From: Chuanjia Liu Date: Mon, 23 Aug 2021 11:27:59 +0800 Subject: [PATCH] arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622 There are two independent PCIe controllers in MT2712 and MT7622 platform. Each of them should contain an independent MSI domain. In old dts architecture, MSI domain will be inherited from the root bridge, and all of the devices will share the same MSI domain. Hence that, the PCIe devices will not work properly if the irq number which required is more than 32. Split the PCIe node for MT2712 and MT7622 platform to comply with the hardware design and fix MSI issue. Signed-off-by: Chuanjia Liu Acked-by: Ryder Lee Link: https://lore.kernel.org/r/20210823032800.1660-6-chuanjia.liu@mediatek.com Signed-off-by: Matthias Brugger --- --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -915,64 +915,67 @@ }; }; - pcie: pcie@11700000 { + pcie1: pcie@112ff000 { compatible = "mediatek,mt2712-pcie"; device_type = "pci"; - reg = <0 0x11700000 0 0x1000>, - <0 0x112ff000 0 0x1000>; - reg-names = "port0", "port1"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE0>, + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; - phys = <&u3port0 PHY_TYPE_PCIE>, <&u3port1 PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + status = "disabled"; - pcie0: pcie@0,0 { - device_type = "pci"; - status = "disabled"; - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; + + pcie0: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&pericfg CLK_PERI_PCIE0>; + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + status = "disabled"; - pcie1: pcie@1,0 { - device_type = "pci"; - status = "disabled"; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -302,18 +302,16 @@ }; }; -&pcie { +&pcie0 { pinctrl-names = "default"; - pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; + pinctrl-0 = <&pcie0_pins>; status = "okay"; +}; - pcie@0,0 { - status = "okay"; - }; - - pcie@1,0 { - status = "okay"; - }; +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins>; + status = "okay"; }; &pio { --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -232,18 +232,16 @@ }; }; -&pcie { +&pcie0 { pinctrl-names = "default"; - pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; + pinctrl-0 = <&pcie0_pins>; status = "okay"; +}; - pcie@0,0 { - status = "okay"; - }; - - pcie@1,0 { - status = "okay"; - }; +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins>; + status = "okay"; }; &pio { --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -808,75 +808,83 @@ #reset-cells = <1>; }; - pcie: pcie@1a140000 { + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0 0x1a140000 0 0x1000>; + }; + + pcie0: pcie@1a143000 { compatible = "mediatek,mt7622-pcie"; device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, - <0 0x1a143000 0 0x1000>, - <0 0x1a145000 0 0x1000>; - reg-names = "subsys", "port0", "port1"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; + interrupts = ; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P1_MAC_EN>, - <&pciesys CLK_PCIE_P0_AHB_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", - "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", - "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; + <&pciesys CLK_PCIE_P0_PIPE_EN>; + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - status = "disabled"; - - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - status = "disabled"; + pcie1: pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + status = "disabled"; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; }; };