// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include / { compatible = "cudy,wr2100", "mediatek,mt7621-soc"; model = "Cudy WR2100"; aliases { led-boot = &led_internet_blue; led-failsafe = &led_internet_blue; led-running = &led_internet_blue; led-upgrade = &led_internet_blue; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,115200"; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 10 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led_internet_blue: internet_blue { label = "blue:internet"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; internet_red { label = "red:internet"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; wan { label = "green:wan"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; lan1 { label = "green:lan1"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; lan2 { label = "green:lan2"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; lan3 { label = "green:lan3"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; lan4 { label = "green:lan4"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; }; }; &gmac0 { nvmem-cells = <&macaddr_bdinfo_de00>; nvmem-cell-names = "mac-address"; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0000>; ieee80211-freq-limit = <2400000 2500000>; }; }; &pcie1 { wifi@1,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0xf80000>; }; partition@fd0000 { label = "debug"; reg = <0xfd0000 0x10000>; read-only; }; partition@fe0000 { label = "backup"; reg = <0xfe0000 0x10000>; read-only; }; bdinfo: partition@ff0000 { label = "bdinfo"; reg = <0xff0000 0x10000>; read-only; }; }; }; }; &state_default { gpio { groups = "i2c", "jtag", "uart2", "uart3", "wdt"; function = "gpio"; }; }; &switch0 { ports { port@0 { status = "okay"; label = "lan1"; }; port@1 { status = "okay"; label = "lan2"; }; port@2 { status = "okay"; label = "lan3"; }; port@3 { status = "okay"; label = "lan4"; }; port@4 { status = "okay"; label = "wan"; nvmem-cells = <&macaddr_bdinfo_de00>; nvmem-cell-names = "mac-address"; mac-address-increment = <1>; }; }; }; &bdinfo { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_bdinfo_de00: macaddr@de00 { reg = <0xde00 0x6>; }; };