// SPDX-License-Identifier: GPL-2.0-or-later or MIT

#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>

/include/ "fsl/p1010si-pre.dtsi"

/ {
	model = "Watchguard Firebox T10";
	compatible = "watchguard,firebox-t10";

	chosen {
		bootargs = "console=ttyS0,115200";
		bootargs-override = "console=ttyS0,115200";
	};

	aliases {
		spi0 = &spi0;
		led-boot = &led_mode;
		led-failsafe = &led_failover;
		led-running = &led_mode;
		led-upgrade = &led_attention;
	};

	memory {
		device_type = "memory";
	};

	leds {
		compatible = "gpio-leds";

		led_attention: attention_orange {
			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
			label = "orange:attention";
		};

		status_red {
			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
			label = "red:status";
		};

		led_mode: mode_green {
			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
			label = "green:mode";
		};

		led_failover: failover_green {
			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
			label = "green:failover";
		};
	};

	buttons {
		compatible = "gpio-keys";

		reset {
			label = "Reset button";
			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};


	soc: soc@ffe00000 {
		ranges = <0x0 0x0 0xffe00000 0x100000>;

		i2c@3000 {
			rtc@30 {
				compatible = "sii,s35390a";
				reg = <0x30>;
			};
		};

		spi0: spi@7000 {
			flash@0 {
				compatible = "jedec,spi-nor";
				reg = <0>;
				spi-max-frequency = <25000000>;

				partitions {
					compatible = "fixed-partitions";
					#address-cells = <1>;
					#size-cells = <1>;

					uboot: partition@0 {
						reg = <0x0 0x90000>;
						label = "u-boot";
						read-only;
					};

					partition@90000 {
						reg = <0x90000 0x10000>;
						label = "u-boot-env";
					};

					partition@a0000 {
						reg = <0xa0000 0x20000>;
						label = "cfgxxx";
						read-only;
					};

					partition@c0000 {
						reg = <0xc0000 0x40000>;
						label = "device_id";
						read-only;
					};
				};
			};
		};

		gpio0: gpio-controller@fc00 {
		};

		usb@22000 {
			phy_type = "utmi";
			dr_mode = "host";
		};

		mdio@24000 {
			phy1: ethernet-phy@1 {
				reg = <0x1>;
			};

			phy2: ethernet-phy@2 {
				reg = <0x2>;
			};

			phy3: ethernet-phy@3 {
				reg = <0x3>;
			};
		};

		mdio@25000 {
			tbi_phy1: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
			};
		};

		mdio@26000 {
			tbi_phy2: tbi-phy@11 {
				reg = <0x11>;
				device_type = "tbi-phy";
			};
		};

		enet0: ethernet@b0000 {
			phy-handle = <&phy1>;
			phy-connection-type = "rgmii-id";
		};

		enet1: ethernet@b1000 {
			tbi-handle = <&tbi_phy1>;
			phy-handle = <&phy2>;
			phy-connection-type = "sgmii";
		};

		enet2: ethernet@b2000 {
			tbi-handle = <&tbi_phy2>;
			phy-handle = <&phy3>;
			phy-connection-type = "sgmii";
		};

		sdhc@2e000 {
			status = "disabled";
		};

		serial1: serial@4600 {
			status = "disabled";
		};

		can0: can@1c000 {
			status = "disabled";
		};

		can1: can@1d000 {
			status = "disabled";
		};
	};

	pci0: pcie@ffe09000 {
		status = "disabled";
	};

	pci1: pcie@ffe0a000 {
		status = "disabled";
	};

	ifc: ifc@ffe1e000 {
		reg = <0x0 0xffe1e000 0 0x2000>;

		/* NOR, NAND Flashes and CPLD on board */
		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
			0x1 0x0 0x0 0xff800000 0x00010000
			0x3 0x0 0x0 0xffb00000 0x00000020>;

		nand@1,0 {
			compatible = "fsl,ifc-nand";
			reg = <0x1 0x0 0x10000>;

			partitions {
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				/*
				 * Original partition layout:
				 * 0x000000000000-0x000000020000 : "NAND (RW) WG DTB Image"
				 * 0x000000020000-0x000000520000 : "NAND (RW) WG SYSA Kernel"
				 * 0x000000520000-0x000007f00000 : "NAND (RW) WG SYSA_CODE"
				 * 0x000007f00000-0x000008400000 : "NAND (RW) WG SYSB Kernel"
				 * 0x000008400000-0x000009c00000 : "NAND (RW) WG SYSB_CODE"
				 * 0x000009c00000-0x00000a100000 : "NAND (RW) WG SYSA2 Kernel"
				 * 0x00000a100000-0x000011ae0000 : "NAND (RW) WG SYSA_CODE2"
				 * 0x000011ae0000-0x000020000000 : "NAND (RW) WG SYSA_DATA"
				 */

				partition@0 {
					reg = <0x0 0x20000>;
					label = "wg-dtb";
					read-only;
				};

				partition@20000 {
					reg = <0x20000 0x500000>;
					label = "kernel";
				};

				partition@520000 {
					reg = <0x520000 0x79e0000>;
					label = "wg-sysa-rootfs";
					read-only;
				};

				partition@7f00000 {
					reg = <0x7f00000 0x500000>;
					label = "wg-sysb-kernel";
					read-only;
				};

				partition@8400000 {
					reg = <0x8400000 0x1800000>;
					label = "wg-sysb-rootfs";
					read-only;
				};

				partition@9c00000 {
					reg = <0x9c00000 0x500000>;
					label = "wg-sysa2-kernel";
					read-only;
				};

				partition@a100000 {
					reg = <0xa100000 0x79e0000>;
					label = "wg-sysa2-rootfs";
					read-only;
				};

				partition@11ae0000 {
					reg = <0x11ae0000 0xe520000>;
					label = "ubi";
				};
			};
		};
	};
};

/include/ "fsl/p1010si-post.dtsi"