From 8949ebc0c5b982eab7ca493dad7b86c30befa6ec Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Wed, 17 Jan 2018 15:01:30 +0800 Subject: [PATCH 09/30] phy: support layerscape This is an integrated patch for layerscape mdio-phy support. Signed-off-by: Bogdan Purcareata Signed-off-by: Zhang Ying-22455 Signed-off-by: costi Signed-off-by: Madalin Bucur Signed-off-by: Shaohui Xie Signed-off-by: Florian Fainelli Signed-off-by: Yangbo Lu --- drivers/net/phy/Kconfig | 11 + drivers/net/phy/Makefile | 2 + drivers/net/phy/aquantia.c | 28 + drivers/net/phy/cortina.c | 118 ++++ drivers/net/phy/fsl_backplane.c | 1358 +++++++++++++++++++++++++++++++++++++++ drivers/net/phy/marvell.c | 2 +- drivers/net/phy/phy.c | 23 +- drivers/net/phy/phy_device.c | 6 +- drivers/net/phy/swphy.c | 1 + include/linux/phy.h | 6 + 10 files changed, 1547 insertions(+), 8 deletions(-) create mode 100644 drivers/net/phy/cortina.c create mode 100644 drivers/net/phy/fsl_backplane.c --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -89,6 +89,12 @@ config MDIO_BUS_MUX_MMIOREG config MDIO_CAVIUM tristate +config MDIO_FSL_BACKPLANE + tristate "Support for backplane on Freescale XFI interface" + depends on OF_MDIO + help + This module provides a driver for Freescale XFI's backplane. + config MDIO_GPIO tristate "GPIO lib-based bitbanged MDIO buses" depends on MDIO_BITBANG && GPIOLIB @@ -298,6 +304,11 @@ config CICADA_PHY ---help--- Currently supports the cis8204 +config CORTINA_PHY + tristate "Cortina EDC CDR 10G Ethernet PHY" + ---help--- + Currently supports the CS4340 phy. + config DAVICOM_PHY tristate "Davicom PHYs" ---help--- --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o +obj-$(CONFIG_MDIO_FSL_BACKPLANE) += fsl_backplane.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o @@ -48,6 +49,7 @@ obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygn obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_CICADA_PHY) += cicada.o +obj-$(CONFIG_CORTINA_PHY) += cortina.o obj-$(CONFIG_DAVICOM_PHY) += davicom.o obj-$(CONFIG_DP83640_PHY) += dp83640.o obj-$(CONFIG_DP83848_PHY) += dp83848.o --- a/drivers/net/phy/aquantia.c +++ b/drivers/net/phy/aquantia.c @@ -21,6 +21,8 @@ #define PHY_ID_AQ1202 0x03a1b445 #define PHY_ID_AQ2104 0x03a1b460 #define PHY_ID_AQR105 0x03a1b4a2 +#define PHY_ID_AQR106 0x03a1b4d0 +#define PHY_ID_AQR107 0x03a1b4e0 #define PHY_ID_AQR405 0x03a1b4b0 #define PHY_AQUANTIA_FEATURES (SUPPORTED_10000baseT_Full | \ @@ -154,6 +156,30 @@ static struct phy_driver aquantia_driver .read_status = aquantia_read_status, }, { + .phy_id = PHY_ID_AQR106, + .phy_id_mask = 0xfffffff0, + .name = "Aquantia AQR106", + .features = PHY_AQUANTIA_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .aneg_done = aquantia_aneg_done, + .config_aneg = aquantia_config_aneg, + .config_intr = aquantia_config_intr, + .ack_interrupt = aquantia_ack_interrupt, + .read_status = aquantia_read_status, +}, +{ + .phy_id = PHY_ID_AQR107, + .phy_id_mask = 0xfffffff0, + .name = "Aquantia AQR107", + .features = PHY_AQUANTIA_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .aneg_done = aquantia_aneg_done, + .config_aneg = aquantia_config_aneg, + .config_intr = aquantia_config_intr, + .ack_interrupt = aquantia_ack_interrupt, + .read_status = aquantia_read_status, +}, +{ .phy_id = PHY_ID_AQR405, .phy_id_mask = 0xfffffff0, .name = "Aquantia AQR405", @@ -173,6 +199,8 @@ static struct mdio_device_id __maybe_unu { PHY_ID_AQ1202, 0xfffffff0 }, { PHY_ID_AQ2104, 0xfffffff0 }, { PHY_ID_AQR105, 0xfffffff0 }, + { PHY_ID_AQR106, 0xfffffff0 }, + { PHY_ID_AQR107, 0xfffffff0 }, { PHY_ID_AQR405, 0xfffffff0 }, { } }; --- /dev/null +++ b/drivers/net/phy/cortina.c @@ -0,0 +1,118 @@ +/* + * Copyright 2017 NXP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * CORTINA is a registered trademark of Cortina Systems, Inc. + * + */ +#include +#include + +#define PHY_ID_CS4340 0x13e51002 + +#define VILLA_GLOBAL_CHIP_ID_LSB 0x0 +#define VILLA_GLOBAL_CHIP_ID_MSB 0x1 + +#define VILLA_GLOBAL_GPIO_1_INTS 0x017 + +static int cortina_read_reg(struct phy_device *phydev, u16 regnum) +{ + return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, + MII_ADDR_C45 | regnum); +} + +static int cortina_config_aneg(struct phy_device *phydev) +{ + phydev->supported = SUPPORTED_10000baseT_Full; + phydev->advertising = SUPPORTED_10000baseT_Full; + + return 0; +} + +static int cortina_read_status(struct phy_device *phydev) +{ + int gpio_int_status, ret = 0; + + gpio_int_status = cortina_read_reg(phydev, VILLA_GLOBAL_GPIO_1_INTS); + if (gpio_int_status < 0) { + ret = gpio_int_status; + goto err; + } + + if (gpio_int_status & 0x8) { + /* up when edc_convergedS set */ + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + phydev->link = 1; + } else { + phydev->link = 0; + } + +err: + return ret; +} + +static int cortina_soft_reset(struct phy_device *phydev) +{ + return 0; +} + +static int cortina_probe(struct phy_device *phydev) +{ + u32 phy_id = 0; + int id_lsb = 0, id_msb = 0; + + /* Read device id from phy registers. */ + id_lsb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_LSB); + if (id_lsb < 0) + return -ENXIO; + + phy_id = id_lsb << 16; + + id_msb = cortina_read_reg(phydev, VILLA_GLOBAL_CHIP_ID_MSB); + if (id_msb < 0) + return -ENXIO; + + phy_id |= id_msb; + + /* Make sure the device tree binding matched the driver with the + * right device. + */ + if (phy_id != phydev->drv->phy_id) { + phydev_err(phydev, "Error matching phy with %s driver\n", + phydev->drv->name); + return -ENODEV; + } + + return 0; +} + +static struct phy_driver cortina_driver[] = { +{ + .phy_id = PHY_ID_CS4340, + .phy_id_mask = 0xffffffff, + .name = "Cortina CS4340", + .config_aneg = cortina_config_aneg, + .read_status = cortina_read_status, + .soft_reset = cortina_soft_reset, + .probe = cortina_probe, +}, +}; + +module_phy_driver(cortina_driver); + +static struct mdio_device_id __maybe_unused cortina_tbl[] = { + { PHY_ID_CS4340, 0xffffffff}, + {}, +}; + +MODULE_DEVICE_TABLE(mdio, cortina_tbl); --- /dev/null +++ b/drivers/net/phy/fsl_backplane.c @@ -0,0 +1,1358 @@ +/* Freescale backplane driver. + * Author: Shaohui Xie + * + * Copyright 2015 Freescale Semiconductor, Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* XFI PCS Device Identifier */ +#define FSL_PCS_PHY_ID 0x0083e400 + +/* Freescale KR PMD registers */ +#define FSL_KR_PMD_CTRL 0x96 +#define FSL_KR_PMD_STATUS 0x97 +#define FSL_KR_LP_CU 0x98 +#define FSL_KR_LP_STATUS 0x99 +#define FSL_KR_LD_CU 0x9a +#define FSL_KR_LD_STATUS 0x9b + +/* Freescale KR PMD defines */ +#define PMD_RESET 0x1 +#define PMD_STATUS_SUP_STAT 0x4 +#define PMD_STATUS_FRAME_LOCK 0x2 +#define TRAIN_EN 0x3 +#define TRAIN_DISABLE 0x1 +#define RX_STAT 0x1 + +#define FSL_KR_RX_LINK_STAT_MASK 0x1000 +#define FSL_XFI_PCS_10GR_SR1 0x20 + +/* Freescale KX PCS mode register */ +#define FSL_PCS_IF_MODE 0x8014 + +/* Freescale KX PCS mode register init value */ +#define IF_MODE_INIT 0x8 + +/* Freescale KX/KR AN registers */ +#define FSL_AN_AD1 0x11 +#define FSL_AN_BP_STAT 0x30 + +/* Freescale KX/KR AN registers defines */ +#define AN_CTRL_INIT 0x1200 +#define KX_AN_AD1_INIT 0x25 +#define KR_AN_AD1_INIT 0x85 +#define AN_LNK_UP_MASK 0x4 +#define KR_AN_MASK 0x8 +#define TRAIN_FAIL 0x8 + +/* C(-1) */ +#define BIN_M1 0 +/* C(1) */ +#define BIN_LONG 1 +#define BIN_M1_SEL 6 +#define BIN_Long_SEL 7 +#define CDR_SEL_MASK 0x00070000 +#define BIN_SNAPSHOT_NUM 5 +#define BIN_M1_THRESHOLD 3 +#define BIN_LONG_THRESHOLD 2 + +#define PRE_COE_SHIFT 22 +#define POST_COE_SHIFT 16 +#define ZERO_COE_SHIFT 8 + +#define PRE_COE_MAX 0x0 +#define PRE_COE_MIN 0x8 +#define POST_COE_MAX 0x0 +#define POST_COE_MIN 0x10 +#define ZERO_COE_MAX 0x30 +#define ZERO_COE_MIN 0x0 + +#define TECR0_INIT 0x24200000 +#define RATIO_PREQ 0x3 +#define RATIO_PST1Q 0xd +#define RATIO_EQ 0x20 + +#define GCR0_RESET_MASK 0x600000 +#define GCR1_SNP_START_MASK 0x00000040 +#define GCR1_CTL_SNP_START_MASK 0x00002000 +#define GCR1_REIDL_TH_MASK 0x00700000 +#define GCR1_REIDL_EX_SEL_MASK 0x000c0000 +#define GCR1_REIDL_ET_MAS_MASK 0x00004000 +#define TECR0_AMP_RED_MASK 0x0000003f + +#define RECR1_CTL_SNP_DONE_MASK 0x00000002 +#define RECR1_SNP_DONE_MASK 0x00000004 +#define TCSR1_SNP_DATA_MASK 0x0000ffc0 +#define TCSR1_SNP_DATA_SHIFT 6 +#define TCSR1_EQ_SNPBIN_SIGN_MASK 0x100 + +#define RECR1_GAINK2_MASK 0x0f000000 +#define RECR1_GAINK2_SHIFT 24 +#define RECR1_GAINK3_MASK 0x000f0000 +#define RECR1_GAINK3_SHIFT 16 +#define RECR1_OFFSET_MASK 0x00003f80 +#define RECR1_OFFSET_SHIFT 7 +#define RECR1_BLW_MASK 0x00000f80 +#define RECR1_BLW_SHIFT 7 +#define EYE_CTRL_SHIFT 12 +#define BASE_WAND_SHIFT 10 + +#define XGKR_TIMEOUT 1050 + +#define INCREMENT 1 +#define DECREMENT 2 +#define TIMEOUT_LONG 3 +#define TIMEOUT_M1 3 + +#define RX_READY_MASK 0x8000 +#define PRESET_MASK 0x2000 +#define INIT_MASK 0x1000 +#define COP1_MASK 0x30 +#define COP1_SHIFT 4 +#define COZ_MASK 0xc +#define COZ_SHIFT 2 +#define COM1_MASK 0x3 +#define COM1_SHIFT 0 +#define REQUEST_MASK 0x3f +#define LD_ALL_MASK (PRESET_MASK | INIT_MASK | \ + COP1_MASK | COZ_MASK | COM1_MASK) + +#define NEW_ALGORITHM_TRAIN_TX +#ifdef NEW_ALGORITHM_TRAIN_TX +#define FORCE_INC_COP1_NUMBER 0 +#define FORCE_INC_COM1_NUMBER 1 +#endif + +#define VAL_INVALID 0xff + +static const u32 preq_table[] = {0x0, 0x1, 0x3, 0x5, + 0x7, 0x9, 0xb, 0xc, VAL_INVALID}; +static const u32 pst1q_table[] = {0x0, 0x1, 0x3, 0x5, 0x7, + 0x9, 0xb, 0xd, 0xf, 0x10, VAL_INVALID}; + +enum backplane_mode { + PHY_BACKPLANE_1000BASE_KX, + PHY_BACKPLANE_10GBASE_KR, + PHY_BACKPLANE_INVAL +}; + +enum coe_filed { + COE_COP1, + COE_COZ, + COE_COM +}; + +enum coe_update { + COE_NOTUPDATED, + COE_UPDATED, + COE_MIN, + COE_MAX, + COE_INV +}; + +enum train_state { + DETECTING_LP, + TRAINED, +}; + +struct per_lane_ctrl_status { + __be32 gcr0; /* 0x.000 - General Control Register 0 */ + __be32 gcr1; /* 0x.004 - General Control Register 1 */ + __be32 gcr2; /* 0x.008 - General Control Register 2 */ + __be32 resv1; /* 0x.00C - Reserved */ + __be32 recr0; /* 0x.010 - Receive Equalization Control Register 0 */ + __be32 recr1; /* 0x.014 - Receive Equalization Control Register 1 */ + __be32 tecr0; /* 0x.018 - Transmit Equalization Control Register 0 */ + __be32 resv2; /* 0x.01C - Reserved */ + __be32 tlcr0; /* 0x.020 - TTL Control Register 0 */ + __be32 tlcr1; /* 0x.024 - TTL Control Register 1 */ + __be32 tlcr2; /* 0x.028 - TTL Control Register 2 */ + __be32 tlcr3; /* 0x.02C - TTL Control Register 3 */ + __be32 tcsr0; /* 0x.030 - Test Control/Status Register 0 */ + __be32 tcsr1; /* 0x.034 - Test Control/Status Register 1 */ + __be32 tcsr2; /* 0x.038 - Test Control/Status Register 2 */ + __be32 tcsr3; /* 0x.03C - Test Control/Status Register 3 */ +}; + +struct tx_condition { + bool bin_m1_late_early; + bool bin_long_late_early; + bool bin_m1_stop; + bool bin_long_stop; + bool tx_complete; + bool sent_init; + int m1_min_max_cnt; + int long_min_max_cnt; +#ifdef NEW_ALGORITHM_TRAIN_TX + int pre_inc; + int post_inc; +#endif +}; + +struct fsl_xgkr_inst { + void *reg_base; + struct phy_device *phydev; + struct tx_condition tx_c; + struct delayed_work xgkr_wk; + enum train_state state; + u32 ld_update; + u32 ld_status; + u32 ratio_preq; + u32 ratio_pst1q; + u32 adpt_eq; +}; + +static void tx_condition_init(struct tx_condition *tx_c) +{ + tx_c->bin_m1_late_early = true; + tx_c->bin_long_late_early = false; + tx_c->bin_m1_stop = false; + tx_c->bin_long_stop = false; + tx_c->tx_complete = false; + tx_c->sent_init = false; + tx_c->m1_min_max_cnt = 0; + tx_c->long_min_max_cnt = 0; +#ifdef NEW_ALGORITHM_TRAIN_TX + tx_c->pre_inc = FORCE_INC_COM1_NUMBER; + tx_c->post_inc = FORCE_INC_COP1_NUMBER; +#endif +} + +void tune_tecr0(struct fsl_xgkr_inst *inst) +{ + struct per_lane_ctrl_status *reg_base = inst->reg_base; + u32 val; + + val = TECR0_INIT | + inst->adpt_eq << ZERO_COE_SHIFT | + inst->ratio_preq << PRE_COE_SHIFT | + inst->ratio_pst1q << POST_COE_SHIFT; + + /* reset the lane */ + iowrite32(ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); + iowrite32(val, ®_base->tecr0); + udelay(1); + /* unreset the lane */ + iowrite32(ioread32(®_base->gcr0) | GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); +} + +static void start_lt(struct phy_device *phydev) +{ + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_PMD_CTRL, TRAIN_EN); +} + +static void stop_lt(struct phy_device *phydev) +{ + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_PMD_CTRL, TRAIN_DISABLE); +} + +static void reset_gcr0(struct fsl_xgkr_inst *inst) +{ + struct per_lane_ctrl_status *reg_base = inst->reg_base; + + iowrite32(ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); + iowrite32(ioread32(®_base->gcr0) | GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); +} + +void lane_set_1gkx(void *reg) +{ + struct per_lane_ctrl_status *reg_base = reg; + u32 val; + + /* reset the lane */ + iowrite32(ioread32(®_base->gcr0) & ~GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); + + /* set gcr1 for 1GKX */ + val = ioread32(®_base->gcr1); + val &= ~(GCR1_REIDL_TH_MASK | GCR1_REIDL_EX_SEL_MASK | + GCR1_REIDL_ET_MAS_MASK); + iowrite32(val, ®_base->gcr1); + udelay(1); + + /* set tecr0 for 1GKX */ + val = ioread32(®_base->tecr0); + val &= ~TECR0_AMP_RED_MASK; + iowrite32(val, ®_base->tecr0); + udelay(1); + + /* unreset the lane */ + iowrite32(ioread32(®_base->gcr0) | GCR0_RESET_MASK, + ®_base->gcr0); + udelay(1); +} + +static void reset_lt(struct phy_device *phydev) +{ + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1, PMD_RESET); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_PMD_CTRL, TRAIN_DISABLE); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LD_CU, 0); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LD_STATUS, 0); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_PMD_STATUS, 0); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LP_CU, 0); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LP_STATUS, 0); +} + +static void start_xgkr_state_machine(struct delayed_work *work) +{ + queue_delayed_work(system_power_efficient_wq, work, + msecs_to_jiffies(XGKR_TIMEOUT)); +} + +static void start_xgkr_an(struct phy_device *phydev) +{ + struct fsl_xgkr_inst *inst; + + reset_lt(phydev); + phy_write_mmd(phydev, MDIO_MMD_AN, FSL_AN_AD1, KR_AN_AD1_INIT); + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, AN_CTRL_INIT); + + inst = phydev->priv; + + /* start state machine*/ + start_xgkr_state_machine(&inst->xgkr_wk); +} + +static void start_1gkx_an(struct phy_device *phydev) +{ + phy_write_mmd(phydev, MDIO_MMD_PCS, FSL_PCS_IF_MODE, IF_MODE_INIT); + phy_write_mmd(phydev, MDIO_MMD_AN, FSL_AN_AD1, KX_AN_AD1_INIT); + phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, AN_CTRL_INIT); +} + +static void ld_coe_status(struct fsl_xgkr_inst *inst) +{ + phy_write_mmd(inst->phydev, MDIO_MMD_PMAPMD, + FSL_KR_LD_STATUS, inst->ld_status); +} + +static void ld_coe_update(struct fsl_xgkr_inst *inst) +{ + dev_dbg(&inst->phydev->mdio.dev, "sending request: %x\n", inst->ld_update); + phy_write_mmd(inst->phydev, MDIO_MMD_PMAPMD, + FSL_KR_LD_CU, inst->ld_update); +} + +static void init_inst(struct fsl_xgkr_inst *inst, int reset) +{ + if (reset) { + inst->ratio_preq = RATIO_PREQ; + inst->ratio_pst1q = RATIO_PST1Q; + inst->adpt_eq = RATIO_EQ; + tune_tecr0(inst); + } + + tx_condition_init(&inst->tx_c); + inst->state = DETECTING_LP; + inst->ld_status &= RX_READY_MASK; + ld_coe_status(inst); + inst->ld_update = 0; + inst->ld_status &= ~RX_READY_MASK; + ld_coe_status(inst); +} + +#ifdef NEW_ALGORITHM_TRAIN_TX +static int get_median_gaink2(u32 *reg) +{ + int gaink2_snap_shot[BIN_SNAPSHOT_NUM]; + u32 rx_eq_snp; + struct per_lane_ctrl_status *reg_base; + int timeout; + int i, j, tmp, pos; + + reg_base = (struct per_lane_ctrl_status *)reg; + + for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { + /* wait RECR1_CTL_SNP_DONE_MASK has cleared */ + timeout = 100; + while (ioread32(®_base->recr1) & + RECR1_CTL_SNP_DONE_MASK) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* start snap shot */ + iowrite32((ioread32(®_base->gcr1) | + GCR1_CTL_SNP_START_MASK), + ®_base->gcr1); + + /* wait for SNP done */ + timeout = 100; + while (!(ioread32(®_base->recr1) & + RECR1_CTL_SNP_DONE_MASK)) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* read and save the snap shot */ + rx_eq_snp = ioread32(®_base->recr1); + gaink2_snap_shot[i] = (rx_eq_snp & RECR1_GAINK2_MASK) >> + RECR1_GAINK2_SHIFT; + + /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ + iowrite32((ioread32(®_base->gcr1) & + ~GCR1_CTL_SNP_START_MASK), + ®_base->gcr1); + } + + /* get median of the 5 snap shot */ + for (i = 0; i < BIN_SNAPSHOT_NUM - 1; i++) { + tmp = gaink2_snap_shot[i]; + pos = i; + for (j = i + 1; j < BIN_SNAPSHOT_NUM; j++) { + if (gaink2_snap_shot[j] < tmp) { + tmp = gaink2_snap_shot[j]; + pos = j; + } + } + + gaink2_snap_shot[pos] = gaink2_snap_shot[i]; + gaink2_snap_shot[i] = tmp; + } + + return gaink2_snap_shot[2]; +} +#endif + +static bool is_bin_early(int bin_sel, void *reg) +{ + bool early = false; + int bin_snap_shot[BIN_SNAPSHOT_NUM]; + int i, negative_count = 0; + struct per_lane_ctrl_status *reg_base = reg; + int timeout; + + for (i = 0; i < BIN_SNAPSHOT_NUM; i++) { + /* wait RECR1_SNP_DONE_MASK has cleared */ + timeout = 100; + while ((ioread32(®_base->recr1) & RECR1_SNP_DONE_MASK)) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* set TCSR1[CDR_SEL] to BinM1/BinLong */ + if (bin_sel == BIN_M1) { + iowrite32((ioread32(®_base->tcsr1) & + ~CDR_SEL_MASK) | BIN_M1_SEL, + ®_base->tcsr1); + } else { + iowrite32((ioread32(®_base->tcsr1) & + ~CDR_SEL_MASK) | BIN_Long_SEL, + ®_base->tcsr1); + } + + /* start snap shot */ + iowrite32(ioread32(®_base->gcr1) | GCR1_SNP_START_MASK, + ®_base->gcr1); + + /* wait for SNP done */ + timeout = 100; + while (!(ioread32(®_base->recr1) & RECR1_SNP_DONE_MASK)) { + udelay(1); + timeout--; + if (timeout == 0) + break; + } + + /* read and save the snap shot */ + bin_snap_shot[i] = (ioread32(®_base->tcsr1) & + TCSR1_SNP_DATA_MASK) >> TCSR1_SNP_DATA_SHIFT; + if (bin_snap_shot[i] & TCSR1_EQ_SNPBIN_SIGN_MASK) + negative_count++; + + /* terminate the snap shot by setting GCR1[REQ_CTL_SNP] */ + iowrite32(ioread32(®_base->gcr1) & ~GCR1_SNP_START_MASK, + ®_base->gcr1); + } + + if (((bin_sel == BIN_M1) && (negative_count > BIN_M1_THRESHOLD)) || + ((bin_sel == BIN_LONG && (negative_count > BIN_LONG_THRESHOLD)))) { + early = true; + } + + return early; +} + +static void train_tx(struct fsl_xgkr_inst *inst) +{ + struct phy_device *phydev = inst->phydev; + struct tx_condition *tx_c = &inst->tx_c; + bool bin_m1_early, bin_long_early; + u32 lp_status, old_ld_update; + u32 status_cop1, status_coz, status_com1; + u32 req_cop1, req_coz, req_com1, req_preset, req_init; + u32 temp; +#ifdef NEW_ALGORITHM_TRAIN_TX + u32 median_gaink2; +#endif + +recheck: + if (tx_c->bin_long_stop && tx_c->bin_m1_stop) { + tx_c->tx_complete = true; + inst->ld_status |= RX_READY_MASK; + ld_coe_status(inst); + /* tell LP we are ready */ + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, + FSL_KR_PMD_STATUS, RX_STAT); + return; + } + + /* We start by checking the current LP status. If we got any responses, + * we can clear up the appropriate update request so that the + * subsequent code may easily issue new update requests if needed. + */ + lp_status = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LP_STATUS) & + REQUEST_MASK; + status_cop1 = (lp_status & COP1_MASK) >> COP1_SHIFT; + status_coz = (lp_status & COZ_MASK) >> COZ_SHIFT; + status_com1 = (lp_status & COM1_MASK) >> COM1_SHIFT; + + old_ld_update = inst->ld_update; + req_cop1 = (old_ld_update & COP1_MASK) >> COP1_SHIFT; + req_coz = (old_ld_update & COZ_MASK) >> COZ_SHIFT; + req_com1 = (old_ld_update & COM1_MASK) >> COM1_SHIFT; + req_preset = old_ld_update & PRESET_MASK; + req_init = old_ld_update & INIT_MASK; + + /* IEEE802.3-2008, 72.6.10.2.3.1 + * We may clear PRESET when all coefficients show UPDATED or MAX. + */ + if (req_preset) { + if ((status_cop1 == COE_UPDATED || status_cop1 == COE_MAX) && + (status_coz == COE_UPDATED || status_coz == COE_MAX) && + (status_com1 == COE_UPDATED || status_com1 == COE_MAX)) { + inst->ld_update &= ~PRESET_MASK; + } + } + + /* IEEE802.3-2008, 72.6.10.2.3.2 + * We may clear INITIALIZE when no coefficients show NOT UPDATED. + */ + if (req_init) { + if (status_cop1 != COE_NOTUPDATED && + status_coz != COE_NOTUPDATED && + status_com1 != COE_NOTUPDATED) { + inst->ld_update &= ~INIT_MASK; + } + } + + /* IEEE802.3-2008, 72.6.10.2.3.2 + * we send initialize to the other side to ensure default settings + * for the LP. Naturally, we should do this only once. + */ + if (!tx_c->sent_init) { + if (!lp_status && !(old_ld_update & (LD_ALL_MASK))) { + inst->ld_update = INIT_MASK; + tx_c->sent_init = true; + } + } + + /* IEEE802.3-2008, 72.6.10.2.3.3 + * We set coefficient requests to HOLD when we get the information + * about any updates On clearing our prior response, we also update + * our internal status. + */ + if (status_cop1 != COE_NOTUPDATED) { + if (req_cop1) { + inst->ld_update &= ~COP1_MASK; +#ifdef NEW_ALGORITHM_TRAIN_TX + if (tx_c->post_inc) { + if (req_cop1 == INCREMENT && + status_cop1 == COE_MAX) { + tx_c->post_inc = 0; + tx_c->bin_long_stop = true; + tx_c->bin_m1_stop = true; + } else { + tx_c->post_inc -= 1; + } + + ld_coe_update(inst); + goto recheck; + } +#endif + if ((req_cop1 == DECREMENT && status_cop1 == COE_MIN) || + (req_cop1 == INCREMENT && status_cop1 == COE_MAX)) { + dev_dbg(&inst->phydev->mdio.dev, "COP1 hit limit %s", + (status_cop1 == COE_MIN) ? + "DEC MIN" : "INC MAX"); + tx_c->long_min_max_cnt++; + if (tx_c->long_min_max_cnt >= TIMEOUT_LONG) { + tx_c->bin_long_stop = true; + ld_coe_update(inst); + goto recheck; + } + } + } + } + + if (status_coz != COE_NOTUPDATED) { + if (req_coz) + inst->ld_update &= ~COZ_MASK; + } + + if (status_com1 != COE_NOTUPDATED) { + if (req_com1) { + inst->ld_update &= ~COM1_MASK; +#ifdef NEW_ALGORITHM_TRAIN_TX + if (tx_c->pre_inc) { + if (req_com1 == INCREMENT && + status_com1 == COE_MAX) + tx_c->pre_inc = 0; + else + tx_c->pre_inc -= 1; + + ld_coe_update(inst); + goto recheck; + } +#endif + /* Stop If we have reached the limit for a parameter. */ + if ((req_com1 == DECREMENT && status_com1 == COE_MIN) || + (req_com1 == INCREMENT && status_com1 == COE_MAX)) { + dev_dbg(&inst->phydev->mdio.dev, "COM1 hit limit %s", + (status_com1 == COE_MIN) ? + "DEC MIN" : "INC MAX"); + tx_c->m1_min_max_cnt++; + if (tx_c->m1_min_max_cnt >= TIMEOUT_M1) { + tx_c->bin_m1_stop = true; + ld_coe_update(inst); + goto recheck; + } + } + } + } + + if (old_ld_update != inst->ld_update) { + ld_coe_update(inst); + /* Redo these status checks and updates until we have no more + * changes, to speed up the overall process. + */ + goto recheck; + } + + /* Do nothing if we have pending request. */ + if ((req_coz || req_com1 || req_cop1)) + return; + else if (lp_status) + /* No pending request but LP status was not reverted to + * not updated. + */ + return; + +#ifdef NEW_ALGORITHM_TRAIN_TX + if (!(inst->ld_update & (PRESET_MASK | INIT_MASK))) { + if (tx_c->pre_inc) { + inst->ld_update = INCREMENT << COM1_SHIFT; + ld_coe_update(inst); + return; + } + + if (status_cop1 != COE_MAX) { + median_gaink2 = get_median_gaink2(inst->reg_base); + if (median_gaink2 == 0xf) { + tx_c->post_inc = 1; + } else { + /* Gaink2 median lower than "F" */ + tx_c->bin_m1_stop = true; + tx_c->bin_long_stop = true; + goto recheck; + } + } else { + /* C1 MAX */ + tx_c->bin_m1_stop = true; + tx_c->bin_long_stop = true; + goto recheck; + } + + if (tx_c->post_inc) { + inst->ld_update = INCREMENT << COP1_SHIFT; + ld_coe_update(inst); + return; + } + } +#endif + + /* snapshot and select bin */ + bin_m1_early = is_bin_early(BIN_M1, inst->reg_base); + bin_long_early = is_bin_early(BIN_LONG, inst->reg_base); + + if (!tx_c->bin_m1_stop && !tx_c->bin_m1_late_early && bin_m1_early) { + tx_c->bin_m1_stop = true; + goto recheck; + } + + if (!tx_c->bin_long_stop && + tx_c->bin_long_late_early && !bin_long_early) { + tx_c->bin_long_stop = true; + goto recheck; + } + + /* IEEE802.3-2008, 72.6.10.2.3.3 + * We only request coefficient updates when no PRESET/INITIALIZE is + * pending. We also only request coefficient updates when the + * corresponding status is NOT UPDATED and nothing is pending. + */ + if (!(inst->ld_update & (PRESET_MASK | INIT_MASK))) { + if (!tx_c->bin_long_stop) { + /* BinM1 correction means changing COM1 */ + if (!status_com1 && !(inst->ld_update & COM1_MASK)) { + /* Avoid BinM1Late by requesting an + * immediate decrement. + */ + if (!bin_m1_early) { + /* request decrement c(-1) */ + temp = DECREMENT << COM1_SHIFT; + inst->ld_update = temp; + ld_coe_update(inst); + tx_c->bin_m1_late_early = bin_m1_early; + return; + } + } + + /* BinLong correction means changing COP1 */ + if (!status_cop1 && !(inst->ld_update & COP1_MASK)) { + /* Locate BinLong transition point (if any) + * while avoiding BinM1Late. + */ + if (bin_long_early) { + /* request increment c(1) */ + temp = INCREMENT << COP1_SHIFT; + inst->ld_update = temp; + } else { + /* request decrement c(1) */ + temp = DECREMENT << COP1_SHIFT; + inst->ld_update = temp; + } + + ld_coe_update(inst); + tx_c->bin_long_late_early = bin_long_early; + } + /* We try to finish BinLong before we do BinM1 */ + return; + } + + if (!tx_c->bin_m1_stop) { + /* BinM1 correction means changing COM1 */ + if (!status_com1 && !(inst->ld_update & COM1_MASK)) { + /* Locate BinM1 transition point (if any) */ + if (bin_m1_early) { + /* request increment c(-1) */ + temp = INCREMENT << COM1_SHIFT; + inst->ld_update = temp; + } else { + /* request decrement c(-1) */ + temp = DECREMENT << COM1_SHIFT; + inst->ld_update = temp; + } + + ld_coe_update(inst); + tx_c->bin_m1_late_early = bin_m1_early; + } + } + } +} + +static int is_link_up(struct phy_device *phydev) +{ + int val; + + phy_read_mmd(phydev, MDIO_MMD_PCS, FSL_XFI_PCS_10GR_SR1); + val = phy_read_mmd(phydev, MDIO_MMD_PCS, FSL_XFI_PCS_10GR_SR1); + + return (val & FSL_KR_RX_LINK_STAT_MASK) ? 1 : 0; +} + +static int is_link_training_fail(struct phy_device *phydev) +{ + int val; + int timeout = 100; + + val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_PMD_STATUS); + if (!(val & TRAIN_FAIL) && (val & RX_STAT)) { + /* check LNK_STAT for sure */ + while (timeout--) { + if (is_link_up(phydev)) + return 0; + + usleep_range(100, 500); + } + } + + return 1; +} + +static int check_rx(struct phy_device *phydev) +{ + return phy_read_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LP_STATUS) & + RX_READY_MASK; +} + +/* Coefficient values have hardware restrictions */ +static int is_ld_valid(struct fsl_xgkr_inst *inst) +{ + u32 ratio_pst1q = inst->ratio_pst1q; + u32 adpt_eq = inst->adpt_eq; + u32 ratio_preq = inst->ratio_preq; + + if ((ratio_pst1q + adpt_eq + ratio_preq) > 48) + return 0; + + if (((ratio_pst1q + adpt_eq + ratio_preq) * 4) >= + ((adpt_eq - ratio_pst1q - ratio_preq) * 17)) + return 0; + + if (ratio_preq > ratio_pst1q) + return 0; + + if (ratio_preq > 8) + return 0; + + if (adpt_eq < 26) + return 0; + + if (ratio_pst1q > 16) + return 0; + + return 1; +} + +static int is_value_allowed(const u32 *val_table, u32 val) +{ + int i; + + for (i = 0;; i++) { + if (*(val_table + i) == VAL_INVALID) + return 0; + if (*(val_table + i) == val) + return 1; + } +} + +static int inc_dec(struct fsl_xgkr_inst *inst, int field, int request) +{ + u32 ld_limit[3], ld_coe[3], step[3]; + + ld_coe[0] = inst->ratio_pst1q; + ld_coe[1] = inst->adpt_eq; + ld_coe[2] = inst->ratio_preq; + + /* Information specific to the Freescale SerDes for 10GBase-KR: + * Incrementing C(+1) means *decrementing* RATIO_PST1Q + * Incrementing C(0) means incrementing ADPT_EQ + * Incrementing C(-1) means *decrementing* RATIO_PREQ + */ + step[0] = -1; + step[1] = 1; + step[2] = -1; + + switch (request) { + case INCREMENT: + ld_limit[0] = POST_COE_MAX; + ld_limit[1] = ZERO_COE_MAX; + ld_limit[2] = PRE_COE_MAX; + if (ld_coe[field] != ld_limit[field]) + ld_coe[field] += step[field]; + else + /* MAX */ + return 2; + break; + case DECREMENT: + ld_limit[0] = POST_COE_MIN; + ld_limit[1] = ZERO_COE_MIN; + ld_limit[2] = PRE_COE_MIN; + if (ld_coe[field] != ld_limit[field]) + ld_coe[field] -= step[field]; + else + /* MIN */ + return 1; + break; + default: + break; + } + + if (is_ld_valid(inst)) { + /* accept new ld */ + inst->ratio_pst1q = ld_coe[0]; + inst->adpt_eq = ld_coe[1]; + inst->ratio_preq = ld_coe[2]; + /* only some values for preq and pst1q can be used. + * for preq: 0x0, 0x1, 0x3, 0x5, 0x7, 0x9, 0xb, 0xc. + * for pst1q: 0x0, 0x1, 0x3, 0x5, 0x7, 0x9, 0xb, 0xd, 0xf, 0x10. + */ + if (!is_value_allowed((const u32 *)&preq_table, ld_coe[2])) { + dev_dbg(&inst->phydev->mdio.dev, + "preq skipped value: %d\n", ld_coe[2]); + return 0; + } + + if (!is_value_allowed((const u32 *)&pst1q_table, ld_coe[0])) { + dev_dbg(&inst->phydev->mdio.dev, + "pst1q skipped value: %d\n", ld_coe[0]); + return 0; + } + + tune_tecr0(inst); + } else { + if (request == DECREMENT) + /* MIN */ + return 1; + if (request == INCREMENT) + /* MAX */ + return 2; + } + + return 0; +} + +static void min_max_updated(struct fsl_xgkr_inst *inst, int field, int new_ld) +{ + u32 ld_coe[] = {COE_UPDATED, COE_MIN, COE_MAX}; + u32 mask, val; + + switch (field) { + case COE_COP1: + mask = COP1_MASK; + val = ld_coe[new_ld] << COP1_SHIFT; + break; + case COE_COZ: + mask = COZ_MASK; + val = ld_coe[new_ld] << COZ_SHIFT; + break; + case COE_COM: + mask = COM1_MASK; + val = ld_coe[new_ld] << COM1_SHIFT; + break; + default: + return; + } + + inst->ld_status &= ~mask; + inst->ld_status |= val; +} + +static void check_request(struct fsl_xgkr_inst *inst, int request) +{ + int cop1_req, coz_req, com_req; + int old_status, new_ld_sta; + + cop1_req = (request & COP1_MASK) >> COP1_SHIFT; + coz_req = (request & COZ_MASK) >> COZ_SHIFT; + com_req = (request & COM1_MASK) >> COM1_SHIFT; + + /* IEEE802.3-2008, 72.6.10.2.5 + * Ensure we only act on INCREMENT/DECREMENT when we are in NOT UPDATED + */ + old_status = inst->ld_status; + + if (cop1_req && !(inst->ld_status & COP1_MASK)) { + new_ld_sta = inc_dec(inst, COE_COP1, cop1_req); + min_max_updated(inst, COE_COP1, new_ld_sta); + } + + if (coz_req && !(inst->ld_status & COZ_MASK)) { + new_ld_sta = inc_dec(inst, COE_COZ, coz_req); + min_max_updated(inst, COE_COZ, new_ld_sta); + } + + if (com_req && !(inst->ld_status & COM1_MASK)) { + new_ld_sta = inc_dec(inst, COE_COM, com_req); + min_max_updated(inst, COE_COM, new_ld_sta); + } + + if (old_status != inst->ld_status) + ld_coe_status(inst); +} + +static void preset(struct fsl_xgkr_inst *inst) +{ + /* These are all MAX values from the IEEE802.3 perspective. */ + inst->ratio_pst1q = POST_COE_MAX; + inst->adpt_eq = ZERO_COE_MAX; + inst->ratio_preq = PRE_COE_MAX; + + tune_tecr0(inst); + inst->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); + inst->ld_status |= COE_MAX << COP1_SHIFT | + COE_MAX << COZ_SHIFT | + COE_MAX << COM1_SHIFT; + ld_coe_status(inst); +} + +static void initialize(struct fsl_xgkr_inst *inst) +{ + inst->ratio_preq = RATIO_PREQ; + inst->ratio_pst1q = RATIO_PST1Q; + inst->adpt_eq = RATIO_EQ; + + tune_tecr0(inst); + inst->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); + inst->ld_status |= COE_UPDATED << COP1_SHIFT | + COE_UPDATED << COZ_SHIFT | + COE_UPDATED << COM1_SHIFT; + ld_coe_status(inst); +} + +static void train_rx(struct fsl_xgkr_inst *inst) +{ + struct phy_device *phydev = inst->phydev; + int request, old_ld_status; + + /* get request from LP */ + request = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, FSL_KR_LP_CU) & + (LD_ALL_MASK); + old_ld_status = inst->ld_status; + + /* IEEE802.3-2008, 72.6.10.2.5 + * Ensure we always go to NOT UDPATED for status reporting in + * response to HOLD requests. + * IEEE802.3-2008, 72.6.10.2.3.1/2 + * ... but only if PRESET/INITIALIZE are not active to ensure + * we keep status until they are released. + */ + if (!(request & (PRESET_MASK | INIT_MASK))) { + if (!(request & COP1_MASK)) + inst->ld_status &= ~COP1_MASK; + + if (!(request & COZ_MASK)) + inst->ld_status &= ~COZ_MASK; + + if (!(request & COM1_MASK)) + inst->ld_status &= ~COM1_MASK; + + if (old_ld_status != inst->ld_status) + ld_coe_status(inst); + } + + /* As soon as the LP shows ready, no need to do any more updates. */ + if (check_rx(phydev)) { + /* LP receiver is ready */ + if (inst->ld_status & (COP1_MASK | COZ_MASK | COM1_MASK)) { + inst->ld_status &= ~(COP1_MASK | COZ_MASK | COM1_MASK); + ld_coe_status(inst); + } + } else { + /* IEEE802.3-2008, 72.6.10.2.3.1/2 + * only act on PRESET/INITIALIZE if all status is NOT UPDATED. + */ + if (request & (PRESET_MASK | INIT_MASK)) { + if (!(inst->ld_status & + (COP1_MASK | COZ_MASK | COM1_MASK))) { + if (request & PRESET_MASK) + preset(inst); + + if (request & INIT_MASK) + initialize(inst); + } + } + + /* LP Coefficient are not in HOLD */ + if (request & REQUEST_MASK) + check_request(inst, request & REQUEST_MASK); + } +} + +static void xgkr_start_train(struct phy_device *phydev) +{ + struct fsl_xgkr_inst *inst = phydev->priv; + struct tx_condition *tx_c = &inst->tx_c; + int val = 0, i; + int lt_state; + unsigned long dead_line; + int rx_ok, tx_ok; + + init_inst(inst, 0); + start_lt(phydev); + + for (i = 0; i < 2;) { + dead_line = jiffies + msecs_to_jiffies(500); + while (time_before(jiffies, dead_line)) { + val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, + FSL_KR_PMD_STATUS); + if (val & TRAIN_FAIL) { + /* LT failed already, reset lane to avoid + * it run into hanging, then start LT again. + */ + reset_gcr0(inst); + start_lt(phydev); + } else if ((val & PMD_STATUS_SUP_STAT) && + (val & PMD_STATUS_FRAME_LOCK)) + break; + usleep_range(100, 500); + } + + if (!((val & PMD_STATUS_FRAME_LOCK) && + (val & PMD_STATUS_SUP_STAT))) { + i++; + continue; + } + + /* init process */ + rx_ok = false; + tx_ok = false; + /* the LT should be finished in 500ms, failed or OK. */ + dead_line = jiffies + msecs_to_jiffies(500); + + while (time_before(jiffies, dead_line)) { + /* check if the LT is already failed */ + lt_state = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, + FSL_KR_PMD_STATUS); + if (lt_state & TRAIN_FAIL) { + reset_gcr0(inst); + break; + } + + rx_ok = check_rx(phydev); + tx_ok = tx_c->tx_complete; + + if (rx_ok && tx_ok) + break; + + if (!rx_ok) + train_rx(inst); + + if (!tx_ok) + train_tx(inst); + + usleep_range(100, 500); + } + + i++; + /* check LT result */ + if (is_link_training_fail(phydev)) { + init_inst(inst, 0); + continue; + } else { + stop_lt(phydev); + inst->state = TRAINED; + break; + } + } +} + +static void xgkr_state_machine(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct fsl_xgkr_inst *inst = container_of(dwork, + struct fsl_xgkr_inst, + xgkr_wk); + struct phy_device *phydev = inst->phydev; + int an_state; + bool needs_train = false; + + mutex_lock(&phydev->lock); + + switch (inst->state) { + case DETECTING_LP: + phy_read_mmd(phydev, MDIO_MMD_AN, FSL_AN_BP_STAT); + an_state = phy_read_mmd(phydev, MDIO_MMD_AN, FSL_AN_BP_STAT); + if ((an_state & KR_AN_MASK)) + needs_train = true; + break; + case TRAINED: + if (!is_link_up(phydev)) { + dev_info(&phydev->mdio.dev, + "Detect hotplug, restart training\n"); + init_inst(inst, 1); + start_xgkr_an(phydev); + inst->state = DETECTING_LP; + } + break; + } + + if (needs_train) + xgkr_start_train(phydev); + + mutex_unlock(&phydev->lock); + queue_delayed_work(system_power_efficient_wq, &inst->xgkr_wk, + msecs_to_jiffies(XGKR_TIMEOUT)); +} + +static int fsl_backplane_probe(struct phy_device *phydev) +{ + struct fsl_xgkr_inst *xgkr_inst; + struct device_node *phy_node, *lane_node; + struct resource res_lane; + const char *bm; + int ret; + int bp_mode; + u32 lane[2]; + + phy_node = phydev->mdio.dev.of_node; + bp_mode = of_property_read_string(phy_node, "backplane-mode", &bm); + if (bp_mode < 0) + return 0; + + if (!strcasecmp(bm, "1000base-kx")) { + bp_mode = PHY_BACKPLANE_1000BASE_KX; + } else if (!strcasecmp(bm, "10gbase-kr")) { + bp_mode = PHY_BACKPLANE_10GBASE_KR; + } else { + dev_err(&phydev->mdio.dev, "Unknown backplane-mode\n"); + return -EINVAL; + } + + lane_node = of_parse_phandle(phy_node, "fsl,lane-handle", 0); + if (!lane_node) { + dev_err(&phydev->mdio.dev, "parse fsl,lane-handle failed\n"); + return -EINVAL; + } + + ret = of_address_to_resource(lane_node, 0, &res_lane); + if (ret) { + dev_err(&phydev->mdio.dev, "could not obtain memory map\n"); + return ret; + } + + of_node_put(lane_node); + ret = of_property_read_u32_array(phy_node, "fsl,lane-reg", + (u32 *)&lane, 2); + if (ret) { + dev_err(&phydev->mdio.dev, "could not get fsl,lane-reg\n"); + return -EINVAL; + } + + phydev->priv = devm_ioremap_nocache(&phydev->mdio.dev, + res_lane.start + lane[0], + lane[1]); + if (!phydev->priv) { + dev_err(&phydev->mdio.dev, "ioremap_nocache failed\n"); + return -ENOMEM; + } + + if (bp_mode == PHY_BACKPLANE_1000BASE_KX) { + phydev->speed = SPEED_1000; + /* configure the lane for 1000BASE-KX */ + lane_set_1gkx(phydev->priv); + return 0; + } + + xgkr_inst = devm_kzalloc(&phydev->mdio.dev, + sizeof(*xgkr_inst), GFP_KERNEL); + if (!xgkr_inst) + return -ENOMEM; + + xgkr_inst->reg_base = phydev->priv; + xgkr_inst->phydev = phydev; + phydev->priv = xgkr_inst; + + if (bp_mode == PHY_BACKPLANE_10GBASE_KR) { + phydev->speed = SPEED_10000; + INIT_DELAYED_WORK(&xgkr_inst->xgkr_wk, xgkr_state_machine); + } + + return 0; +} + +static int fsl_backplane_aneg_done(struct phy_device *phydev) +{ + return 1; +} + +static int fsl_backplane_config_aneg(struct phy_device *phydev) +{ + if (phydev->speed == SPEED_10000) { + phydev->supported |= SUPPORTED_10000baseKR_Full; + start_xgkr_an(phydev); + } else if (phydev->speed == SPEED_1000) { + phydev->supported |= SUPPORTED_1000baseKX_Full; + start_1gkx_an(phydev); + } + + phydev->advertising = phydev->supported; + phydev->duplex = 1; + + return 0; +} + +static int fsl_backplane_suspend(struct phy_device *phydev) +{ + if (phydev->speed == SPEED_10000) { + struct fsl_xgkr_inst *xgkr_inst = phydev->priv; + + cancel_delayed_work_sync(&xgkr_inst->xgkr_wk); + } + return 0; +} + +static int fsl_backplane_resume(struct phy_device *phydev) +{ + if (phydev->speed == SPEED_10000) { + struct fsl_xgkr_inst *xgkr_inst = phydev->priv; + + init_inst(xgkr_inst, 1); + queue_delayed_work(system_power_efficient_wq, + &xgkr_inst->xgkr_wk, + msecs_to_jiffies(XGKR_TIMEOUT)); + } + return 0; +} + +static int fsl_backplane_read_status(struct phy_device *phydev) +{ + if (is_link_up(phydev)) + phydev->link = 1; + else + phydev->link = 0; + + return 0; +} + +static struct phy_driver fsl_backplane_driver[] = { + { + .phy_id = FSL_PCS_PHY_ID, + .name = "Freescale Backplane", + .phy_id_mask = 0xffffffff, + .features = SUPPORTED_Backplane | SUPPORTED_Autoneg | + SUPPORTED_MII, + .probe = fsl_backplane_probe, + .aneg_done = fsl_backplane_aneg_done, + .config_aneg = fsl_backplane_config_aneg, + .read_status = fsl_backplane_read_status, + .suspend = fsl_backplane_suspend, + .resume = fsl_backplane_resume, + }, +}; + +module_phy_driver(fsl_backplane_driver); + +static struct mdio_device_id __maybe_unused freescale_tbl[] = { + { FSL_PCS_PHY_ID, 0xffffffff }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, freescale_tbl); + +MODULE_DESCRIPTION("Freescale Backplane driver"); +MODULE_AUTHOR("Shaohui Xie "); +MODULE_LICENSE("GPL v2"); --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -592,7 +592,7 @@ int phy_mii_ioctl(struct phy_device *phy return 0; case SIOCSHWTSTAMP: - if (phydev->drv->hwtstamp) + if (phydev->drv && phydev->drv->hwtstamp) return phydev->drv->hwtstamp(phydev, ifr); /* fall through */ @@ -617,6 +617,9 @@ static int phy_start_aneg_priv(struct ph bool trigger = 0; int err; + if (!phydev->drv) + return -EIO; + mutex_lock(&phydev->lock); if (AUTONEG_DISABLE == phydev->autoneg) @@ -1016,7 +1019,7 @@ void phy_state_machine(struct work_struc old_state = phydev->state; - if (phydev->drv->link_change_notify) + if (phydev->drv && phydev->drv->link_change_notify) phydev->drv->link_change_notify(phydev); switch (phydev->state) { @@ -1318,6 +1321,9 @@ EXPORT_SYMBOL(phy_write_mmd_indirect); */ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) { + if (!phydev->drv) + return -EIO; + /* According to 802.3az,the EEE is supported only in full duplex-mode. * Also EEE feature is active when core is operating with MII, GMII * or RGMII (all kinds). Internal PHYs are also allowed to proceed and @@ -1395,6 +1401,9 @@ EXPORT_SYMBOL(phy_init_eee); */ int phy_get_eee_err(struct phy_device *phydev) { + if (!phydev->drv) + return -EIO; + return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR, MDIO_MMD_PCS); } EXPORT_SYMBOL(phy_get_eee_err); @@ -1411,6 +1420,9 @@ int phy_ethtool_get_eee(struct phy_devic { int val; + if (!phydev->drv) + return -EIO; + /* Get Supported EEE */ val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE, MDIO_MMD_PCS); if (val < 0) @@ -1444,6 +1456,9 @@ int phy_ethtool_set_eee(struct phy_devic { int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised); + if (!phydev->drv) + return -EIO; + /* Mask prohibited EEE modes */ val &= ~phydev->eee_broken_modes; @@ -1455,7 +1470,7 @@ EXPORT_SYMBOL(phy_ethtool_set_eee); int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { - if (phydev->drv->set_wol) + if (phydev->drv && phydev->drv->set_wol) return phydev->drv->set_wol(phydev, wol); return -EOPNOTSUPP; @@ -1464,7 +1479,7 @@ EXPORT_SYMBOL(phy_ethtool_set_wol); void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { - if (phydev->drv->get_wol) + if (phydev->drv && phydev->drv->get_wol) phydev->drv->get_wol(phydev, wol); } EXPORT_SYMBOL(phy_ethtool_get_wol); --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1050,7 +1050,7 @@ int phy_suspend(struct phy_device *phyde if (wol.wolopts) return -EBUSY; - if (phydrv->suspend) + if (phydev->drv && phydrv->suspend) ret = phydrv->suspend(phydev); if (ret) @@ -1067,7 +1067,7 @@ int phy_resume(struct phy_device *phydev struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver); int ret = 0; - if (phydrv->resume) + if (phydev->drv && phydrv->resume) ret = phydrv->resume(phydev); if (ret) @@ -1724,7 +1724,7 @@ static int phy_remove(struct device *dev phydev->state = PHY_DOWN; mutex_unlock(&phydev->lock); - if (phydev->drv->remove) + if (phydev->drv && phydev->drv->remove) phydev->drv->remove(phydev); phydev->drv = NULL; --- a/drivers/net/phy/swphy.c +++ b/drivers/net/phy/swphy.c @@ -77,6 +77,7 @@ static const struct swmii_regs duplex[] static int swphy_decode_speed(int speed) { switch (speed) { + case 10000: case 1000: return SWMII_SPEED_1000; case 100: --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -81,6 +81,7 @@ typedef enum { PHY_INTERFACE_MODE_MOCA, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, + PHY_INTERFACE_MODE_2500SGMII, PHY_INTERFACE_MODE_MAX, } phy_interface_t; @@ -126,6 +127,8 @@ static inline const char *phy_modes(phy_ return "qsgmii"; case PHY_INTERFACE_MODE_TRGMII: return "trgmii"; + case PHY_INTERFACE_MODE_2500SGMII: + return "sgmii-2500"; default: return "unknown"; } @@ -791,6 +794,9 @@ int phy_stop_interrupts(struct phy_devic static inline int phy_read_status(struct phy_device *phydev) { + if (!phydev->drv) + return -EIO; + return phydev->drv->read_status(phydev); }