From 02bbf3c46e1e38e9ca699143566903683e3a015d Mon Sep 17 00:00:00 2001
From: Ram Chandra Jangir <rjangir@codeaurora.org>
Date: Thu, 20 Apr 2017 10:45:00 +0530
Subject: [PATCH] dts: ipq4019: add nand and qpic bam dma node
This change adds QPIC BAM dma and NAND driver node's in
IPQ4019 device tree, also enable this for AP-DK04.1 based
boards.
Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 75 +++++++++++++++++++++++++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 38 ++++++++++++++
2 files changed, 113 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -88,6 +88,86 @@
bias-disable;
};
};
+
+ nand_pins: nand_pins {
+
+ mux_1 {
+ pins = "gpio52", "gpio53", "gpio54",
+ "gpio55", "gpio56", "gpio61",
+ "gpio62", "gpio63", "gpio69";
+ function = "qpic_pad";
+ bias-disable;
+ };
+
+ mux_2 {
+ pins = "gpio67";
+ function = "qpic_pad0";
+ bias-disable;
+ };
+
+ mux_3 {
+ pins = "gpio64";
+ function = "qpic_pad1";
+ bias-disable;
+ };
+
+ mux_4 {
+ pins = "gpio65";
+ function = "qpic_pad2";
+ bias-disable;
+ };
+
+ mux_5 {
+ pins = "gpio66";
+ function = "qpic_pad3";
+ bias-disable;
+ };
+
+ mux_6 {
+ pins = "gpio57";
+ function = "qpic_pad4";
+ bias-disable;
+ };
+
+ mux_7 {
+ pins = "gpio58";
+ function = "qpic_pad5";
+ bias-disable;
+ };
+
+ mux_8 {
+ pins = "gpio59";
+ function = "qpic_pad6";
+ bias-disable;
+ };
+
+ mux_9 {
+ pins = "gpio60";
+ function = "qpic_pad7";
+ bias-disable;
+ };
+
+ mux_10 {
+ pins = "gpio68";
+ function = "qpic_pad8";
+ bias-disable;
+ };
+
+ pullups {
+ pins = "gpio52", "gpio53", "gpio58",
+ "gpio59";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ bias-pull-down;
+ };
+ };
};
blsp_dma: dma@7884000 {
@@ -159,5 +239,15 @@
watchdog@b017000 {
status = "ok";
};
+
+ qpic_bam: dma@7984000 {
+ status = "ok";
+ };
+
+ nand: qpic-nand@79b0000 {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
};
};
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -586,5 +586,43 @@
"legacy";
status = "disabled";
};
+
+ qpic_bam: dma@7984000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x7984000 0x1a000>;
+ interrupts = <0 101 0>;
+ clocks = <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ status = "disabled";
+ };
+
+ nand: qpic-nand@79b0000 {
+ compatible = "qcom,ebi2-nandc-bam", "qcom,msm-nand";
+ reg = <0x79b0000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&gcc GCC_QPIC_CLK>,
+ <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&qpic_bam 0>,
+ <&qpic_bam 1>,
+ <&qpic_bam 2>;
+ dma-names = "tx", "rx", "cmd";
+ status = "disabled";
+
+ nandcs@0 {
+ compatible = "qcom,nandcs";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ };
+ };
};
};