/dts-v1/; #include "rt3050.dtsi" #include #include / { compatible = "sparklan,wcr150gn", "ralink,rt3050-soc"; model = "Sparklan WCR-150GN"; cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x3b0000>; }; }; gpio-leds { compatible = "gpio-leds"; user { label = "wcr-150gn:amber:user"; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; power { label = "wcr-150gn:amber:power"; gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; wps { label = "wps"; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; ralink,function = "gpio"; }; }; }; ðernet { mtd-mac-address = <&factory 0x4>; }; &esw { mediatek,portmap = <0x2f>; }; &wmac { ralink,mtd-eeprom = <&factory 0>; }; &otg { status = "okay"; }; >upstream openwrtJames
aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts/WT1520-8M.dts
blob: 0451998b65b5d4b368fa7e74d1896edc449165ab (plain) 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43

/dts-v1/;

#include "WT1520.dtsi"

/ {
	compatible = "nexx,wt1520-8m", "nexx,wt1520", "ralink,rt5350-soc";
	model = "Nexx WT1520 (8M)";
};

&spi0 {
	status = "okay";

	m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x30000>;
			read-only;
		};

		partition@30000 {
			label = "u-boot-env";
			reg = <0x30000 0x10000>;
			read-only;
		};

		factory: partition@40000 {
			label = "factory";
			reg = <0x40000 0x10000>;
			read-only;
		};

		partition@50000 {
			label = "firmware";
			reg = <0x50000 0x7b0000>;
		};
	};
};