From dedc087d43013ab6043dd1da4cd585dd4242a6bb Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Mon, 4 Jul 2022 23:23:54 +0200 Subject: [PATCH] regulator: qcom_spmi: add support for HT_P150 HT_P150 is a LDO PMOS regulator based on LV P150 using HFS430 layout found in PMP8074 and PMS405 PMIC-s. Both PMP8074 and PMS405 define the programmable range as 1.616V to 3.304V but the actual MAX output voltage depends on the exact LDO in each of the PMIC-s. It has a max current of 150mA, voltage step of 8mV. Signed-off-by: Robert Marko Link: https://lore.kernel.org/r/20220704212402.1715182-4-robimarko@gmail.com Signed-off-by: Mark Brown --- drivers/regulator/qcom_spmi-regulator.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -164,6 +164,7 @@ enum spmi_regulator_subtype { SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3 = 0x0f, SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4 = 0x10, SPMI_REGULATOR_SUBTYPE_HFS430 = 0x0a, + SPMI_REGULATOR_SUBTYPE_HT_P150 = 0x35, }; enum spmi_common_regulator_registers { @@ -544,6 +545,10 @@ static struct spmi_voltage_range hfs430_ SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000), }; +static struct spmi_voltage_range ht_p150_ranges[] = { + SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000), +}; + static DEFINE_SPMI_SET_POINTS(pldo); static DEFINE_SPMI_SET_POINTS(nldo1); static DEFINE_SPMI_SET_POINTS(nldo2); @@ -564,6 +569,7 @@ static DEFINE_SPMI_SET_POINTS(nldo660); static DEFINE_SPMI_SET_POINTS(ht_lvpldo); static DEFINE_SPMI_SET_POINTS(ht_nldo); static DEFINE_SPMI_SET_POINTS(hfs430); +static DEFINE_SPMI_SET_POINTS(ht_p150); static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf, int len) @@ -1458,6 +1464,7 @@ static const struct regulator_ops spmi_h static const struct spmi_regulator_mapping supported_regulators[] = { /* type subtype dig_min dig_max ltype ops setpoints hpm_min */ + SPMI_VREG(LDO, HT_P150, 0, INF, HFS430, hfs430, ht_p150, 10000), SPMI_VREG(BUCK, GP_CTL, 0, INF, SMPS, smps, smps, 100000), SPMI_VREG(BUCK, HFS430, 0, INF, HFS430, hfs430, hfs430, 10000), SPMI_VREG(LDO, N300, 0, INF, LDO, ldo, nldo1, 10000),