From fed7cef5e4f2df8c6a79bebf5da1fdd3783ff6f3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Marek=20Beh=C3=BAn?= Date: Mon, 4 Jul 2022 13:36:22 +0200 Subject: [PATCH] ARM: dts: turris-omnia: enable LED controller node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The LED controller node is disabled because the leds-turris-omnia driver does not support setting the LED blinking to be controlled by the MCU. The patches for that have now been sent [1], so let's enable the node. [1] https://lore.kernel.org/linux-leds/20220704105955.15474-1-kabel@kernel.org/T/ Signed-off-by: Marek Behún --- arch/arm/boot/dts/armada-385-turris-omnia.dts | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -189,15 +189,13 @@ reg = <0x2b>; #address-cells = <1>; #size-cells = <0>; + status = "okay"; /* * LEDs are controlled by MCU (STM32F0) at * address 0x2b. * - * The driver does not support HW control mode - * for the LEDs yet. Disable the LEDs for now. - * - * Also LED functions are not stable yet: + * LED functions are not stable yet: * - there are 3 LEDs connected via MCU to PCIe * ports. One of these ports supports mSATA. * There is no mSATA nor PCIe function. @@ -208,7 +206,6 @@ * B. Again there is no such function defined. * For now we use LED_FUNCTION_INDICATOR */ - status = "disabled"; multi-led@0 { reg = <0x0>;