#include "mt7628an.dtsi" #include #include / { compatible = "wavlink,wl-wn575a3", "mediatek,mt7628an-soc"; model = "Wavlink WL-WN575A3"; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 43 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; wifi-high { label = "green:wifi-high"; gpios = <&gpio 37 GPIO_ACTIVE_LOW>; }; wifi-med { label = "green:wifi-med"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; wifi-low { label = "green:wifi-low"; gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; wps { label = "green:wps"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; }; }; &state_default { gpio { groups = "i2c", "wled_an", "gpio", "refclk", "wdt", "p0led_an"; function = "gpio"; }; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; }; &wmac { status = "okay"; }; ðernet { nvmem-cells = <&macaddr_factory_28>; nvmem-cell-names = "mac-address"; }; &esw { mediatek,portmap = <0x2f>; }; &factory { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_factory_28: macaddr@28 { reg = <0x28 0x6>; }; };