/dts-v1/; #include "rt3050.dtsi" #include #include / { compatible = "dlink,dap-1350", "ralink,rt3052-soc"; model = "D-Link DAP-1350"; chosen { bootargs = "console=ttyS0,115200"; }; cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; devdata: partition@30000 { label = "devdata"; reg = <0x30000 0x10000>; read-only; }; partition@40000 { label = "devconf"; reg = <0x40000 0x30000>; read-only; }; partition@70000 { label = "devlang"; reg = <0x70000 0x40000>; read-only; }; partition@b0000 { label = "firmware"; reg = <0xb0000 0x750000>; }; }; gpio-leds { compatible = "gpio-leds"; power { label = "dap-1350:blue:power"; gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; power2 { label = "dap-1350:red:power"; gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; }; wps { label = "dap-1350:blue:wps"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = ; }; rt { label = "rt"; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; linux,code = ; }; ap { label = "ap"; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; ralink,function = "gpio"; }; }; }; ðernet { mtd-mac-address = <&devdata 0x2e>; }; &esw { mediatek,portmap = <0x2f>; }; &wmac { ralink,mtd-eeprom = <&devdata 0>; }; &otg { status = "okay"; }; cgit.cgi/openwrt/upstream/tree/target/linux/rb532/Makefile?h=v22.03.0&id=dd1f19f4c7c323a5a269b798bda277b25d59231f'>treecommitdiffstats
blob: 175ed4eecf993313a921df51032ad4b1e65cac5c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19