// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7628an_xiaomi_mi-router-4.dtsi"

/ {
	compatible = "xiaomi,mi-ra75", "mediatek,mt7628an-soc";
	model = "Xiaomi Mi AC1200 WLAN Range Extender RA75";
	aliases {
		led-boot = &led_system_amber;
		led-failsafe = &led_system_amber;
		led-running = &led_system_blue;
		led-upgrade = &led_system_amber;
		label-mac-device = &ethernet;
	};

	leds {
		compatible = "gpio-leds";

		led_system_blue: system_blue {
			label = "blue:system";
			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
		};
		led_system_amber: system_amber {
			label = "amber:system";
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
		};
		led_signal_blue: signal_blue {
			label = "blue:signal";
			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
		};
		led_signal_amber: signal_amber {
			label = "amber:signal";
			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
		};
		led_signal_red: signal_red {
			label = "red:signal";
			gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
		wps {
			label = "wps";
			gpios = <&gpio 67 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};

};

&state_default {
	gpio {
		groups = "gpio", "refclk", "wdt", "wled_an", "uart1";
		function = "gpio";
	};
};

&partitions {
	partition@60000 {
		label = "overlay";
		reg = <0x60000 0x100000>;
		read-only;
	};

	partition@160000 {
		label = "firmware";
		reg = <0x160000 0xea0000>;
		compatible = "denx,uimage";
	};
};

&pcie {
	status = "okay";
};

&pcie0 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		mediatek,mtd-eeprom = <&factory 0x8000>;
		ieee80211-freq-limit = <5000000 6000000>;
	};
};

&ethernet {
	nvmem-cells = <&macaddr_factory_28>;
	nvmem-cell-names = "mac-address";
};

&wmac {
	ralink,mtd-eeprom = <&factory 0x0>;
};


&esw {
	mediatek,portmap = <0x3e>;
	mediatek,portdisable = <0x2a>;
};

&ehci {
	status = "disabled";
};

&ohci {
	status = "disabled";
};

&factory {
	compatible = "nvmem-cells";
	#address-cells = <1>;
	#size-cells = <1>;

	macaddr_factory_4: macaddr@4 {
		reg = <0x4 0x6>;
	};

	macaddr_factory_28: macaddr@28 {
		reg = <0x28 0x6>;
	};
	macaddr_factory_8004: macaddr@8004 {
		reg = <0x8004 0x6>;
	};
};