path: root/package/boot/uboot-lantiq/patches/0013-net-switchlib-add-driver-for-REALTEK-RTL8306.patch

From 42cb399df978a33539b95d668b3f973d927cb902 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Mon, 17 Dec 2012 23:37:57 +0100
Subject: net: switchlib: add driver for REALTEK RTL8306

Signed-off-by: Oliver Muth <dr.o.muth@gmx.de>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

--- a/drivers/net/switch/Makefile
+++ b/drivers/net/switch/Makefile
@@ -13,6 +13,7 @@ COBJS-$(CONFIG_SWITCH_MULTI) += switch.o
 COBJS-$(CONFIG_SWITCH_PSB697X) += psb697x.o
 COBJS-$(CONFIG_SWITCH_ADM6996I) += adm6996i.o
 COBJS-$(CONFIG_SWITCH_AR8216) += ar8216.o
+COBJS-$(CONFIG_SWITCH_RTL8306) += rtl8306.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
--- /dev/null
+++ b/drivers/net/switch/rtl8306.c
@@ -0,0 +1,332 @@
+/*
+ * Based on OpenWRT linux driver
+ *
+ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#define DEBUG
+#include <common.h>
+#include <malloc.h>
+#include <switch.h>
+#include <miiphy.h>
+
+#define RTL8306_REG_PAGE		16
+#define RTL8306_REG_PAGE_LO		(1 << 15)
+#define RTL8306_REG_PAGE_HI		(1 << 1) /* inverted */
+#define RTL8306_CHIPID			0x5988
+
+#define RTL8306_NUM_VLANS		16
+#define RTL8306_NUM_PORTS		6
+#define RTL8306_PORT_CPU		5
+#define RTL8306_NUM_PAGES		4
+#define RTL8306_NUM_REGS		32
+
+enum {
+	RTL_TYPE_S,
+	RTL_TYPE_SD,
+	RTL_TYPE_SDM,
+};
+
+struct rtl_reg {
+	int page;
+	int phy;
+	int reg;
+	int bits;
+	int shift;
+	int inverted;
+};
+
+enum rtl_regidx {
+	RTL_REG_CHIPID,
+	RTL_REG_CHIPVER,
+	RTL_REG_CHIPTYPE,
+	RTL_REG_CPUPORT,
+
+	RTL_REG_EN_CPUPORT,
+	RTL_REG_EN_TAG_OUT,
+	RTL_REG_EN_TAG_CLR,
+	RTL_REG_EN_TAG_IN,
+	RTL_REG_TRAP_CPU,
+	RTL_REG_TRUNK_PORTSEL,
+	RTL_REG_EN_TRUNK,
+	RTL_REG_RESET,
+	RTL_REG_PHY_RESET,
+	RTL_REG_CPU_LINKUP,
+
+	RTL_REG_VLAN_ENABLE,
+	RTL_REG_VLAN_FILTER,
+	RTL_REG_VLAN_TAG_ONLY,
+	RTL_REG_VLAN_TAG_AWARE,
+#define RTL_VLAN_ENUM(id) \
+	RTL_REG_VLAN##id##_VID, \
+	RTL_REG_VLAN##id##_PORTMASK
+	RTL_VLAN_ENUM(0),
+	RTL_VLAN_ENUM(1),
+	RTL_VLAN_ENUM(2),
+	RTL_VLAN_ENUM(3),
+	RTL_VLAN_ENUM(4),
+	RTL_VLAN_ENUM(5),
+	RTL_VLAN_ENUM(6),
+	RTL_VLAN_ENUM(7),
+	RTL_VLAN_ENUM(8),
+	RTL_VLAN_ENUM(9),
+	RTL_VLAN_ENUM(10),
+	RTL_VLAN_ENUM(11),
+	RTL_VLAN_ENUM(12),
+	RTL_VLAN_ENUM(13),
+	RTL_VLAN_ENUM(14),
+	RTL_VLAN_ENUM(15),
+#define RTL_PORT_ENUM(id) \
+	RTL_REG_PORT##id##_PVID, \
+	RTL_REG_PORT##id##_NULL_VID_REPLACE, \
+	RTL_REG_PORT##id##_NON_PVID_DISCARD, \
+	RTL_REG_PORT##id##_VID_INSERT, \
+	RTL_REG_PORT##id##_TAG_INSERT, \
+	RTL_REG_PORT##id##_LINK, \
+	RTL_REG_PORT##id##_SPEED, \
+	RTL_REG_PORT##id##_NWAY, \
+	RTL_REG_PORT##id##_NRESTART, \
+	RTL_REG_PORT##id##_DUPLEX, \
+	RTL_REG_PORT##id##_RXEN, \
+	RTL_REG_PORT##id##_TXEN, \
+	RTL_REG_PORT##id##_LRNEN
+	RTL_PORT_ENUM(0),
+	RTL_PORT_ENUM(1),
+	RTL_PORT_ENUM(2),
+	RTL_PORT_ENUM(3),
+	RTL_PORT_ENUM(4),
+	RTL_PORT_ENUM(5),
+};
+
+static const struct rtl_reg rtl_regs[] = {
+	[RTL_REG_CHIPID]         = { 0, 4, 30, 16,  0, 0 },
+	[RTL_REG_CHIPVER]        = { 0, 4, 31,  8,  0, 0 },
+	[RTL_REG_CHIPTYPE]       = { 0, 4, 31,  2,  8, 0 },
+
+	/* CPU port number */
+	[RTL_REG_CPUPORT]        = { 2, 4, 21,  3,  0, 0 },
+	/* Enable CPU port function */
+	[RTL_REG_EN_CPUPORT]     = { 3, 2, 21,  1, 15, 1 },
+	/* Enable CPU port tag insertion */
+	[RTL_REG_EN_TAG_OUT]     = { 3, 2, 21,  1, 12, 0 },
+	/* Enable CPU port tag removal */
+	[RTL_REG_EN_TAG_CLR]     = { 3, 2, 21,  1, 11, 0 },
+	/* Enable CPU port tag checking */
+	[RTL_REG_EN_TAG_IN]      = { 0, 4, 21,  1,  7, 0 },
+	[RTL_REG_EN_TRUNK]       = { 0, 0, 19,  1, 11, 1 },
+	[RTL_REG_TRUNK_PORTSEL]  = { 0, 0, 16,  1,  6, 1 },
+	[RTL_REG_RESET]          = { 0, 0, 16,  1, 12, 0 },
+	[RTL_REG_PHY_RESET]	 = { 0, 0,  0,  1, 15, 0 },
+	[RTL_REG_CPU_LINKUP]	 = { 0, 6, 22,  1, 15, 0 },
+	[RTL_REG_TRAP_CPU]       = { 3, 2, 22,  1,  6, 0 },
+
+	[RTL_REG_VLAN_TAG_ONLY]  = { 0, 0, 16,  1,  8, 1 },
+	[RTL_REG_VLAN_FILTER]    = { 0, 0, 16,  1,  9, 1 },
+	[RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16,  1, 10, 1 },
+	[RTL_REG_VLAN_ENABLE]    = { 0, 0, 18,  1,  8, 1 },
+
+#define RTL_VLAN_REGS(id, phy, page, regofs) \
+	[RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \
+	[RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 }
+	RTL_VLAN_REGS( 0, 0, 0, 0),
+	RTL_VLAN_REGS( 1, 1, 0, 0),
+	RTL_VLAN_REGS( 2, 2, 0, 0),
+	RTL_VLAN_REGS( 3, 3, 0, 0),
+	RTL_VLAN_REGS( 4, 4, 0, 0),
+	RTL_VLAN_REGS( 5, 0, 1, 2),
+	RTL_VLAN_REGS( 6, 1, 1, 2),
+	RTL_VLAN_REGS( 7, 2, 1, 2),
+	RTL_VLAN_REGS( 8, 3, 1, 2),
+	RTL_VLAN_REGS( 9, 4, 1, 2),
+	RTL_VLAN_REGS(10, 0, 1, 4),
+	RTL_VLAN_REGS(11, 1, 1, 4),
+	RTL_VLAN_REGS(12, 2, 1, 4),
+	RTL_VLAN_REGS(13, 3, 1, 4),
+	RTL_VLAN_REGS(14, 4, 1, 4),
+	RTL_VLAN_REGS(15, 0, 1, 6),
+
+#define REG_PORT_SETTING(port, phy) \
+	[RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \
+	[RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \
+	[RTL_REG_PORT##port##_NRESTART] = { 0, phy, 0, 1, 9, 0 }, \
+	[RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \
+	[RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \
+	[RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \
+	[RTL_REG_PORT##port##_LRNEN] = { 0, phy, 24, 1, 9, 0 }, \
+	[RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \
+	[RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \
+	[RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \
+	[RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \
+	[RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 }
+
+	REG_PORT_SETTING(0, 0),
+	REG_PORT_SETTING(1, 1),
+	REG_PORT_SETTING(2, 2),
+	REG_PORT_SETTING(3, 3),
+	REG_PORT_SETTING(4, 4),
+	REG_PORT_SETTING(5, 6),
+
+#define REG_PORT_PVID(phy, page, regofs) \
+	{ page, phy, 24 + regofs, 4, 12, 0 }
+	[RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0),
+	[RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0),
+	[RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0),
+	[RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0),
+	[RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0),
+	[RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2),
+};
+
+static void rtl_set_page(struct mii_dev *bus, unsigned int page)
+{
+	u16 pgsel;
+
+	BUG_ON(page > RTL8306_NUM_PAGES);
+
+	pgsel = bus->read(bus, 0, MDIO_DEVAD_NONE, RTL8306_REG_PAGE);
+	pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI);
+
+	if (page & (1 << 0))
+		pgsel |= RTL8306_REG_PAGE_LO;
+
+	if (!(page & (1 << 1))) /* bit is inverted */
+		pgsel |= RTL8306_REG_PAGE_HI;
+
+	bus->write(bus, 0, MDIO_DEVAD_NONE, RTL8306_REG_PAGE, pgsel);
+
+}
+
+static __maybe_unused int rtl_w16(struct mii_dev *bus, unsigned int page, unsigned int phy,
+			unsigned int reg, u16 val)
+{
+	rtl_set_page(bus, page);
+
+	bus->write(bus, phy, MDIO_DEVAD_NONE, reg, val);
+	bus->read(bus, phy, MDIO_DEVAD_NONE, reg); /* flush */
+
+	return 0;
+}
+
+static int rtl_r16(struct mii_dev *bus, unsigned int page, unsigned int phy,
+			unsigned int reg)
+{
+	rtl_set_page(bus, page);
+
+	return bus->read(bus, phy, MDIO_DEVAD_NONE, reg);
+}
+
+static u16 rtl_rmw(struct mii_dev *bus, unsigned int page, unsigned int phy,
+			unsigned int reg, u16 mask, u16 val)
+{
+	u16 r;
+
+	rtl_set_page(bus, page);
+
+	r = bus->read(bus, phy, MDIO_DEVAD_NONE, reg);
+	r &= ~mask;
+	r |= val;
+	bus->write(bus, phy, MDIO_DEVAD_NONE, reg, r);
+
+	return bus->read(bus, phy, MDIO_DEVAD_NONE, reg); /* flush */
+}
+
+static int rtl_get(struct mii_dev *bus, enum rtl_regidx s)
+{
+	const struct rtl_reg *r = &rtl_regs[s];
+	u16 val;
+
+	BUG_ON(s >= ARRAY_SIZE(rtl_regs));
+
+	if (r->bits == 0) /* unimplemented */
+		return 0;
+
+	val = rtl_r16(bus, r->page, r->phy, r->reg);
+
+	if (r->shift > 0)
+		val >>= r->shift;
+
+	if (r->inverted)
+		val = ~val;
+
+	val &= (1 << r->bits) - 1;
+
+	return val;
+}
+
+static __maybe_unused int rtl_set(struct mii_dev *bus, enum rtl_regidx s, unsigned int val)
+{
+	const struct rtl_reg *r = &rtl_regs[s];
+	u16 mask = 0xffff;
+
+	BUG_ON(s >= ARRAY_SIZE(rtl_regs));
+
+	if (r->bits == 0) /* unimplemented */
+		return 0;
+
+	if (r->shift > 0)
+		val <<= r->shift;
+
+	if (r->inverted)
+		val = ~val;
+
+	if (r->bits != 16) {
+		mask = (1 << r->bits) - 1;
+		mask <<= r->shift;
+	}
+
+	val &= mask;
+
+	return rtl_rmw(bus, r->page, r->phy, r->reg, mask, val);
+}
+
+static int rtl8306_probe(struct switch_device *dev)
+{
+	struct mii_dev *bus = dev->bus;
+	unsigned int chipid, chipver, chiptype;
+
+	chipid = rtl_get(bus, RTL_REG_CHIPID);
+	chipver = rtl_get(bus, RTL_REG_CHIPVER);
+	chiptype = rtl_get(bus, RTL_REG_CHIPTYPE);
+
+	debug("%s: chipid %x, chipver %x, chiptype %x\n",
+		__func__, chipid, chipver, chiptype);
+
+	if (chipid == RTL8306_CHIPID)
+		return 0;
+
+	return 1;
+}
+
+static void rtl8306_setup(struct switch_device *dev)
+{
+	struct mii_dev *bus = dev->bus;
+
+	/* initialize cpu port settings */
+	rtl_set(bus, RTL_REG_CPUPORT, dev->cpu_port);
+	rtl_set(bus, RTL_REG_EN_CPUPORT, 1);
+
+	/* enable phy 5 link status */
+	rtl_set(bus, RTL_REG_CPU_LINKUP, 1);
+//	rtl_set(bus, RTL_REG_PORT5_TXEN, 1);
+//	rtl_set(bus, RTL_REG_PORT5_RXEN, 1);
+//	rtl_set(bus, RTL_REG_PORT5_LRNEN, 1);
+#ifdef DEBUG
+ debug("%s: CPU link up: %i\n",
+		__func__, rtl_get(bus, RTL_REG_PORT5_LINK));
+#endif
+
+}
+
+static struct switch_driver rtl8306_drv = {
+	.name = "rtl8306",
+};
+
+void switch_rtl8306_init(void)
+{
+	/* For archs with manual relocation */
+	rtl8306_drv.probe = rtl8306_probe;
+	rtl8306_drv.setup = rtl8306_setup;
+
+	switch_driver_register(&rtl8306_drv);
+}
--- a/drivers/net/switch/switch.c
+++ b/drivers/net/switch/switch.c
@@ -26,6 +26,9 @@ void switch_init(void)
 #if defined(CONFIG_SWITCH_AR8216)
 	switch_ar8216_init();
 #endif
+#if defined(CONFIG_SWITCH_RTL8306)
+	switch_rtl8306_init();
+#endif
 
 	board_switch_init();
 }
--- a/include/switch.h
+++ b/include/switch.h
@@ -100,6 +100,7 @@ static inline void switch_setup(struct s
 extern void switch_psb697x_init(void);
 extern void switch_adm6996i_init(void);
 extern void switch_ar8216_init(void);
+extern void switch_rtl8306_init(void);
 
 #endif /* __SWITCH_H */