aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/image
diff options
context:
space:
mode:
authorRussell Morris <rmorris@rkmorris.us>2019-12-24 18:38:36 -0600
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-09-03 14:15:30 +0200
commit45a81f70568fc8068866f37147e8b55f131f56cc (patch)
treee615e915f032c5d08cf733a1874b27ea462e2756 /target/linux/ramips/image
parentb7013e9c4ad3b6944ac5a028d8ae9350be0859f0 (diff)
downloadupstream-45a81f70568fc8068866f37147e8b55f131f56cc.tar.gz
upstream-45a81f70568fc8068866f37147e8b55f131f56cc.tar.bz2
upstream-45a81f70568fc8068866f37147e8b55f131f56cc.zip
ramips: add support for HooToo HT-TM05
The HooToo HT-TM05 is a battery powered router, with an Ethernet and USB port. Vendor U-Boot limited to 1.5 MB kernel size, so use lzma loader (loader-okli). Specifications: SOC: MediaTek MT7620N BATTERY: 10400mAh WLAN: 802.11bgn LAN: 1x 10/100 Mbps Ethernet USB: 1x USB 2.0 (Type-A) RAM: 64 MB FLASH: GigaDevice GD25Q64, Serial 8 MB Flash, clocked at 50 MHz Flash itself specified to 80 MHz, but speed limited by mt7620 SPI fast-read enabled (m25p) LED: Status LED (blue after boot, green with WiFi traffic 4 leds to indicate power level of the battery (unable to control) INPUT: Power, reset button MAC assignment based on vendor firmware: 2.4 GHz *:b4 (factory 0x04) LAN/label *:b4 (factory 0x28) WAN *:b5 (factory 0x2e) Tested and working: - Ethernet - 2.4 GHz WiFi (Correct MAC-address) - Installation from TFTP (recovery) - OpenWRT sysupgrade (Preserving and non-preserving), through the usual ways: command line and LuCI - LEDs (except as noted above) - Button (reset) - I2C, which is needed for reading battery charge status and level - U-Boot environment / variables (from U-Boot, and OpenWrt) Installation: - Download the needed OpenWrt install files, place them in the root of a clean TFTP server running on your computer. Rename the files as, - ramips-mt7620-hootoo_tm05-squashfs-kernel.bin => kernel - ramips-mt7620-hootoo_tm05-squashfs-rootfs.bin => rootfs - Plug the router into your computer via Ethernet - Set your computer to use 10.10.10.254 as its IP address - With your router shut down, hold down the power button until the first white LED lights up. - Push and hold the reset button and release the power button. Continue holding the reset button for 30 seconds or until it begins searching for files on your TFTP server, whichever comes first. - The router (10.10.10.128) will look for your computer at 10.10.10.254 and install the two files. Once it has finished installation, it will automatically reboot and start up OpenWrt. - Set your computer to use DHCP for its IP address Notes: - U-Boot environment can be modified, u-boot-env is preserved on initial install or sysupgrade - mtd-concat functionality is included, to leave a "hole" for u-boot-env, combining the OEM kernel and rootfs partitions I would like to thank @mpratt14 and @xabolcs for their help getting the lzma loader to work! Signed-off-by: Russell Morris <rmorris@rkmorris.us> [drop changes in image/Makefile, fix indent and P
#
# Copyright (C) 2007-2015 OpenWrt.org
# Copyright (C) 2010 Vertical Communications
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#

include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
include $(INCLUDE_DIR)/version.mk

PKG_NAME:=base-files
PKG_RELEASE:=164

PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
PKG_BUILD_DEPENDS:=usign/host
PKG_LICENSE:=GPL-2.0

PKG_CONFIG_DEPENDS := CONFIG_SIGNED_PACKAGES

include $(INCLUDE_DIR)/package.mk

ifneq ($(DUMP),1)
  TARGET:=-$(BOARD)
  ifneq ($(wildcard $(PLATFORM_DIR)/base-files-$(PROFILE) $(PLATFORM_SUBDIR)/base-files-$(PROFILE)),)
    TARGET:=$(TARGET)-$(PROFILE)
  endif
endif

define Package/base-files
  SECTION:=base
  CATEGORY:=Base system
  DEPENDS:=+netifd +libc +procd +jsonfilter +SIGNED_PACKAGES:usign +fstools
  TITLE:=Base filesystem for OpenWrt
  URL:=http://openwrt.org/
  VERSION:=$(PKG_RELEASE)-$(REVISION)
endef

define Package/base-files/conffiles
/etc/config/network
/etc/config/system
/etc/hosts
/etc/inittab
/etc/group
/etc/passwd
/etc/shadow
/etc/profile
/etc/protocols
/etc/services
/etc/shells
/etc/sysctl.conf
/etc/rc.local
/etc/sysupgrade.conf
/etc/config/
/etc/dropbear/
/etc/crontabs/
/etc/sysctl.d/local.conf
/etc/sysctl.d/
/etc/iproute2/rt_tables
$(call $(TARGET)/conffiles)
endef

define Package/base-files/description
 This package contains a base filesystem and system scripts for OpenWrt.
endef

ifneq ($(CONFIG_PREINITOPT),)
define ImageConfigOptions
	mkdir -p $(1)/lib/preinit
	echo 'pi_suppress_stderr="$(CONFIG_TARGET_PREINIT_SUPPRESS_STDERR)"' >$(1)/lib/preinit/00_preinit.conf
	echo 'fs_failsafe_wait_timeout=$(if $(CONFIG_TARGET_PREINIT_TIMEOUT),$(CONFIG_TARGET_PREINIT_TIMEOUT),2)' >>$(1)/lib/preinit/00_preinit.conf
	echo 'pi_init_path=$(if $(CONFIG_TARGET_INIT_PATH),$(CONFIG_TARGET_INIT_PATH),"/usr/sbin:/usr/bin:/sbin:/bin")' >>$(1)/lib/preinit/00_preinit.conf
	echo 'pi_init_env=$(if $(CONFIG_TARGET_INIT_ENV),$(CONFIG_TARGET_INIT_ENV),"")' >>$(1)/lib/preinit/00_preinit.conf
	echo 'pi_init_cmd=$(if $(CONFIG_TARGET_INIT_CMD),$(CONFIG_TARGET_INIT_CMD),"/sbin/init")' >>$(1)/lib/preinit/00_preinit.conf
	echo 'pi_init_suppress_stderr="$(CONFIG_TARGET_INIT_SUPPRESS_STDERR)"' >>$(1)/lib/preinit/00_preinit.conf
	echo 'pi_ifname=$(if $(CONFIG_TARGET_PREINIT_IFNAME),$(CONFIG_TARGET_PREINIT_IFNAME),"")' >>$(1)/lib/preinit/00_preinit.conf
	echo 'pi_ip=$(if $(CONFIG_TARGET_PREINIT_IP),$(CONFIG_TARGET_PREINIT_IP),"192.168.1.1")' >>$(1)/lib/preinit/00_preinit.conf
	echo 'pi_netmask=$(if $(CONFIG_TARGET_PREINIT_NETMASK),$(CONFIG_TARGET_PREINIT_NETMASK),"255.255.255.0")' >>$(1)/lib/preinit/00_preinit.conf
	echo 'pi_broadcast=$(if $(CONFIG_TARGET_PREINIT_BROADCAST),$(CONFIG_TARGET_PREINIT_BROADCAST),"192.168.1.255")' >>$(1)/lib/preinit/00_preinit.conf
	echo 'pi_preinit_net_messages="$(CONFIG_TARGET_PREINIT_SHOW_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
	echo 'pi_preinit_no_failsafe_netmsg="$(CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
endef
endif

define Build/Prepare
	mkdir -p $(PKG_BUILD_DIR)
endef

define Build/Compile/Default

endef
Build/Compile = $(Build/Compile/Default)

ifdef CONFIG_SIGNED_PACKAGES
  define Build/Configure
	[ -s $(BUILD_KEY) -a -s $(BUILD_KEY).pub ] || \
		$(STAGING_DIR_HOST)/bin/usign -G -s $(BUILD_KEY) -p $(BUILD_KEY).pub -c "Local build key"

  endef

  define Package/base-files/install-key
	mkdir -p $(1)/etc/opkg/keys
	$(CP) $(BUILD_KEY).pub $(1)/etc/opkg/keys/`$(STAGING_DIR_HOST)/bin/usign -F -p $(BUILD_KEY).pub`

  endef
endif

define Package/base-files/install
	$(CP) ./files/* $(1)/
	$(Package/base-files/install-key)
	if [ -d $(GENERIC_PLATFORM_DIR)/base-files/. ]; then \
		$(CP) $(GENERIC_PLATFORM_DIR)/base-files/* $(1)/; \
	fi
	if [ -d $(PLATFORM_DIR)/base-files/. ]; then \
		$(CP) $(PLATFORM_DIR)/base-files/* $(1)/; \
	fi
	if [ -d $(PLATFORM_DIR)/base-files-$(PROFILE)/. ]; then \
		$(CP) $(PLATFORM_DIR)/base-files-$(PROFILE)/* $(1)/; \
	fi
	if [ -d $(PLATFORM_DIR)/$(PROFILE)/base-files/. ]; then \
		$(CP) $(PLATFORM_DIR)/$(PROFILE)/base-files/* $(1)/; \
	fi
	$(if $(filter-out $(PLATFORM_DIR),$(PLATFORM_SUBDIR)), \
		if [ -d $(PLATFORM_SUBDIR)/base-files/. ]; then \
			$(CP) $(PLATFORM_SUBDIR)/base-files/* $(1)/; \
		fi; \
		if [ -d $(PLATFORM_SUBDIR)/base-files-$(PROFILE)/. ]; then \
			$(CP) $(PLATFORM_SUBDIR)/base-files-$(PROFILE)/* $(1)/; \
		fi; \
		if [ -d $(PLATFORM_SUBDIR)/$(PROFILE)/base-files/. ]; then \
			$(CP) $(PLATFORM_SUBDIR)/$(PROFILE)/base-files/* $(1)/; \
		fi \
	)

	$(VERSION_SED) \
		$(1)/etc/banner \
		$(1)/etc/openwrt_version

	$(VERSION_SED_SCRIPT) \
		$(1)/etc/openwrt_release \
		$(1)/etc/device_info

	mkdir -p $(1)/CONTROL
	mkdir -p $(1)/dev
	mkdir -p $(1)/etc/crontabs
	mkdir -p $(1)/etc/rc.d
	mkdir -p $(1)/overlay
	mkdir -p $(1)/lib/firmware
	$(if $(LIB_SUFFIX),-$(LN) lib $(1)/lib$(LIB_SUFFIX))
	mkdir -p $(1)/mnt
	mkdir -p $(1)/proc
	mkdir -p $(1)/tmp
	mkdir -p $(1)/usr/lib
	$(if $(LIB_SUFFIX),-$(LN) lib $(1)/usr/lib$(LIB_SUFFIX))
	mkdir -p $(1)/usr/bin
	mkdir -p $(1)/sys
	mkdir -p $(1)/www
	mkdir -p $(1)/root
	$(LN) /proc/mounts $(1)/etc/mtab
	rm -f $(1)/var
	$(LN) /tmp $(1)/var
	mkdir -p $(1)/etc
	$(LN) /tmp/resolv.conf /tmp/fstab /tmp/TZ $(1)/etc/

	chmod 0600 $(1)/etc/shadow
	chmod 1777 $(1)/tmp

	$(call ImageConfigOptions,$(1))
	$(call Package/base-files/install-target,$(1))
	for conffile in $(1)/etc/config/*; do \
		if [ -f "$$$$conffile" ]; then \
			grep "$$$${conffile##$(1)}" $(1)/CONTROL/conffiles || \
				echo "$$$${conffile##$(1)}" >> $(1)/CONTROL/conffiles; \
		fi \
	done
endef

ifneq ($(DUMP),1)
  -include $(PLATFORM_DIR)/base-files.mk
endif

$(eval $(call BuildPackage,base-files))
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-06 09:14:44 +0000