From 05b9b8d1035944af25694d2ebe53077cf1ccb067 Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@ti.com>
Date: Sat, 22 Feb 2014 16:53:40 +0100
Subject: [PATCH 117/182] ata: ahci_platform: Manage SATA PHY

Some platforms have a PHY hooked up to the SATA controller. The PHY
needs to be initialized and powered up for SATA to work. We do that
using the PHY framework.

tj: Minor comment formatting updates.

CC: Balaji T K <balajitk@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo<tj@kernel.org>
---
 drivers/ata/ahci.h          |    2 ++
 drivers/ata/ahci_platform.c |   47 +++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 47 insertions(+), 2 deletions(-)

--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,7 @@
 
 #include <linux/clk.h>
 #include <linux/libata.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 
 /* Enclosure Management Control */
@@ -326,6 +327,7 @@ struct ahci_host_priv {
 	u32			em_msg_type;	/* EM message type */
 	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
 	struct regulator	*target_pwr;	/* Optional */
+	struct phy		*phy;		/* If platform uses phy */
 	void			*plat_data;	/* Other platform data */
 	/*
 	 * Optional ahci_start_engine override, if not set this gets set to the
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/libata.h>
 #include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
 #include "ahci.h"
 
 static void ahci_host_stop(struct ata_host *host);
@@ -140,6 +141,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_
  * following order:
  * 1) Regulator
  * 2) Clocks (through ahci_platform_enable_clks)
+ * 3) Phy
  *
  * If resource enabling fails at any point the previous enabled resources
  * are disabled in reverse order.
@@ -161,8 +163,23 @@ int ahci_platform_enable_resources(struc
 	if (rc)
 		goto disable_regulator;
 
+	if (hpriv->phy) {
+		rc = phy_init(hpriv->phy);
+		if (rc)
+			goto disable_clks;
+
+		rc = phy_power_on(hpriv->phy);
+		if (rc) {
+			phy_exit(hpriv->phy);
+			goto disable_clks;
+		}
+	}
+
 	return 0;
 
+disable_clks:
+	ahci_platform_disable_clks(hpriv);
+
 disable_regulator:
 	if (hpriv->target_pwr)
 		regulator_disable(hpriv->target_pwr);
@@ -176,11 +193,17 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_r
  *
  * This function disables all ahci_platform managed resources in the
  * following order:
- * 1) Clocks (through ahci_platform_disable_clks)
- * 2) Regulator
+ * 1) Phy
+ * 2) Clocks (through ahci_platform_disable_clks)
+ * 3) Regulator
  */
 void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
 {
+	if (hpriv->phy) {
+		phy_power_off(hpriv->phy);
+		phy_exit(hpriv->phy);
+	}
+
 	ahci_platform_disable_clks(hpriv);
 
 	if (hpriv->target_pwr)
@@ -208,6 +231,7 @@ static void ahci_platform_put_resources(
  * 2) regulator for controlling the targets power (optional)
  * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
  *    or for non devicetree enabled platforms a single clock
+ *	4) phy (optional)
  *
  * RETURNS:
  * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
@@ -266,6 +290,25 @@ struct ahci_host_priv *ahci_platform_get
 		hpriv->clks[i] = clk;
 	}
 
+	hpriv->phy = devm_phy_get(dev, "sata-phy");
+	if (IS_ERR(hpriv->phy)) {
+		rc = PTR_ERR(hpriv->phy);
+		switch (rc) {
+		case -ENODEV:
+		case -ENOSYS:
+			/* continue normally */
+			hpriv->phy = NULL;
+			break;
+
+		case -EPROBE_DEFER:
+			goto err_out;
+
+		default:
+			dev_err(dev, "couldn't get sata-phy\n");
+			goto err_out;
+		}
+	}
+
 	devres_remove_group(dev, NULL);
 	return hpriv;