From 004589ff9df5b75672a78b6c3c4cba93202b14c9 Mon Sep 17 00:00:00 2001 From: Tianling Shen Date: Sat, 25 Mar 2023 15:40:20 +0800 Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R2C The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC chip changed from rtl8211e to yt8521s, and otherwise identical to R2S. Signed-off-by: Tianling Shen Link: https://lore.kernel.org/r/20230325074022.9818-3-cnsztl@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3328-nanopi-r2c.dts | 40 +++++++++++++++++++ 2 files changed, 41 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a9 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2021-2023 Tianling Shen + */ + +/dts-v1/; +#include "rk3328-nanopi-r2s.dts" + +/ { + model = "FriendlyElec NanoPi R2C"; + compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328"; +}; + +&gmac2io { + phy-handle = <&yt8521s>; + tx_delay = <0x22>; + rx_delay = <0x12>; + + mdio { + /delete-node/ ethernet-phy@1; + + yt8521s: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +};