From 6decd1aad15f56b169217789630a0098b496de0e Mon Sep 17 00:00:00 2001 From: Ilya Lipnitskiy Date: Wed, 7 Apr 2021 13:07:38 -0700 Subject: [PATCH] MIPS: add support for buggy MT7621S core detection Most MT7621 SoCs have 2 cores, which is detected and supported properly by CPS. Unfortunately, MT7621 SoC has a less common S variant with only one core. On MT7621S, GCR_CONFIG still reports 2 cores, which leads to hangs when starting SMP. CPULAUNCH registers can be used in that case to detect the absence of the second core and override the GCR_CONFIG PCORES field. Rework a long-standing OpenWrt patch to override the value of mips_cps_numcores on single-core MT7621 systems. Tested on a dual-core MT7621 device (Ubiquiti ER-X) and a single-core MT7621 device (Netgear R6220). Original 4.14 OpenWrt patch: Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=4cdbc90a376dd0555201c1434a2081e055e9ceb7 Current 5.10 OpenWrt patch: Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch;h=c63f0f4c1ec742e24d8480e80553863744b58f6a;hb=10267e17299806f9885d086147878f6c492cb904 Suggested-by: Felix Fietkau Signed-off-by: Ilya Lipnitskiy Signed-off-by: Thomas Bogendoerfer --- arch/mips/include/asm/mips-cps.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) --- a/arch/mips/include/asm/mips-cps.h +++ b/arch/mips/include/asm/mips-cps.h @@ -10,6 +10,8 @@ #include #include +#include + extern unsigned long __cps_access_bad_size(void) __compiletime_error("Bad size for CPS accessor"); @@ -165,11 +167,30 @@ static inline uint64_t mips_cps_cluster_ */ static inline unsigned int mips_cps_numcores(unsigned int cluster) { + unsigned int ncores; + if (!mips_cm_present()) return 0; /* Add one before masking to handle 0xff indicating no cores */ - return (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES; + ncores = (mips_cps_cluster_config(cluster) + 1) & CM_GCR_CONFIG_PCORES; + + if (IS_ENABLED(CONFIG_SOC_MT7621)) { + struct cpulaunch *launch; + + /* + * Ralink MT7621S SoC is single core, but the GCR_CONFIG method + * always reports 2 cores. Check the second core's LAUNCH_FREADY + * flag to detect if the second core is missing. This method + * only works before the core has been started. + */ + launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); + launch += 2; /* MT7621 has 2 VPEs per core */ + if (!(launch->flags & LAUNCH_FREADY)) + ncores = 1; + } + + return ncores; } /**