From: Felix Fietkau Date: Thu, 19 Jan 2017 14:14:36 +0100 Subject: [PATCH] MIPS: Lantiq: Keep ethernet enabled during boot Disabling ethernet during reboot (only to enable it again when the ethernet driver attaches) can put the chip into a faulty state where it corrupts the header of all incoming packets. This happens if packets arrive during the time window where the core is disabled, and it can be easily reproduced by rebooting while sending a flood ping to the broadcast address. Cc: john@phrozen.org Cc: hauke.mehrtens@lantiq.com Cc: stable@vger.kernel.org Fixes: 95135bfa7ead ("MIPS: Lantiq: Deactivate most of the devices by default") Signed-off-by: Felix Fietkau --- --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c @@ -564,7 +564,7 @@ void __init ltq_soc_init(void) clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI); clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL); - clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | PMU_PPE_DP); + clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); } else if (of_machine_is_compatible("lantiq,ar10")) { @@ -572,7 +572,7 @@ void __init ltq_soc_init(void) ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz()); clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0); clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1); - clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | + clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP | PMU_PPE_TC); clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY); @@ -594,11 +594,11 @@ void __init ltq_soc_init(void) clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS); clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); - clkdev_add_pmu("1e108000.eth", NULL, 1, 0, + clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | PMU_PPE_QSB | PMU_PPE_TOP); - clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY); + clkdev_add_pmu("1f203000.rcu", "gphy", 0, 0, PMU_GPHY); clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);