// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include / { compatible = "wavlink,ws-wn572hp3-4g", "mediatek,mt7621-soc"; model = "Wavlink WS-WN572HP3 4G"; chosen { bootargs = "console=ttyS0,115200"; }; aliases { label-mac-device = &wifi1; led-boot = &led_status_blue; led-failsafe = &led_status_blue; led-running = &led_status_blue; led-upgrade = &led_status_blue; }; keys { compatible = "gpio-keys"; reset { label = "Reset Button"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; rssihigh { label = "blue:rssihigh"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; rssimedium { label = "blue:rssimedium"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; rssilow { label = "blue:rssilow"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; led_status_blue: status_blue { label = "blue:status"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; // gpio 15 would be Quectels PWRKEY if used }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "config"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { compatible = "denx,fit"; label = "firmware"; reg = <0x50000 0xf30000>; }; partition@f00000 { label = "vendor"; reg = <0xf80000 0x80000>; read-only; }; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi0: mt76@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0>; }; }; &pcie1 { wifi1: mt76@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_e000>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy4>; nvmem-cells = <&macaddr_factory_e006>; nvmem-cell-names = "mac-address"; }; &mdio { ethphy4: ethernet-phy@4 { reg = <4>; }; }; &switch0 { ports { port@1 { status = "okay"; label = "lan"; }; }; }; &state_default { gpio { groups = "wdt"; function = "gpio"; }; }; &factory { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_factory_e000: macaddr@e000 { reg = <0xe000 0x6>; }; macaddr_factory_e006: macaddr@e006 { reg = <0xe006 0x6>; }; }; &wifi0{ ieee80211-freq-limit = <2400000 2500000>; }; &wifi1{ ieee80211-freq-limit = <5000000 6000000>; };