// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include #include / { compatible = "humax,e10", "mediatek,mt7621-soc"; model = "HUMAX E10"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = &wan; }; gpio-export { compatible = "gpio-export"; gpio-usb-power { gpio-export,name = "power:usb"; gpio-export,output = <1>; gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; }; }; leds { compatible = "gpio-leds"; led_power: power { label = "green:power"; gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; }; pairing { label = "green:pairing"; gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; wlan { label = "green:wlan"; gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; }; wps { label = "green:wps"; gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; }; }; keys { compatible = "gpio-keys"; wps-reset { label = "wps_reset"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x30000>; read-only; }; partition@70000 { compatible = "openwrt,uimage", "denx,uimage"; openwrt,offset = ; openwrt,partition-magic = ; label = "firmware"; reg = <0x70000 0xf90000>; }; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0000>; ieee80211-freq-limit = <2400000 2500000>; }; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_10007>; nvmem-cell-names = "mac-address"; }; &switch0 { ports { wan: port@0 { status = "okay"; label = "wan"; nvmem-cells = <&macaddr_factory_1000d>; nvmem-cell-names = "mac-address"; }; port@1 { status = "okay"; label = "lan"; }; }; }; &state_default { gpio { groups = "jtag", "uart2", "uart3", "wdt"; function = "gpio"; }; }; &factory { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_factory_10007: macaddr@10007 { reg = <0x10007 0x6>; }; macaddr_factory_1000d: macaddr@1000d { reg = <0x1000d 0x6>; }; };