci.ko \
$(LINUX_DIR)/drivers/ata/libahci.ko
AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-ahci/description
Support for AHCI Serial ATA controllers
endef
$(eval $(call KernelPackage,ata-ahci))
define KernelPackage/ata-artop
TITLE:=ARTOP 6210/6260 PATA support
KCONFIG:=CONFIG_PATA_ARTOP
FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-artop/description
PATA support for ARTOP 6210/6260 host controllers
endef
$(eval $(call KernelPackage,ata-artop))
define KernelPackage/ata-imx
TITLE:=Freescale i.MX AHCI SATA support
DEPENDS:=@TARGET_imx6
KCONFIG:=\
CONFIG_AHCI_IMX \
CONFIG_SATA_AHCI_PLATFORM \
CONFIG_PATA_IMX=n
FILES:=$(LINUX_DIR)/drivers/ata/ahci_imx.ko
AUTOLOAD:=$(call AutoLoad,41,ahci_imx,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-imx/description
SATA support for the Freescale i.MX6 SoC's onboard AHCI SATA
endef
$(eval $(call KernelPackage,ata-imx))
define KernelPackage/ata-marvell-sata
TITLE:=Marvell Serial ATA support
KCONFIG:=CONFIG_SATA_MV
FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-marvell-sata/description
SATA support for marvell chipsets
endef
$(eval $(call KernelPackage,ata-marvell-sata))
define KernelPackage/ata-nvidia-sata
TITLE:=Nvidia Serial ATA support
KCONFIG:=CONFIG_SATA_NV
FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
$(call AddDepends/ata)
endef
$(eval $(call KernelPackage,ata-nvidia-sata))
define KernelPackage/ata-pdc202xx-old
SUBMENU:=$(BLOCK_MENU)
TITLE:=Older Promise PATA controller support
DEPENDS:=kmod-ata-core
KCONFIG:= \
CONFIG_ATA_SFF=y \
CONFIG_PATA_PDC_OLD
FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
endef
define KernelPackage/ata-pdc202xx-old/description
This option enables support for the Promise 20246, 20262, 20263,
20265 and 20267 adapters
endef
$(eval $(call KernelPackage,ata-pdc202xx-old))
define KernelPackage/ata-piix
TITLE:=Intel PIIX PATA/SATA support
KCONFIG:=CONFIG_ATA_PIIX
FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-piix/description
SATA support for Intel ICH5/6/7/8 series host controllers and
PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers
endef
$(eval $(call KernelPackage,ata-piix))
define KernelPackage/ata-sil
TITLE:=Silicon Image SATA support
KCONFIG:=CONFIG_SATA_SIL
FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-sil/description
Support for Silicon Image Serial ATA controllers
endef
$(eval $(call KernelPackage,ata-sil))
define KernelPackage/ata-sil24
TITLE:=Silicon Image 3124/3132 SATA support
KCONFIG:=CONFIG_SATA_SIL24
FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-sil24/description
Support for Silicon Image 3124/3132 Serial ATA controllers
endef
$(eval $(call KernelPackage,ata-sil24))
define KernelPackage/ata-via-sata
TITLE:=VIA SATA support
KCONFIG:=CONFIG_SATA_VIA
FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-via-sata/description
This option enables support for VIA Serial ATA
endef
$(eval $(call KernelPackage,ata-via-sata))
define KernelPackage/block2mtd
SUBMENU:=$(BLOCK_MENU)
TITLE:=Block device MTD emulation
KCONFIG:=CONFIG_MTD_BLOCK2MTD
FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
endef
$(eval $(call KernelPackage,block2mtd))
define KernelPackage/dm
SUBMENU:=$(BLOCK_MENU)
TITLE:=Device Mapper
DEPENDS:=+kmod-crypto-manager
# All the "=n" are unnecessary, they're only there
# to stop the config from asking the question.
# MIRROR is M because I've needed it for pvmove.
KCONFIG:= \
CONFIG_BLK_DEV_MD=n \
CONFIG_DM_DEBUG=n \
CONFIG_DM_UEVENT=n \
CONFIG_DM_DELAY=n \
CONFIG_DM_MULTIPATH=n \
CONFIG_DM_ZERO=n \
CONFIG_DM_SNAPSHOT=n \
CONFIG_DM_LOG_USERSPACE=n \
CONFIG_MD=y \
CONFIG_BLK_DEV_DM \
CONFIG_DM_CRYPT \
CONFIG_DM_MIRROR
FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
endef
define KernelPackage/dm/description
Kernel module necessary for LVM2 support
endef
$(eval $(call KernelPackage,dm))
define KernelPackage/md-mod
SUBMENU:=$(BLOCK_MENU)
TITLE:=MD RAID
KCONFIG:= \
CONFIG_MD=y \
CONFIG_BLK_DEV_MD=m \
CONFIG_MD_AUTODETECT=y \
CONFIG_MD_FAULTY=n
FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
AUTOLOAD:=$(call AutoLoad,27,md-mod)
endef
define KernelPackage/md-mod/description
Kernel RAID md module (md-mod.ko).
You will need to select at least one RAID level module below.
endef
$(eval $(call KernelPackage,md-mod))
define KernelPackage/md/Depends
SUBMENU:=$(BLOCK_MENU)
DEPENDS:=kmod-md-mod $(1)
endef
define KernelPackage/md-linear
$(call KernelPackage/md/Depends,)
TITLE:=RAID Linear Module
KCONFIG:=CONFIG_MD_LINEAR
FILES:=$(LINUX_DIR)/drivers/md/linear.ko
AUTOLOAD:=$(call AutoLoad,28,linear)
endef
define KernelPackage/md-linear/description
RAID "Linear" or "Append" driver module (linear.ko)
endef
$(eval $(call KernelPackage,md-linear))
define KernelPackage/md-raid0
$(call KernelPackage/md/Depends,)
TITLE:=RAID0 Module
KCONFIG:=CONFIG_MD_RAID0
FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
AUTOLOAD:=$(call AutoLoad,28,raid0)
endef
define KernelPackage/md-raid0/description
RAID Level 0 (Striping) driver module (raid0.ko)
endef
$(eval $(call KernelPackage,md-raid0))
define KernelPackage/md-raid1
$(call KernelPackage/md/Depends,)
TITLE:=RAID1 Module
KCONFIG:=CONFIG_MD_RAID1
FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
AUTOLOAD:=$(call AutoLoad,28,raid1)
endef
define KernelPackage/md-raid1/description
RAID Level 1 (Mirroring) driver (raid1.ko)
endef
$(eval $(call KernelPackage,md-raid1))
define KernelPackage/md-raid10
$(call KernelPackage/md/Depends,)
TITLE:=RAID10 Module
KCONFIG:=CONFIG_MD_RAID10
FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
AUTOLOAD:=$(call AutoLoad,28,raid10)
endef
define KernelPackage/md-raid10/description
RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
endef
$(eval $(call KernelPackage,md-raid10))
define KernelPackage/md-raid456
$(call KernelPackage/md/Depends,+kmod-lib-raid6 +kmod-lib-xor)
TITLE:=RAID Level 456 Driver
KCONFIG:= \
CONFIG_ASYNC_CORE \
CONFIG_ASYNC_MEMCPY \
CONFIG_ASYNC_XOR \
CONFIG_ASYNC_PQ \
CONFIG_ASYNC_RAID6_RECOV \
CONFIG_ASYNC_RAID6_TEST=n \
CONFIG_MD_RAID456 \
CONFIG_MULTICORE_RAID456=n
FILES:= \
$(LINUX_DIR)/crypto/async_tx/async_tx.ko \
$(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
$(LINUX_DIR)/crypto/async_tx/async_xor.ko \
$(LINUX_DIR)/crypto/async_tx/async_pq.ko \
$(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
$(LINUX_DIR)/drivers/md/raid456.ko
AUTOLOAD:=$(call AutoLoad,28, async_tx async_memcpy async_xor async_pq async_raid6_recov raid456)
endef
define KernelPackage/md-raid456/description
RAID Level 4,5,6 kernel module (raid456.ko)
Includes the following modules required by
raid456.ko:
xor.ko
async_tx.ko
async_xor.ko
async_memcpy.ko
async_pq.ko
async_raid5_recov.ko
raid6_pq.ko
endef
$(eval $(call KernelPackage,md-raid456))
define KernelPackage/md-multipath
$(call KernelPackage/md/Depends,)
TITLE:=MD Multipath Module
KCONFIG:=CONFIG_MD_MULTIPATH
FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
AUTOLOAD:=$(call AutoLoad,29,multipath)
endef
define KernelPackage/md-multipath/description
Multipath driver module (multipath.ko)
endef
$(eval $(call KernelPackage,md-multipath))
define KernelPackage/ide-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=IDE (ATA/ATAPI) device support
DEPENDS:=@PCI_SUPPORT
KCONFIG:= \
CONFIG_IDE \
CONFIG_BLK_DEV_IDE \
CONFIG_BLK_DEV_IDEDISK \
CONFIG_IDE_GD \
CONFIG_IDE_GD_ATA=y \
CONFIG_IDE_GD_ATAPI=n \
CONFIG_IDEPCI_PCIBUS_ORDER=y \
CONFIG_BLK_DEV_IDEDMA_PCI=y \
CONFIG_BLK_DEV_IDEPCI=y
FILES:= \
$(LINUX_DIR)/drivers/ide/ide-core.ko \
$(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
endef
define KernelPackage/ide-core/description
Kernel support for IDE, useful for usb mass storage devices (e.g. on WL-HDD)
Includes:
- ide-core
- ide-gd_mod
endef
$(eval $(call KernelPackage,ide-core))
define AddDepends/ide
SUBMENU:=$(BLOCK_MENU)
DEPENDS+=kmod-ide-core $(1)
endef
define KernelPackage/ide-generic
SUBMENU:=$(BLOCK_MENU)
DEPENDS:=@PCI_SUPPORT
TITLE:=Kernel support for generic PCI IDE chipsets
KCONFIG:=CONFIG_BLK_DEV_GENERIC
FILES:=$(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
AUTOLOAD:=$(call AutoLoad,30,ide-pci-generic,1)
$(call AddDepends/ide)
endef
$(eval $(call KernelPackage,ide-generic))
define KernelPackage/ide-generic-old
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for generic (legacy) IDE chipsets
KCONFIG:=CONFIG_IDE_GENERIC
FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.ko
AUTOLOAD:=$(call AutoLoad,30,ide-generic,1)
$(call AddDepends/ide)
endef
$(eval $(call KernelPackage,ide-generic-old))
define KernelPackage/ide-aec62xx
TITLE:=Acard AEC62xx IDE driver
DEPENDS:=@PCI_SUPPORT
KCONFIG:=CONFIG_BLK_DEV_AEC62XX
FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.ko
AUTOLOAD:=$(call AutoLoad,30,aec62xx,1)
$(call AddDepends/ide)
endef
define KernelPackage/ide-aec62xx/description
Support for Acard AEC62xx (Artop ATP8xx) IDE controllers
endef
$(eval $(call KernelPackage,ide-aec62xx,1))
define KernelPackage/ide-pdc202xx
TITLE:=Promise PDC202xx IDE driver
DEPENDS:=@PCI_SUPPORT
KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.ko
AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old,1)
$(call AddDepends/ide)
endef
define KernelPackage/ide-pdc202xx/description
Support for the Promise Ultra 33/66/100 (PDC202{46|62|65|67|68}) IDE
controllers.
endef
$(eval $(call KernelPackage,ide-pdc202xx))
define KernelPackage/ide-it821x
TITLE:=ITE IT821x IDE driver
DEPENDS:=@PCI_SUPPORT
KCONFIG:=CONFIG_BLK_DEV_IT821X
FILES=$(LINUX_DIR)/drivers/ide/it821x.ko
AUTOLOAD:=$(call AutoLoad,30,it821x,1)
$(call AddDepends/ide)
endef
define KernelPackage/ide-it821x/description
Kernel module for the ITE IDE821x IDE controllers
endef
$(eval $(call KernelPackage,ide-it821x))
define KernelPackage/libsas
SUBMENU:=$(BLOCK_MENU)
DEPENDS:=@TARGET_x86
TITLE:=SAS Domain Transport Attributes
KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
CONFIG_SCSI_SAS_ATTRS \
CONFIG_SCSI_SAS_ATA=y \
CONFIG_SCSI_SAS_HOST_SMP=y \
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
FILES:= \
$(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
$(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
endef
define KernelPackage/libsas/description
SAS Domain Transport Attributes support
endef
$(eval $(call KernelPackage,libsas,1))
define KernelPackage/loop
SUBMENU:=$(BLOCK_MENU)
TITLE:=Loopback device support
KCONFIG:= \
CONFIG_BLK_DEV_LOOP \
CONFIG_BLK_DEV_CRYPTOLOOP=n
FILES:=$(LINUX_DIR)/drivers/block/loop.ko
AUTOLOAD:=$(call AutoLoad,30,loop)
endef
define KernelPackage/loop/description
Kernel module for loopback device support
endef
$(eval $(call KernelPackage,loop))
define KernelPackage/mvsas
SUBMENU:=$(BLOCK_MENU)
TITLE:=Marvell 88SE6440 SAS/SATA driver
DEPENDS:=@TARGET_x86 +kmod-libsas
KCONFIG:= \
CONFIG_SCSI_MVSAS \
CONFIG_SCSI_MVSAS_TASKLET=n
FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
endef
define KernelPackage/mvsas/description
Kernel support for the Marvell SAS SCSI adapters
endef
$(eval $(call KernelPackage,mvsas))
define KernelPackage/nbd
SUBMENU:=$(BLOCK_MENU)
TITLE:=Network block device support
KCONFIG:=CONFIG_BLK_DEV_NBD
FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
AUTOLOAD:=$(call AutoLoad,30,nbd)
endef
define KernelPackage/nbd/description
Kernel module for network block device support
endef
$(eval $(call KernelPackage,nbd))
define KernelPackage/scsi-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=SCSI device support
KCONFIG:= \
CONFIG_SCSI \
CONFIG_BLK_DEV_SD
FILES:= \
$(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.ko) \
$(LINUX_DIR)/drivers/scsi/sd_mod.ko
AUTOLOAD:=$(call AutoLoad,40,sd_mod,1)
endef
$(eval $(call KernelPackage,scsi-core))
define KernelPackage/scsi-generic
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for SCSI generic
DEPENDS:=+kmod-scsi-core
KCONFIG:= \
CONFIG_CHR_DEV_SG
FILES:= \
$(LINUX_DIR)/drivers/scsi/sg.ko
AUTOLOAD:=$(call AutoLoad,65,sg)
endef
$(eval $(call KernelPackage,scsi-generic))
define KernelPackage/scsi-cdrom
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for CD / DVD drives
DEPENDS:=+kmod-scsi-core
KCONFIG:= \
CONFIG_BLK_DEV_SR \
CONFIG_BLK_DEV_SR_VENDOR=n
FILES:= \
$(LINUX_DIR)/drivers/cdrom/cdrom.ko \
$(LINUX_DIR)/drivers/scsi/sr_mod.ko
AUTOLOAD:=$(call AutoLoad,45,sr_mod)
endef
$(eval $(call KernelPackage,scsi-cdrom))
|