// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2022, Robert Marko <robimarko@gmail.com> */

/dts-v1/;

#include "ipq8074.dtsi"
#include "ipq8074-hk-cpu.dtsi"
#include "ipq8074-ess.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	model = "Dynalink DL-WRX36";
	compatible = "dynalink,dl-wrx36", "qcom,ipq8074";

	aliases {
		led-boot = &led_system_red;
		led-failsafe = &led_system_red;
		led-running = &led_system_blue;
		led-upgrade = &led_system_red;
		serial0 = &blsp1_uart5;
		/* Aliases as required by u-boot to patch MAC addresses */
		ethernet0 = &dp6_syn;
		ethernet1 = &dp4;
		ethernet2 = &dp3;
		ethernet3 = &dp2;
		ethernet4 = &dp1;
		label-mac-device = &dp6_syn;
	};

	chosen {
		stdout-path = "serial0:115200n8";
		bootargs-append = " root=/dev/ubiblock0_1";
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_system_blue: system-blue {
			label = "blue:system";
			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_BLUE>;
		};

		led_system_red: system-red {
			label = "red:system";
			gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_RED>;
		};
	};
};

&tlmm {
	mdio_pins: mdio-pins {
		mdc {
			pins = "gpio68";
			function = "mdc";
			drive-strength = <8>;
			bias-pull-up;
		};

		mdio {
			pins = "gpio69";
			function = "mdio";
			drive-strength = <8>;
			bias-pull-up;
		};
	};
};

&blsp1_uart5 {
	status = "okay";
};

&prng {
	status = "okay";
};

&cryptobam {
	status = "okay";
};

&crypto {
	status = "okay";
};

&qpic_bam {
	status = "okay";
};

&qpic_nand {
	status = "okay";

	nand@0 {
		reg = <0>;
		nand-ecc-strength = <8>;
		nand-ecc-step-size = <512>;
		nand-bus-width = <8>;

		partitions {
			compatible = "qcom,smem-part";
		};
	};
};

&qusb_phy_0 {
	status = "okay";
};

&ssphy_0 {
	status = "okay";
};

&usb_0 {
	status = "okay";
};

&mdio {
	status = "okay";

	pinctrl-0 = <&mdio_pins>;
	pinctrl-names = "default";
	reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;

	qca8075_0: ethernet-phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0>;
	};

	qca8075_1: ethernet-phy@1 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <1>;
	};

	qca8075_2: ethernet-phy@2 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <2>;
	};

	qca8075_3: ethernet-phy@3 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <3>;
	};

	qca8081: ethernet-phy@28 {
		compatible = "ethernet-phy-id004d.d101";
		reg = <28>;
		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
	};
};

&switch {
	status = "okay";

	switch_cpu_bmp = <0x1>;  /* cpu port bitmap */
	switch_lan_bmp = <0x3e>; /* lan port bitmap */
	switch_wan_bmp = <0x40>; /* wan port bitmap */
	switch_mac_mode = <0xb>; /* mac mode for uniphy instance0*/
	switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
	switch_mac_mode2 = <0xc>; /* mac mode for uniphy instance2*/
	bm_tick_mode = <0>; /* bm tick mode */
	tm_tick_mode = <0>; /* tm tick mode */

	qcom,port_phyinfo {
		port@0 {
			port_id = <1>;
			phy_address = <0>;
		};
		port@1 {
			port_id = <2>;
			phy_address = <1>;
		};
		port@2 {
			port_id = <3>;
			phy_address = <2>;
		};
		port@3 {
			port_id = <4>;
			phy_address = <3>;
		};
		port@5 {
			port_id = <6>;
			phy_address = <28>;
			port_mac_sel = "QGMAC_PORT";
		};
	};
};

&edma {
	status = "okay";
};

&dp1 {
	status = "okay";
	phy-handle = <&qca8075_0>;
	label = "lan4";
};

&dp2 {
	status = "okay";
	phy-handle = <&qca8075_1>;
	label = "lan3";
};

&dp3 {
	status = "okay";
	phy-handle = <&qca8075_2>;
	label = "lan2";
};

&dp4 {
	status = "okay";
	phy-handle = <&qca8075_3>;
	label = "lan1";
};

&dp6_syn {
	status = "okay";
	phy-handle = <&qca8081>;
	label = "wan";
};

&wifi {
	status = "okay";
	qcom,ath11k-calibration-variant = "Dynalink-DL-WRX36";
};