/dts-v1/; #include "rt3883.dtsi" #include #include / { compatible = "samsung,cy-swr1100", "ralink,rt3883-soc"; model = "Samsung CY-SWR1100"; aliases { led-boot = &led_wps; led-failsafe = &led_wps; }; nor-flash@1c000000 { compatible = "cfi-flash"; reg = <0x1c000000 0x800000>; bank-width = <2>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "uboot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "uboot-env"; reg = <0x30000 0x4000>; read-only; }; factory: partition@34000 { label = "factory"; reg = <0x34000 0x4000>; read-only; }; partition@38000 { label = "nvram"; reg = <0x38000 0x8000>; read-only; }; partition@40000 { label = "devdata"; reg = <0x40000 0x10000>; }; partition@50000 { compatible = "seama"; label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; rtl8367 { compatible = "realtek,rtl8367"; gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>; gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>; realtek,extif0 = <1 0 1 1 1 1 1 1 2>; }; keys { compatible = "gpio-keys-polled"; poll-interval = <100>; reset { label = "reset"; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led_wps: wps { label = "cy-swr1100:blue:wps"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; }; usb { label = "cy-swr1100:blue:usb"; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>; linux,default-trigger = "usbport"; }; }; }; &gpio1 { status = "okay"; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "i2c", "spi"; ralink,function = "gpio"; }; }; }; ðernet { port@0 { mediatek,fixed-link = <1000 1 1 1>; phy-mode = "rgmii"; }; }; &pci { status = "okay"; }; &pci1 { status = "okay"; wifi@0,0 { compatible = "pci0,0"; reg = <0x10000 0 0 0 0>; ralink,5ghz = <0>; ralink,mtd-eeprom = <&factory 0x2000>; }; }; &wmac { status = "okay"; ralink,2ghz = <0>; ralink,mtd-eeprom = <&factory 0>; }; &ehci { status = "okay"; }; &ohci { status = "okay"; }; diff/target/linux/ramips/dts/TPLINK-8M.dtsi?h=v19.07.10&id=5d30ff1bc6e5a4f0d1f65f12aa062caf5278ab08'>diffstats
path: root/target/linux/ramips/dts/TPLINK-8M.dtsi
blob: 9f7f7ccd6c78c9f2b321ab08dccbfdceda320231 (plain) 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71

#include "mt7628an.dtsi"

/ {
	chosen {
		bootargs = "console=ttyS0,115200";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x4000000>;
	};
};

&spi0 {
	status = "okay";

	m25p80@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "boot";
				reg = <0x0 0x20000>;
				read-only;
			};

			partition@20000 {
				compatible = "tplink,firmware";
				label = "firmware";
				reg = <0x20000 0x7a0000>;
			};

			partition@7c0000 {
				label = "config";
				reg = <0x7c0000 0x10000>;
				read-only;
			};

			factory: partition@7d0000 {
				label = "factory";
				reg = <0x7d0000 0x30000>;
				read-only;
			};
		};
	};
};

&ehci {
	status = "disabled";
};

&ohci {
	status = "disabled";
};

&wmac {
	status = "okay";
	mtd-mac-address = <&factory 0xf100>;
	mediatek,mtd-eeprom = <&factory 0x20000>;
};

&ethernet {
	mtd-mac-address = <&factory 0xf100>;
	mediatek,portmap = "llllw";
};