From 625c90a8266e432ea15e109123ca941062b63f76 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Wed, 16 Nov 2022 22:48:40 +0100 Subject: [PATCH] arm64: dts: qcom: ipq8074: fix Gen3 PCIe node IPQ8074 comes in 2 silicon versions: * v1 with 2x Gen2 PCIe ports and QMP PHY-s * v2 with 1x Gen3 and 1x Gen2 PCIe ports and QMP PHY-s v2 is the final and production version that is actually supported by the kernel, however it looks like PCIe related nodes were added for the v1 SoC. Finish the PCIe fixup by using the correct compatible, adding missing ATU register space, declaring max-link-speed, use correct ranges, add missing clocks and resets. Fixes: 33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes") Signed-off-by: Robert Marko --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 30 +++++++++++++++------------ 1 file changed, 17 insertions(+), 13 deletions(-) --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -854,16 +854,18 @@ }; pcie0: pci@20000000 { - compatible = "qcom,pcie-ipq8074"; + compatible = "qcom,pcie-ipq8074-gen3"; reg = <0x20000000 0xf1d>, <0x20000f20 0xa8>, - <0x00080000 0x2000>, + <0x20001000 0x1000>, + <0x00080000 0x4000>, <0x20100000 0x1000>; - reg-names = "dbi", "elbi", "parf", "config"; + reg-names = "dbi", "elbi", "atu", "parf", "config"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; num-lanes = <1>; + max-link-speed = <3>; #address-cells = <3>; #size-cells = <2>; @@ -871,9 +873,9 @@ phy-names = "pciephy"; ranges = <0x81000000 0 0x20200000 0x20200000 - 0 0x100000 /* downstream I/O */ - 0x82000000 0 0x20300000 0x20300000 - 0 0xd00000>; /* non-prefetchable memory */ + 0 0x10000>, /* downstream I/O */ + <0x82000000 0 0x20220000 0x20220000 + 0 0xfde0000>; /* non-prefetchable memory */ interrupts = ; interrupt-names = "msi"; @@ -891,28 +893,30 @@ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, <&gcc GCC_PCIE0_AXI_M_CLK>, <&gcc GCC_PCIE0_AXI_S_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>, - <&gcc GCC_PCIE0_AUX_CLK>; - + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE0_RCHNG_CLK>; clock-names = "iface", "axi_m", "axi_s", - "ahb", - "aux"; + "axi_bridge", + "rchng"; + resets = <&gcc GCC_PCIE0_PIPE_ARES>, <&gcc GCC_PCIE0_SLEEP_ARES>, <&gcc GCC_PCIE0_CORE_STICKY_ARES>, <&gcc GCC_PCIE0_AXI_MASTER_ARES>, <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, <&gcc GCC_PCIE0_AHB_ARES>, - <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; reset-names = "pipe", "sleep", "sticky", "axi_m", "axi_s", "ahb", - "axi_m_sticky"; + "axi_m_sticky", + "axi_s_sticky"; status = "disabled"; }; };