/dts-v1/; #include "danube.dtsi" #include / { compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube"; model = "Speedport W303V Typ A"; chosen { bootargs = "console=ttyLTQ0,115200"; }; aliases { led-boot = &power_green; led-failsafe = &power_red; led-running = &power_green; led-dsl = &power_green; led-internet = &online; led-wifi = &wifi; }; memory@0 { reg = <0x0 0x2000000>; }; sram@1F000000 { vmmc@107000 { status = "okay"; gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; }; }; fpi@10000000 { localbus@0 { nor-boot@0 { compatible = "lantiq,nor"; bank-width = <2>; reg = <0 0x0 0x2000000>; #address-cells = <1>; #size-cells = <1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "uboot"; reg = <0x00000 0x10000>; read-only; }; partition@10000 { label = "uboot_env"; reg = <0x10000 0x10000>; read-only; }; partition@20000 { label = "firmware"; reg = <0x20000 0x3d0000>; }; boardconfig: partition@400000 { label = "board_config"; reg = <0x3f0000 0x10000>; read-only; }; }; }; }; gpio: pinmux@E100B10 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { exin { lantiq,groups = "exin1"; lantiq,function = "exin"; }; pci { lantiq,groups = "gnt1", "req1"; lantiq,function = "pci"; }; }; }; etop@E180000 { phy-mode = "mii"; mtd-mac-address = <&boardconfig 0x16>; }; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <100>; wps { label = "wps"; gpios = <&gpio 29 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio 30 GPIO_ACTIVE_LOW>; linux,code = ; }; }; gpio-leds { compatible = "gpio-leds"; power_green: power { label = "arv7525pw:green:power"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; default-state = "keep"; }; power_red: power1 { label = "arv7525pw:red:power"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; online: online { label = "arv7525pw:green:online"; gpios = <&gpio 5 GPIO_ACTIVE_LOW>; }; voice { label = "arv7525pw:green:telefonie"; gpios = <&gpio 6 GPIO_ACTIVE_LOW>; }; voice2 { label = "arv7525pw:red:telefonie"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; }; wifi: wifi { label = "arv7525pw:green:wlan"; gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; }; }; &pci0 { status = "okay"; interrupt-map = <0x7000 0 0 1 &icu0 135 1>; wifi@0,0 { compatible = "pci0,0"; reg = <0x7000 0 0 0 0>; ralink,mtd-eeprom = <&boardconfig 0x410>; }; };