From 277c29fcf17b9e3ada6ddc3bda0f7780bb8a222a Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 20 Jun 2013 19:06:09 +0200 Subject: [PATCH 73/79] USB: phy: add ralink SoC driver Signed-off-by: John Crispin --- drivers/usb/phy/Kconfig | 8 ++ drivers/usb/phy/Makefile | 1 + drivers/usb/phy/ralink-phy.c | 191 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 200 insertions(+) create mode 100644 drivers/usb/phy/ralink-phy.c diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 5de6e7f..9b899b0 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -45,3 +45,11 @@ config USB_RCAR_PHY To compile this driver as a module, choose M here: the module will be called rcar-phy. + +config RALINK_USBPHY + bool "Ralink USB PHY controller Driver" + depends on MIPS && RALINK + select USB_OTG_UTILS + help + Enable this to support ralink USB phy controller for ralink + SoCs. diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index 1a579a8..52ba41a 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_USB_ISP1301) += isp1301.o obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o +obj-$(CONFIG_RALINK_USBPHY) += ralink-phy.o diff --git a/drivers/usb/phy/ralink-phy.c b/drivers/usb/phy/ralink-phy.c new file mode 100644 index 0000000..3fbabea --- /dev/null +++ b/drivers/usb/phy/ralink-phy.c @@ -0,0 +1,191 @@ +/* + * Copyright (C) 2013 John Crispin + * + * based on: Renesas R-Car USB phy driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define RT_SYSC_REG_SYSCFG1 0x014 +#define RT_SYSC_REG_CLKCFG1 0x030 +#define RT_SYSC_REG_USB_PHY_CFG 0x05c + +#define RT_RSTCTRL_UDEV BIT(25) +#define RT_RSTCTRL_UHST BIT(22) +#define RT_SYSCFG1_USB0_HOST_MODE BIT(10) + +#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25) +#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20) +#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18) + +#define USB_PHY_UTMI_8B60M BIT(1) +#define UDEV_WAKEUP BIT(0) + +static atomic_t usb_pwr_ref = ATOMIC_INIT(0); +static struct reset_control *rstdev; +static struct reset_control *rsthost; +static u32 phy_clk; + +static void usb_phy_enable(int state) +{ + if (state) + rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1); + else + rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1); + mdelay(100); +} + +static int usb_power_on(struct usb_phy *phy) +{ + if (atomic_inc_return(&usb_pwr_ref) == 1) { + u32 t; + + usb_phy_enable(1); + + reset_control_assert(rstdev); + reset_control_assert(rsthost); + + if (OTG_STATE_B_HOST) { + rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1); + reset_control_deassert(rsthost); + } else { + rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1); + reset_control_deassert(rstdev); + } + mdelay(100); + + t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG); + dev_info(phy->dev, "remote usb device wakeup %s\n", + (t & UDEV_WAKEUP) ? ("enabbled") : ("disabled")); + if (t & USB_PHY_UTMI_8B60M) + dev_info(phy->dev, "UTMI 8bit 60MHz\n"); + else + dev_info(phy->dev, "UTMI 16bit 30MHz\n"); + } + + return 0; +} + +static void usb_power_off(struct usb_phy *phy) +{ + if (atomic_dec_return(&usb_pwr_ref) == 0) { + usb_phy_enable(0); + reset_control_assert(rstdev); + reset_control_assert(rsthost); + } +} + +static int usb_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + otg->gadget = NULL; + otg->host = host; + + return 0; +} + +static int usb_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + otg->host = NULL; + otg->gadget = gadget; + + return 0; +} + +static const struct of_device_id ralink_usbphy_dt_match[] = { + { .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) }, + { .compatible = "ralink,mt7620a-usbphy", .data = (void *) MT7620_CLKCFG1_UPHY0_CLK_EN }, + {}, +}; +MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match); + +static int usb_phy_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct device *dev = &pdev->dev; + struct usb_otg *otg; + struct usb_phy *phy; + int ret; + + match = of_match_device(ralink_usbphy_dt_match, &pdev->dev); + phy_clk = (int) match->data; + + rsthost = devm_reset_control_get(&pdev->dev, "host"); + if (IS_ERR(rsthost)) + return PTR_ERR(rsthost); + + rstdev = devm_reset_control_get(&pdev->dev, "device"); + if (IS_ERR(rstdev)) + return PTR_ERR(rstdev); + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n"); + return -ENOMEM; + } + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) { + dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n"); + return -ENOMEM; + } + + phy->dev = dev; + phy->label = dev_name(dev); + phy->init = usb_power_on; + phy->shutdown = usb_power_off; + otg->set_host = usb_set_host; + otg->set_peripheral = usb_set_peripheral; + otg->phy = phy; + phy->otg = otg; + ret = usb_add_phy(phy, USB_PHY_TYPE_USB2); + + if (ret < 0) { + dev_err(dev, "usb phy addition error\n"); + return ret; + } + + platform_set_drvdata(pdev, phy); + + dev_info(&pdev->dev, "loaded\n"); + + return ret; +} + +static int usb_phy_remove(struct platform_device *pdev) +{ + struct usb_phy *phy = platform_get_drvdata(pdev); + + usb_remove_phy(phy); + + return 0; +} + +static struct platform_driver usb_phy_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "rt3xxx-usbphy", + .of_match_table = of_match_ptr(ralink_usbphy_dt_match), + }, + .probe = usb_phy_probe, + .remove = usb_phy_remove, +}; + +module_platform_driver(usb_phy_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Ralink USB phy"); +MODULE_AUTHOR("John Crispin "); -- 1.7.10.4