/dts-v1/; /include/ "mt7628an.dtsi" / { compatible = "mediatek,linkit", "mediatek,mt7628an-soc"; model = "MediaTek LinkIt Smart7688"; chosen { bootargs = "console=ttyS2,57600"; }; memory@0 { device_type = "memory"; reg = <0x0 0x8000000>; }; pinctrl { state_default: pinctrl0 { gpio { ralink,group = "gpio"; ralink,function = "gpio"; }; perst { ralink,group = "perst"; ralink,function = "gpio"; }; refclk { ralink,group = "refclk"; ralink,function = "gpio"; }; i2s { ralink,group = "i2s"; ralink,function = "gpio"; }; spis { ralink,group = "spis"; ralink,function = "gpio"; }; wled_kn { ralink,group = "wled_kn"; ralink,function = "gpio"; }; wled_an { ralink,group = "wled_an"; ralink,function = "wled_an"; }; wdt { ralink,group = "wdt"; ralink,function = "gpio"; }; }; }; palmbus@10000000 { spi@b00 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mx25l25635e"; reg = <0 0>; linux,modalias = "m25p80", "mx25l25635e"; spi-max-frequency = <40000000>; m25p,chunked-io = <31>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "firmware"; reg = <0x50000 0x1fb0000>; }; }; spidev@1 { #address-cells = <1>; #size-cells = <1>; compatible = "spidev"; reg = <1 0>; spi-max-frequency = <40000000>; }; }; i2c@900 { status = "okay"; }; uart1@d00 { status = "okay"; }; uart2@e00 { status = "okay"; }; pwm@5000 { status = "okay"; }; }; ethernet@10100000 { mtd-mac-address = <&factory 0x28>; }; sdhci@10130000 { status = "okay"; mediatek,cd-high; // mediatek,cd-poll; }; bootstrap { compatible = "mediatek,linkit"; status = "okay"; }; gpio-leds { compatible = "gpio-leds"; wifi { label = "mediatek:orange:wifi"; gpios = <&wgpio 0 0>; default-state = "on"; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; wps { label = "reset"; gpios = <&gpio1 6 1>; linux,code = <0x211>; }; }; wgpio: gpio-wifi { #address-cells = <1>; #size-cells = <0>; compatible = "mediatek,gpio-wifi"; gpio-controller; #gpio-cells = <2>; }; };