// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7621.dtsi" #include #include / { compatible = "bolt,arion", "mediatek,mt7621-soc"; model = "Bolt Arion"; aliases { label-mac-device = &wan; }; chosen { bootargs = "console=ttyS0,57600n8"; }; leds { compatible = "gpio-leds"; led_wlan_blue: wlan_blue { label = "blue:wlan"; gpios = <&gpio 43 GPIO_ACTIVE_LOW>; }; led_wlan_red: wlan_red { label = "red:wlan"; gpios = <&gpio 86 GPIO_ACTIVE_LOW>; }; led_tel_blue: tel_blue { label = "blue:tel"; gpios = <&gpio 41 GPIO_ACTIVE_LOW>; }; led_sig1_blue: sig1_blue { label = "blue:sig1"; gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; led_sig1_red: sig1_red { label = "red:sig1"; gpios = <&gpio 87 GPIO_ACTIVE_LOW>; }; led_sig2_blue: sig2_blue { label = "blue:sig2"; gpios = <&gpio 45 GPIO_ACTIVE_LOW>; }; led_sig3_blue: sig3_blue { label = "blue:sig3"; gpios = <&gpio 46 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 26 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "WPS"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x20000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x20000 0x20000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x1fb0000>; }; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "pci14c3,7603"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0000>; ieee80211-freq-limit = <2400000 2500000>; }; }; &pcie1 { wifi@0,0 { compatible = "pci14c3,7662"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_4000>; nvmem-cell-names = "mac-address"; mac-address-increment = <3>; }; &switch0 { ports { port@0 { status = "okay"; label = "modem"; }; wan: port@1 { status = "okay"; label = "wan"; nvmem-cells = <&macaddr_factory_4000>; nvmem-cell-names = "mac-address"; }; port@2 { status = "okay"; label = "lan"; }; }; }; &state_default { gpio { groups = "jtag", "uart2", "uart3", "wdt"; function = "gpio"; }; }; &factory { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_factory_4000: macaddr@4000 { reg = <0x28 0x6>; }; };