path: root/package/boot/uboot-layerscape/patches/0039-armv8-ls1012a-Add-support-of-ls1012afrdm-board.patch

From 6aaa5973b9ae8452a546e0666b2389bb163fb949 Mon Sep 17 00:00:00 2001
From: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
Date: Thu, 19 May 2016 16:45:27 +0530
Subject: [PATCH 39/93] armv8: ls1012a: Add support of ls1012afrdm board

QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance
development platform, with a complete debugging environment.
The LS1012AFRDM board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
---
 arch/arm/Kconfig                          |   10 ++
 arch/arm/dts/Makefile                     |    3 +-
 arch/arm/dts/fsl-ls1012a-frdm.dts         |   16 +++
 arch/arm/dts/fsl-ls1012a-frdm.dtsi        |   39 ++++++
 board/freescale/ls1012afrdm/Kconfig       |   15 +++
 board/freescale/ls1012afrdm/MAINTAINERS   |    6 +
 board/freescale/ls1012afrdm/Makefile      |    7 ++
 board/freescale/ls1012afrdm/README        |   94 +++++++++++++++
 board/freescale/ls1012afrdm/ls1012afrdm.c |  183 +++++++++++++++++++++++++++++
 configs/ls1012afrdm_qspi_defconfig        |   10 ++
 include/configs/ls1012afrdm.h             |   59 ++++++++++
 11 files changed, 441 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/fsl-ls1012a-frdm.dts
 create mode 100644 arch/arm/dts/fsl-ls1012a-frdm.dtsi
 create mode 100644 board/freescale/ls1012afrdm/Kconfig
 create mode 100644 board/freescale/ls1012afrdm/MAINTAINERS
 create mode 100644 board/freescale/ls1012afrdm/Makefile
 create mode 100644 board/freescale/ls1012afrdm/README
 create mode 100644 board/freescale/ls1012afrdm/ls1012afrdm.c
 create mode 100644 configs/ls1012afrdm_qspi_defconfig
 create mode 100644 include/configs/ls1012afrdm.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b536684..23fce38 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -669,6 +669,15 @@ config TARGET_LS1012ARDB
 	  development platform that supports the QorIQ LS1012A
 	  Layerscape Architecture processor.
 
+config TARGET_LS1012AFRDM
+	bool "Support ls1012afrdm"
+	select ARM64
+	help
+	  Support for Freescale LS1012AFRDM platform.
+	  The LS1012A Freedom  board (FRDM) is a high-performance
+	  development platform that supports the QorIQ LS1012A
+	  Layerscape Architecture processor.
+
 config TARGET_LS1021AQDS
 	bool "Support ls1021aqds"
 	select CPU_V7
@@ -816,6 +825,7 @@ source "board/freescale/ls1021atwr/Kconfig"
 source "board/freescale/ls1043ardb/Kconfig"
 source "board/freescale/ls1012aqds/Kconfig"
 source "board/freescale/ls1012ardb/Kconfig"
+source "board/freescale/ls1012afrdm/Kconfig"
 source "board/freescale/mx23evk/Kconfig"
 source "board/freescale/mx25pdk/Kconfig"
 source "board/freescale/mx28evk/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9e8137b..de023b4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -96,7 +96,8 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
 	fsl-ls1043a-qds-lpuart.dtb \
 	fsl-ls1043a-rdb.dtb \
 	fsl-ls1012a-qds.dtb \
-	fsl-ls1012a-rdb.dtb
+	fsl-ls1012a-rdb.dtb \
+	fsl-ls1012a-frdm.dtb
 
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
diff --git a/arch/arm/dts/fsl-ls1012a-frdm.dts b/arch/arm/dts/fsl-ls1012a-frdm.dts
new file mode 100644
index 0000000..3a06c0a
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1012a-frdm.dts
@@ -0,0 +1,16 @@
+/*
+ * Device Tree file for Freescale Layerscape-1012A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a-frdm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &duart0;
+	};
+};
diff --git a/arch/arm/dts/fsl-ls1012a-frdm.dtsi b/arch/arm/dts/fsl-ls1012a-frdm.dtsi
new file mode 100644
index 0000000..9f0db91
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1012a-frdm.dtsi
@@ -0,0 +1,39 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1012A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/include/ "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A FREEDOM Board";
+	aliases {
+		spi0 = &qspi;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fl128s@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig
new file mode 100644
index 0000000..a34521c
--- /dev/null
+++ b/board/freescale/ls1012afrdm/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_LS1012AFRDM
+
+config SYS_BOARD
+	default "ls1012afrdm"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1012afrdm"
+
+endif
diff --git a/board/freescale/ls1012afrdm/MAINTAINERS b/board/freescale/ls1012afrdm/MAINTAINERS
new file mode 100644
index 0000000..2f31d0f
--- /dev/null
+++ b/board/freescale/ls1012afrdm/MAINTAINERS
@@ -0,0 +1,6 @@
+LS1012AFRDM BOARD
+M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+S:	Maintained
+F:	board/freescale/ls1012afrdm/
+F:	include/configs/ls1012afrdm.h
+F:	configs/ls1012afrdm_defconfig
diff --git a/board/freescale/ls1012afrdm/Makefile b/board/freescale/ls1012afrdm/Makefile
new file mode 100644
index 0000000..dbfa2ce
--- /dev/null
+++ b/board/freescale/ls1012afrdm/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += ls1012afrdm.o
diff --git a/board/freescale/ls1012afrdm/README b/board/freescale/ls1012afrdm/README
new file mode 100644
index 0000000..0aadbb1
--- /dev/null
+++ b/board/freescale/ls1012afrdm/README
@@ -0,0 +1,94 @@
+Overview
+--------
+The LS1012AFRDM power supplies (PS) provide all the voltages necessary
+for the correct operation of the LS1012A processor, DDR3L, QSPI memory,
+and other onboard peripherals.
+
+LS1012A SoC Overview
+--------------------
+The LS1012A features an advanced 64-bit ARM v8 Cortex-
+A53 processor, with 32 KB of parity protected L1-I cache,
+32 KB of ECC protected L1-D cache, as well as 256 KB of
+ECC protected L2 cache.
+
+The LS1012A SoC includes the following function and features:
+ - One 64-bit ARM v8 Cortex-A53 core with the following capabilities:
+ - ARM v8 cryptography extensions
+ - One 16-bit DDR3L SDRAM memory controller, Up to 1.0 GT/s, Supports
+    16-/8-bit operation (no ECC support)
+ - ARM core-link CCI-400 cache coherent interconnect
+ - Packet Forwarding Engine (PFE)
+ - Cryptography acceleration (SEC)
+ - Ethernet interfaces supported by PFE:
+ - One Configurable x3 SerDes:
+    Two Serdes PLLs supported for usage by any SerDes data lane
+    Support for up to 6 GBaud operation
+ - High-speed peripheral interfaces:
+     - One PCI Express Gen2 controller, supporting x1 operation
+     - One serial ATA (SATA Gen 3.0) controller
+     - One USB 3.0/2.0 controller with integrated PHY
+     - One USB 2.0 controller with ULPI interface. .
+ - Additional peripheral interfaces:
+    - One quad serial peripheral interface (QuadSPI) controller
+    - One serial peripheral interface (SPI) controller
+    - Two enhanced secure digital host controllers
+    - Two I2C controllers
+    - One 16550 compliant DUART (two UART interfaces)
+    - Two general purpose IOs (GPIO)
+    - Two FlexTimers
+    - Five synchronous audio interfaces (SAI)
+    - Pre-boot loader (PBL) provides pre-boot initialization and RCW loading
+    - Single-source clocking solution enabling generation of core, platform,
+    DDR, SerDes, and USB clocks from a single external crystal and internal
+    crystaloscillator
+    - Thermal monitor unit (TMU) with +/- 3C accuracy
+    - Two WatchDog timers
+    - ARM generic timer
+ - QorIQ platform's trust architecture 2.1
+
+ LS1012AFRDM board Overview
+ -----------------------
+ - SERDES Connections, 2 lanes supportingspeeds upto 1 Gbit/s
+     - 2 SGMII 1G PHYs
+ - DDR Controller
+     - 4 Gb DDR3L SDRAM memory, running at data rates up to 1 GT/s
+	operating at 1.35 V
+ - QSPI
+     - Onboard 512 Mbit QSPI flash memory running at speed up
+      to 108/54 MHz
+ - One high-speed USB 2.0/3.0 port, one USB 2.0 port
+     - USB 2.0/3.0 port is configured as On-The-Go (OTG) with a
+       Micro-AB connector.
+     - USB 2.0 port is a debug port (CMSIS DAP) and is configured
+       as a Micro-AB device.
+ - I2C controller
+     - One I2C bus with connectivity to Arduino headers
+ - UART
+     - UART (Console): UART1 (Without flow control) for console
+ - ARM JTAG support
+     - ARM Cortex® 10-pin JTAG connector for LS1012A
+     - CMSIS DAP through K20 microcontroller
+ - SAI Audio interface
+     - One SAI port, SAI 2 with full duplex support
+ - Clocks
+     - 25 MHz crystal for LS1012A
+     - 8 MHz Crystal for K20
+     - 24 MHz for SC16IS740IPW SPI to Dual UART bridge
+ - Power Supplies
+     - 5 V input supply from USB
+     - 0.9 V, 1.35 V, and 1.8 V for VDD/Core, DDR, I/O, and
+       other board interfaces
+
+Booting Options
+---------------
+a) QSPI Flash 1
+
+QSPI flash map
+--------------
+Images		| Size	|QSPI Flash Address
+------------------------------------------
+RCW + PBI	| 1MB	| 0x4000_0000
+U-boot 		| 1MB	| 0x4010_0000
+U-boot Env 	| 1MB	| 0x4020_0000
+PPA FIT image	| 2MB	| 0x4050_0000
+Linux ITB	| ~53MB | 0x40A0_0000
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
new file mode 100644
index 0000000..6be8951
--- /dev/null
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ppa.h>
+#include <asm/arch/soc.h>
+#include <hwconfig.h>
+#include <ahci.h>
+#include <mmc.h>
+#include <scsi.h>
+#include <fsl_csu.h>
+#include <fsl_esdhc.h>
+#include <environment.h>
+#include <fsl_mmdc.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void set_wait_for_bits_clear(void *ptr, u32 value, u32 bits)
+{
+	int timeout = 1000;
+
+	out_be32(ptr, value);
+
+	while (in_be32(ptr) & bits) {
+		udelay(100);
+		timeout--;
+	}
+	if (timeout <= 0)
+		puts("Error: wait for clear timeout.\n");
+}
+
+int checkboard(void)
+{
+	puts("Board: LS1012AFRDM ");
+
+	return 0;
+}
+
+void mmdc_init(void)
+{
+	struct mmdc_p_regs *mmdc =
+		(struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
+
+	/* Set MMDC_MDSCR[CON_REQ] */
+	out_be32(&mmdc->mdscr, 0x00008000);
+
+	/* configure timing parms */
+	out_be32(&mmdc->mdotc,  0x12554000);
+	out_be32(&mmdc->mdcfg0, 0xbabf7954);
+	out_be32(&mmdc->mdcfg1, 0xff328f64);
+	out_be32(&mmdc->mdcfg2, 0x01ff00db);
+
+	/* other parms	*/
+	out_be32(&mmdc->mdmisc,    0x00000680);
+	out_be32(&mmdc->mpmur0,    0x00000800);
+	out_be32(&mmdc->mdrwd,     0x00002000);
+	out_be32(&mmdc->mpodtctrl, 0x0000022a);
+
+	/* out of reset delays */
+	out_be32(&mmdc->mdor,  0x00bf1023);
+
+	/* physical parms */
+	out_be32(&mmdc->mdctl, 0x04180000);
+	out_be32(&mmdc->mdasp, 0x0000007f);
+
+	/* Enable MMDC */
+	out_be32(&mmdc->mdctl, 0x84180000);
+
+	/* dram init sequence: update MRs */
+	out_be32(&mmdc->mdscr, 0x00088032);
+	out_be32(&mmdc->mdscr, 0x00008033);
+	out_be32(&mmdc->mdscr, 0x00048031);
+	out_be32(&mmdc->mdscr, 0x19308030);
+
+	/* dram init sequence: ZQCL */
+	out_be32(&mmdc->mdscr,	    0x04008040);
+	set_wait_for_bits_clear(&mmdc->mpzqhwctrl, 0xa1390003, 0x00010000);
+
+	/* Calibrations now: wr lvl */
+	out_be32(&mmdc->mdscr,   0x00848031);
+	out_be32(&mmdc->mdscr,   0x00008200);
+	set_wait_for_bits_clear(&mmdc->mpwlgcr, 0x00000001, 0x00000001);
+
+	mdelay(1);
+
+	out_be32(&mmdc->mdscr, 0x00048031);
+	out_be32(&mmdc->mdscr, 0x00008000);
+
+	mdelay(1);
+
+	/* Calibrations now: Read DQS gating calibration */
+	out_be32(&mmdc->mdscr,     0x04008050);
+	out_be32(&mmdc->mdscr,     0x00048033);
+	out_be32(&mmdc->mppdcmpr2, 0x00000001);
+	out_be32(&mmdc->mprddlctl, 0x40404040);
+	set_wait_for_bits_clear(&mmdc->mpdgctrl0, 0x10000000, 0x10000000);
+
+	out_be32(&mmdc->mdscr, 0x00008033);
+
+	/* Calibrations now: Read calibration */
+	out_be32(&mmdc->mdscr,       0x04008050);
+	out_be32(&mmdc->mdscr,       0x00048033);
+	out_be32(&mmdc->mppdcmpr2,   0x00000001);
+	set_wait_for_bits_clear(&mmdc->mprddlhwctl, 0x00000010, 0x00000010);
+
+	out_be32(&mmdc->mdscr, 0x00008033);
+
+	/* PD, SR */
+	out_be32(&mmdc->mdpdc, 0x00030035);
+	out_be32(&mmdc->mapsr, 0x00001067);
+
+	/* refresh scheme */
+	set_wait_for_bits_clear(&mmdc->mdref, 0x103e8000, 0x00000001);
+
+	/* disable CON_REQ */
+	out_be32(&mmdc->mdscr, 0x0);
+}
+
+int dram_init(void)
+{
+	mmdc_init();
+
+	gd->ram_size = 0x20000000;
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
+int board_early_init_f(void)
+{
+	fsl_lsch2_early_init_f();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+	/*
+	 * Set CCI-400 control override register to enable barrier
+	 * transaction
+	 */
+	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+	gd->env_addr = (ulong)&default_environment[0];
+#endif
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+	enable_layerscape_ns_access();
+#endif
+
+	return 0;
+}
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	u64 base[CONFIG_NR_DRAM_BANKS];
+	u64 size[CONFIG_NR_DRAM_BANKS];
+
+	/* fixup DT for the two DDR banks */
+	base[0] = gd->bd->bi_dram[0].start;
+	size[0] = gd->bd->bi_dram[0].size;
+	base[1] = gd->bd->bi_dram[1].start;
+	size[1] = gd->bd->bi_dram[1].size;
+
+	fdt_fixup_memory_banks(blob, base, size, 2);
+	ft_cpu_setup(blob, bd);
+
+	return 0;
+}
diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig
new file mode 100644
index 0000000..e27181c
--- /dev/null
+++ b/configs/ls1012afrdm_qspi_defconfig
@@ -0,0 +1,10 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AFRDM=y
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+# CONFIG_CMD_IMLS is not set
+CONFIG_SYS_NS16550=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frdm"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI=y
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
new file mode 100644
index 0000000..3231ab7
--- /dev/null
+++ b/include/configs/ls1012afrdm.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __LS1012ARDB_H__
+#define __LS1012ARDB_H__
+
+#include "ls1012a_common.h"
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	1
+#define CONFIG_NR_DRAM_BANKS		2
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_REALTEK
+/*
+* USB
+*/
+#define CONFIG_HAS_FSL_XHCI_USB
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_G_DNL_MANUFACTURER "NXP Semiconductor"
+#define CONFIG_G_DNL_VENDOR_NUM 0x1234
+#define CONFIG_G_DNL_PRODUCT_NUM 0x1234
+#define CONFIG_USB_GADGET_DUALSPEED
+
+/* USB Gadget ums command */
+#define CONFIG_CMD_USB_MASS_STORAGE
+#endif
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		0x9fffffff
+
+#endif /* __LS1012ARDB_H__ */
-- 
1.7.9.5