From cc1d1d1b68d18a31aeb8a572ca6b3929b083855c Mon Sep 17 00:00:00 2001 From: Biwen Li Date: Wed, 17 Apr 2019 18:58:33 +0800 Subject: [PATCH] dts: support layerscape MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is an integrated patch of dts for layerscape Signed-off-by: Abhimanyu Saini Signed-off-by: Akhil Goyal Signed-off-by: Alan Wang Signed-off-by: Alison Wang Signed-off-by: Amrita Kumari Signed-off-by: Anjaneyulu Jagarlmudi Signed-off-by: Ashish Kumar Signed-off-by: Bharat Bhushan Signed-off-by: Bhaskar Upadhaya Signed-off-by: Bhupesh Sharma Signed-off-by: Biwen Li Signed-off-by: Bogdan Purcareata Signed-off-by: Calvin Johnson Signed-off-by: Camelia Groza Signed-off-by: Catalin Neacsu Signed-off-by: Changming Huang Signed-off-by: Chuanhua Han Signed-off-by: Constantin Tudor Signed-off-by: David S. Miller Signed-off-by: Florin Chiculita Signed-off-by: Florinel Iordache Signed-off-by: Guanhua Gao Signed-off-by: Honghua Yin Signed-off-by: Horia Geantă Signed-off-by: Hou Zhiqiang Signed-off-by: Ioana Radulescu Signed-off-by: Iordache Florinel-R70177 Signed-off-by: Jagdish Gediya Signed-off-by: jiaheng.fan Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang Signed-off-by: Madalin Bucur Signed-off-by: Mathew McBride Signed-off-by: Nipun Gupta Signed-off-by: Pankaj Bansal Signed-off-by: Pankaj Gupta Signed-off-by: Peng Ma Signed-off-by: Po Liu Signed-off-by: Prabhakar Kushwaha Signed-off-by: Pratiyush Mohan Srivastava Signed-off-by: Priyanka Jain Signed-off-by: Raghav Dogra Signed-off-by: Rai Harninder Signed-off-by: Ramneek Mehresh Signed-off-by: Ran Wang Signed-off-by: Roy Pledge Signed-off-by: Sakar Arora Signed-off-by: Santan Kumar Signed-off-by: Scott Wood Signed-off-by: Shaohui Xie Signed-off-by: Shawn Guo Signed-off-by: Sriram Dash Signed-off-by: Sumit Garg Signed-off-by: Suresh Gupta Signed-off-by: Tang Yuantian Signed-off-by: Tao Yang Signed-off-by: Vabhav Sharma Signed-off-by: Vicentiu Galanopulo Signed-off-by: Vladimir Oltean Signed-off-by: Wasim Khan Signed-off-by: Xiaowei Bao Signed-off-by: Yangbo Lu Signed-off-by: Yinbo Zhu Signed-off-by: Yogesh Gaur Signed-off-by: Yuantian Tang Signed-off-by: Yuan Yao Signed-off-by: Zhang Ying-22455 Signed-off-by: Zhao Chenhui Signed-off-by: Zhao Qiang --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/imx25.dtsi | 4 +- arch/arm/boot/dts/imx28.dtsi | 4 +- arch/arm/boot/dts/imx35.dtsi | 4 +- arch/arm/boot/dts/imx53.dtsi | 4 +- arch/arm/boot/dts/ls1021a-iot.dts | 262 ++++ arch/arm/boot/dts/ls1021a-qds.dts | 32 + arch/arm/boot/dts/ls1021a-twr.dts | 27 + arch/arm/boot/dts/ls1021a.dtsi | 111 +- arch/arm64/boot/dts/freescale/Makefile | 16 +- .../boot/dts/freescale/fsl-ls1012a-2g5rdb.dts | 126 ++ .../boot/dts/freescale/fsl-ls1012a-frdm.dts | 97 +- .../boot/dts/freescale/fsl-ls1012a-frwy.dts | 179 +++ .../boot/dts/freescale/fsl-ls1012a-qds.dts | 136 +- .../boot/dts/freescale/fsl-ls1012a-rdb.dts | 100 +- .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 210 ++- .../boot/dts/freescale/fsl-ls1043-post.dtsi | 3 +- .../dts/freescale/fsl-ls1043a-qds-sdk.dts | 263 ++++ .../boot/dts/freescale/fsl-ls1043a-qds.dts | 206 ++- .../dts/freescale/fsl-ls1043a-rdb-sdk.dts | 262 ++++ .../dts/freescale/fsl-ls1043a-rdb-usdpaa.dts | 140 ++ .../boot/dts/freescale/fsl-ls1043a-rdb.dts | 76 +- .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 382 +++-- .../boot/dts/freescale/fsl-ls1046-post.dtsi | 2 +- .../dts/freescale/fsl-ls1046a-qds-sdk.dts | 268 ++++ .../boot/dts/freescale/fsl-ls1046a-qds.dts | 194 ++- .../dts/freescale/fsl-ls1046a-rdb-sdk.dts | 307 ++++ .../dts/freescale/fsl-ls1046a-rdb-usdpaa.dts | 133 ++ .../boot/dts/freescale/fsl-ls1046a-rdb.dts | 48 +- .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 386 +++-- .../boot/dts/freescale/fsl-ls1088a-qds.dts | 88 +- .../boot/dts/freescale/fsl-ls1088a-rdb.dts | 150 +- .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 546 ++++++- .../boot/dts/freescale/fsl-ls2080a-qds.dts | 100 +- .../boot/dts/freescale/fsl-ls2080a-rdb.dts | 118 +- .../boot/dts/freescale/fsl-ls2080a-simu.dts | 38 +- .../arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 50 +- .../boot/dts/freescale/fsl-ls2081a-rdb.dts | 163 ++ .../boot/dts/freescale/fsl-ls2088a-qds.dts | 158 +- .../boot/dts/freescale/fsl-ls2088a-rdb.dts | 118 +- .../arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 52 +- .../boot/dts/freescale/fsl-ls208xa-qds.dtsi | 43 +- .../boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 60 +- .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 299 ++-- .../boot/dts/freescale/fsl-lx2160a-qds.dts | 353 +++++ .../boot/dts/freescale/fsl-lx2160a-rdb.dts | 241 +++ .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 1318 +++++++++++++++++ .../boot/dts/freescale/fsl-tmu-map1.dtsi | 99 ++ .../boot/dts/freescale/fsl-tmu-map2.dtsi | 99 ++ .../boot/dts/freescale/fsl-tmu-map3.dtsi | 99 ++ arch/arm64/boot/dts/freescale/fsl-tmu.dtsi | 251 ++++ .../dts/freescale/qoriq-bman-portals-sdk.dtsi | 55 + .../dts/freescale/qoriq-bman-portals.dtsi | 8 +- .../boot/dts/freescale/qoriq-dpaa-eth.dtsi | 97 ++ .../dts/freescale/qoriq-fman3-0-10g-0.dtsi | 11 +- .../dts/freescale/qoriq-fman3-0-10g-1.dtsi | 11 +- .../dts/freescale/qoriq-fman3-0-1g-0.dtsi | 7 +- .../dts/freescale/qoriq-fman3-0-1g-1.dtsi | 7 +- .../dts/freescale/qoriq-fman3-0-1g-2.dtsi | 7 +- .../dts/freescale/qoriq-fman3-0-1g-3.dtsi | 7 +- .../dts/freescale/qoriq-fman3-0-1g-4.dtsi | 7 +- .../dts/freescale/qoriq-fman3-0-1g-5.dtsi | 7 +- .../boot/dts/freescale/qoriq-fman3-0-6oh.dtsi | 47 + .../boot/dts/freescale/qoriq-fman3-0.dtsi | 67 +- .../dts/freescale/qoriq-qman-portals-sdk.dtsi | 38 + .../dts/freescale/qoriq-qman-portals.dtsi | 9 +- .../boot/dts/freescale/traverse-ls1043s.dts | 29 + .../boot/dts/freescale/traverse-ls1043v.dts | 29 + 68 files changed, 7660 insertions(+), 1211 deletions(-) create mode 100644 arch/arm/boot/dts/ls1021a-iot.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-tmu.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-bman-portals-sdk.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi create mode 100644 arch/arm64/boot/dts/freescale/qoriq-qman-portals-sdk.dtsi --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -496,7 +496,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7s-warp.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ - ls1021a-twr.dtb + ls1021a-twr.dtb \ + ls1021a-iot.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ vf610-colibri-eval-v3.dtb \ --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -122,7 +122,7 @@ }; can1: can@43f88000 { - compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx25-flexcan"; reg = <0x43f88000 0x4000>; interrupts = <43>; clocks = <&clks 75>, <&clks 75>; @@ -131,7 +131,7 @@ }; can2: can@43f8c000 { - compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx25-flexcan"; reg = <0x43f8c000 0x4000>; interrupts = <44>; clocks = <&clks 76>, <&clks 76>; --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1038,7 +1038,7 @@ }; can0: can@80032000 { - compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx28-flexcan"; reg = <0x80032000 0x2000>; interrupts = <8>; clocks = <&clks 58>, <&clks 58>; @@ -1047,7 +1047,7 @@ }; can1: can@80034000 { - compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx28-flexcan"; reg = <0x80034000 0x2000>; interrupts = <9>; clocks = <&clks 59>, <&clks 59>; --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -303,7 +303,7 @@ }; can1: can@53fe4000 { - compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx35-flexcan"; reg = <0x53fe4000 0x1000>; clocks = <&clks 33>, <&clks 33>; clock-names = "ipg", "per"; @@ -312,7 +312,7 @@ }; can2: can@53fe8000 { - compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx35-flexcan"; reg = <0x53fe8000 0x1000>; clocks = <&clks 34>, <&clks 34>; clock-names = "ipg", "per"; --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -536,7 +536,7 @@ }; can1: can@53fc8000 { - compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx53-flexcan"; reg = <0x53fc8000 0x4000>; interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, @@ -546,7 +546,7 @@ }; can2: can@53fcc000 { - compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + compatible = "fsl,imx53-flexcan"; reg = <0x53fcc000 0x4000>; interrupts = <83>; clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-iot.dts @@ -0,0 +1,262 @@ +/* + * Copyright 2013-2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A IOT Board"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + fixed-link = <0 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&can0{ + status = "disabled"; +}; + +&can1{ + status = "disabled"; +}; + +&can2{ + status = "disabled"; +}; + +&can3{ + status = "okay"; +}; + +&esdhc{ + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + max1239@35 { + compatible = "maxim,max1239"; + reg = <0x35>; + #io-channel-cells = <1>; + }; + + codec: sgtl5000@2a { + #sound-dai-cells=<0x0>; + compatible = "fsl,sgtl5000"; + reg = <0x2a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_2p5v>; + clocks = <&sys_mclk 1>; + }; + + pca9555: pca9555@23 { + compatible = "nxp,pca9555"; + /*pinctrl-names = "default";*/ + /*interrupt-parent = <&gpio2>; + interrupts = <19 0x2>;*/ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x23>; + }; + + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + lm75b@48 { + compatible = "nxp,lm75a"; + reg = <0x48>; + }; + + adt7461a@4c { + compatible = "adt7461a"; + reg = <0x4c>; + }; + + hdmi: sii9022a@39 { + compatible = "fsl,sii902x"; + reg = <0x39>; + interrupts = ; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&ifc { + status = "disabled"; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + reg = <0x3>; + }; + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + num-cs = <2>; + status = "okay"; + + qflash0: s25fl128s@0 { + compatible = "spansion,s25fl129p1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sai2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&dcu { + display = <&display>; + status = "okay"; + + display: display@0 { + bits-per-pixel = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: mode0 { + clock-frequency = <25000000>; + hactive = <640>; + vactive = <480>; + hback-porch = <80>; + hfront-porch = <80>; + vback-porch = <16>; + vfront-porch = <16>; + hsync-len = <12>; + vsync-len = <2>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; +}; --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -124,6 +124,21 @@ }; }; +&qspi { + num-cs = <2>; + status = "okay"; + + qflash0: s25fl128s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + &enet0 { tbi-handle = <&tbi0>; phy-handle = <&sgmii_phy1c>; @@ -239,6 +254,11 @@ device-width = <1>; }; + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + fpga: board-control@3,0 { #address-cells = <1>; #size-cells = <1>; @@ -316,6 +336,10 @@ }; }; +&esdhc { + status = "okay"; +}; + &sai2 { status = "okay"; }; @@ -331,3 +355,11 @@ &uart1 { status = "okay"; }; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -142,6 +142,21 @@ }; }; +&qspi { + num-cs = <2>; + status = "okay"; + + qflash0: n25q128a13@0 { + compatible = "n25q128a13", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + &enet0 { tbi-handle = <&tbi1>; phy-handle = <&sgmii_phy2>; @@ -228,6 +243,10 @@ }; }; +&esdhc { + status = "okay"; +}; + &sai1 { status = "okay"; }; @@ -243,3 +262,11 @@ &uart1 { status = "okay"; }; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -146,12 +146,13 @@ ifc: ifc@1530000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x1530000 0x0 0x10000>; + big-endian; interrupts = ; }; dcfg: dcfg@1ee0000 { compatible = "fsl,ls1021a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; @@ -334,25 +335,44 @@ status = "disabled"; }; + qspi: quadspi@1550000 { + compatible = "fsl,ls1021a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1550000 0x0 0x10000>, + <0x0 0x40000000 0x0 0x4000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = ; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + status = "disabled"; + }; + i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = ; clock-names = "i2c"; clocks = <&clockgen 4 1>; + dma-names = "tx", "rx"; + dmas = <&edma0 1 39>, + <&edma0 1 38>; + fsl-scl-gpio = <&gpio3 23 0>; status = "disabled"; }; i2c1: i2c@2190000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = ; clock-names = "i2c"; clocks = <&clockgen 4 1>; + fsl-scl-gpio = <&gpio3 23 0>; status = "disabled"; }; @@ -497,6 +517,17 @@ status = "disabled"; }; + ftm0: ftm0@29d0000 { + compatible = "fsl,ls1021a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>, + <0x0 0x1ee2144 0x0 0x4>, + <0x0 0x0157051c 0x0 0x4>; + reg-names = "ftm", "pmctrl", "scrachpad"; + interrupts = ; + big-endian; + status = "okay"; + }; + wdog0: watchdog@2ad0000 { compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; @@ -550,6 +581,25 @@ <&clockgen 4 1>; }; + qdma: qdma@8390000 { + compatible = "fsl,ls1021a-qdma"; + reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8389000 0x0 0x1000>, /* Status regs */ + <0x0 0x838a000 0x0 0x2000>; /* Block regs */ + interrupts = , + , + ; + interrupt-names = "qdma-error", + "qdma-queue0", "qdma-queue1"; + channels = <8>; + block-number = <2>; + block-offset = <0x1000>; + queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; + }; + dcu: dcu@2ce0000 { compatible = "fsl,ls1021a-dcu"; reg = <0x0 0x2ce0000 0x0 0x10000>; @@ -684,6 +734,11 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + configure-gfladj; + usb3-lpm-capable; + snps,dis-u1u2-when-u3-quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; }; pcie@3400000 { @@ -691,7 +746,9 @@ reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = ; /* controller interrupt */ + interrupts = , + ; /* aer interrupt */ + interrupt-names = "pme", "aer"; fsl,pcie-scfg = <&scfg 0>; #address-cells = <3>; #size-cells = <2>; @@ -707,6 +764,7 @@ <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; pcie@3500000 { @@ -714,7 +772,9 @@ reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = ; + interrupts = , + ; /* aer interrupt */ + interrupt-names = "pme", "aer"; fsl,pcie-scfg = <&scfg 1>; #address-cells = <3>; #size-cells = <2>; @@ -730,6 +790,47 @@ <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + can0: can@2a70000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a70000 0x0 0x1000>; + interrupts = ; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + status = "disabled"; + }; + + can1: can@2a80000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a80000 0x0 0x1000>; + interrupts = ; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + status = "disabled"; + }; + + can2: can@2a90000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2a90000 0x0 0x1000>; + interrupts = ; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + status = "disabled"; + }; + + can3: can@2aa0000 { + compatible = "fsl,ls1021ar2-flexcan"; + reg = <0x0 0x2aa0000 0x0 0x1000>; + interrupts = ; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + big-endian; + status = "disabled"; }; }; }; --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,19 +1,33 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-2g5rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds-sdk.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb-sdk.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb-usdpaa.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds-sdk.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb-sdk.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb-usdpaa.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb - +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb + +dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043v.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += traverse-ls1043s.dtb + always := $(dtb-y) subdir-y := $(dts-dirs) clean-files := *.dtb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-2g5rdb.dts @@ -0,0 +1,126 @@ +/* + * Device Tree file for NXP LS1012A 2G5RDB Board. + * + * Copyright 2017 NXP + * + * Bhaskar Upadhaya + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A 2G5RDB Board"; + compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; + + aliases { + ethernet0 = &pfe_mac0; + ethernet1 = &pfe_mac1; + }; +}; + +&duart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&qspi { + num-cs = <2>; + bus-num = <0>; + status = "okay"; + + qflash0: s25fs512s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + m25p,fast-read; + reg = <0>; + }; +}; + +&sata { + status = "okay"; +}; + +&pfe { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pfe_mac0: ethernet@0 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii-2500"; + phy-handle = <&sgmii_phy1>; + }; + + pfe_mac1: ethernet@1 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* GEM_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii-2500"; + phy-handle = <&sgmii_phy2>; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + + sgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + sgmii_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + }; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A Freedom Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -49,6 +13,11 @@ model = "LS1012A Freedom Board"; compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; + aliases { + ethernet0 = &pfe_mac0; + ethernet1 = &pfe_mac1; + }; + sys_mclk: clock-mclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -110,6 +79,45 @@ }; }; +&pfe { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pfe_mac0: ethernet@0 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; + phy-handle = <&sgmii_phy1>; + }; + + pfe_mac1: ethernet@1 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* GEM_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; + phy-handle = <&sgmii_phy2>; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + + sgmii_phy1: ethernet-phy@2 { + reg = <0x2>; + }; + + sgmii_phy2: ethernet-phy@1 { + reg = <0x1>; + }; + }; +}; + &sai2 { status = "okay"; }; @@ -117,3 +125,18 @@ &sata { status = "okay"; }; + +&qspi { + status = "okay"; + qflash0: s25fs512s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + m25p,fast-read; + reg = <0>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; + +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts @@ -0,0 +1,179 @@ +/* + * Device Tree file for NXP LS1012A FRWY Board. + * + * Copyright 2018 NXP + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "fsl-ls1012a.dtsi" + +/ { + model = "LS1012A FRWY Board"; + compatible = "fsl,ls1012a-frwy", "fsl,ls1012a"; + + aliases { + ethernet0 = &pfe_mac0; + ethernet1 = &pfe_mac1; + }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + system-clock-frequency = <25000000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&duart0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + codec: sgtl5000@a { + compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; + reg = <0xa>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_1p8v>; + clocks = <&sys_mclk>; + }; +}; + +&qspi { + num-cs = <1>; + bus-num = <0>; + status = "okay"; + + qflash0: w25q16dw@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + m25p,fast-read; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&pfe { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pfe_mac0: ethernet@0 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ + fsl,gemac-bus-id = <0x0>; /* BUS_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; + phy-handle = <&sgmii_phy1>; + }; + + pfe_mac1: ethernet@1 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* GEM_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; + phy-handle = <&sgmii_phy2>; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + + sgmii_phy1: ethernet-phy@2 { + reg = <0x2>; + }; + + sgmii_phy2: ethernet-phy@1 { + reg = <0x1>; + }; + }; +}; + +&sai2 { + status = "okay"; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A QDS Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -49,6 +13,11 @@ model = "LS1012A QDS Board"; compatible = "fsl,ls1012a-qds", "fsl,ls1012a"; + aliases { + ethernet0 = &pfe_mac0; + ethernet1 = &pfe_mac1; + }; + sys_mclk: clock-mclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -93,6 +62,43 @@ }; }; +&pcie { + status = "okay"; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a11", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst25wf040b", "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25s64", "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + &duart0 { status = "okay"; }; @@ -131,6 +137,47 @@ }; }; +&pfe { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pfe_mac0: ethernet@0 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ + fsl,mdio-mux-val = <0x2>; + phy-mode = "sgmii-2500"; + phy-handle = <&sgmii_phy1>; + }; + + pfe_mac1: ethernet@1 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* GEM_ID */ + fsl,mdio-mux-val = <0x3>; + phy-mode = "sgmii-2500"; + phy-handle = <&sgmii_phy2>; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + + sgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + sgmii_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + }; +}; + &sai2 { status = "okay"; }; @@ -138,3 +185,18 @@ &sata { status = "okay"; }; + +&qspi { + status = "okay"; + qflash0: s25fs512s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + m25p,fast-read; + reg = <0>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; + +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS1012A RDB Board. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -48,6 +12,15 @@ / { model = "LS1012A RDB Board"; compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; + + aliases { + ethernet0 = &pfe_mac0; + ethernet1 = &pfe_mac1; + }; +}; + +&pcie { + status = "okay"; }; &duart0 { @@ -74,3 +47,56 @@ &sata { status = "okay"; }; + +&pfe { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pfe_mac0: ethernet@0 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* GEM_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "sgmii"; + phy-handle = <&sgmii_phy>; + }; + + pfe_mac1: ethernet@1 { + compatible = "fsl,pfe-gemac-port"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* GEM_ID */ + fsl,mdio-mux-val = <0x0>; + phy-mode = "rgmii-txid"; + phy-handle = <&rgmii_phy>; + }; + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + + sgmii_phy: ethernet-phy@2 { + reg = <0x2>; + }; + + rgmii_phy: ethernet-phy@1 { + reg = <0x1>; + }; + }; +}; + +&qspi { + status = "okay"; + qflash0: s25fs512s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + m25p,fast-read; + reg = <0>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <2>; + }; + +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -1,45 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1012A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include @@ -64,12 +28,30 @@ #address-cells = <1>; #size-cells = <0>; - cpu0: cpu@0 { + cooling_map0: cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; clocks = <&clockgen 1 0>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_PH20>; + }; + }; + + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "arm,psci"; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; }; }; @@ -247,7 +229,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1012a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; @@ -304,44 +286,25 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + #include "fsl-tmu.dtsi" - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; + ftm0: ftm0@29d0000 { + compatible = "fsl,ls1012a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>, + <0x0 0x1ee2140 0x0 0x4>; + reg-names = "ftm", "pmctrl"; + interrupts = <0 86 0x4>; + big-endian; }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,vf610-i2c", "fsl,ls1012a-vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen 4 3>; + scl-gpios = <&gpio0 13 0>; status = "disabled"; }; @@ -351,7 +314,20 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + dspi: dspi@2100000 { + compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; clocks = <&clockgen 4 0>; + spi-num-chipselects = <5>; + big-endian; status = "disabled"; }; @@ -400,6 +376,20 @@ big-endian; }; + qspi: quadspi@1550000 { + compatible = "fsl,ls1012a-qspi", "fsl,ls1021a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1550000 0x0 0x10000>, + <0x0 0x40000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen 4 0>, <&clockgen 4 0>; + big-endian; + status = "disabled"; + }; + sai1: sai@2b50000 { #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; @@ -451,6 +441,8 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; }; sata: sata@3200000 { @@ -471,5 +463,85 @@ dr_mode = "host"; phy_type = "ulpi"; }; + + msi: msi-controller1@1572000 { + compatible = "fsl,ls1012a-msi"; + reg = <0x0 0x1572000 0x0 0x8>; + msi-controller; + interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; + }; + + pcie: pcie@3400000 { + compatible = "fsl,ls1012a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 118 0x4>, /* AER interrupt */ + <0 117 0x4>; /* PME interrupt */ + interrupt-names = "aer", "pme"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + rcpm: rcpm@1ee2000 { + compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1"; + reg = <0x0 0x1ee2000 0x0 0x1000>; + fsl,#rcpm-wakeup-cells = <1>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + pfe_reserved: packetbuffer@83400000 { + reg = <0 0x83400000 0 0xc00000>; + }; + }; + + pfe: pfe@04000000 { + compatible = "fsl,pfe"; + reg = <0x0 0x04000000 0x0 0xc00000>, /* AXI 16M */ + <0x0 0x83400000 0x0 0xc00000>; /* PFE DDR 12M */ + reg-names = "pfe", "pfe-ddr"; + fsl,pfe-num-interfaces = <0x2>; + interrupts = <0 172 0x4>, /* HIF interrupt */ + <0 173 0x4>, /*HIF_NOCPY interrupt */ + <0 174 0x4>; /* WoL interrupt */ + interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol"; + memory-region = <&pfe_reserved>; + fsl,pfe-scfg = <&scfg 0>; + fsl,rcpm-wakeup = <&rcpm 0xf0000020>; + clocks = <&clockgen 4 0>; + clock-names = "pfe"; + + status = "okay"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&thermal_zones { + thermal-zone0 { + status = "okay"; }; }; --- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree nodes for ls1043 * * Copyright 2015-2016 Freescale Semiconductor Inc. - * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &soc { --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds-sdk.dts @@ -0,0 +1,263 @@ +/* + * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * + * Copyright 2014-2015 Freescale Semiconductor, Inc. + * + * Mingkai Hu + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "fsl-ls1043a-qds.dts" +#include "qoriq-qman-portals-sdk.dtsi" +#include "qoriq-bman-portals-sdk.dtsi" + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&soc { +/delete-property/ dma-coherent; + +#include "qoriq-dpaa-eth.dtsi" +#include "qoriq-fman3-0-6oh.dtsi" + +pcie@3400000 { + /delete-property/ iommu-map; + dma-coherent; +}; + +pcie@3500000 { + /delete-property/ iommu-map; + dma-coherent; +}; + +pcie@3600000 { + /delete-property/ iommu-map; + dma-coherent; +}; + +/delete-node/ iommu@9000000; +}; + +&fman0 { + compatible = "fsl,fman", "simple-bus"; + dma-coherent; +}; + +&clockgen { + dma-coherent; +}; + +&scfg { + dma-coherent; +}; + +&crypto { + dma-coherent; +}; + +&dcfg { + dma-coherent; +}; + +&ifc { + dma-coherent; +}; + +&qspi { + dma-coherent; +}; + +&esdhc { + dma-coherent; +}; + +&ddr { + dma-coherent; +}; + +&tmu { + dma-coherent; +}; + +&qman { + dma-coherent; +}; + +&bman { + dma-coherent; +}; + +&bportals { + dma-coherent; +}; + +&qportals { + dma-coherent; +}; + +&dspi0 { + dma-coherent; +}; + +&dspi1 { + dma-coherent; +}; + +&i2c0 { + dma-coherent; +}; + +&i2c1 { + dma-coherent; +}; + +&i2c2 { + dma-coherent; +}; + +&i2c3 { + dma-coherent; +}; + +&duart0 { + dma-coherent; +}; + +&duart1 { + dma-coherent; +}; + +&duart2 { + dma-coherent; +}; + +&duart3 { + dma-coherent; +}; + +&gpio1 { + dma-coherent; +}; + +&gpio2 { + dma-coherent; +}; + +&gpio3 { + dma-coherent; +}; + +&gpio4 { + dma-coherent; +}; + +&uqe { + dma-coherent; +}; + +&lpuart0 { + dma-coherent; +}; + +&lpuart1 { + dma-coherent; +}; + +&lpuart2 { + dma-coherent; +}; + +&lpuart3 { + dma-coherent; +}; + +&lpuart4 { + dma-coherent; +}; + +&lpuart5 { + dma-coherent; +}; + +&ftm0 { + dma-coherent; +}; + +&wdog0 { + dma-coherent; +}; + +&edma0 { + dma-coherent; +}; + +&qdma { + dma-coherent; +}; + +&msi1 { + dma-coherent; +}; + +&msi2 { + dma-coherent; +}; + +&msi3 { + dma-coherent; +}; + +&ptp_timer0 { + dma-coherent; +}; + +&fsldpaa { + dma-coherent; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -60,6 +23,22 @@ serial1 = &duart1; serial2 = &duart2; serial3 = &duart3; + sgmii_riser_s1_p1 = &sgmii_phy_s1_p1; + sgmii_riser_s2_p1 = &sgmii_phy_s2_p1; + sgmii_riser_s3_p1 = &sgmii_phy_s3_p1; + sgmii_riser_s4_p1 = &sgmii_phy_s4_p1; + qsgmii_s1_p1 = &qsgmii_phy_s1_p1; + qsgmii_s1_p2 = &qsgmii_phy_s1_p2; + qsgmii_s1_p3 = &qsgmii_phy_s1_p3; + qsgmii_s1_p4 = &qsgmii_phy_s1_p4; + qsgmii_s2_p1 = &qsgmii_phy_s2_p1; + qsgmii_s2_p2 = &qsgmii_phy_s2_p2; + qsgmii_s2_p3 = &qsgmii_phy_s2_p3; + qsgmii_s2_p4 = &qsgmii_phy_s2_p4; + emi1_slot1 = &ls1043mdio_s1; + emi1_slot2 = &ls1043mdio_s2; + emi1_slot3 = &ls1043mdio_s3; + emi1_slot4 = &ls1043mdio_s4; }; chosen { @@ -97,8 +76,11 @@ }; fpga: board-control@2,0 { - compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis"; + compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-bus"; reg = <0x2 0x0 0x0000100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 2 0 0x100>; }; }; @@ -179,7 +161,153 @@ #size-cells = <1>; spi-max-frequency = <20000000>; reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; }; #include "fsl-ls1043-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy_s2_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&qsgmii_phy_s2_p2>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&qsgmii_phy_s2_p3>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii_phy_s2_p4>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* DTSEC9/10GEC1 */ + fixed-link = <1 1 10000 0 0>; + phy-connection-type = "xgmii"; + }; +}; + +&fpga { + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1 */ + + /* On-board RGMII1 PHY */ + ls1043mdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { /* MAC3 */ + reg = <0x1>; + }; + }; + + /* On-board RGMII2 PHY */ + ls1043mdio1: mdio@1 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { /* MAC4 */ + reg = <0x2>; + }; + }; + + /* Slot 1 */ + ls1043mdio_s1: mdio@2 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + qsgmii_phy_s1_p1: ethernet-phy@4 { + reg = <0x4>; + }; + qsgmii_phy_s1_p2: ethernet-phy@5 { + reg = <0x5>; + }; + qsgmii_phy_s1_p3: ethernet-phy@6 { + reg = <0x6>; + }; + qsgmii_phy_s1_p4: ethernet-phy@7 { + reg = <0x7>; + }; + + sgmii_phy_s1_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + /* Slot 2 */ + ls1043mdio_s2: mdio@3 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + qsgmii_phy_s2_p1: ethernet-phy@8 { + reg = <0x8>; + }; + qsgmii_phy_s2_p2: ethernet-phy@9 { + reg = <0x9>; + }; + qsgmii_phy_s2_p3: ethernet-phy@a { + reg = <0xa>; + }; + qsgmii_phy_s2_p4: ethernet-phy@b { + reg = <0xb>; + }; + + sgmii_phy_s2_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + /* Slot 3 */ + ls1043mdio_s3: mdio@4 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s3_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + /* Slot 4 */ + ls1043mdio_s4: mdio@5 { + reg = <0xa0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s4_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + }; +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-sdk.dts @@ -0,0 +1,262 @@ +/* + * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * + * Copyright 2014-2015 Freescale Semiconductor, Inc. + * + * Mingkai Hu + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "fsl-ls1043a-rdb.dts" +#include "qoriq-qman-portals-sdk.dtsi" +#include "qoriq-bman-portals-sdk.dtsi" + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&soc { +/delete-property/ dma-coherent; + +#include "qoriq-dpaa-eth.dtsi" +#include "qoriq-fman3-0-6oh.dtsi" + +pcie@3400000 { + /delete-property/ iommu-map; + dma-coherent; +}; + +pcie@3500000 { + /delete-property/ iommu-map; + dma-coherent; +}; + +pcie@3600000 { + /delete-property/ iommu-map; + dma-coherent; +}; + +/delete-node/ iommu@9000000; +}; + +&fman0 { + compatible = "fsl,fman", "simple-bus"; +}; + +&clockgen { + dma-coherent; +}; + +&scfg { + dma-coherent; +}; + +&crypto { + dma-coherent; +}; + +&dcfg { + dma-coherent; +}; + +&ifc { + dma-coherent; +}; + +&qspi { + dma-coherent; +}; + +&esdhc { + dma-coherent; +}; + +&ddr { + dma-coherent; +}; + +&tmu { + dma-coherent; +}; + +&qman { + dma-coherent; +}; + +&bman { + dma-coherent; +}; + +&bportals { + dma-coherent; +}; + +&qportals { + dma-coherent; +}; + +&dspi0 { + dma-coherent; +}; + +&dspi1 { + dma-coherent; +}; + +&i2c0 { + dma-coherent; +}; + +&i2c1 { + dma-coherent; +}; + +&i2c2 { + dma-coherent; +}; + +&i2c3 { + dma-coherent; +}; + +&duart0 { + dma-coherent; +}; + +&duart1 { + dma-coherent; +}; + +&duart2 { + dma-coherent; +}; + +&duart3 { + dma-coherent; +}; + +&gpio1 { + dma-coherent; +}; + +&gpio2 { + dma-coherent; +}; + +&gpio3 { + dma-coherent; +}; + +&gpio4 { + dma-coherent; +}; + +&lpuart0 { + dma-coherent; +}; + +&lpuart1 { + dma-coherent; +}; + +&lpuart2 { + dma-coherent; +}; + +&lpuart3 { + dma-coherent; +}; + +&lpuart4 { + dma-coherent; +}; + +&lpuart5 { + dma-coherent; +}; + +&ftm0 { + dma-coherent; +}; + +&wdog0 { + dma-coherent; +}; + +&edma0 { + dma-coherent; +}; + +&qdma { + dma-coherent; +}; + +&msi1 { + dma-coherent; +}; + +&msi2 { + dma-coherent; +}; + +&msi3 { + dma-coherent; +}; + +&fman0 { + dma-coherent; +}; + +&ptp_timer0 { + dma-coherent; +}; + +&fsldpaa { + dma-coherent; +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb-usdpaa.dts @@ -0,0 +1,140 @@ +/* + * Device Tree Include file for Freescale Layerscape-1043A family SoC. + * + * Copyright (C) 2014-2015, Freescale Semiconductor + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include "fsl-ls1043a-rdb-sdk.dts" + +&soc { + bp7: buffer-pool@7 { + compatible = "fsl,p4080-bpool", "fsl,bpool"; + fsl,bpid = <7>; + fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>; + fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>; + dma-coherent; + }; + + bp8: buffer-pool@8 { + compatible = "fsl,p4080-bpool", "fsl,bpool"; + fsl,bpid = <8>; + fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>; + fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>; + dma-coherent; + }; + + bp9: buffer-pool@9 { + compatible = "fsl,p4080-bpool", "fsl,bpool"; + fsl,bpid = <9>; + fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>; + fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>; + dma-coherent; + }; + + fsl,dpaa { + compatible = "fsl,ls1043a", "fsl,dpaa", "simple-bus"; + dma-coherent; + + ethernet@0 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x50 1 0x51 1>; + fsl,qman-frame-queues-tx = <0x70 1 0x71 1>; + }; + + ethernet@1 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x52 1 0x53 1>; + fsl,qman-frame-queues-tx = <0x72 1 0x73 1>; + }; + + ethernet@2 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x54 1 0x55 1>; + fsl,qman-frame-queues-tx = <0x74 1 0x75 1>; + }; + + ethernet@3 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x56 1 0x57 1>; + fsl,qman-frame-queues-tx = <0x76 1 0x77 1>; + }; + + ethernet@4 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x58 1 0x59 1>; + fsl,qman-frame-queues-tx = <0x78 1 0x79 1>; + }; + + ethernet@5 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x60 1 0x61 1>; + fsl,qman-frame-queues-tx = <0x80 1 0x81 1>; + }; + + ethernet@8 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>; + fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>; + + }; + dpa-fman0-oh@2 { + compatible = "fsl,dpa-oh"; + /* Define frame queues for the OH port*/ + /* */ + fsl,qman-frame-queues-oh = <0x5a 1 0x5b 1>; + fsl,fman-oh-port = <&fman0_oh2>; + }; + }; + + pcie@3400000 { + /delete-property/ iommu-map; + }; + + pcie@3500000 { + /delete-property/ iommu-map; + }; + + pcie@3600000 { + /delete-property/ iommu-map; + }; + + /delete-node/ iommu@9000000; +}; +/ { + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* For legacy usdpaa based use-cases, update the size and + alignment parameters. e.g. to allocate 256 MB memory: + size = <0 0x10000000>; + alignment = <0 0x10000000>; + */ + usdpaa_mem: usdpaa_mem { + compatible = "fsl,usdpaa-mem"; + alloc-ranges = <0 0 0x10000 0>; + size = <0 0x1000>; + alignment = <0 0x1000>; + }; + }; +}; + +&fman0 { + fman0_oh2: port@83000 { + cell-index = <1>; + compatible = "fsl,fman-port-oh"; + reg = <0x83000 0x1000>; + }; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -51,7 +14,6 @@ model = "LS1043A RDB Board"; aliases { - crypto = &crypto; serial0 = &duart0; serial1 = &duart1; serial2 = &duart2; @@ -86,6 +48,10 @@ compatible = "pericom,pt7c4338"; reg = <0x68>; }; + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; }; &ifc { @@ -130,6 +96,38 @@ reg = <0>; spi-max-frequency = <1000000>; /* input clock */ }; + + slic@2 { + compatible = "maxim,ds26522"; + reg = <2>; + spi-max-frequency = <2000000>; + fsl,spi-cs-sck-delay = <100>; + fsl,spi-sck-cs-delay = <50>; + }; + + slic@3 { + compatible = "maxim,ds26522"; + reg = <3>; + spi-max-frequency = <2000000>; + fsl,spi-cs-sck-delay = <100>; + fsl,spi-sck-cs-delay = <50>; + }; +}; + +&uqe { + ucc_hdlc: ucc@2000 { + compatible = "fsl,ucc-hdlc"; + rx-clock-name = "clk8"; + tx-clock-name = "clk9"; + fsl,rx-sync-clock = "rsync_pin"; + fsl,tx-sync-clock = "tsync_pin"; + fsl,tx-timeslot-mask = <0xfffffffe>; + fsl,rx-timeslot-mask = <0xfffffffe>; + fsl,tdm-framer-type = "e1"; + fsl,tdm-id = <0>; + fsl,siram-entry-id = <0>; + fsl,tdm-interface; + }; }; &duart0 { --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1043A family SoC. * * Copyright 2014-2015 Freescale Semiconductor, Inc. * * Mingkai Hu - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include @@ -54,6 +17,7 @@ #size-cells = <2>; aliases { + crypto = &crypto; fman0 = &fman0; ethernet0 = &enet0; ethernet1 = &enet1; @@ -74,13 +38,14 @@ * * Currently supported enable-method is psci v0.2 */ - cpu0: cpu@0 { + cooling_map0: cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_PH20>; }; cpu1: cpu@1 { @@ -89,6 +54,7 @@ reg = <0x1>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; }; cpu2: cpu@2 { @@ -97,6 +63,7 @@ reg = <0x2>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; }; cpu3: cpu@3 { @@ -105,6 +72,7 @@ reg = <0x3>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; }; l2: l2-cache { @@ -112,6 +80,23 @@ }; }; + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "arm,psci"; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; + }; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0 0x80000000>; @@ -196,6 +181,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; clockgen: clocking@1ee1000 { compatible = "fsl,ls1043a-clockgen"; @@ -204,6 +191,49 @@ clocks = <&sysclk>; }; + smmu: iommu@9000000 { + compatible = "arm,mmu-500"; + reg = <0 0x9000000 0 0x400000>; + dma-coherent; + stream-match-mask = <0x7f00>; + #global-interrupts = <2>; + #iommu-cells = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + scfg: scfg@1570000 { compatible = "fsl,ls1043a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; @@ -255,7 +285,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1043a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; @@ -342,36 +372,7 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 3>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; + #include "fsl-tmu.dtsi" qman: qman@1880000 { compatible = "fsl,qman"; @@ -422,7 +423,7 @@ }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,vf610-i2c", "fsl,ls1043a-vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; @@ -432,6 +433,7 @@ dmas = <&edma0 1 39>, <&edma0 1 38>; dma-names = "tx", "rx"; + scl-gpios = <&gpio4 12 0>; status = "disabled"; }; @@ -536,6 +538,72 @@ #interrupt-cells = <2>; }; + uqe: uqe@2400000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe", "simple-bus"; + ranges = <0x0 0x0 0x2400000 0x40000>; + reg = <0x0 0x2400000 0x0 0x480>; + brg-frequency = <100000000>; + bus-frequency = <200000000>; + + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + qeic: qeic@80 { + compatible = "fsl,qe-ic"; + reg = <0x80 0x80>; + #address-cells = <0>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <0 77 0x04 0 77 0x04>; + }; + + si1: si@700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,ls1043-qe-si", + "fsl,t1040-qe-si"; + reg = <0x700 0x80>; + }; + + siram1: siram@1000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ls1043-qe-siram", + "fsl,t1040-qe-siram"; + reg = <0x1000 0x800>; + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@2200 { + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x6000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x6000>; + }; + }; + }; + lpuart0: serial@2950000 { compatible = "fsl,ls1021a-lpuart"; reg = <0x0 0x2950000 0x0 0x1000>; @@ -590,6 +658,16 @@ status = "disabled"; }; + ftm0: ftm0@29d0000 { + compatible = "fsl,ls1043a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>, + <0x0 0x1ee2140 0x0 0x4>; + reg-names = "ftm", "pmctrl"; + interrupts = <0 86 0x4>; + big-endian; + status = "okay"; + }; + wdog0: wdog@2ad0000 { compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; @@ -615,41 +693,81 @@ <&clockgen 4 0>; }; - usb0: usb3@2f00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = <0 60 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - }; - - usb1: usb3@3000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3000000 0x0 0x10000>; - interrupts = <0 61 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - }; - - usb2: usb3@3100000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 63 0x4>; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - }; - - sata: sata@3200000 { - compatible = "fsl,ls1043a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; - reg-names = "ahci", "sata-ecc"; - interrupts = <0 69 0x4>; - clocks = <&clockgen 4 0>; - dma-coherent; + aux_bus: aux_bus { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb3@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <0 60 0x4>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,dis-u1u2-when-u3-quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + }; + + usb1: usb3@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <0 61 0x4>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,dis-u1u2-when-u3-quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + }; + + usb2: usb3@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 63 0x4>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,dis-u1u2-when-u3-quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1043a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <0 69 0x4>; + clocks = <&clockgen 4 0>; + }; + }; + + qdma: qdma@8380000 { + compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = <0 152 0x4>, + <0 39 0x4>, + <0 40 0x4>, + <0 41 0x4>, + <0 42 0x4>; + interrupt-names = "qdma-error", "qdma-queue0", + "qdma-queue1", "qdma-queue2", "qdma-queue3"; + channels = <8>; + block-number = <1>; + block-offset = <0x10000>; + queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; }; msi1: msi-controller1@1571000 { @@ -678,13 +796,13 @@ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 118 0x4>, /* controller interrupt */ - <0 117 0x4>; /* PME interrupt */ - interrupt-names = "intr", "pme"; + interrupts = <0 117 0x4>, /* PME interrupt */ + <0 118 0x4>; /* aer interrupt */ + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; + iommu-map = <0 &smmu 0 1>; num-lanes = <4>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -696,6 +814,7 @@ <0000 0 0 2 &gic 0 111 0x4>, <0000 0 0 3 &gic 0 112 0x4>, <0000 0 0 4 &gic 0 113 0x4>; + status = "disabled"; }; pcie@3500000 { @@ -703,13 +822,13 @@ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 128 0x4>, - <0 127 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 127 0x4>, + <0 128 0x4>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; + iommu-map = <0 &smmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -721,6 +840,7 @@ <0000 0 0 2 &gic 0 121 0x4>, <0000 0 0 3 &gic 0 122 0x4>, <0000 0 0 4 &gic 0 123 0x4>; + status = "disabled"; }; pcie@3600000 { @@ -728,13 +848,13 @@ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; - interrupts = <0 162 0x4>, - <0 161 0x4>; - interrupt-names = "intr", "pme"; + interrupts = <0 161 0x4>, + <0 162 0x4>; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - dma-coherent; + iommu-map = <0 &smmu 0 1>; num-lanes = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -746,6 +866,14 @@ <0000 0 0 2 &gic 0 155 0x4>, <0000 0 0 3 &gic 0 156 0x4>, <0000 0 0 4 &gic 0 157 0x4>; + status = "disabled"; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; }; }; @@ -753,3 +881,29 @@ #include "qoriq-qman-portals.dtsi" #include "qoriq-bman-portals.dtsi" + +&thermal_zones { + thermal-zone0 { + status = "okay"; + }; + + thermal-zone1 { + status = "okay"; + }; + + thermal-zone2 { + status = "okay"; + }; + + thermal-zone3 { + status = "okay"; + }; + + thermal-zone4 { + status = "okay"; + }; + + thermal-zone5 { + status = "okay"; + }; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree nodes for ls1046 * * Copyright 2015-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &soc { --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds-sdk.dts @@ -0,0 +1,268 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2014-2015 Freescale Semiconductor, Inc. + * + * Mingkai Hu + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "fsl-ls1046a-qds.dts" +#include "qoriq-qman-portals-sdk.dtsi" +#include "qoriq-bman-portals-sdk.dtsi" + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&soc { +/delete-property/ dma-coherent; + +#include "qoriq-dpaa-eth.dtsi" +#include "qoriq-fman3-0-6oh.dtsi" + +pcie@3400000 { + /delete-property/ iommu-map; +}; + +pcie@3500000 { + /delete-property/ iommu-map; +}; + +pcie@3600000 { + /delete-property/ iommu-map; +}; + +/delete-node/ iommu@9000000; +}; + +&fsldpaa { + ethernet@9 { + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet7>; + dma-coherent; + }; +}; + +&fman0 { + compatible = "fsl,fman", "simple-bus"; + dma-coherent; +}; + +&clockgen { + dma-coherent; +}; + +&scfg { + dma-coherent; +}; + +&crypto { + dma-coherent; +}; + +&dcfg { + dma-coherent; +}; + +&ifc { + dma-coherent; +}; + +&qspi { + dma-coherent; +}; + +&esdhc { + dma-coherent; +}; + +&ddr { + dma-coherent; +}; + +&tmu { + dma-coherent; +}; + +&qman { + dma-coherent; +}; + +&bman { + dma-coherent; +}; + +&bportals { + dma-coherent; +}; + +&qportals { + dma-coherent; +}; + +&dspi { + dma-coherent; +}; + +&i2c0 { + dma-coherent; +}; + +&i2c1 { + dma-coherent; +}; + +&i2c2 { + dma-coherent; +}; + +&i2c3 { + dma-coherent; +}; + +&duart0 { + dma-coherent; +}; + +&duart1 { + dma-coherent; +}; + +&duart2 { + dma-coherent; +}; + +&duart3 { + dma-coherent; +}; + +&gpio0 { + dma-coherent; +}; + +&gpio1 { + dma-coherent; +}; + +&gpio2 { + dma-coherent; +}; + +&gpio3 { + dma-coherent; +}; + +&lpuart0 { + dma-coherent; +}; + +&lpuart1 { + dma-coherent; +}; + +&lpuart2 { + dma-coherent; +}; + +&lpuart3 { + dma-coherent; +}; + +&lpuart4 { + dma-coherent; +}; + +&lpuart5 { + dma-coherent; +}; + +&ftm0 { + dma-coherent; +}; + +&wdog0 { + dma-coherent; +}; + +&edma0 { + dma-coherent; +}; + +&sata { + dma-coherent; +}; + +&qdma { + dma-coherent; +}; + +&msi1 { + dma-coherent; +}; + +&msi2 { + dma-coherent; +}; + +&msi3 { + dma-coherent; +}; + +&ptp_timer0 { + dma-coherent; +}; + +&serdes1 { + dma-coherent; +}; + +&fsldpaa { + dma-coherent; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Shaohui Xie - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -61,6 +24,20 @@ serial1 = &duart1; serial2 = &duart2; serial3 = &duart3; + + emi1_slot1 = &ls1046mdio_s1; + emi1_slot2 = &ls1046mdio_s2; + emi1_slot4 = &ls1046mdio_s4; + + sgmii_s1_p1 = &sgmii_phy_s1_p1; + sgmii_s1_p2 = &sgmii_phy_s1_p2; + sgmii_s1_p3 = &sgmii_phy_s1_p3; + sgmii_s1_p4 = &sgmii_phy_s1_p4; + sgmii_s4_p1 = &sgmii_phy_s4_p1; + qsgmii_s2_p1 = &qsgmii_phy_s2_p1; + qsgmii_s2_p2 = &qsgmii_phy_s2_p2; + qsgmii_s2_p3 = &qsgmii_phy_s2_p3; + qsgmii_s2_p4 = &qsgmii_phy_s2_p4; }; chosen { @@ -188,8 +165,9 @@ }; fpga: board-control@2,0 { - compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis"; + compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-bus"; reg = <0x2 0x0 0x0000100>; + ranges = <0 2 0 0x100>; }; }; @@ -206,9 +184,145 @@ compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; }; #include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy_s2_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&sgmii_phy_s4_p1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&sgmii_phy_s1_p3>; + phy-connection-type = "sgmii"; + }; + + ethernet@ea000 { + phy-handle = <&sgmii_phy_s1_p4>; + phy-connection-type = "sgmii"; + }; + + ethernet@f0000 { /* DTSEC9/10GEC1 */ + phy-handle = <&sgmii_phy_s1_p1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { /* DTSEC10/10GEC2 */ + phy-handle = <&sgmii_phy_s1_p2>; + phy-connection-type = "xgmii"; + }; +}; + +&fpga { + #address-cells = <1>; + #size-cells = <1>; + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1 */ + + /* On-board RGMII1 PHY */ + ls1046mdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { /* MAC3 */ + reg = <0x1>; + }; + }; + + /* On-board RGMII2 PHY */ + ls1046mdio1: mdio@1 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { /* MAC4 */ + reg = <0x2>; + }; + }; + + /* Slot 1 */ + ls1046mdio_s1: mdio@2 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s1_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + + sgmii_phy_s1_p2: ethernet-phy@1d { + reg = <0x1d>; + }; + + sgmii_phy_s1_p3: ethernet-phy@1e { + reg = <0x1e>; + }; + + sgmii_phy_s1_p4: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + /* Slot 2 */ + ls1046mdio_s2: mdio@3 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + qsgmii_phy_s2_p1: ethernet-phy@8 { + reg = <0x8>; + }; + qsgmii_phy_s2_p2: ethernet-phy@9 { + reg = <0x9>; + }; + qsgmii_phy_s2_p3: ethernet-phy@a { + reg = <0xa>; + }; + qsgmii_phy_s2_p4: ethernet-phy@b { + reg = <0xb>; + }; + }; + + /* Slot 4 */ + ls1046mdio_s4: mdio@5 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sgmii_phy_s4_p1: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + }; +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-sdk.dts @@ -0,0 +1,307 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2014-2015 Freescale Semiconductor, Inc. + * + * Mingkai Hu + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "fsl-ls1046a-rdb.dts" +#include "qoriq-qman-portals-sdk.dtsi" +#include "qoriq-bman-portals-sdk.dtsi" + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&soc { +/delete-property/ dma-coherent; + +#include "qoriq-dpaa-eth.dtsi" +#include "qoriq-fman3-0-6oh.dtsi" + +pcie@3400000 { + /delete-property/ iommu-map; +}; + +pcie@3500000 { + /delete-property/ iommu-map; +}; + +pcie@3600000 { + /delete-property/ iommu-map; +}; + +/delete-node/ iommu@9000000; +}; + +&fsldpaa { + ethernet@0 { + status = "disabled"; + }; + ethernet@1 { + status = "disabled"; + }; + ethernet@9 { + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet7>; + dma-coherent; + }; +}; + +&fman0 { + compatible = "fsl,fman", "simple-bus"; +}; + +&mdio9 { + pcsphy6: ethernet-phy@0 { + backplane-mode = "10gbase-kr"; + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0x8C0 0x40>; /* lane D */ + }; +}; + +&mdio10 { + pcsphy7: ethernet-phy@0 { + backplane-mode = "10gbase-kr"; + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0x880 0x40>; /* lane C */ + }; +}; + +/* Update MAC connections to backplane PHYs + * &mac9 { + * phy-handle = <&pcsphy6>; + *}; + * + *&mac10 { + * phy-handle = <&pcsphy7>; + *}; +*/ + +&clockgen { + dma-coherent; +}; + +&scfg { + dma-coherent; +}; + +&crypto { + dma-coherent; +}; + +&dcfg { + dma-coherent; +}; + +&ifc { + dma-coherent; +}; + +&qspi { + dma-coherent; +}; + +&esdhc { + dma-coherent; +}; + +&ddr { + dma-coherent; +}; + +&tmu { + dma-coherent; +}; + +&qman { + dma-coherent; +}; + +&bman { + dma-coherent; +}; + +&bportals { + dma-coherent; +}; + +&qportals { + dma-coherent; +}; + +&dspi { + dma-coherent; +}; + +&i2c0 { + dma-coherent; +}; + +&i2c1 { + dma-coherent; +}; + +&i2c2 { + dma-coherent; +}; + +&i2c3 { + dma-coherent; +}; + +&duart0 { + dma-coherent; +}; + +&duart1 { + dma-coherent; +}; + +&duart2 { + dma-coherent; +}; + +&duart3 { + dma-coherent; +}; + +&gpio0 { + dma-coherent; +}; + +&gpio1 { + dma-coherent; +}; + +&gpio2 { + dma-coherent; +}; + +&gpio3 { + dma-coherent; +}; + +&lpuart0 { + dma-coherent; +}; + +&lpuart1 { + dma-coherent; +}; + +&lpuart2 { + dma-coherent; +}; + +&lpuart3 { + dma-coherent; +}; + +&lpuart4 { + dma-coherent; +}; + +&lpuart5 { + dma-coherent; +}; + +&ftm0 { + dma-coherent; +}; + +&wdog0 { + dma-coherent; +}; + +&edma0 { + dma-coherent; +}; + +&sata { + dma-coherent; +}; + +&qdma { + dma-coherent; +}; + +&msi1 { + dma-coherent; +}; + +&msi2 { + dma-coherent; +}; + +&msi3 { + dma-coherent; +}; + +&fman0 { + dma-coherent; +}; + +&ptp_timer0 { + dma-coherent; +}; + +&serdes1 { + dma-coherent; +}; + +&fsldpaa { + dma-coherent; +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb-usdpaa.dts @@ -0,0 +1,133 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright (C) 2016, Freescale Semiconductor + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include "fsl-ls1046a-rdb-sdk.dts" + +&soc { + bp7: buffer-pool@7 { + compatible = "fsl,ls1046a-bpool", "fsl,bpool"; + fsl,bpid = <7>; + fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>; + fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>; + dma-coherent; + }; + + bp8: buffer-pool@8 { + compatible = "fsl,ls1046a-bpool", "fsl,bpool"; + fsl,bpid = <8>; + fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>; + fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>; + dma-coherent; + }; + + bp9: buffer-pool@9 { + compatible = "fsl,ls1046a-bpool", "fsl,bpool"; + fsl,bpid = <9>; + fsl,bpool-ethernet-cfg = <0 0 0 2048 0 0xfeedabba>; + fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>; + dma-coherent; + }; + + fsl,dpaa { + compatible = "fsl,ls1046a", "fsl,dpaa", "simple-bus"; + dma-coherent; + + ethernet@2 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x54 1 0x55 1>; + fsl,qman-frame-queues-tx = <0x74 1 0x75 1>; + }; + + ethernet@3 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x56 1 0x57 1>; + fsl,qman-frame-queues-tx = <0x76 1 0x77 1>; + }; + + ethernet@4 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x58 1 0x59 1>; + fsl,qman-frame-queues-tx = <0x78 1 0x79 1>; + }; + + ethernet@5 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x5a 1 0x5b 1>; + fsl,qman-frame-queues-tx = <0x7a 1 0x7b 1>; + }; + + ethernet@8 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>; + fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>; + }; + + ethernet@9 { + compatible = "fsl,dpa-ethernet-init"; + fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>; + fsl,qman-frame-queues-rx = <0x5e 1 0x5f 1>; + fsl,qman-frame-queues-tx = <0x7e 1 0x7f 1>; + }; + + dpa-fman0-oh@2 { + compatible = "fsl,dpa-oh"; + /* Define frame queues for the OH port*/ + /* */ + fsl,qman-frame-queues-oh = <0x60 1 0x61 1>; + fsl,fman-oh-port = <&fman0_oh2>; + }; + }; + + pcie@3400000 { + /delete-property/ iommu-map; + }; + + pcie@3500000 { + /delete-property/ iommu-map; + }; + + pcie@3600000 { + /delete-property/ iommu-map; + }; + + /delete-node/ iommu@9000000; +}; +/ { + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* For legacy usdpaa based use-cases, update the size and + alignment parameters. e.g. to allocate 256 MB memory: + size = <0 0x10000000>; + alignment = <0 0x10000000>; + */ + usdpaa_mem: usdpaa_mem { + compatible = "fsl,usdpaa-mem"; + alloc-ranges = <0 0 0x10000 0>; + size = <0 0x1000>; + alignment = <0 0x1000>; + }; + }; +}; + +&fman0 { + fman0_oh2: port@83000 { + cell-index = <1>; + compatible = "fsl,fman-port-oh"; + reg = <0x83000 0x1000>; + }; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Mingkai Hu - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -139,21 +102,26 @@ num-cs = <2>; bus-num = <0>; status = "okay"; + fsl,qspi-has-second-chip; qflash0: s25fs512s@0 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; qflash1: s25fs512s@1 { compatible = "spansion,m25p80"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; reg = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; }; --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-1046A family SoC. * * Copyright 2016 Freescale Semiconductor, Inc. * * Mingkai Hu - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include @@ -70,7 +33,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu0: cpu@0 { + cooling_map0: cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x0>; @@ -122,7 +85,7 @@ CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; idle-state-name = "PH20"; - arm,psci-suspend-param = <0x00010000>; + arm,psci-suspend-param = <0x0>; entry-latency-us = <1000>; exit-latency-us = <1000>; min-residency-us = <3000>; @@ -188,6 +151,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + dma-coherent; ddr: memory-controller@1080000 { compatible = "fsl,qoriq-memory-controller"; @@ -214,7 +179,6 @@ clock-names = "qspi_en", "qspi"; clocks = <&clockgen 4 1>, <&clockgen 4 1>; big-endian; - fsl,qspi-has-second-chip; status = "disabled"; }; @@ -229,6 +193,49 @@ bus-width = <4>; }; + smmu: iommu@9000000 { + compatible = "arm,mmu-500"; + reg = <0 0x9000000 0 0x400000>; + dma-coherent; + stream-match-mask = <0x7f00>; + #global-interrupts = <2>; + #iommu-cells = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + scfg: scfg@1570000 { compatible = "fsl,ls1046a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; @@ -304,7 +311,7 @@ dcfg: dcfg@1ee0000 { compatible = "fsl,ls1046a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; }; @@ -362,36 +369,7 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 3>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; + #include "fsl-tmu.dtsi" dspi: dspi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; @@ -407,7 +385,7 @@ }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,vf610-i2c", "fsl,ls1046a-vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; @@ -416,6 +394,7 @@ dmas = <&edma0 1 39>, <&edma0 1 38>; dma-names = "tx", "rx"; + scl-gpios = <&gpio3 12 0>; status = "disabled"; }; @@ -440,12 +419,13 @@ }; i2c3: i2c@21b0000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,vf610-i2c", "fsl,ls1046a-vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x21b0000 0x0 0x10000>; interrupts = ; clocks = <&clockgen 4 1>; + scl-gpios = <&gpio3 12 0>; status = "disabled"; }; @@ -571,6 +551,15 @@ status = "disabled"; }; + ftm0: ftm0@29d0000 { + compatible = "fsl,ls1046a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>, + <0x0 0x1ee2140 0x0 0x4>; + reg-names = "ftm", "pmctrl"; + interrupts = ; + big-endian; + }; + wdog0: watchdog@2ad0000 { compatible = "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; @@ -595,40 +584,81 @@ <&clockgen 4 1>; }; - usb0: usb@2f00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x2f00000 0x0 0x10000>; - interrupts = ; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - }; - - usb1: usb@3000000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3000000 0x0 0x10000>; - interrupts = ; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - }; - - usb2: usb@3100000 { - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = ; - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - }; - - sata: sata@3200000 { - compatible = "fsl,ls1046a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>, - <0x0 0x20140520 0x0 0x4>; - reg-names = "ahci", "sata-ecc"; - interrupts = ; - clocks = <&clockgen 4 1>; + aux_bus: aux_bus { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; + + usb0: usb@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,dis-u1u2-when-u3-quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + }; + + usb1: usb@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,dis-u1u2-when-u3-quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + }; + + usb2: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + usb3-lpm-capable; + snps,dis-u1u2-when-u3-quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1046a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = ; + clocks = <&clockgen 4 1>; + }; + }; + + qdma: qdma@8380000 { + compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = <0 153 0x4>, + <0 39 0x4>, + <0 40 0x4>, + <0 41 0x4>, + <0 42 0x4>; + interrupt-names = "qdma-error", "qdma-queue0", + "qdma-queue1", "qdma-queue2", "qdma-queue3"; + channels = <8>; + block-number = <1>; + block-offset = <0x10000>; + queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + big-endian; }; msi1: msi-controller@1580000 { @@ -661,6 +691,125 @@ ; }; + pcie@3400000 { + compatible = "fsl,ls1046a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = , /* PME interrupt */ + ; /* aer interrupt */ + interrupt-names = "pme", "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + iommu-map = <0 &smmu 0 1>; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi1>, <&msi2>, <&msi3>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie_ep@3400000 { + compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + reg = <0x00 0x03400000 0x0 0x00100000 + 0x40 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <8>; + num-lanes = <2>; + status = "disabled"; + }; + + pcie@3500000 { + compatible = "fsl,ls1046a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = , + ; + interrupt-names = "pme", "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + iommu-map = <0 &smmu 0 1>; + num-lanes = <2>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi1>, <&msi2>, <&msi3>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie_ep@3500000 { + compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep"; + reg = <0x00 0x03500000 0x0 0x00100000 + 0x48 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <8>; + num-lanes = <2>; + status = "disabled"; + }; + + pcie@3600000 { + compatible = "fsl,ls1046a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x50 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = , + ; + interrupt-names = "pme", "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + iommu-map = <0 &smmu 0 1>; + num-lanes = <2>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&msi1>, <&msi2>, <&msi3>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie_ep@3600000 { + compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"; + reg = <0x00 0x03600000 0x0 0x00100000 + 0x50 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <8>; + num-lanes = <2>; + status = "disabled"; + }; + + serdes1: serdes@1ea0000 { + reg = <0x0 0x1ea0000 0 0x00002000>; + compatible = "fsl,serdes-10g"; + }; + }; reserved-memory { @@ -689,7 +838,36 @@ no-map; }; }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; }; #include "qoriq-qman-portals.dtsi" #include "qoriq-bman-portals.dtsi" + +&thermal_zones { + thermal-zone0 { + status = "okay"; + }; + + thermal-zone1 { + status = "okay"; + }; + + thermal-zone2 { + status = "okay"; + }; + + thermal-zone3 { + status = "okay"; + }; + + thermal-zone4 { + status = "okay"; + }; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NXP LS1088A QDS Board. * @@ -5,43 +6,6 @@ * * Harninder Rai * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -134,6 +98,30 @@ }; }; +&qspi { + status = "okay"; + fsl,qspi-has-second-chip; + qflash0: s25fs512s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; + + qflash1: s25fs512s@1 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + &duart0 { status = "okay"; }; @@ -149,3 +137,29 @@ &sata { status = "okay"; }; + +&pcs_mdio1 { + pcs_phy1: ethernet-phy@0 { + backplane-mode = "10gbase-kr"; + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0x840 0x40>;/* lane B */ + }; +}; + +&pcs_mdio2 { + pcs_phy2: ethernet-phy@0 { + backplane-mode = "10gbase-kr"; + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0x800 0x40>;/* lane A */ + }; +}; + +/* Update DPMAC connections to backplane PHYs, under SerDes 0x1D_0xXX. + * &dpmac1 { + * phy-handle = <&pcs_phy1>; + * }; + */ --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for NXP LS1088A RDB Board. * @@ -5,43 +6,6 @@ * * Harninder Rai * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -110,6 +74,31 @@ }; }; +&qspi { + status = "okay"; + fsl,qspi-has-second-chip; + qflash0: s25fs512s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; + + qflash1: s25fs512s@1 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; + +}; + &duart0 { status = "okay"; }; @@ -118,6 +107,14 @@ status = "okay"; }; +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + &esdhc { status = "okay"; }; @@ -125,3 +122,82 @@ &sata { status = "okay"; }; + +&emdio1 { + /* Freescale F104 PHY1 */ + mdio1_phy1: emdio1_phy@1 { + reg = <0x1c>; + phy-connection-type = "qsgmii"; + }; + mdio1_phy2: emdio1_phy@2 { + reg = <0x1d>; + phy-connection-type = "qsgmii"; + }; + mdio1_phy3: emdio1_phy@3 { + reg = <0x1e>; + phy-connection-type = "qsgmii"; + }; + mdio1_phy4: emdio1_phy@4 { + reg = <0x1f>; + phy-connection-type = "qsgmii"; + }; + /* F104 PHY2 */ + mdio1_phy5: emdio1_phy@5 { + reg = <0x0c>; + phy-connection-type = "qsgmii"; + }; + mdio1_phy6: emdio1_phy@6 { + reg = <0x0d>; + phy-connection-type = "qsgmii"; + }; + mdio1_phy7: emdio1_phy@7 { + reg = <0x0e>; + phy-connection-type = "qsgmii"; + }; + mdio1_phy8: emdio1_phy@8 { + reg = <0x0f>; + phy-connection-type = "qsgmii"; + }; +}; + +&emdio2 { + /* Aquantia AQR105 10G PHY */ + mdio2_phy1: emdio2_phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 2 0x4>; + reg = <0x0>; + phy-connection-type = "xfi"; + }; +}; + +/* DPMAC connections to external PHYs + * based on LS1088A RM RevC - $24.1.2 SerDes Options + */ +/* DPMAC1 is 10G SFP+, fixed link */ +&dpmac2 { + phy-handle = <&mdio2_phy1>; +}; +&dpmac3 { + phy-handle = <&mdio1_phy5>; +}; +&dpmac4 { + phy-handle = <&mdio1_phy6>; +}; +&dpmac5 { + phy-handle = <&mdio1_phy7>; +}; +&dpmac6 { + phy-handle = <&mdio1_phy8>; +}; +&dpmac7 { + phy-handle = <&mdio1_phy1>; +}; +&dpmac8 { + phy-handle = <&mdio1_phy2>; +}; +&dpmac9 { + phy-handle = <&mdio1_phy3>; +}; +&dpmac10 { + phy-handle = <&mdio1_phy4>; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for NXP Layerscape-1088A family SoC. * @@ -5,43 +6,6 @@ * * Harninder Rai * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include #include @@ -61,7 +25,7 @@ #size-cells = <0>; /* We have 2 clusters having 4 Cortex-A53 cores each */ - cpu0: cpu@0 { + cooling_map0: cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; @@ -94,7 +58,7 @@ cpu-idle-states = <&CPU_PH20>; }; - cpu4: cpu@100 { + cooling_map1: cpu4: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x100>; @@ -130,7 +94,7 @@ CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; idle-state-name = "PH20"; - arm,psci-suspend-param = <0x00010000>; + arm,psci-suspend-param = <0x0>; entry-latency-us = <1000>; exit-latency-us = <1000>; min-residency-us = <3000>; @@ -147,6 +111,15 @@ <0x0 0x0c0d0000 0 0x1000>, /* GICH */ <0x0 0x0c0e0000 0 0x20000>; /* GICV */ interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x6020000 0 0x20000>; + }; }; timer { @@ -169,11 +142,31 @@ clock-output-names = "sysclk"; }; + dcfg: dcfg@1e00000 { + compatible = "fsl,ls1088a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + little-endian; + }; + + rstcr: syscon@1e60000 { + compatible = "fsl,ls1088a-rstcr", "syscon"; + reg = <0x0 0x1e60000 0x0 0x4>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&rstcr>; + offset = <0x0>; + mask = <0x02>; + }; + + soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; clockgen: clocking@1300000 { compatible = "fsl,ls1088a-clockgen"; @@ -229,43 +222,7 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_alert>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; + #include "fsl-tmu.dtsi" duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; @@ -283,6 +240,62 @@ status = "disabled"; }; + cluster1_core0_watchdog: wdt@c000000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core1_watchdog: wdt@c010000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core2_watchdog: wdt@c020000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc020000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core3_watchdog: wdt@c030000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc030000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core0_watchdog: wdt@c100000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc100000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core1_watchdog: wdt@c110000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc110000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core2_watchdog: wdt@c120000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc120000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core3_watchdog: wdt@c130000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc130000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + gpio0: gpio@2300000 { compatible = "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; @@ -323,6 +336,72 @@ #interrupt-cells = <2>; }; + /* TODO: WRIOP (CCSR?) */ + emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000, + * E-MDIO1: 0x1_6000 + */ + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8B96000 0x0 0x1000>; + device_type = "mdio"; + little-endian; /* force the driver in LE mode */ + + /* Not necessary on the QDS, but needed on the RDB */ + #address-cells = <1>; + #size-cells = <0>; + }; + + emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000, + * E-MDIO2: 0x1_7000 + */ + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8B97000 0x0 0x1000>; + device_type = "mdio"; + little-endian; /* force the driver in LE mode */ + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio1: mdio@0x8c07000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c07000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio2: mdio@0x8c0b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0b000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio3: mdio@0x8c0f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0f000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio4: mdio@0x8c13000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c13000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + ifc: ifc@2240000 { compatible = "fsl,ifc", "simple-bus"; reg = <0x0 0x2240000 0x0 0x20000>; @@ -333,13 +412,22 @@ status = "disabled"; }; + ftm0: ftm0@2800000 { + compatible = "fsl,ls1088a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>, + <0x0 0x1e34050 0x0 0x4>; + reg-names = "ftm", "pmctrl"; + interrupts = <0 44 4>; + }; + i2c0: i2c@2000000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,vf610-i2c", "fsl,ls1088a-vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; + scl-gpios = <&gpio3 30 0>; status = "disabled"; }; @@ -349,7 +437,7 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; status = "disabled"; }; @@ -359,7 +447,7 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; status = "disabled"; }; @@ -369,7 +457,7 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; status = "disabled"; }; @@ -385,6 +473,28 @@ status = "disabled"; }; + usb0: usb3@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 0x4>; /* Level high type */ + dr_mode = "host"; + configure-gfladj; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + }; + + usb1: usb3@3110000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 0x4>; /* Level high type */ + dr_mode = "host"; + configure-gfladj; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + }; + sata: sata@3200000 { compatible = "fsl,ls1088a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>, @@ -395,6 +505,17 @@ dma-coherent; status = "disabled"; }; + qspi: quadspi@20c0000 { + compatible = "fsl,ls2080a-qspi", "fsl,ls1088a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "qspi_en", "qspi"; + }; crypto: crypto@8000000 { compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; @@ -434,6 +555,267 @@ interrupts = ; }; }; + + pcie@3400000 { + compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie@3500000 { + compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie@3600000 { + compatible = "fsl,ls1088a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <8>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + msi-parent = <&its>; + iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ + dma-coherent; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <1>; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <2>; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <3>; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <4>; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <5>; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <6>; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <7>; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <8>; + }; + + dpmac9: dpmac@9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <9>; + }; + + dpmac10: dpmac@a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + }; + }; + }; + + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #global-interrupts = <12>; + #iommu-cells = <1>; + stream-match-mask = <0x7C00>; + interrupts = <0 13 4>, /* global secure fault */ + <0 14 4>, /* combined secure interrupt */ + <0 15 4>, /* global non-secure fault */ + <0 16 4>, /* combined non-secure interrupt */ + /* performance counter interrupts 0-7 */ + <0 211 4>, + <0 212 4>, + <0 213 4>, + <0 214 4>, + <0 215 4>, + <0 216 4>, + <0 217 4>, + <0 218 4>, + /* per context interrupt, 64 interrupts */ + <0 146 4>, + <0 147 4>, + <0 148 4>, + <0 149 4>, + <0 150 4>, + <0 151 4>, + <0 152 4>, + <0 153 4>, + <0 154 4>, + <0 155 4>, + <0 156 4>, + <0 157 4>, + <0 158 4>, + <0 159 4>, + <0 160 4>, + <0 161 4>, + <0 162 4>, + <0 163 4>, + <0 164 4>, + <0 165 4>, + <0 166 4>, + <0 167 4>, + <0 168 4>, + <0 169 4>, + <0 170 4>, + <0 171 4>, + <0 172 4>, + <0 173 4>, + <0 174 4>, + <0 175 4>, + <0 176 4>, + <0 177 4>, + <0 178 4>, + <0 179 4>, + <0 180 4>, + <0 181 4>, + <0 182 4>, + <0 183 4>, + <0 184 4>, + <0 185 4>, + <0 186 4>, + <0 187 4>, + <0 188 4>, + <0 189 4>, + <0 190 4>, + <0 191 4>, + <0 192 4>, + <0 193 4>, + <0 194 4>, + <0 195 4>, + <0 196 4>, + <0 197 4>, + <0 198 4>, + <0 199 4>, + <0 200 4>, + <0 201 4>, + <0 202 4>, + <0 203 4>, + <0 204 4>, + <0 205 4>, + <0 206 4>, + <0 207 4>, + <0 208 4>, + <0 209 4>; + }; + + serdes1: serdes@1ea0000 { + compatible = "fsl,serdes-10g"; + reg = <0x0 0x1ea0000 0 0x00002000>; + little-endian; + }; }; + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +#include "fsl-tmu-map1.dtsi" + +&thermal_zones { + thermal-zone0 { + status = "okay"; + }; + + thermal-zone1 { + status = "okay"; + }; }; --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a QDS Board. * @@ -7,43 +8,6 @@ * Abhimanyu Saini * Bhupesh Sharma * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -59,3 +23,65 @@ stdout-path = "serial0:115200n8"; }; }; + +&ifc { + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus"; + reg = <3 0 0x300>; /* TODO check address */ + ranges = <0 3 0 0x300>; + + mdio_mux_emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&emdio1>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1_MDIO */ + + #address-cells=<1>; + #size-cells = <0>; + + /* Child MDIO buses, one for each riser card: + * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0. + * VSC8234 PHYs on the riser cards. + */ + + mdio_mux3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + mdio0_phy12: mdio_phy0@1c { + reg = <0x1c>; + phy-connection-type = "sgmii"; + }; + mdio0_phy13: mdio_phy1@1d { + reg = <0x1d>; + phy-connection-type = "sgmii"; + }; + mdio0_phy14: mdio_phy2@1e { + reg = <0x1e>; + phy-connection-type = "sgmii"; + }; + mdio0_phy15: mdio_phy3@1f { + reg = <0x1f>; + phy-connection-type = "sgmii"; + }; + }; + }; + }; +}; + +/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */ +&dpmac9 { + phy-handle = <&mdio0_phy12>; +}; +&dpmac10 { + phy-handle = <&mdio0_phy13>; +}; +&dpmac11 { + phy-handle = <&mdio0_phy14>; +}; +&dpmac12 { + phy-handle = <&mdio0_phy15>; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a RDB Board. * @@ -7,43 +8,6 @@ * Abhimanyu Saini * Bhupesh Sharma * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -59,3 +23,83 @@ stdout-path = "serial1:115200n8"; }; }; + +&emdio1 { + status = "disabled"; + /* CS4340 PHYs */ + mdio1_phy1: emdio1_phy@1 { + reg = <0x10>; + phy-connection-type = "xfi"; + }; + mdio1_phy2: emdio1_phy@2 { + reg = <0x11>; + phy-connection-type = "xfi"; + }; + mdio1_phy3: emdio1_phy@3 { + reg = <0x12>; + phy-connection-type = "xfi"; + }; + mdio1_phy4: emdio1_phy@4 { + reg = <0x13>; + phy-connection-type = "xfi"; + }; +}; + +&emdio2 { + /* AQR405 PHYs */ + mdio2_phy1: emdio2_phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 1 0x4>; /* Level high type */ + reg = <0x0>; + phy-connection-type = "xfi"; + }; + mdio2_phy2: emdio2_phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 2 0x4>; /* Level high type */ + reg = <0x1>; + phy-connection-type = "xfi"; + }; + mdio2_phy3: emdio2_phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 4 0x4>; /* Level high type */ + reg = <0x2>; + phy-connection-type = "xfi"; + }; + mdio2_phy4: emdio2_phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 5 0x4>; /* Level high type */ + reg = <0x3>; + phy-connection-type = "xfi"; + }; +}; + +/* Update DPMAC connections to external PHYs, under the assumption of + * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board. + */ +/* Leave Cortina nodes commented out until driver is integrated + *&dpmac1 { + * phy-handle = <&mdio1_phy1>; + *}; + *&dpmac2 { + * phy-handle = <&mdio1_phy2>; + *}; + *&dpmac3 { + * phy-handle = <&mdio1_phy3>; + *}; + *&dpmac4 { + * phy-handle = <&mdio1_phy4>; + *}; + */ + +&dpmac5 { + phy-handle = <&mdio2_phy1>; +}; +&dpmac6 { + phy-handle = <&mdio2_phy2>; +}; +&dpmac7 { + phy-handle = <&mdio2_phy3>; +}; +&dpmac8 { + phy-handle = <&mdio2_phy4>; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080a software Simulator model * @@ -5,43 +6,6 @@ * * Bhupesh Sharma * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * @@ -6,49 +7,12 @@ * Abhimanyu Saini * Bhupesh Sharma * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "fsl-ls208xa.dtsi" &cpu { - cpu0: cpu@0 { + cooling_map0: cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0>; @@ -67,7 +31,7 @@ next-level-cache = <&cluster0_l2>; }; - cpu2: cpu@100 { + cooling_map1: cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x100>; @@ -86,7 +50,7 @@ next-level-cache = <&cluster1_l2>; }; - cpu4: cpu@200 { + cooling_map2: cpu4: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x200>; @@ -105,7 +69,7 @@ next-level-cache = <&cluster2_l2>; }; - cpu6: cpu@300 { + cooling_map3: cpu6: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x300>; @@ -150,6 +114,10 @@ }; }; +&timer { + fsl,erratum-a008585; +}; + &pcie1 { reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x10 0x00000000 0x0 0x00002000>; /* configuration space */ --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts @@ -0,0 +1,163 @@ +/* + * Device Tree file for NXP LS2081A RDB Board. + * + * Copyright 2017 NXP + * + * Priyanka Jain + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls2088a.dtsi" + +/ { + model = "NXP Layerscape 2081A RDB Board"; + compatible = "fsl,ls2081a-rdb", "fsl,ls2081a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&esdhc { + status = "okay"; +}; + +&ifc { + status = "disabled"; +}; + +&i2c0 { + status = "okay"; + pca9547@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01>; + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&dspi { + status = "okay"; + dflash0: n25q512a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <0>; + }; +}; + +&qspi { + status = "okay"; + fsl,qspi-has-second-chip; + flash0: s25fs512s@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + spi-max-frequency = <20000000>; + reg = <0>; + }; + flash1: s25fs512s@1 { + #address-cells = <1>; + #size-cells = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + compatible = "spansion,m25p80"; + spi-max-frequency = <20000000>; + reg = <1>; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2088A QDS Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -58,3 +22,123 @@ stdout-path = "serial0:115200n8"; }; }; + +&ifc { + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus"; + reg = <3 0 0x300>; /* TODO check address */ + ranges = <0 3 0 0x300>; + + mdio_mux_emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&emdio1>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1_MDIO */ + + #address-cells=<1>; + #size-cells = <0>; + + /* Child MDIO buses, one for each riser card: + * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0. + * VSC8234 PHYs on the riser cards. + */ + + mdio_mux3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + mdio0_phy12: mdio_phy0@1c { + reg = <0x1c>; + phy-connection-type = "sgmii"; + }; + mdio0_phy13: mdio_phy1@1d { + reg = <0x1d>; + phy-connection-type = "sgmii"; + }; + mdio0_phy14: mdio_phy2@1e { + reg = <0x1e>; + phy-connection-type = "sgmii"; + }; + mdio0_phy15: mdio_phy3@1f { + reg = <0x1f>; + phy-connection-type = "sgmii"; + }; + }; + }; + }; +}; + +&pcs_mdio1 { + pcs_phy1: ethernet-phy@0 { + backplane-mode = "10gbase-kr"; + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0x9C0 0x40>;/* lane H */ + }; +}; + +&pcs_mdio2 { + pcs_phy2: ethernet-phy@0 { + backplane-mode = "10gbase-kr"; + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0x980 0x40>;/* lane G */ + }; +}; + +&pcs_mdio3 { + pcs_phy3: ethernet-phy@0 { + backplane-mode = "10gbase-kr"; + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0x940 0x40>;/* lane F */ + }; +}; + +&pcs_mdio4 { + pcs_phy4: ethernet-phy@0 { + backplane-mode = "10gbase-kr"; + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0x900 0x40>;/* lane E */ + }; +}; + +/* Update DPMAC connections to backplane PHYs, under SerDes 0x2a_0xXX. + * &dpmac1 { + * phy-handle = <&pcs_phy1>; + * }; + * + * &dpmac2 { + * phy-handle = <&pcs_phy2>; + * }; + * + * &dpmac3 { + * phy-handle = <&pcs_phy3>; + * }; + * + * &dpmac4 { + * phy-handle = <&pcs_phy4>; + * }; + */ + +/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */ +&dpmac9 { + phy-handle = <&mdio0_phy12>; +}; +&dpmac10 { + phy-handle = <&mdio0_phy13>; +}; +&dpmac11 { + phy-handle = <&mdio0_phy14>; +}; +&dpmac12 { + phy-handle = <&mdio0_phy15>; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2088A RDB Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -58,3 +22,83 @@ stdout-path = "serial1:115200n8"; }; }; + +&emdio1 { + status = "disabled"; + /* CS4340 PHYs */ + mdio1_phy1: emdio1_phy@1 { + reg = <0x10>; + phy-connection-type = "xfi"; + }; + mdio1_phy2: emdio1_phy@2 { + reg = <0x11>; + phy-connection-type = "xfi"; + }; + mdio1_phy3: emdio1_phy@3 { + reg = <0x12>; + phy-connection-type = "xfi"; + }; + mdio1_phy4: emdio1_phy@4 { + reg = <0x13>; + phy-connection-type = "xfi"; + }; +}; + +&emdio2 { + /* AQR405 PHYs */ + mdio2_phy1: emdio2_phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 1 0x4>; /* Level high type */ + reg = <0x0>; + phy-connection-type = "xfi"; + }; + mdio2_phy2: emdio2_phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 2 0x4>; /* Level high type */ + reg = <0x1>; + phy-connection-type = "xfi"; + }; + mdio2_phy3: emdio2_phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 4 0x4>; /* Level high type */ + reg = <0x2>; + phy-connection-type = "xfi"; + }; + mdio2_phy4: emdio2_phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts = <0 5 0x4>; /* Level high type */ + reg = <0x3>; + phy-connection-type = "xfi"; + }; +}; + +/* Update DPMAC connections to external PHYs, under the assumption of + * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board. + */ +/* Leave Cortina PHYs commented out until proper driver is integrated + *&dpmac1 { + * phy-handle = <&mdio1_phy1>; + *}; + *&dpmac2 { + * phy-handle = <&mdio1_phy2>; + *}; + *&dpmac3 { + * phy-handle = <&mdio1_phy3>; + *}; + *&dpmac4 { + * phy-handle = <&mdio1_phy4>; + *}; + */ + +&dpmac5 { + phy-handle = <&mdio2_phy1>; +}; +&dpmac6 { + phy-handle = <&mdio2_phy2>; +}; +&dpmac7 { + phy-handle = <&mdio2_phy3>; +}; +&dpmac8 { + phy-handle = <&mdio2_phy4>; +}; --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2088A family SoC. * @@ -6,49 +7,12 @@ * * Abhimanyu Saini * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "fsl-ls208xa.dtsi" &cpu { - cpu0: cpu@0 { + cooling_map0: cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x0>; @@ -67,7 +31,7 @@ next-level-cache = <&cluster0_l2>; }; - cpu2: cpu@100 { + cooling_map1: cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x100>; @@ -86,7 +50,7 @@ next-level-cache = <&cluster1_l2>; }; - cpu4: cpu@200 { + cooling_map2: cpu4: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x200>; @@ -105,7 +69,7 @@ next-level-cache = <&cluster2_l2>; }; - cpu6: cpu@300 { + cooling_map3: cpu6: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x300>; @@ -143,7 +107,7 @@ CPU_PW20: cpu-pw20 { compatible = "arm,idle-state"; idle-state-name = "PW20"; - arm,psci-suspend-param = <0x00010000>; + arm,psci-suspend-param = <0x0>; entry-latency-us = <2000>; exit-latency-us = <2000>; min-residency-us = <6000>; @@ -151,6 +115,7 @@ }; &pcie1 { + compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -159,6 +124,7 @@ }; &pcie2 { + compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -167,6 +133,7 @@ }; &pcie3 { + compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ @@ -175,6 +142,7 @@ }; &pcie4 { + compatible = "fsl,ls2088a-pcie", "snps,dw-pcie"; reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ 0x38 0x00000000 0x0 0x00002000>; /* configuration space */ --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080A QDS Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &esdhc { @@ -165,16 +129,21 @@ &qspi { status = "okay"; + fsl,qspi-has-second-chip; flash0: s25fl256s1@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; spi-max-frequency = <20000000>; reg = <0>; }; flash2: s25fl256s1@2 { #address-cells = <1>; #size-cells = <1>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; compatible = "st,m25p80"; spi-max-frequency = <20000000>; reg = <0>; --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Freescale LS2080A RDB Board. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ &esdhc { @@ -85,6 +49,7 @@ reg = <0x75>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-never-disable; i2c@1 { #address-cells = <1>; #size-cells = <0>; @@ -95,6 +60,17 @@ }; }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + i2c@3 { #address-cells = <1>; #size-cells = <0>; @@ -132,7 +108,15 @@ }; &qspi { - status = "disabled"; + status = "okay"; + flash0: s25fs512s@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + m25p,fast-read; + spi-max-frequency = <20000000>; + reg = <0>; + }; }; &sata0 { --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * @@ -6,43 +7,6 @@ * * Abhimanyu Saini * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include @@ -111,13 +75,12 @@ mask = <0x2>; }; - timer { + timer: timer { compatible = "arm,armv8-timer"; interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ <1 14 4>, /* Physical Non-Secure PPI, active-low */ <1 11 4>, /* Virtual PPI, active-low */ <1 10 4>; /* Hypervisor PPI, active-low */ - fsl,erratum-a008585; }; pmu { @@ -135,6 +98,7 @@ #address-cells = <2>; #size-cells = <2>; ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; clockgen: clocking@1300000 { compatible = "fsl,ls2080a-clockgen"; @@ -194,54 +158,7 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 4>; - - trips { - cpu_alert: cpu-alert { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <85000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert>; - cooling-device = - <&cpu2 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map2 { - trip = <&cpu_alert>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map3 { - trip = <&cpu_alert>; - cooling-device = - <&cpu6 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; + #include "fsl-tmu.dtsi" serial0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; @@ -357,6 +274,8 @@ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ msi-parent = <&its>; + iommu-map = <0 &smmu 0 0>; /* This is fixed-up by u-boot */ + dma-coherent; #address-cells = <3>; #size-cells = <1>; @@ -460,6 +379,8 @@ compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; #global-interrupts = <12>; + #iommu-cells = <1>; + stream-match-mask = <0x7C00>; interrupts = <0 13 4>, /* global secure fault */ <0 14 4>, /* combined secure interrupt */ <0 15 4>, /* global non-secure fault */ @@ -502,7 +423,6 @@ <0 204 4>, <0 205 4>, <0 206 4>, <0 207 4>, <0 208 4>, <0 209 4>; - mmu-masters = <&fsl_mc 0x300 0>; }; dspi: dspi@2100000 { @@ -574,15 +494,126 @@ #interrupt-cells = <2>; }; + /* TODO: WRIOP (CCSR?) */ + emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000, + * E-MDIO1: 0x1_6000 + */ + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8B96000 0x0 0x1000>; + device_type = "mdio"; /* TODO: is this necessary? */ + little-endian; /* force the driver in LE mode */ + + /* Not necessary on the QDS, but needed on the RDB */ + #address-cells = <1>; + #size-cells = <0>; + }; + + emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000, + * E-MDIO2: 0x1_7000 + */ + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8B97000 0x0 0x1000>; + device_type = "mdio"; /* TODO: is this necessary? */ + little-endian; /* force the driver in LE mode */ + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio1: mdio@0x8c07000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c07000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio2: mdio@0x8c0b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0b000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio3: mdio@0x8c0f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0f000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio4: mdio@0x8c13000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c13000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio5: mdio@0x8c17000 { + status = "disabled"; + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c17000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio6: mdio@0x8c1b000 { + status = "disabled"; + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1b000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio7: mdio@0x8c1f000 { + status = "disabled"; + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1f000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio8: mdio@0x8c23000 { + status = "disabled"; + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c23000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + i2c0: i2c@2000000 { status = "disabled"; - compatible = "fsl,vf610-i2c"; + compatible = "fsl,vf610-i2c", "fsl,ls208xa-vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <0 34 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 1>; + scl-gpios = <&gpio3 10 0>; }; i2c1: i2c@2010000 { @@ -593,7 +624,7 @@ reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 1>; }; i2c2: i2c@2020000 { @@ -604,7 +635,7 @@ reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 1>; }; i2c3: i2c@2030000 { @@ -615,7 +646,7 @@ reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 0x4>; /* Level high type */ clock-names = "i2c"; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 1>; }; ifc: ifc@2240000 { @@ -648,8 +679,8 @@ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"; reg-names = "regs", "config"; - interrupts = <0 108 0x4>; /* Level high type */ - interrupt-names = "intr"; + interrupts = <0 108 0x4>; /* aer interrupt */ + interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -657,20 +688,22 @@ num-lanes = <4>; bus-range = <0x0 0xff>; msi-parent = <&its>; + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, <0000 0 0 2 &gic 0 0 0 110 4>, <0000 0 0 3 &gic 0 0 0 111 4>, <0000 0 0 4 &gic 0 0 0 112 4>; + status = "disabled"; }; pcie2: pcie@3500000 { compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"; reg-names = "regs", "config"; - interrupts = <0 113 0x4>; /* Level high type */ - interrupt-names = "intr"; + interrupts = <0 113 0x4>; /* aer interrupt */ + interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -678,20 +711,22 @@ num-lanes = <4>; bus-range = <0x0 0xff>; msi-parent = <&its>; + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, <0000 0 0 2 &gic 0 0 0 115 4>, <0000 0 0 3 &gic 0 0 0 116 4>, <0000 0 0 4 &gic 0 0 0 117 4>; + status = "disabled"; }; pcie3: pcie@3600000 { compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"; reg-names = "regs", "config"; - interrupts = <0 118 0x4>; /* Level high type */ - interrupt-names = "intr"; + interrupts = <0 118 0x4>; /* aer interrupt */ + interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -699,20 +734,22 @@ num-lanes = <8>; bus-range = <0x0 0xff>; msi-parent = <&its>; + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, <0000 0 0 2 &gic 0 0 0 120 4>, <0000 0 0 3 &gic 0 0 0 121 4>, <0000 0 0 4 &gic 0 0 0 122 4>; + status = "disabled"; }; pcie4: pcie@3700000 { compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"; reg-names = "regs", "config"; - interrupts = <0 123 0x4>; /* Level high type */ - interrupt-names = "intr"; + interrupts = <0 123 0x4>; /* aer interrupt */ + interrupt-names = "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; @@ -720,12 +757,14 @@ num-lanes = <4>; bus-range = <0x0 0xff>; msi-parent = <&its>; + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>, <0000 0 0 2 &gic 0 0 0 125 4>, <0000 0 0 3 &gic 0 0 0 126 4>, <0000 0 0 4 &gic 0 0 0 127 4>; + status = "disabled"; }; sata0: sata@3200000 { @@ -754,6 +793,8 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; }; usb1: usb3@3110000 { @@ -764,6 +805,14 @@ dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + }; + + serdes1: serdes@1ea0000 { + compatible = "fsl,serdes-10g"; + reg = <0x0 0x1ea0000 0 0x00002000>; + little-endian; }; ccn@4000000 { @@ -771,6 +820,14 @@ reg = <0x0 0x04000000 0x0 0x01000000>; interrupts = <0 12 4>; }; + + ftm0: ftm0@2800000 { + compatible = "fsl,ls208xa-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>, + <0x0 0x1e34050 0x0 0x4>; + reg-names = "ftm", "pmctrl"; + interrupts = <0 44 4>; + }; }; ddr1: memory-controller@1080000 { @@ -786,4 +843,44 @@ interrupts = <0 18 0x4>; little-endian; }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +#include "fsl-tmu-map1.dtsi" +#include "fsl-tmu-map2.dtsi" +#include "fsl-tmu-map3.dtsi" +&thermal_zones { + thermal-zone1 { + status = "okay"; + }; + + thermal-zone2{ + status = "okay"; + }; + + thermal-zone3{ + status = "okay"; + }; + + thermal-zone4{ + status = "okay"; + }; + + thermal-zone5{ + status = "okay"; + }; + + thermal-zone6{ + status = "okay"; + }; + + thermal-zone7 { + status = "okay"; + }; }; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160AQDS +// +// Copyright 2018 NXP + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "NXP Layerscape LX2160AQDS"; + compatible = "fsl,lx2160a-qds", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "MC34717-3.3VSB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + mdio-mux-1 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&emdio1>; + #address-cells=<1>; + #size-cells = <0>; + + mdio@0 { /* On-board PHY #1 RGMI1*/ + reg = <0x00>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@8 { /* On-board PHY #2 RGMI2*/ + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@18 { /* Slot #1 */ + reg = <0x18>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@19 { /* Slot #2 */ + reg = <0x19>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1a { /* Slot #3 */ + reg = <0x1a>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1b { /* Slot #4 */ + reg = <0x1b>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1c { /* Slot #5 */ + reg = <0x1c>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1d { /* Slot #6 */ + reg = <0x1d>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1e { /* Slot #7 */ + reg = <0x1e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1f { /* Slot #8 */ + reg = <0x1f>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio-mux-2 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 1>; + mdio-parent-bus = <&emdio2>; + #address-cells=<1>; + #size-cells = <0>; + + mdio@0 { /* Slot #1 (secondary EMI) */ + reg = <0x00>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { /* Slot #2 (secondary EMI) */ + reg = <0x01>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@2 { /* Slot #3 (secondary EMI) */ + reg = <0x02>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@3 { /* Slot #4 (secondary EMI) */ + reg = <0x03>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@4 { /* Slot #5 (secondary EMI) */ + reg = <0x04>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@5 { /* Slot #6 (secondary EMI) */ + reg = <0x05>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@6 { /* Slot #7 (secondary EMI) */ + reg = <0x06>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@7 { /* Slot #8 (secondary EMI) */ + reg = <0x07>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +&dspi0 { + status = "okay"; + + dflash0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi1 { + status = "okay"; + + dflash1: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi2 { + status = "okay"; + + dflash2: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&emdio1 { + status = "okay"; +}; + +&emdio2 { + status = "okay"; +}; + +&esdhc0 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + fpga@66 { + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux: mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bit 2:0 */ + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + + power-monitor@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + temperature-sensor@4d { + compatible = "nxp,sa56004"; + reg = <0x4d>; + vcc-supply = <&sb_3v3>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&pcs_mdio1 { + pcs_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + backplane-mode = "40gbase-kr"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0xF00 0xE00 0xD00 0xC00>; /* lanes H, G, F, E */ + }; +}; + +&pcs_mdio2 { + pcs_phy2: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + backplane-mode = "40gbase-kr"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0xB00 0xA00 0x900 0x800>; /* lanes D, C, B, A */ + }; +}; + +&pcs_mdio3 { + pcs_phy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + backplane-mode = "10gbase-kr"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0xF00 0x100>; /* lane H */ + }; +}; + +&pcs_mdio4 { + pcs_phy4: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + backplane-mode = "10gbase-kr"; + reg = <0x0>; + fsl,lane-handle = <&serdes1>; + fsl,lane-reg = <0xE00 0x100>; /* lane G */ + }; +}; + +/* Update DPMAC connections to 40G backplane PHYs + * &dpmac1 { + * phy-handle = <&pcs_phy1>; + * }; + * + * &dpmac2 { + * phy-handle = <&pcs_phy2>; + * }; + */ + +/* Update DPMAC connections to 10G backplane PHYs + * &dpmac3 { + * phy-handle = <&pcs_phy3>; + * }; + * + * &dpmac4 { + * phy-handle = <&pcs_phy4>; + * }; + */ --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160ARDB +// +// Copyright 2018 NXP + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "NXP Layerscape LX2160ARDB"; + compatible = "fsl,lx2160a-rdb", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "MC34717-3.3VSB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&crypto { + status = "okay"; +}; + +&emdio1 { + status = "okay"; +}; + +&emdio2 { + status = "okay"; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + temperature-sensor@4d { + compatible = "nxp,sa56004"; + reg = <0x4d>; + vcc-supply = <&sb_3v3>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + // IRQ10_B + interrupts = <0 150 0x4>; + }; +}; + +&fspi { + status = "okay"; + nxp,fspi-has-second-chip; + flash0: mt35xu512aba@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; + + flash1: mt35xu512aba@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <1>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&emdio1 { + rgmii_phy1: ethernet-phy@1 { + /* AR8035 PHY - "compatible" property not strictly needed */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x1>; + /* Poll mode - no "interrupts" property defined */ + }; + rgmii_phy2: ethernet-phy@2 { + /* AR8035 PHY - "compatible" property not strictly needed */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x2>; + /* Poll mode - no "interrupts" property defined */ + }; + aquantia_phy1: ethernet-phy@4 { + /* AQR107 PHY - "compatible" property not strictly needed */ + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + /* Poll mode - no "interrupts" property defined */ + }; + aquantia_phy2: ethernet-phy@5 { + /* AQR107 PHY - "compatible" property not strictly needed */ + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x5>; + /* Poll mode - no "interrupts" property defined */ + }; +}; + +&emdio2 { + inphi_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id0210.7440"; + reg = <0x0>; + }; +}; + +&dpmac3 { + phy-handle = <&aquantia_phy1>; + phy-connection-type = "xgmii"; +}; + +&dpmac4 { + phy-handle = <&aquantia_phy2>; + phy-connection-type = "xgmii"; +}; + +&dpmac5 { + phy-handle = <&inphi_phy>; +}; + +&dpmac6 { + phy-handle = <&inphi_phy>; +}; + +&dpmac17 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -0,0 +1,1318 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree Include file for Layerscape-LX2160A family SoC. +// +// Copyright 2018 NXP + +#include +#include + +/memreserve/ 0x80000000 0x00010000; + +/ { + compatible = "fsl,lx2160a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + // 8 clusters having 2 Cortex-A72 cores each + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x100>; + clocks = <&clockgen 1 1>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x101>; + clocks = <&clockgen 1 1>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x200>; + clocks = <&clockgen 1 2>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x201>; + clocks = <&clockgen 1 2>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x300>; + clocks = <&clockgen 1 3>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster3_l2>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x301>; + clocks = <&clockgen 1 3>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster3_l2>; + }; + + cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x400>; + clocks = <&clockgen 1 4>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster4_l2>; + }; + + cpu@401 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x401>; + clocks = <&clockgen 1 4>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster4_l2>; + }; + + cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x500>; + clocks = <&clockgen 1 5>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster5_l2>; + }; + + cpu@501 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x501>; + clocks = <&clockgen 1 5>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster5_l2>; + }; + + cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x600>; + clocks = <&clockgen 1 6>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster6_l2>; + }; + + cpu@601 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x601>; + clocks = <&clockgen 1 6>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster6_l2>; + }; + + cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x700>; + clocks = <&clockgen 1 7>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster7_l2>; + }; + + cpu@701 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + enable-method = "psci"; + reg = <0x701>; + clocks = <&clockgen 1 7>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <192>; + next-level-cache = <&cluster7_l2>; + }; + + cluster0_l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster1_l2: l2-cache1 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster2_l2: l2-cache2 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster3_l2: l2-cache3 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster4_l2: l2-cache4 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster5_l2: l2-cache5 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster6_l2: l2-cache6 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + + cluster7_l2: l2-cache7 { + compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; + cache-level = <2>; + }; + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, // GIC Dist + <0x0 0x06200000 0 0x200000>, // GICR (RD_base + + // SGI_base) + <0x0 0x0c0c0000 0 0x2000>, // GICC + <0x0 0x0c0d0000 0 0x1000>, // GICH + <0x0 0x0c0e0000 0 0x20000>; // GICV + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + interrupts = ; + + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x6020000 0 0x20000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + memory@80000000 { + // DRAM space - 1, size : 2 GB DRAM + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + }; + + ddr1: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = ; + little-endian; + }; + + ddr2: memory-controller@1090000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1090000 0x0 0x1000>; + interrupts = ; + little-endian; + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>; + + crypto: crypto@8000000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x8000000 0x100000>; + reg = <0x00 0x8000000 0x0 0x100000>; + interrupts = ; + dma-coherent; + status = "disabled"; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = ; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = ; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = ; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = ; + }; + }; + + clockgen: clock-controller@1300000 { + compatible = "fsl,lx2160a-clockgen"; + reg = <0 0x1300000 0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + dcfg: syscon@1e00000 { + compatible = "fsl,lx2160a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + little-endian; + }; + + /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */ + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b96000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + little-endian; /* force the driver in LE mode */ + status = "disabled"; + }; + + /* WRIOP0: 0x8b8_0000, E-MDIO2: 0x1_7000 */ + emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b97000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + little-endian; /* force the driver in LE mode */ + status = "disabled"; + }; + + pcs_mdio1: mdio@0x8c07000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c07000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio2: mdio@0x8c0b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0b000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio3: mdio@0x8c0f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0f000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio4: mdio@0x8c13000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c13000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio5: mdio@0x8c17000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c17000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio6: mdio@0x8c1b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1b000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio7: mdio@0x8c1f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1f000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + pcs_mdio8: mdio@0x8c23000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c23000 0x0 0x1000>; + device_type = "mdio"; + little-endian; + + #address-cells = <1>; + #size-cells = <0>; + }; + + serdes1: serdes@1ea0000 { + compatible = "fsl,serdes-28g"; + reg = <0x0 0x1ea0000 0 0x00002000>; + little-endian; + }; + + i2c0: i2c@2000000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@2010000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + i2c2: i2c@2020000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + i2c3: i2c@2030000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + i2c4: i2c@2040000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2040000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + i2c5: i2c@2050000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2050000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + i2c6: i2c@2060000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2060000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + i2c7: i2c@2070000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2070000 0x0 0x10000>; + interrupts = ; + clock-names = "i2c"; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + dspi0: spi@2100000 { + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 7>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <0>; + status = "disabled"; + }; + + dspi1: spi@2110000 { + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2110000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 7>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <1>; + status = "disabled"; + }; + + dspi2: spi@2120000 { + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2120000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 7>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <2>; + status = "disabled"; + }; + + esdhc0: esdhc@2140000 { + compatible = "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <0 28 0x4>; /* Level high type */ + clocks = <&clockgen 4 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + + esdhc1: esdhc@2150000 { + compatible = "fsl,esdhc"; + reg = <0x0 0x2150000 0x0 0x10000>; + interrupts = <0 63 0x4>; /* Level high type */ + clocks = <&clockgen 4 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + broken-cd; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + + uart0: serial@21c0000 { + compatible = "arm,sbsa-uart","arm,pl011"; + reg = <0x0 0x21c0000 0x0 0x1000>; + interrupts = ; + current-speed = <115200>; + status = "disabled"; + }; + + uart1: serial@21d0000 { + compatible = "arm,sbsa-uart","arm,pl011"; + reg = <0x0 0x21d0000 0x0 0x1000>; + interrupts = ; + current-speed = <115200>; + status = "disabled"; + }; + + uart2: serial@21e0000 { + compatible = "arm,sbsa-uart","arm,pl011"; + reg = <0x0 0x21e0000 0x0 0x1000>; + interrupts = ; + current-speed = <115200>; + status = "disabled"; + }; + + uart3: serial@21f0000 { + compatible = "arm,sbsa-uart","arm,pl011"; + reg = <0x0 0x21f0000 0x0 0x1000>; + interrupts = ; + current-speed = <115200>; + status = "disabled"; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = ; + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = ; + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = ; + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = ; + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + watchdog@23a0000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x0 0x23a0000 0 0x1000>, + <0x0 0x2390000 0 0x1000>; + interrupts = ; + timeout-sec = <30>; + }; + + ftm0: ftm0@2800000 { + compatible = "fsl,ftm-alarm", "fsl,lx2160a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>, + <0x0 0x1e34050 0x0 0x4>; + reg-names = "ftm", "FlexTimer1"; + interrupts = <0 44 0x4>; + status = "okay"; + }; + + usb0: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + status = "disabled"; + }; + + usb1: usb@3110000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = ; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; + status = "disabled"; + }; + + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #iommu-cells = <1>; + #global-interrupts = <14>; + // global secure fault + interrupts = , + // combined secure + , + // global non-secure fault + , + // combined non-secure + , + // performance counter interrupts 0-9 + , + , + , + , + , + , + , + , + , + , + // per context interrupt, 64 interrupts + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + dma-coherent; + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, + <0x00000000 0x08340000 0 0x40000>; + msi-parent = <&its>; + /* iommu-map property is fixed up by u-boot */ + iommu-map = <0 &smmu 0 0>; + dma-coherent; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + /* + * Define the maximum number of MACs present on the SoC. + */ + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x1>; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x2>; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x3>; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x5>; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x6>; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x7>; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x8>; + }; + + dpmac9: dpmac@9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x9>; + }; + + dpmac10: dpmac@a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + }; + + dpmac11: dpmac@b { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xb>; + }; + + dpmac12: dpmac@c { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xc>; + }; + + dpmac13: dpmac@d { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xd>; + }; + + dpmac14: dpmac@e { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xe>; + }; + + dpmac15: dpmac@f { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xf>; + }; + + dpmac16: dpmac@10 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x10>; + }; + + dpmac17: dpmac@11 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x11>; + }; + + dpmac18: dpmac@12 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x12>; + }; + }; + }; + + fspi: flexspi@20c0000 { + status = "disabled"; + compatible = "nxp,lx2160a-fspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "FSPI", "FSPI-memory"; + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + }; + + sata0: sata@3200000 { + status = "disabled"; + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + sata1: sata@3210000 { + status = "disabled"; + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + sata2: sata@3220000 { + status = "disabled"; + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3220000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + sata3: sata@3230000 { + status = "disabled"; + compatible = "fsl,lx2160a-ahci"; + reg = <0x0 0x3230000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + pcie@3400000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x80 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = , /* AER interrupt */ + , /* PME interrupt */ + ; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <8>; + ppio-wins = <8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie_ep@3400000 { + compatible = "fsl,lx2160a-pcie-ep"; + reg = <0x00 0x03400000 0x0 0x00100000 + 0x80 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ob-windows = <256>; + status = "disabled"; + }; + + pcie@3500000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x88 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = , /* AER interrupt */ + , /* PME interrupt */ + ; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <8>; + ppio-wins = <8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie_ep@3500000 { + compatible = "fsl,lx2160a-pcie-ep"; + reg = <0x00 0x03500000 0x0 0x00100000 + 0x88 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ob-windows = <256>; + status = "disabled"; + }; + + pcie@3600000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x90 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = , /* AER interrupt */ + , /* PME interrupt */ + ; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <8>; + ppio-wins = <8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie_ep@3600000 { + compatible = "fsl,lx2160a-pcie-ep"; + reg = <0x00 0x03600000 0x0 0x00100000 + 0x90 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ob-windows = <256>; + max-functions = <2>; + status = "disabled"; + }; + + pcie@3700000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ + 0x98 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = , /* AER interrupt */ + , /* PME interrupt */ + ; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <8>; + ppio-wins = <8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie_ep@3700000 { + compatible = "fsl,lx2160a-pcie-ep"; + reg = <0x00 0x03700000 0x0 0x00100000 + 0x98 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ob-windows = <256>; + status = "disabled"; + }; + + pcie@3800000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */ + 0xa0 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = , /* AER interrupt */ + , /* PME interrupt */ + ; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <8>; + ppio-wins = <8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie_ep@3800000 { + compatible = "fsl,lx2160a-pcie-ep"; + reg = <0x00 0x03800000 0x0 0x00100000 + 0xa0 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ob-windows = <256>; + max-functions = <2>; + status = "disabled"; + }; + + pcie@3900000 { + compatible = "fsl,lx2160a-pcie"; + reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */ + 0xa8 0x00000000 0x0 0x00001000>; /* configuration space */ + reg-names = "csr_axi_slave", "config_axi_slave"; + interrupts = , /* AER interrupt */ + , /* PME interrupt */ + ; /* controller interrupt */ + interrupt-names = "aer", "pme", "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + apio-wins = <8>; + ppio-wins = <8>; + bus-range = <0x0 0xff>; + ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie_ep@3900000 { + compatible = "fsl,lx2160a-pcie-ep"; + reg = <0x00 0x03900000 0x0 0x00100000 + 0xa8 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ob-windows = <256>; + status = "disabled"; + }; + + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map1.dtsi @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Thermal Monitor Unit. + * + * Copyright 2018 NXP + * + * Tang Yuantian + * + */ + +&thermal_zones { + thermal-zone0 { + cooling-maps { + map1 { + trip = <&alert0>; + cooling-device = + <&cooling_map1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone1 { + cooling-maps { + map1 { + trip = <&alert1>; + cooling-device = + <&cooling_map1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone2 { + cooling-maps { + map1 { + trip = <&alert2>; + cooling-device = + <&cooling_map1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone3 { + cooling-maps { + map1 { + trip = <&alert3>; + cooling-device = + <&cooling_map1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone4 { + cooling-maps { + map1 { + trip = <&alert4>; + cooling-device = + <&cooling_map1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone5 { + cooling-maps { + map1 { + trip = <&alert5>; + cooling-device = + <&cooling_map1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone6 { + cooling-maps { + map1 { + trip = <&alert6>; + cooling-device = + <&cooling_map1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone7 { + cooling-maps { + map1 { + trip = <&alert7>; + cooling-device = + <&cooling_map1 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map2.dtsi @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Thermal Monitor Unit. + * + * Copyright 2018 NXP + * + * Tang Yuantian + * + */ + +&thermal_zones { + thermal-zone0 { + cooling-maps { + map2 { + trip = <&alert0>; + cooling-device = + <&cooling_map2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone1 { + cooling-maps { + map2 { + trip = <&alert1>; + cooling-device = + <&cooling_map2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone2 { + cooling-maps { + map2 { + trip = <&alert2>; + cooling-device = + <&cooling_map2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone3 { + cooling-maps { + map2 { + trip = <&alert3>; + cooling-device = + <&cooling_map2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone4 { + cooling-maps { + map2 { + trip = <&alert4>; + cooling-device = + <&cooling_map2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone5 { + cooling-maps { + map2 { + trip = <&alert5>; + cooling-device = + <&cooling_map2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone6 { + cooling-maps { + map2 { + trip = <&alert6>; + cooling-device = + <&cooling_map2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone7 { + cooling-maps { + map2 { + trip = <&alert7>; + cooling-device = + <&cooling_map2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-tmu-map3.dtsi @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Thermal Monitor Unit. + * + * Copyright 2018 NXP + * + * Tang Yuantian + * + */ + +&thermal_zones { + thermal-zone0 { + cooling-maps { + map3 { + trip = <&alert0>; + cooling-device = + <&cooling_map3 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone1 { + cooling-maps { + map3 { + trip = <&alert1>; + cooling-device = + <&cooling_map3 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone2 { + cooling-maps { + map3 { + trip = <&alert2>; + cooling-device = + <&cooling_map3 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone3 { + cooling-maps { + map3 { + trip = <&alert3>; + cooling-device = + <&cooling_map3 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone4 { + cooling-maps { + map3 { + trip = <&alert4>; + cooling-device = + <&cooling_map3 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone5 { + cooling-maps { + map3 { + trip = <&alert5>; + cooling-device = + <&cooling_map3 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone6 { + cooling-maps { + map3 { + trip = <&alert6>; + cooling-device = + <&cooling_map3 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone7 { + cooling-maps { + map3 { + trip = <&alert7>; + cooling-device = + <&cooling_map3 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-tmu.dtsi @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Thermal Monitor Unit. + * + * Copyright 2018 NXP + * + * Tang Yuantian + * + */ + +thermal_zones: thermal-zones { + thermal_zone0: thermal-zone0 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + status = "disabled"; + + trips { + alert0: alert0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + crit0: crit0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert0>; + cooling-device = + <&cooling_map0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone1 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + status = "disabled"; + + trips { + alert1: alert1 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + crit1: crit1 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert1>; + cooling-device = + <&cooling_map0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone2 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 2>; + status = "disabled"; + + trips { + alert2: alert2 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + crit2: crit2 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert2>; + cooling-device = + <&cooling_map0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone3 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 3>; + status = "disabled"; + + trips { + alert3: alert3 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + crit3: crit3 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert3>; + cooling-device = + <&cooling_map0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone4 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 4>; + status = "disabled"; + + trips { + alert4: alert4 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + crit4: crit4 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert4>; + cooling-device = + <&cooling_map0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone5 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 5>; + status = "disabled"; + + trips { + alert5: alert5 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + crit5: crit5 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert5>; + cooling-device = + <&cooling_map0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone6 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 6>; + status = "disabled"; + + trips { + alert6: alert6 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + crit6: crit6 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert6>; + cooling-device = + <&cooling_map0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + + thermal-zone7 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 7>; + status = "disabled"; + + trips { + alert7: alert7 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + crit7: crit7 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert7>; + cooling-device = + <&cooling_map0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; +}; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals-sdk.dtsi @@ -0,0 +1,55 @@ +/* + * QorIQ BMan SDK Portals device tree nodes + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * Copyright 2017 NXP + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&bportals { + bman-portal@0 { + cell-index = <0>; + }; + + bman-portal@10000 { + cell-index = <1>; + }; + + bman-portal@20000 { + cell-index = <2>; + }; + + bman-portal@30000 { + cell-index = <3>; + }; + + bman-portal@40000 { + cell-index = <4>; + }; + + bman-portal@50000 { + cell-index = <5>; + }; + + bman-portal@60000 { + cell-index = <6>; + }; + + bman-portal@70000 { + cell-index = <7>; + }; + + bman-portal@80000 { + cell-index = <8>; + }; + + bman-portal@90000 { + cell-index = <9>; + }; + + bman-bpids@0 { + compatible = "fsl,bpid-range"; + fsl,bpid-range = <32 32>; + }; +}; --- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ BMan Portals device tree * * Copyright 2011-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &bportals { @@ -68,4 +68,10 @@ reg = <0x80000 0x4000>, <0x4080000 0x4000>; interrupts = ; }; + + bman-portal@90000 { + compatible = "fsl,bman-portal"; + reg = <0x90000 0x4000>, <0x4090000 0x4000>; + interrupts = ; + }; }; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-dpaa-eth.dtsi @@ -0,0 +1,97 @@ +/* + * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fsldpaa: fsl,dpaa { + compatible = "fsl,ls1043a-dpaa", "simple-bus", "fsl,dpaa"; + ethernet@0 { + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet0>; + dma-coherent; + }; + ethernet@1 { + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet1>; + dma-coherent; + }; + ethernet@2 { + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet2>; + dma-coherent; + }; + ethernet@3 { + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet3>; + dma-coherent; + }; + ethernet@4 { + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet4>; + dma-coherent; + }; + ethernet@5 { + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet5>; + dma-coherent; + }; + ethernet@8 { + compatible = "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet6>; + dma-coherent; + }; + ethernet@6 { + compatible = "fsl,im-ethernet"; + fsl,fman-mac = <&enet2>; + dma-coherent; + fpmevt-sel = <0>; + }; + ethernet@7 { + compatible = "fsl,im-ethernet"; + fsl,fman-mac = <&enet3>; + dma-coherent; + fpmevt-sel = <1>; + }; + ethernet@10 { + compatible = "fsl,im-ethernet"; + fsl,fman-mac = <&enet4>; + dma-coherent; + fpmevt-sel = <2>; + }; + ethernet@11 { + compatible = "fsl,im-ethernet"; + fsl,fman-mac = <&enet5>; + dma-coherent; + fpmevt-sel = <3>; + }; +}; + --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi @@ -1,27 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 10g port #0 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { fman0_rx_0x10: port@90000 { cell-index = <0x10>; - compatible = "fsl,fman-v3-port-rx"; + compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx"; reg = <0x90000 0x1000>; fsl,fman-10g-port; }; fman0_tx_0x30: port@b0000 { cell-index = <0x30>; - compatible = "fsl,fman-v3-port-tx"; + compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx"; reg = <0xb0000 0x1000>; fsl,fman-10g-port; + fsl,qman-channel-id = <0x800>; }; - ethernet@f0000 { + mac9: ethernet@f0000 { cell-index = <0x8>; compatible = "fsl,fman-memac"; reg = <0xf0000 0x1000>; @@ -29,7 +30,7 @@ fman@1a00000 { pcsphy-handle = <&pcsphy6>; }; - mdio@f1000 { + mdio9: mdio@f1000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi @@ -1,27 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 10g port #1 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { fman0_rx_0x11: port@91000 { cell-index = <0x11>; - compatible = "fsl,fman-v3-port-rx"; + compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-10g-rx"; reg = <0x91000 0x1000>; fsl,fman-10g-port; }; fman0_tx_0x31: port@b1000 { cell-index = <0x31>; - compatible = "fsl,fman-v3-port-tx"; + compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-10g-tx"; reg = <0xb1000 0x1000>; fsl,fman-10g-port; + fsl,qman-channel-id = <0x801>; }; - ethernet@f2000 { + mac10: ethernet@f2000 { cell-index = <0x9>; compatible = "fsl,fman-memac"; reg = <0xf2000 0x1000>; @@ -29,7 +30,7 @@ fman@1a00000 { pcsphy-handle = <&pcsphy7>; }; - mdio@f3000 { + mdio10: mdio@f3000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi @@ -1,22 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #0 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { fman0_rx_0x08: port@88000 { cell-index = <0x8>; - compatible = "fsl,fman-v3-port-rx"; + compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x88000 0x1000>; }; fman0_tx_0x28: port@a8000 { cell-index = <0x28>; - compatible = "fsl,fman-v3-port-tx"; + compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xa8000 0x1000>; + fsl,qman-channel-id = <0x802>; }; ethernet@e0000 { --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi @@ -1,22 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #1 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { fman0_rx_0x09: port@89000 { cell-index = <0x9>; - compatible = "fsl,fman-v3-port-rx"; + compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x89000 0x1000>; }; fman0_tx_0x29: port@a9000 { cell-index = <0x29>; - compatible = "fsl,fman-v3-port-tx"; + compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xa9000 0x1000>; + fsl,qman-channel-id = <0x803>; }; ethernet@e2000 { --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi @@ -1,22 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #2 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { fman0_rx_0x0a: port@8a000 { cell-index = <0xa>; - compatible = "fsl,fman-v3-port-rx"; + compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x8a000 0x1000>; }; fman0_tx_0x2a: port@aa000 { cell-index = <0x2a>; - compatible = "fsl,fman-v3-port-tx"; + compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xaa000 0x1000>; + fsl,qman-channel-id = <0x804>; }; ethernet@e4000 { --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi @@ -1,22 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #3 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { fman0_rx_0x0b: port@8b000 { cell-index = <0xb>; - compatible = "fsl,fman-v3-port-rx"; + compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x8b000 0x1000>; }; fman0_tx_0x2b: port@ab000 { cell-index = <0x2b>; - compatible = "fsl,fman-v3-port-tx"; + compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xab000 0x1000>; + fsl,qman-channel-id = <0x805>; }; ethernet@e6000 { --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi @@ -1,22 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #4 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { fman0_rx_0x0c: port@8c000 { cell-index = <0xc>; - compatible = "fsl,fman-v3-port-rx"; + compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x8c000 0x1000>; }; fman0_tx_0x2c: port@ac000 { cell-index = <0x2c>; - compatible = "fsl,fman-v3-port-tx"; + compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xac000 0x1000>; + fsl,qman-channel-id = <0x806>; }; ethernet@e8000 { --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi @@ -1,22 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 1g port #5 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman@1a00000 { fman0_rx_0x0d: port@8d000 { cell-index = <0xd>; - compatible = "fsl,fman-v3-port-rx"; + compatible = "fsl,fman-v3-port-rx", "fsl,fman-port-1g-rx"; reg = <0x8d000 0x1000>; }; fman0_tx_0x2d: port@ad000 { cell-index = <0x2d>; - compatible = "fsl,fman-v3-port-tx"; + compatible = "fsl,fman-v3-port-tx", "fsl,fman-port-1g-tx"; reg = <0xad000 0x1000>; + fsl,qman-channel-id = <0x807>; }; ethernet@ea000 { --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-6oh.dtsi @@ -0,0 +1,47 @@ +/* + * QorIQ FMan v3 OH ports device tree + * + * Copyright 2012-2015 Freescale Semiconductor Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +fman@1a00000 { + + fman0_oh1: port@82000 { + cell-index = <0>; + compatible = "fsl,fman-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh2: port@83000 { + cell-index = <1>; + compatible = "fsl,fman-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh3: port@84000 { + cell-index = <2>; + compatible = "fsl,fman-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh4: port@85000 { + cell-index = <3>; + compatible = "fsl,fman-port-oh"; + reg = <0x85000 0x1000>; + }; + + fman0_oh5: port@86000 { + cell-index = <4>; + compatible = "fsl,fman-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman0_oh6: port@87000 { + cell-index = <5>; + compatible = "fsl,fman-port-oh"; + reg = <0x87000 0x1000>; + }; + +}; --- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ FMan v3 device tree * * Copyright 2012-2015 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ fman0: fman@1a00000 { @@ -11,53 +11,104 @@ fman0: fman@1a00000 { #size-cells = <1>; cell-index = <0>; compatible = "fsl,fman"; - ranges = <0x0 0x0 0x1a00000 0x100000>; - reg = <0x0 0x1a00000 0x0 0x100000>; + ranges = <0x0 0x0 0x1a00000 0xfe000>; + reg = <0x0 0x1a00000 0x0 0xfe000>; interrupts = , ; clocks = <&clockgen 3 0>; clock-names = "fmanclk"; fsl,qman-channel-range = <0x800 0x10>; + ptimer-handle = <&ptp_timer0>; + + cc { + compatible = "fsl,fman-cc"; + }; muram@0 { compatible = "fsl,fman-muram"; reg = <0x0 0x60000>; }; + bmi@80000 { + compatible = "fsl,fman-bmi"; + reg = <0x80000 0x400>; + }; + + qmi@80400 { + compatible = "fsl,fman-qmi"; + reg = <0x80400 0x400>; + }; + fman0_oh_0x2: port@82000 { cell-index = <0x2>; compatible = "fsl,fman-v3-port-oh"; reg = <0x82000 0x1000>; + fsl,qman-channel-id = <0x809>; }; fman0_oh_0x3: port@83000 { cell-index = <0x3>; compatible = "fsl,fman-v3-port-oh"; reg = <0x83000 0x1000>; + fsl,qman-channel-id = <0x80a>; }; fman0_oh_0x4: port@84000 { cell-index = <0x4>; compatible = "fsl,fman-v3-port-oh"; reg = <0x84000 0x1000>; + fsl,qman-channel-id = <0x80b>; }; fman0_oh_0x5: port@85000 { cell-index = <0x5>; compatible = "fsl,fman-v3-port-oh"; reg = <0x85000 0x1000>; + fsl,qman-channel-id = <0x80c>; }; fman0_oh_0x6: port@86000 { cell-index = <0x6>; compatible = "fsl,fman-v3-port-oh"; reg = <0x86000 0x1000>; + fsl,qman-channel-id = <0x80d>; }; fman0_oh_0x7: port@87000 { cell-index = <0x7>; compatible = "fsl,fman-v3-port-oh"; reg = <0x87000 0x1000>; + fsl,qman-channel-id = <0x80e>; + }; + + policer@c0000 { + compatible = "fsl,fman-policer"; + reg = <0xc0000 0x1000>; + }; + + keygen@c1000 { + compatible = "fsl,fman-keygen"; + reg = <0xc1000 0x1000>; + }; + + dma@c2000 { + compatible = "fsl,fman-dma"; + reg = <0xc2000 0x1000>; + }; + + fpm@c3000 { + compatible = "fsl,fman-fpm"; + reg = <0xc3000 0x1000>; + }; + + parser@c7000 { + compatible = "fsl,fman-parser"; + reg = <0xc7000 0x1000>; + }; + + vsps@dc000 { + compatible = "fsl,fman-vsps"; + reg = <0xdc000 0x1000>; }; mdio0: mdio@fc000 { @@ -73,9 +124,11 @@ fman0: fman@1a00000 { compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xfd000 0x1000>; }; +}; - ptp_timer0: ptp-timer@fe000 { - compatible = "fsl,fman-ptp-timer"; - reg = <0xfe000 0x1000>; - }; +ptp_timer0: ptp-timer@1afe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0x0 0x1afe000 0x0 0x1000>; + interrupts = ; + clocks = <&clockgen 3 0>; }; --- /dev/null +++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals-sdk.dtsi @@ -0,0 +1,38 @@ +/* + * QorIQ QMan SDK Portals device tree nodes + * + * Copyright 2011-2016 Freescale Semiconductor Inc. + * Copyright 2017 NXP + * + * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) + */ + +&qportals { + qman-fqids@0 { + compatible = "fsl,fqid-range"; + fsl,fqid-range = <256 256>; + }; + + qman-fqids@1 { + compatible = "fsl,fqid-range"; + fsl,fqid-range = <32768 32768>; + }; + + qman-pools@0 { + compatible = "fsl,pool-channel-range"; + fsl,pool-channel-range = <0x401 0xf>; + }; + + qman-cgrids@0 { + compatible = "fsl,cgrid-range"; + fsl,cgrid-range = <0 256>; + }; + + qman-ceetm@0 { + compatible = "fsl,qman-ceetm"; + fsl,ceetm-lfqid-range = <0xf00000 0x1000>; + fsl,ceetm-sp-range = <0 16>; + fsl,ceetm-lni-range = <0 8>; + fsl,ceetm-channel-range = <0 32>; + }; +}; --- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi @@ -1,9 +1,9 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * QorIQ QMan Portals device tree * * Copyright 2011-2016 Freescale Semiconductor Inc. * - * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ &qportals { @@ -77,4 +77,11 @@ interrupts = ; cell-index = <8>; }; + + qportal9: qman-portal@90000 { + compatible = "fsl,qman-portal"; + reg = <0x90000 0x4000>, <0x4090000 0x4000>; + interrupts = ; + cell-index = <9>; + }; }; --- a/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts +++ b/arch/arm64/boot/dts/freescale/traverse-ls1043s.dts @@ -330,3 +330,32 @@ &sata { status = "disabled"; }; + +/* Additions for Layerscape SDK (4.4/4.9) Kernel only + * These kernels need additional setup for FMan/QMan DMA shared memory + */ + +#include "qoriq-qman-portals-sdk.dtsi" +#include "qoriq-bman-portals-sdk.dtsi" + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&soc { +#include "qoriq-dpaa-eth.dtsi" +#include "qoriq-fman3-0-6oh.dtsi" +}; + +&fman0 { + compatible = "fsl,fman", "simple-bus"; +}; --- a/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts +++ b/arch/arm64/boot/dts/freescale/traverse-ls1043v.dts @@ -251,3 +251,32 @@ &sata { status = "disabled"; }; + +/* Additions for Layerscape SDK (4.4/4.9) Kernel only + * These kernels need additional setup for FMan/QMan DMA shared memory + */ + +#include "qoriq-qman-portals-sdk.dtsi" +#include "qoriq-bman-portals-sdk.dtsi" + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&soc { +#include "qoriq-dpaa-eth.dtsi" +#include "qoriq-fman3-0-6oh.dtsi" +}; + +&fman0 { + compatible = "fsl,fman", "simple-bus"; +};