// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Aerohive BR200-WP Device Tree Source
 *
 * Based on: Aerohive HiveAP-330 Device Tree Source
 *
 * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
 * Copyright (C) 2023 Pawel Dembicki <paweldembicki@gmail.com>
 */

#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>

/include/ "fsl/p1020si-pre.dtsi"

/ {
	model = "Aerohive BR200-WP";
	compatible = "aerohive,br200-wp";

	chosen {
		bootargs = "console=ttyS0,9600";
		bootargs-override = "console=ttyS0,9600 noinitrd";
	};

	aliases {
		led-boot = &led_attention;
		led-failsafe = &led_attention;
		led-running = &led_status;
		led-upgrade = &led_status;
		label-mac-device = &enet0;
	};

	memory {
		device_type = "memory";
	};

	cpus {
		/delete-property/ PowerPC,P1020@1; /* P1011 have one core only */
	};

	board_lbc: lbc: localbus@ffe05000 {
		reg = <0 0xffe05000 0 0x1000>;
		ranges = <0x0 0x0 0x0 0xec000000 0x4000000>;

		nor@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x4000000>;
			bank-width = <2>;
			device-width = <1>;

			partitions {
				compatible = "fixed-partitions";
				#address-cells = <1>;
				#size-cells = <1>;

				partition@0 {
					reg = <0x0 0x40000>;
					label = "dtb";
				};

				partition@40000 {
					reg = <0x40000 0x40000>;
					label = "initramfs";
				};

				partition@80000 {
					reg = <0x80000 0x27c0000>;
					label = "rootfs";
				};

				partition@2840000 {
					reg = <0x2840000 0x800000>;
					label = "kernel";
				};

				partition@3040000 {
					reg = <0x3040000 0xec0000>;
					label = "stock-jffs2";
					read-only;
				};

				partition@3f00000 {
					reg = <0x3f00000 0x20000>;
					label = "hw-info";
					read-only;

					compatible = "nvmem-cells";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_hwinfo_0: macaddr@0 {
						reg = <0x0 0x6>;
					};
				};

				partition@3f20000 {
					reg = <0x3f20000 0x20000>;
					label = "boot-info";
					read-only;
				};

				partition@3f40000 {
					reg = <0x3f40000 0x20000>;
					label = "boot-info-backup";
					read-only;
				};

				partition@3f60000 {
					reg = <0x3f60000 0x20000>;
					label = "u-boot-env";
				};

				partition@3f80000 {
					reg = <0x3f80000 0x80000>;
					label = "u-boot";
					read-only;
				};

				firmware@0 {
					reg = <0x0 0x3040000>;
					label = "firmware";
				};
			};
		};
	};

	board_soc: soc: soc@ffe00000 {
		ranges = <0x0 0x0 0xffe00000 0x100000>;

		mdio@24000 {

			phy_port1: phy@0 {
				reg = <0>;
			};

			phy_port2: phy@1 {
				reg = <1>;
			};

			phy_port3: phy@2 {
				reg = <2>;
			};

			phy_port4: phy@3 {
				reg = <3>;
			};

			phy_port5: phy@4 {
				reg = <4>;
			};

			switch@10 {
				compatible = "qca,qca8327";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x10>;
				reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@1 {
						reg = <1>;
						label = "lan1";
						phy-handle = <&phy_port1>;
						nvmem-cells = <&macaddr_hwinfo_0>;
						nvmem-cell-names = "mac-address";
						mac-address-increment = <2>;
					};

					port@2 {
						reg = <2>;
						label = "lan2";
						phy-handle = <&phy_port2>;
						nvmem-cells = <&macaddr_hwinfo_0>;
						nvmem-cell-names = "mac-address";
						mac-address-increment = <3>;
					};

					port@3 {
						reg = <3>;
						label = "lan3";
						phy-handle = <&phy_port3>;
						nvmem-cells = <&macaddr_hwinfo_0>;
						nvmem-cell-names = "mac-address";
						mac-address-increment = <4>;
					};

					port@4 {
						reg = <4>;
						label = "lan4";
						phy-handle = <&phy_port4>;
						nvmem-cells = <&macaddr_hwinfo_0>;
						nvmem-cell-names = "mac-address";
						mac-address-increment = <5>;
					};

					port@5 {
						reg = <5>;
						label = "wan";
						phy-handle = <&phy_port5>;
						nvmem-cells = <&macaddr_hwinfo_0>;
						nvmem-cell-names = "mac-address";
					};

					port@6 {
						reg = <6>;
						ethernet = <&enet0>;
						phy-mode = "rgmii-id";

						fixed-link {
							speed = <1000>;
							full-duplex;
						};
					};
				};
			};
		};

		mdio@25000 {
			status = "disabled";
		};

		mdio@26000 {
			status = "disabled";
		};

		enet0: ethernet@b0000 {
			status = "okay";
			phy-connection-type = "rgmii-id";
			nvmem-cells = <&macaddr_hwinfo_0>;
			nvmem-cell-names = "mac-address";

			fixed-link {
				speed = <1000>;
				full-duplex;
			};
		};

		enet1: ethernet@b1000 {
			status = "disabled";
		};

		enet2: ethernet@b2000 {
			status = "disabled";
		};

		gpio0: gpio-controller@fc00 {
		};

		usb@22000 {
			phy_type = "ulpi";
			dr_mode = "host";
		};

		usb@23000 {
			status = "disabled";
		};
	};

	pci0: pcie@ffe09000 {
		status = "disabled";
	};

	pci1: pcie@ffe0a000 {
		reg = <0x0 0xffe0a000 0x0 0x1000>;
		ranges = <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000
				  0x1000000 0x0 0x00000000 0x0 0xffc20000 0x0 0x10000>;

		reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;

		pcie@0 {
			ranges = <0x2000000 0x0 0xc0000000
				  0x2000000 0x0 0xc0000000
				  0x0 0x20000000

				  0x1000000 0x0 0x0
				  0x1000000 0x0 0x0
				  0x0 0x100000>;

			ath9k: wifi@0,0 {
				reg = <0x0000 0 0 0 0>;
				#gpio-cells = <2>;
				gpio-controller;
				nvmem-cells = <&macaddr_hwinfo_0>;
				nvmem-cell-names = "mac-address";
				mac-address-increment = <16>;
			};
		};
	};

	leds {
		compatible = "gpio-leds";

		led_attention: led-0 {
			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
			label = "amber:status";
			color = <LED_COLOR_ID_AMBER>;
			function = LED_FUNCTION_STATUS;
		};

		led_status: led-1 {
			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
			label = "white:status";
			color = <LED_COLOR_ID_WHITE>;
			function = LED_FUNCTION_STATUS;
		};
	};

	buttons {
		compatible = "gpio-keys";

		reset {
			label = "Reset button";
			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};
};

/include/ "fsl/p1020si-post.dtsi"

/ {
	chosen {
		linux,stdout-path = "/soc@ffe00000/serial@4500";
	};

	cpus {
		PowerPC,P1020@0 {
			i-cache-sets = <0x80>;
			i-cache-size = <0x8000>;
			i-cache-block-size = <0x20>;
			d-cache-sets = <0x80>;
			d-cache-size = <0x8000>;
			d-cache-block-size = <0x20>;
			clock-frequency = <0x2756cd00>;
			bus-frequency = <0x13ab6680>;
			timebase-frequency = <0x2756cd0>;
		};
	};

	memory {
		reg = <0x00 0x00 0x00 0x10000000>;
	};

	localbus@ffe05000 {
		bus-frequency = <0x13ab668>;
	};

	soc@ffe00000 {
		bus-frequency = <0x13ab6680>;

		serial@4500 {
			clock-frequency = <0x13ab6680>;
		};

		serial@4600 {
			clock-frequency = <0x13ab6680>;
		};
	};

	pcie@ffe09000 {
		clock-frequency = <0x1fca055>;
	};

	pcie@ffe0a000 {
		clock-frequency = <0x1fca055>;
	};
};