// SPDX-License-Identifier: GPL-2.0-only or MIT /dts-v1/; #include "mt7621.dtsi" #include #include / { compatible = "netgear,wac104", "mediatek,mt7621-soc"; model = "Netgear WAC104"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = &gmac0; }; keys { compatible = "gpio-keys"; wps { label = "wps"; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; linux,code = ; }; wifi { label = "wifi"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; wps { label = "wac104:green:wps"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; led_power: power { label = "wac104:green:power"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; wifi { label = "wac104:green:wifi"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; }; }; &gmac0 { mtd-mac-address = <&factory 0x4>; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x100000>; read-only; }; partition@100000 { label = "SC PID"; reg = <0x100000 0x100000>; read-only; }; partition@200000 { label = "kernel"; reg = <0x200000 0x400000>; }; partition@600000 { label = "ubi"; reg = <0x600000 0x1c00000>; }; factory: partition@2e00000 { label = "factory"; reg = <0x2e00000 0x100000>; read-only; }; partition@4200000 { label = "reserved"; reg = <0x4200000 0x3c00000>; read-only; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0>; ieee80211-freq-limit = <2400000 2500000>; }; }; &state_default { gpio { groups = "uart3", "jtag", "wdt"; function = "gpio"; }; }; &switch0 { ports { port@0 { status = "okay"; label = "lan4"; }; port@1 { status = "okay"; label = "lan3"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan1"; }; }; }; &xhci { status = "disabled"; };