// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7620a.dtsi" #include #include / { compatible = "alfa-network,tube-e4g", "ralink,mt7620a-soc"; model = "ALFA Network Tube-E4G"; aliases { label-mac-device = ðernet; led-boot = &power; led-failsafe = &power; led-running = &power; led-upgrade = &power; }; chosen { bootargs = "console=ttyS0,115200"; }; gpio-export { compatible = "gpio-export"; #size-cells = <0>; modem-enable { gpio-export,name = "modem-enable"; gpio-export,output = <1>; gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; modem-rf-enable { gpio-export,name = "modem-rf-enable"; gpio-export,output = <1>; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; sim-select { gpio-export,name = "sim-select"; gpio-export,output = <0>; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; sim1-detect { gpio-export,name = "sim1-detect"; gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; sim2-detect { gpio-export,name = "sim2-detect"; gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; 4g { label = "green:4g"; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; }; lan { label = "blue:lan"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; }; power: power { label = "green:power"; gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; default-state = "keep"; }; sim1 { label = "green:sim1"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; default-state = "keep"; }; sim2 { label = "green:sim2"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; default-state = "keep"; }; }; }; &ehci { status = "okay"; }; ðernet { mtd-mac-address = <&factory 0x28>; }; &gpio1 { status = "okay"; }; &gpio2 { status = "okay"; }; &ohci { status = "okay"; }; &pcie { status = "disabled"; }; &state_default { gpio { groups = "ephy", "nd_sd", "pcie", "uartf"; function = "gpio"; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x1000>; }; partition@31000 { label = "config"; reg = <0x31000 0xf000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0xfb0000>; }; }; }; }; &wmac { status = "disabled"; };