--- a/drivers/gpio/gpio-realtek-otto.c
+++ b/drivers/gpio/gpio-realtek-otto.c
@@ -55,9 +55,12 @@
 struct realtek_gpio_ctrl {
 	struct gpio_chip gc;
 	void __iomem *base;
+	void __iomem *cpumap_base;
 	raw_spinlock_t lock;
 	u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
 	u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
+	unsigned int (*port_offset_u8)(unsigned int port);
+	unsigned int (*port_offset_u16)(unsigned int port);
 };
 
 /* Expand with more flags as devices with other quirks are added */
@@ -69,6 +72,16 @@ enum realtek_gpio_flags {
 	 * line the IRQ handler was assigned to, causing uncaught interrupts.
 	 */
 	GPIO_INTERRUPTS_DISABLED = BIT(0),
+	/*
+	 * Port order is reversed, meaning DCBA register layout for 1-bit
+	 * fields, and [BA, DC] for 2-bit fields.
+	 */
+	GPIO_PORTS_REVERSED = BIT(1),
+	/*
+	 * Interrupts can be enabled per cpu. This requires a secondary IO
+	 * range, where the per-cpu enable masks are located.
+	 */
+	GPIO_INTERRUPTS_PER_CPU = BIT(2),
 };
 
 static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
@@ -86,21 +99,50 @@ static struct realtek_gpio_ctrl *irq_dat
  * port. The two interrupt mask registers store two bits per GPIO, so use u16
  * values.
  */
+static unsigned int realtek_gpio_port_offset_u8(unsigned int port)
+{
+	return port;
+}
+
+static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
+{
+	return 2 * port;
+}
+
+/*
+ * Reversed port order register access
+ *
+ * For registers with one bit per GPIO, all ports are stored as u8-s in one
+ * register in reversed order. The two interrupt mask registers store two bits
+ * per GPIO, so use u16 values. The first register contains ports 1 and 0, the
+ * second ports 3 and 2.
+ */
+static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port)
+{
+	return 3 - port;
+}
+
+static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port)
+{
+	return 2 * (port ^ 1);
+}
+
 static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
 	unsigned int port, u16 irq_type, u16 irq_mask)
 {
-	iowrite16(irq_type & irq_mask, ctrl->base + REALTEK_GPIO_REG_IMR + 2 * port);
+	iowrite16(irq_type & irq_mask,
+		ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port));
 }
 
 static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
 	unsigned int port, u8 mask)
 {
-	iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + port);
+	iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
 }
 
 static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
 {
-	return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + port);
+	return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
 }
 
 /* Set the rising and falling edge mask bits for a GPIO port pin */
@@ -222,6 +264,12 @@ static int realtek_gpio_irq_init(struct
 	for (port = 0; (port * 8) < gc->ngpio; port++) {
 		realtek_gpio_write_imr(ctrl, port, 0, 0);
 		realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
+
+		if (ctrl->cpumap_base) {
+			/* Default CPU affinity to the first CPU */
+			iowrite8(GENMASK(7, 0),
+				ctrl->cpumap_base + ctrl->port_offset_u8(port));
+		}
 	}
 
 	return 0;
@@ -246,6 +294,13 @@ static const struct of_device_id realtek
 	{
 		.compatible = "realtek,rtl8390-gpio",
 	},
+	{
+		.compatible = "realtek,rtl9300-gpio",
+		.data = (void *)(GPIO_PORTS_REVERSED | GPIO_INTERRUPTS_PER_CPU)
+	},
+	{
+		.compatible = "realtek,rtl9310-gpio",
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, realtek_gpio_of_match);
@@ -253,12 +308,14 @@ MODULE_DEVICE_TABLE(of, realtek_gpio_of_
 static int realtek_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	unsigned long bgpio_flags;
 	unsigned int dev_flags;
 	struct gpio_irq_chip *girq;
 	struct realtek_gpio_ctrl *ctrl;
 	u32 ngpios;
 	int err, irq;
 
+	pr_info("%s probing RTL GPIO\n", __func__);
 	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
 	if (!ctrl)
 		return -ENOMEM;
@@ -280,10 +337,21 @@ static int realtek_gpio_probe(struct pla
 
 	raw_spin_lock_init(&ctrl->lock);
 
+	if (dev_flags & GPIO_PORTS_REVERSED) {
+		bgpio_flags = 0;
+		ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev;
+		ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev;
+	}
+	else {
+		bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
+		ctrl->port_offset_u8 = realtek_gpio_port_offset_u8;
+		ctrl->port_offset_u16 = realtek_gpio_port_offset_u16;
+	}
+
 	err = bgpio_init(&ctrl->gc, dev, 4,
 		ctrl->base + REALTEK_GPIO_REG_DATA, NULL, NULL,
 		ctrl->base + REALTEK_GPIO_REG_DIR, NULL,
-		BGPIOF_BIG_ENDIAN_BYTE_ORDER);
+		bgpio_flags);
 	if (err) {
 		dev_err(dev, "unable to init generic GPIO");
 		return err;
@@ -308,6 +376,13 @@ static int realtek_gpio_probe(struct pla
 		girq->init_hw = realtek_gpio_irq_init;
 	}
 
+	if (dev_flags & GPIO_INTERRUPTS_PER_CPU) {
+		ctrl->cpumap_base = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(ctrl->cpumap_base))
+			return dev_err_probe(dev, PTR_ERR(ctrl->cpumap_base),
+				"IRQ CPU map registers not defined");
+	}
+
 	return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
 }