KERNEL_LOADADDR := 0x80008000 DEVICE_VARS += UBOOT_TARGET UBOOT_OFFSET UBOOT_ENVSIZE ifneq ($(CONFIG_MTK_BOOT_PARTSIZE),) BOOTFS_BLOCK_SIZE := 1024 BOOTFS_BLOCKS := $(shell echo $$(($(CONFIG_MTK_BOOT_PARTSIZE)*1024*1024/$(BOOTFS_BLOCK_SIZE)))) endif define Build/mtk-mmc-img rm -f $@.boot mkfs.fat -C $@.boot $(BOOTFS_BLOCKS) if [ -r $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-preloader.bin ]; then \ ./gen_mtk_mmc_img.sh emmc $@.emmc \ $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-preloader.bin; \ mcopy -i $@.boot $@.emmc ::eMMCboot.bin; \ fi mkenvimage -s $(UBOOT_ENVSIZE) -o $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-uboot.env $(UBOOT_TARGET)-uEnv.txt mcopy -i $@.boot $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-uboot.env ::uboot.env mcopy -i $@.boot $(IMAGE_KERNEL) ::uImage ./gen_mtk_mmc_img.sh sd $@ \ $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-preloader.bin \ $(STAGING_DIR_IMAGE)/$(UBOOT_TARGET)-u-boot*.bin \ $(UBOOT_OFFSET) \ $@.boot \ $(IMAGE_ROOTFS) \ $(CONFIG_MTK_BOOT_PARTSIZE) \ $(CONFIG_TARGET_ROOTFS_PARTSIZE) endef define Build/preloader $(CP) $(STAGING_DIR_IMAGE)/$1-preloader.bin $@ endef define Build/scatterfile ./gen_scatterfile.sh $(subst mt,MT,$(SUBTARGET)) "$1" \ $(subst -scatter.txt,,$(notdir $@)) "$(DEVICE_TITLE)" > $@ endef define Device/bpi_bananapi-r2 DEVICE_VENDOR := Bpi DEVICE_MODEL := Banana Pi R2 DEVICE_DTS := mt7623n-bananapi-bpi-r2 DEVICE_PACKAGES := kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 kmod-mmc \ mkf2fs e2fsprogs kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk UBOOT_ENVSIZE := 0x2000 UBOOT_OFFSET := 320k UBOOT_TARGET := mt7623n_bpir2 IMAGES := img.gz IMAGE/img.gz := mtk-mmc-img | gzip | append-metadata ARTIFACT/preloader.bin := preloader $$(UBOOT_TARGET) ARTIFACT/scatter.txt := scatterfile $$(firstword $$(FILESYSTEMS))-$$(firstword $$(IMAGES)) ARTIFACTS = preloader.bin scatter.txt SUPPORTED_DEVICES := bananapi,bpi-r2 endef TARGET_DEVICES += bpi_bananapi-r2 # Full eMMC image including U-Boot and partition table define Device/unielec_u7623-emmc DEVICE_VENDOR := UniElec DEVICE_MODEL := U7623 DEVICE_VARIANT := eMMC # When we use FIT images, U-Boot will populate the /memory node with the correct # memory size discovered from the preloader, so we don't need separate builds. DEVICE_DTS := mt7623a-unielec-u7623-02-emmc-512m DEVICE_DTS_DIR := ../dts SUPPORTED_DEVICES := unielec,u7623-02-emmc-512m UBOOT_ENVSIZE := 0x1000 UBOOT_OFFSET := 256k UBOOT_TARGET := mt7623a_unielec_u7623 IMAGES := img.gz IMAGE/img.gz := mtk-mmc-img | gzip | append-metadata DEVICE_PACKAGES := kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 kmod-mmc \ mkf2fs e2fsprogs kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk ARTIFACT/scatter.txt := scatterfile $$(firstword $$(FILESYSTEMS))-$$(firstword $$(IMAGES)) ARTIFACTS := scatter.txt endef TARGET_DEVICES += unielec_u7623-emmc # Legacy partial image for U7623 # This preserves the vendor U-Boot and starts with a uImage at 0xA00 define Device/unielec_u7623-02-emmc-512m-legacy DEVICE_VENDOR := UniElec DEVICE_MODEL := U7623-02 DEVICE_VARIANT := eMMC/512MiB RAM (legacy image) DEVICE_DTS := mt7623a-unielec-u7623-02-emmc-512m DEVICE_DTS_DIR := ../dts KERNEL_NAME := zImage KERNEL := kernel-bin | append-dtb | uImage none KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none DEVICE_PACKAGES := kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 kmod-mmc \ mkf2fs e2fsprogs kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk IMAGES := sysupgrade-emmc.bin.gz IMAGE/sysupgrade-emmc.bin.gz := sysupgrade-emmc | gzip | append-metadata SUPPORTED_DEVICES := unielec,u7623-02-emmc-512m endef TARGET_DEVICES += unielec_u7623-02-emmc-512m-legacy