From ee0175b3b44288c74d5292c2a9c2c154f6c0317e Mon Sep 17 00:00:00 2001 From: Sander Vanheule Date: Sun, 7 Aug 2022 21:21:15 +0200 Subject: [PATCH] gpio: realtek-otto: switch to 32-bit I/O By using 16-bit I/O on the GPIO peripheral, which is apparently not safe on MIPS, the IMR can end up containing garbage. This then results in interrupt triggers for lines that don't have an interrupt handler associated. The irq_desc lookup fails, and the ISR will not be cleared, keeping the CPU busy until reboot, or until another IMR operation restores the correct value. This situation appears to happen very rarely, for < 0.5% of IMR writes. Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory mapped peripheral registers, switch to using 32-bit I/O only, operating on the entire bank for all single bit line settings. For 2-bit line settings, with 16-bit port values, stick to manual (un)packing. This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48). Reported-by: Luiz Angelo Daros de Luca # DGS-1210-52 Reported-by: Birger Koblitz # GS728TP Reported-by: Jan Hoffmann # 1920-16G Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support") Signed-off-by: Sander Vanheule Cc: Paul Cercueil Reviewed-by: Linus Walleij Signed-off-by: Bartosz Golaszewski Update patch for missing upstream changes: - commit a01a40e33499 ("gpio: realtek-otto: Make the irqchip immutable") Signed-off-by: Sander Vanheule --- drivers/gpio/gpio-realtek-otto.c | 166 ++++++++++++++++--------------- 1 file changed, 85 insertions(+), 81 deletions(-) --- a/drivers/gpio/gpio-realtek-otto.c +++ b/drivers/gpio/gpio-realtek-otto.c @@ -46,10 +46,20 @@ * @lock: Lock for accessing the IRQ registers and values * @intr_mask: Mask for interrupts lines * @intr_type: Interrupt type selection + * @bank_read: Read a bank setting as a single 32-bit value + * @bank_write: Write a bank setting as a single 32-bit value + * @imr_line_pos: Bit shift of an IRQ line's IMR value. + * + * The DIR, DATA, and ISR registers consist of four 8-bit port values, packed + * into a single 32-bit register. Use @bank_read (@bank_write) to get (assign) + * a value from (to) these registers. The IMR register consists of four 16-bit + * port values, packed into two 32-bit registers. Use @imr_line_pos to get the + * bit shift of the 2-bit field for a line's IMR settings. Shifts larger than + * 32 overflow into the second register. * * Because the interrupt mask register (IMR) combines the function of IRQ type * selection and masking, two extra values are stored. @intr_mask is used to - * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store + * mask/unmask the interrupts for a GPIO line, and @intr_type is used to store * the selected interrupt types. The logical AND of these values is written to * IMR on changes. */ @@ -59,10 +69,11 @@ struct realtek_gpio_ctrl { void __iomem *cpumask_base; struct cpumask cpu_irq_maskable; raw_spinlock_t lock; - u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK]; - u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK]; - unsigned int (*port_offset_u8)(unsigned int port); - unsigned int (*port_offset_u16)(unsigned int port); + u8 intr_mask[REALTEK_GPIO_MAX]; + u8 intr_type[REALTEK_GPIO_MAX]; + u32 (*bank_read)(void __iomem *reg); + void (*bank_write)(void __iomem *reg, u32 value); + unsigned int (*line_imr_pos)(unsigned int line); }; /* Expand with more flags as devices with other quirks are added */ @@ -101,14 +112,22 @@ static struct realtek_gpio_ctrl *irq_dat * port. The two interrupt mask registers store two bits per GPIO, so use u16 * values. */ -static unsigned int realtek_gpio_port_offset_u8(unsigned int port) +static u32 realtek_gpio_bank_read_swapped(void __iomem *reg) +{ + return ioread32be(reg); +} + +static void realtek_gpio_bank_write_swapped(void __iomem *reg, u32 value) { - return port; + iowrite32be(value, reg); } -static unsigned int realtek_gpio_port_offset_u16(unsigned int port) +static unsigned int realtek_gpio_line_imr_pos_swapped(unsigned int line) { - return 2 * port; + unsigned int port_pin = line % 8; + unsigned int port = line / 8; + + return 2 * (8 * (port ^ 1) + port_pin); } /* @@ -119,64 +138,65 @@ static unsigned int realtek_gpio_port_of * per GPIO, so use u16 values. The first register contains ports 1 and 0, the * second ports 3 and 2. */ -static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port) +static u32 realtek_gpio_bank_read(void __iomem *reg) { - return 3 - port; + return ioread32(reg); } -static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port) +static void realtek_gpio_bank_write(void __iomem *reg, u32 value) { - return 2 * (port ^ 1); + iowrite32(value, reg); } -static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl, - unsigned int port, u16 irq_type, u16 irq_mask) +static unsigned int realtek_gpio_line_imr_pos(unsigned int line) { - iowrite16(irq_type & irq_mask, - ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port)); + return 2 * line; } -static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, - unsigned int port, u8 mask) +static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, u32 mask) { - iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port)); + ctrl->bank_write(ctrl->base + REALTEK_GPIO_REG_ISR, mask); } -static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port) +static u32 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl) { - return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port)); + return ctrl->bank_read(ctrl->base + REALTEK_GPIO_REG_ISR); } -/* Set the rising and falling edge mask bits for a GPIO port pin */ -static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value) +/* Set the rising and falling edge mask bits for a GPIO pin */ +static void realtek_gpio_update_line_imr(struct realtek_gpio_ctrl *ctrl, unsigned int line) { - return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin; + void __iomem *reg = ctrl->base + REALTEK_GPIO_REG_IMR; + unsigned int line_shift = ctrl->line_imr_pos(line); + unsigned int shift = line_shift % 32; + u32 irq_type = ctrl->intr_type[line]; + u32 irq_mask = ctrl->intr_mask[line]; + u32 reg_val; + + reg += 4 * (line_shift / 32); + reg_val = ioread32(reg); + reg_val &= ~(REALTEK_GPIO_IMR_LINE_MASK << shift); + reg_val |= (irq_type & irq_mask & REALTEK_GPIO_IMR_LINE_MASK) << shift; + iowrite32(reg_val, reg); } static void realtek_gpio_irq_ack(struct irq_data *data) { struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); irq_hw_number_t line = irqd_to_hwirq(data); - unsigned int port = line / 8; - unsigned int port_pin = line % 8; - realtek_gpio_clear_isr(ctrl, port, BIT(port_pin)); + realtek_gpio_clear_isr(ctrl, BIT(line)); } static void realtek_gpio_irq_unmask(struct irq_data *data) { struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); unsigned int line = irqd_to_hwirq(data); - unsigned int port = line / 8; - unsigned int port_pin = line % 8; unsigned long flags; - u16 m; raw_spin_lock_irqsave(&ctrl->lock, flags); - m = ctrl->intr_mask[port]; - m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK); - ctrl->intr_mask[port] = m; - realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m); + ctrl->intr_mask[line] = REALTEK_GPIO_IMR_LINE_MASK; + realtek_gpio_update_line_imr(ctrl, line); raw_spin_unlock_irqrestore(&ctrl->lock, flags); } @@ -184,16 +204,11 @@ static void realtek_gpio_irq_mask(struct { struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); unsigned int line = irqd_to_hwirq(data); - unsigned int port = line / 8; - unsigned int port_pin = line % 8; unsigned long flags; - u16 m; raw_spin_lock_irqsave(&ctrl->lock, flags); - m = ctrl->intr_mask[port]; - m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK); - ctrl->intr_mask[port] = m; - realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m); + ctrl->intr_mask[line] = 0; + realtek_gpio_update_line_imr(ctrl, line); raw_spin_unlock_irqrestore(&ctrl->lock, flags); } @@ -201,10 +216,8 @@ static int realtek_gpio_irq_set_type(str { struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); unsigned int line = irqd_to_hwirq(data); - unsigned int port = line / 8; - unsigned int port_pin = line % 8; unsigned long flags; - u16 type, t; + u8 type; switch (flow_type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_EDGE_FALLING: @@ -223,11 +236,8 @@ static int realtek_gpio_irq_set_type(str irq_set_handler_locked(data, handle_edge_irq); raw_spin_lock_irqsave(&ctrl->lock, flags); - t = ctrl->intr_type[port]; - t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK); - t |= realtek_gpio_imr_bits(port_pin, type); - ctrl->intr_type[port] = t; - realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]); + ctrl->intr_type[line] = type; + realtek_gpio_update_line_imr(ctrl, line); raw_spin_unlock_irqrestore(&ctrl->lock, flags); return 0; @@ -238,28 +248,21 @@ static void realtek_gpio_irq_handler(str struct gpio_chip *gc = irq_desc_get_handler_data(desc); struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc); struct irq_chip *irq_chip = irq_desc_get_chip(desc); - unsigned int lines_done; - unsigned int port_pin_count; unsigned long status; int offset; chained_irq_enter(irq_chip, desc); - for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) { - status = realtek_gpio_read_isr(ctrl, lines_done / 8); - port_pin_count = min(gc->ngpio - lines_done, 8U); - for_each_set_bit(offset, &status, port_pin_count) - generic_handle_domain_irq(gc->irq.domain, offset + lines_done); - } + status = realtek_gpio_read_isr(ctrl); + for_each_set_bit(offset, &status, gc->ngpio) + generic_handle_domain_irq(gc->irq.domain, offset); chained_irq_exit(irq_chip, desc); } -static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, - unsigned int port, int cpu) +static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, int cpu) { - return ctrl->cpumask_base + ctrl->port_offset_u8(port) + - REALTEK_GPIO_PORTS_PER_BANK * cpu; + return ctrl->cpumask_base + REALTEK_GPIO_PORTS_PER_BANK * cpu; } static int realtek_gpio_irq_set_affinity(struct irq_data *data, @@ -267,12 +270,10 @@ static int realtek_gpio_irq_set_affinity { struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); unsigned int line = irqd_to_hwirq(data); - unsigned int port = line / 8; - unsigned int port_pin = line % 8; void __iomem *irq_cpu_mask; unsigned long flags; int cpu; - u8 v; + u32 v; if (!ctrl->cpumask_base) return -ENXIO; @@ -280,15 +281,15 @@ static int realtek_gpio_irq_set_affinity raw_spin_lock_irqsave(&ctrl->lock, flags); for_each_cpu(cpu, &ctrl->cpu_irq_maskable) { - irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu); - v = ioread8(irq_cpu_mask); + irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu); + v = ctrl->bank_read(irq_cpu_mask); if (cpumask_test_cpu(cpu, dest)) - v |= BIT(port_pin); + v |= BIT(line); else - v &= ~BIT(port_pin); + v &= ~BIT(line); - iowrite8(v, irq_cpu_mask); + ctrl->bank_write(irq_cpu_mask, v); } raw_spin_unlock_irqrestore(&ctrl->lock, flags); @@ -302,22 +303,23 @@ static int realtek_gpio_irq_init(struct { struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc); void __iomem *irq_cpu_mask; - unsigned int port; + u32 mask_all = GENMASK(gc->ngpio - 1, 0); + unsigned int line; int cpu; - for (port = 0; (port * 8) < gc->ngpio; port++) { - realtek_gpio_write_imr(ctrl, port, 0, 0); - realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0)); - - /* - * Uniprocessor builds assume a mask always contains one CPU, - * so only start the loop if we have at least one maskable CPU. - */ - if(!cpumask_empty(&ctrl->cpu_irq_maskable)) { - for_each_cpu(cpu, &ctrl->cpu_irq_maskable) { - irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu); - iowrite8(GENMASK(7, 0), irq_cpu_mask); - } + for (line = 0; line < gc->ngpio; line++) + realtek_gpio_update_line_imr(ctrl, line); + + realtek_gpio_clear_isr(ctrl, mask_all); + + /* + * Uniprocessor builds assume a mask always contains one CPU, + * so only start the loop if we have at least one maskable CPU. + */ + if(!cpumask_empty(&ctrl->cpu_irq_maskable)) { + for_each_cpu(cpu, &ctrl->cpu_irq_maskable) { + irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu); + ctrl->bank_write(irq_cpu_mask, mask_all); } } @@ -390,12 +392,14 @@ static int realtek_gpio_probe(struct pla if (dev_flags & GPIO_PORTS_REVERSED) { bgpio_flags = 0; - ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev; - ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev; + ctrl->bank_read = realtek_gpio_bank_read; + ctrl->bank_write = realtek_gpio_bank_write; + ctrl->line_imr_pos = realtek_gpio_line_imr_pos; } else { bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER; - ctrl->port_offset_u8 = realtek_gpio_port_offset_u8; - ctrl->port_offset_u16 = realtek_gpio_port_offset_u16; + ctrl->bank_read = realtek_gpio_bank_read_swapped; + ctrl->bank_write = realtek_gpio_bank_write_swapped; + ctrl->line_imr_pos = realtek_gpio_line_imr_pos_swapped; } err = bgpio_init(&ctrl->gc, dev, 4,