// SPDX-License-Identifier: GPL-2.0-or-later

#include "rtl838x.dtsi"

#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>

/ {
	compatible = "netgear,gs110tpp-v1", "realtek,rtl838x-soc";
	model = "Netgear GS110TPP";

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x8000000>;
	};

	keys {
		compatible = "gpio-keys-polled";
		poll-interval = <20>;

		mode {
			label = "reset";
			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};
};

&gpio0 {
	indirect-access-bus-id = <0>;
};

&spi0 {
	status = "okay";
	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;
			partition@0 {
				label = "u-boot";
				reg = <0x0000000 0x0e0000>;
				read-only;
			};
			partition@e0000 {
				label = "u-boot-env";
				reg = <0x00e0000 0x010000>;
			};
			partition@f0000 {
				label = "sysinfo";
				reg = <0x00f0000 0x010000>;
				read-only;
			};
			partition@100000{
				label = "jffs2_cfg";
				reg = <0x0100000 0x100000>;
				read-only;
			};
			partition@200000{
				label = "jffs2_log";
				reg = <0x0200000 0x100000>;
			};
			partition@300000{
				label = "firmware";
				compatible = "openwrt,uimage", "denx,uimage";
				openwrt,ih-magic = <0x4e474520>;
				reg = <0x0300000 0x1d00000>;
			};
		};
	};
};

&ethernet0 {
	mdio: mdio-bus {
		compatible = "realtek,rtl838x-mdio";
		regmap = <&ethernet0>;
		#address-cells = <1>;
		#size-cells = <0>;

		/* Internal phy */
		phy8: ethernet-phy@8 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <8>;
		};
		phy9: ethernet-phy@9 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <9>;
		};
		phy10: ethernet-phy@10 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <10>;
		};
		phy11: ethernet-phy@11 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <11>;
		};
		phy12: ethernet-phy@12 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <12>;
		};
		phy13: ethernet-phy@13 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <13>;
		};
		phy14: ethernet-phy@14 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <14>;
		};
		phy15: ethernet-phy@15 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <15>;
		};
/*		phy10: ethernet-phy@10 {
			compatible = "ethernet-phy-ieee802.3-c22";
			phy-is-integrated;
			reg = <10>;
		};
		phy11: ethernet-phy@11 {
			compatible = "ethernet-phy-ieee802.3-c22";
			phy-is-integrated;
			reg = <11>;
		};
		phy12: ethernet-phy@12 {
			compatible = "ethernet-phy-ieee802.3-c22";
			phy-is-integrated;
			reg = <12>;
		};
		phy13: ethernet-phy@13 {
			compatible = "ethernet-phy-ieee802.3-c22";
			phy-is-integrated;
			reg = <13>;
		};*/
	};
};

&switch0 {
	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@8 {
			reg = <8>;
			label = "lan1";
			phy-handle = <&phy8>;
			phy-mode = "internal";
		};
		port@9 {
			reg = <9>;
			label = "lan2";
			phy-handle = <&phy9>;
			phy-mode = "internal";
		};
		port@10 {
			reg = <10>;
			label = "lan3";
			phy-handle = <&phy10>;
			phy-mode = "internal";
		};
		port@11 {
			reg = <11>;
			label = "lan4";
			phy-handle = <&phy11>;
			phy-mode = "internal";
		};
		port@12 {
			reg = <12>;
			label = "lan5";
			phy-handle = <&phy12>;
			phy-mode = "internal";
		};
		port@13 {
			reg = <13>;
			label = "lan6";
			phy-handle = <&phy13>;
			phy-mode = "internal";
		};
		port@14 {
			reg = <14>;
			label = "lan7";
			phy-handle = <&phy14>;
			phy-mode = "internal";
		};
		port@15 {
			reg = <15>;
			label = "lan8";
			phy-handle = <&phy15>;
			phy-mode = "internal";
		};
/*		port@10 {
			reg = <10>;
			label = "lan9";
			phy-mode = "internal";
			phy-handle = <&phy10>;
		};
		port@11 {
			reg = <11>;
			label = "lan10";
			phy-mode = "internal";
			phy-handle = <&phy11>;
		};
		port@12 {
			reg = <12>;
			label = "lan11";
			phy-mode = "internal";
			phy-handle = <&phy12>;
		};
		port@13 {
			reg = <13>;
			label = "lan12";
			phy-mode = "internal";
			phy-handle = <&phy13>;
		};*/
		port@28 {
			ethernet = <&ethernet0>;
			reg = <28>;
			phy-mode = "internal";
			fixed-link {
				speed = <1000>;
				full-duplex;
			};
		};
	};
};