From 0e9d79db770196e94869650d7c4d13ea23937138 Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Mon, 25 Jan 2016 14:27:27 +0800 Subject: [PATCH 22/70] dt: move guts devicetree doc out of powerpc directory Move guts devicetree doc to Documentation/devicetree/bindings/soc/fsl/ since it's used by not only PowerPC but also ARM. And add a specification for 'little-endian' property. Signed-off-by: Yangbo Lu --- .../devicetree/bindings/powerpc/fsl/guts.txt | 41 ------------------ Documentation/devicetree/bindings/soc/fsl/guts.txt | 44 ++++++++++++++++++++ 2 files changed, 44 insertions(+), 41 deletions(-) delete mode 100644 Documentation/devicetree/bindings/powerpc/fsl/guts.txt create mode 100644 Documentation/devicetree/bindings/soc/fsl/guts.txt --- a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt +++ /dev/null @@ -1,41 +0,0 @@ -* Global Utilities Block - -The global utilities block controls power management, I/O device -enabling, power-on-reset configuration monitoring, general-purpose -I/O signal configuration, alternate function selection for multiplexed -signals, and clock control. - -Required properties: - - - compatible : Should define the compatible device type for - global-utilities. - Possible compatibles: - "fsl,qoriq-device-config-1.0" - "fsl,qoriq-device-config-2.0" - "fsl,-device-config" - "fsl,-guts" - - reg : Offset and length of the register set for the device. - -Recommended properties: - - - fsl,has-rstcr : Indicates that the global utilities register set - contains a functioning "reset control register" (i.e. the board - is wired to reset upon setting the HRESET_REQ bit in this register). - - - fsl,liodn-bits : Indicates the number of defined bits in the LIODN - registers, for those SOCs that have a PAMU device. - -Examples: - global-utilities@e0000 { /* global utilities block */ - compatible = "fsl,mpc8548-guts"; - reg = ; - fsl,has-rstcr; - }; - - guts: global-utilities@e0000 { - compatible = "fsl,qoriq-device-config-1.0"; - reg = <0xe0000 0xe00>; - fsl,has-rstcr; - #sleep-cells = <1>; - fsl,liodn-bits = <12>; - }; --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/guts.txt @@ -0,0 +1,44 @@ +* Global Utilities Block + +The global utilities block controls power management, I/O device +enabling, power-on-reset configuration monitoring, general-purpose +I/O signal configuration, alternate function selection for multiplexed +signals, and clock control. + +Required properties: + + - compatible : Should define the compatible device type for + global-utilities. + Possible compatibles: + "fsl,qoriq-device-config-1.0" + "fsl,qoriq-device-config-2.0" + "fsl,-device-config" + "fsl,-guts" + - reg : Offset and length of the register set for the device. + +Recommended properties: + + - fsl,has-rstcr : Indicates that the global utilities register set + contains a functioning "reset control register" (i.e. the board + is wired to reset upon setting the HRESET_REQ bit in this register). + + - fsl,liodn-bits : Indicates the number of defined bits in the LIODN + registers, for those SOCs that have a PAMU device. + + - little-endian : Indicates that the global utilities block is little + endian. The default is big endian. + +Examples: + global-utilities@e0000 { /* global utilities block */ + compatible = "fsl,mpc8548-guts"; + reg = ; + fsl,has-rstcr; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + };