From 89ec9bbe60b61cc6ae3eddd6d4f43e128f8a88de Mon Sep 17 00:00:00 2001 From: Shiji Yang Date: Tue, 20 Jun 2023 18:43:23 +0800 Subject: [PATCH 2/2] mips: pci-mt7620: use dev_info() to log PCIe device detection result Usually, We only need to print the error log when there is a PCIe card but initialization fails. Whether the driver finds the PCIe card or not is the expected behavior. So it's better to log these information with dev_info(). Tested on MT7628AN router Motorola MWR03. Signed-off-by: Shiji Yang Reviewed-by: Sergio Paracuellos Signed-off-by: Thomas Bogendoerfer --- arch/mips/pci/pci-mt7620.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/mips/pci/pci-mt7620.c +++ b/arch/mips/pci/pci-mt7620.c @@ -331,7 +331,7 @@ static int mt7620_pci_probe(struct platf rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); if (ralink_soc == MT762X_SOC_MT7620A) rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV); - dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n"); + dev_info(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n"); return -1; } @@ -374,7 +374,7 @@ int pcibios_map_irq(const struct pci_dev dev->bus->number, slot); return 0; } - dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", + dev_info(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", dev->bus->number, slot, irq); /* configure the cache line size to 0x14 */