From b360514edb4743cbf86fc377699c75e98b1264c7 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Thu, 16 Jun 2022 02:18:33 +0200 Subject: [PATCH 1/2] mtd: nand: raw: qcom_nandc: reorder qcom_nand_host struct Reorder structs in nandc driver to save holes. Signed-off-by: Christian Marangi Reviewed-by: Manivannan Sadhasivam Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220616001835.24393-2-ansuelsmth@gmail.com --- drivers/mtd/nand/raw/qcom_nandc.c | 107 +++++++++++++++++------------- 1 file changed, 62 insertions(+), 45 deletions(-) --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -237,6 +237,9 @@ nandc_set_reg(chip, reg, \ * @bam_ce - the array of BAM command elements * @cmd_sgl - sgl for NAND BAM command pipe * @data_sgl - sgl for NAND BAM consumer/producer pipe + * @last_data_desc - last DMA desc in data channel (tx/rx). + * @last_cmd_desc - last DMA desc in command channel. + * @txn_done - completion for NAND transfer. * @bam_ce_pos - the index in bam_ce which is available for next sgl * @bam_ce_start - the index in bam_ce which marks the start position ce * for current sgl. It will be used for size calculation @@ -249,14 +252,14 @@ nandc_set_reg(chip, reg, \ * @rx_sgl_start - start index in data sgl for rx. * @wait_second_completion - wait for second DMA desc completion before making * the NAND transfer completion. - * @txn_done - completion for NAND transfer. - * @last_data_desc - last DMA desc in data channel (tx/rx). - * @last_cmd_desc - last DMA desc in command channel. */ struct bam_transaction { struct bam_cmd_element *bam_ce; struct scatterlist *cmd_sgl; struct scatterlist *data_sgl; + struct dma_async_tx_descriptor *last_data_desc; + struct dma_async_tx_descriptor *last_cmd_desc; + struct completion txn_done; u32 bam_ce_pos; u32 bam_ce_start; u32 cmd_sgl_pos; @@ -266,25 +269,23 @@ struct bam_transaction { u32 rx_sgl_pos; u32 rx_sgl_start; bool wait_second_completion; - struct completion txn_done; - struct dma_async_tx_descriptor *last_data_desc; - struct dma_async_tx_descriptor *last_cmd_desc; }; /* * This data type corresponds to the nand dma descriptor + * @dma_desc - low level DMA engine descriptor * @list - list for desc_info - * @dir - DMA transfer direction + * * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by * ADM * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM - * @dma_desc - low level DMA engine descriptor + * @dir - DMA transfer direction */ struct desc_info { + struct dma_async_tx_descriptor *dma_desc; struct list_head node; - enum dma_data_direction dir; union { struct scatterlist adm_sgl; struct { @@ -292,7 +293,7 @@ struct desc_info { int sgl_cnt; }; }; - struct dma_async_tx_descriptor *dma_desc; + enum dma_data_direction dir; }; /* @@ -336,52 +337,64 @@ struct nandc_regs { /* * NAND controller data struct * - * @controller: base controller structure - * @host_list: list containing all the chips attached to the - * controller * @dev: parent device + * * @base: MMIO base - * @base_phys: physical base address of controller registers - * @base_dma: dma base address of controller registers + * * @core_clk: controller clock * @aon_clk: another controller clock * + * @regs: a contiguous chunk of memory for DMA register + * writes. contains the register values to be + * written to controller + * + * @props: properties of current NAND controller, + * initialized via DT match data + * + * @controller: base controller structure + * @host_list: list containing all the chips attached to the + * controller + * * @chan: dma channel * @cmd_crci: ADM DMA CRCI for command flow control * @data_crci: ADM DMA CRCI for data flow control + * * @desc_list: DMA descriptor list (list of desc_infos) * * @data_buffer: our local DMA buffer for page read/writes, * used when we can't use the buffer provided * by upper layers directly - * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf - * functions * @reg_read_buf: local buffer for reading back registers via DMA + * + * @base_phys: physical base address of controller registers + * @base_dma: dma base address of controller registers * @reg_read_dma: contains dma address for register read buffer - * @reg_read_pos: marker for data read in reg_read_buf * - * @regs: a contiguous chunk of memory for DMA register - * writes. contains the register values to be - * written to controller - * @cmd1/vld: some fixed controller register values - * @props: properties of current NAND controller, - * initialized via DT match data + * @buf_size/count/start: markers for chip->legacy.read_buf/write_buf + * functions * @max_cwperpage: maximum QPIC codewords required. calculated * from all connected NAND devices pagesize + * + * @reg_read_pos: marker for data read in reg_read_buf + * + * @cmd1/vld: some fixed controller register values */ struct qcom_nand_controller { - struct nand_controller controller; - struct list_head host_list; - struct device *dev; void __iomem *base; - phys_addr_t base_phys; - dma_addr_t base_dma; struct clk *core_clk; struct clk *aon_clk; + struct nandc_regs *regs; + struct bam_transaction *bam_txn; + + const struct qcom_nandc_props *props; + + struct nand_controller controller; + struct list_head host_list; + union { /* will be used only by QPIC for BAM DMA */ struct { @@ -399,22 +412,22 @@ struct qcom_nand_controller { }; struct list_head desc_list; - struct bam_transaction *bam_txn; u8 *data_buffer; + __le32 *reg_read_buf; + + phys_addr_t base_phys; + dma_addr_t base_dma; + dma_addr_t reg_read_dma; + int buf_size; int buf_count; int buf_start; unsigned int max_cwperpage; - __le32 *reg_read_buf; - dma_addr_t reg_read_dma; int reg_read_pos; - struct nandc_regs *regs; - u32 cmd1, vld; - const struct qcom_nandc_props *props; }; /* @@ -430,19 +443,21 @@ struct qcom_nand_controller { * and reserved bytes * @cw_data: the number of bytes within a codeword protected * by ECC - * @use_ecc: request the controller to use ECC for the - * upcoming read/write - * @bch_enabled: flag to tell whether BCH ECC mode is used * @ecc_bytes_hw: ECC bytes used by controller hardware for this * chip - * @status: value to be returned if NAND_CMD_STATUS command - * is executed + * * @last_command: keeps track of last command on this chip. used * for reading correct status * * @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for * ecc/non-ecc mode for the current nand flash * device + * + * @status: value to be returned if NAND_CMD_STATUS command + * is executed + * @use_ecc: request the controller to use ECC for the + * upcoming read/write + * @bch_enabled: flag to tell whether BCH ECC mode is used */ struct qcom_nand_host { struct nand_chip chip; @@ -451,12 +466,10 @@ struct qcom_nand_host { int cs; int cw_size; int cw_data; - bool use_ecc; - bool bch_enabled; int ecc_bytes_hw; int spare_bytes; int bbm_size; - u8 status; + int last_command; u32 cfg0, cfg1; @@ -465,23 +478,27 @@ struct qcom_nand_host { u32 ecc_bch_cfg; u32 clrflashstatus; u32 clrreadstatus; + + u8 status; + bool use_ecc; + bool bch_enabled; }; /* * This data type corresponds to the NAND controller properties which varies * among different NAND controllers. * @ecc_modes - ecc mode for NAND + * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset * @is_bam - whether NAND controller is using BAM * @is_qpic - whether NAND CTRL is part of qpic IP * @qpic_v2 - flag to indicate QPIC IP version 2 - * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset */ struct qcom_nandc_props { u32 ecc_modes; + u32 dev_cmd_reg_start; bool is_bam; bool is_qpic; bool qpic_v2; - u32 dev_cmd_reg_start; }; /* Frees the BAM transaction memory */