// SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include #include "mt7629.dtsi" / { model = "Netgear EX6250 v2"; compatible = "netgear,ex6250-v2", "mediatek,mt7629"; aliases { led-boot = &led_power_green; led-failsafe = &led_power_red; led-running = &led_power_green; led-upgrade = &led_power_red; serial0 = &uart0; }; chosen { stdout-path = "serial0:115200n8"; bootargs-override = "console=ttyS0,115200n8"; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&pio 60 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&pio 58 GPIO_ACTIVE_LOW>; linux,code = ; }; ap_mode { label = "ap_mode"; gpios = <&pio 54 GPIO_ACTIVE_LOW>; linux,code = ; }; extender_mode { label = "extender_mode"; gpios = <&pio 53 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led_power_green: power_green { label = "green:power"; gpios = <&pio 21 GPIO_ACTIVE_LOW>; }; led_power_red: power_red { label = "red:power"; gpios = <&pio 61 GPIO_ACTIVE_LOW>; }; client_green { label = "green:client"; gpios = <&pio 59 GPIO_ACTIVE_LOW>; }; client_red { label = "red:client"; gpios = <&pio 24 GPIO_ACTIVE_LOW>; }; router_green { label = "green:router"; gpios = <&pio 55 GPIO_ACTIVE_LOW>; }; router_red { label = "red:router"; gpios = <&pio 56 GPIO_ACTIVE_LOW>; }; wps_green { label = "green:wps"; gpios = <&pio 57 GPIO_ACTIVE_LOW>; }; eth_green { label = "green:eth"; gpios = <&pio 16 GPIO_ACTIVE_LOW>; }; eth_yellow { label = "yellow:eth"; gpios = <&pio 12 GPIO_ACTIVE_LOW>; }; }; }; ð { pinctrl-names = "default"; pinctrl-0 = <ð_pins>; pinctrl-1 = <&ephy_leds_pins>; status = "okay"; mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; phy-mode = "gmii"; phy-handle = <&phy0>; }; mdio-bus { #address-cells = <1>; #size-cells = <0>; phy0: ethernet-phy@0 { reg = <0>; }; }; }; &qspi { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&qspi_pins>; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Bootloader"; reg = <0x0 0x60000>; read-only; }; partition@60000 { label = "Config"; reg = <0x60000 0x10000>; read-only; }; partition@70000 { label = "Factory"; reg = <0x70000 0x10000>; read-only; }; partition@80000 { label = "firmware"; reg = <0x80000 0xcd0000>; compatible = "denx,fit"; }; partition@d50000 { label = "CFG"; reg = <0xd50000 0x80000>; read-only; }; partition@dd0000 { label = "RAE"; reg = <0xdd0000 0x200000>; read-only; }; partition@fd0000 { label = "POT"; reg = <0xfd0000 0x10000>; read-only; }; partition@fe0000 { label = "LOG"; reg = <0xfe0000 0x20000>; read-only; }; }; }; }; &pio { eth_pins: eth-pins { mux { function = "eth"; groups = "mdc_mdio"; }; }; ephy_leds_pins: ephy-leds-pins { mux { function = "led"; groups = "ephy_leds"; }; }; qspi_pins: qspi-pins { mux { function = "flash"; groups = "spi_nor"; }; }; uart0_pins: uart0-pins { mux { function = "uart"; groups = "uart0_txd_rxd" ; }; }; watchdog_pins: watchdog-pins { mux { function = "watchdog"; groups = "watchdog"; }; }; }; &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>; status = "okay"; }; &watchdog { pinctrl-names = "default"; pinctrl-0 = <&watchdog_pins>; status = "okay"; };