/target/linux/ipq806x/patches-4.4/

• ../
• 001-add-API-register-brd-clks-bckwrds-cmptblt.patch
• 002-make-reset-control-ops-const.patch
• 003-mv-cxo-pxo-xo-into-DT.patch
• 005-mfd-qcom_rpm-Add-missing-of_node_put-after-calling-of_parse_phandle.patch
• 006-mfd-qcom_rpm-Handle-message-RAM-clock.patch
• 009-1-watchdog-core-add-restart-handler-support.patch
• 009-2-watchdog-core-add-reboot-notifier-support.patch
• 009-3-watchdog-Use-static-struct-class-watchdog_class-instead-of-pointer.patch
• 009-4-watchdog-Read-device-status-through-sysfs-attributes.patch
• 009-5-watchdog-Create-watchdog-device-in-watchdog_dev-c.patch
• 009-6-watchdog-Separate-and-maintain-variables-based-on-variable-lifetime.patch
• 009-7-watchdog-Drop-pointer-to-watchdog-device-from-struct-watchdog_device.patch
• 009-8-watchdog-kill-unref-ref-ops.patch
• 010-1-qcom-wdt-use-core-restart-handler.patch
• 010-2-qcom-wdt-Do-not-set-dev-in-struct-watchdog_device.patch
• 010-3-watchdog-Add-action-and-data-parameters-to-restart-handler-callback.patch
• 010-4-watchdog-qcom-Report-reboot-reason.patch
• 010-5-watchdog-qcom-add-option-for-standalone-watchdog-not-in-timer-block.patch
• 010-6-watchdog-qcom-configure-BARK-time-in-addition-to-BITE-time.patch
• 011-1-fix-bld-errs-hwmon-sch56xx-Drop-watchdog-driver-data-reference-count-callbacks.patch
• 011-2-fix-bld-errs-watchdog-da9052_wdt-Drop-reference-counting.patch
• 011-3-fix-bld-errs-watchdog-da9055_wdt-Drop-reference-counting.patch
• 012-1-clk-qcom-Add-support-for-SMD-RPM-Clocks.patch
• 012-2-clk-qcom-Add-support-for-RPM-Clocks.patch
• 012-3-clk-qcom-clk-rpm-Fix-clk_hw-references.patch
• 020-add-ap148-bootargs.patch
• 021-add-ap148-partitions.patch
• 022-add-db149-dts.patch
• 023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
• 024-ap148-add-memory-node.patch
• 030-ARM-qcom-select-ARM_CPU_SUSPEND-for-power-management.patch
• 033-ARM-qcom-add-SFPB-nodes-to-IPQ806x-dts.patch
• 036-ARM-qcom-add-SMEM-device-node-to-IPQ806x-dts.patch
• 037-mtd-add-SMEM-parser-for-QCOM-platforms.patch
• 096-01-usb-dwc3-core-purge-dev_dbg-calls.patch
• 096-02-usb-dwc3-Update-maximum_speed-for-SuperSpeedPlus.patch
• 096-03-usb-dwc3-Validate-the-maximum_speed-parameter.patch
• 096-04-usb-dwc3-DWC_usb31-controller-check.patch
• 096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch
• 096-06-usb-dwc3-core-improve-reset-sequence.patch
• 096-07-usb-dwc3-drop-FIFO-resizing-logic.patch
• 096-08-usb-dwc3-remove-num_event_buffers.patch
• 096-09-usb-dwc3-drop-ev_buffs-array.patch
• 096-10-usb-dwc3-core-fix-PHY-handling-during-suspend.patch
• 097-1-usb-dwc3-add-generic-OF-glue-layer.patch
• 097-2-usb-dwc3-of-simple-fix-build-warning-on-PM.patch
• 097-3-usb-dwc3-Remove-impossible-check-for-of_clk_get_pare.patch
• 097-4-usb-dwc3-fix-missing-platform_set_drvdata-in-dwc3_of_simple_probe.patch
• 100-usb-phy-Add-Qualcomm-DWC3-HS-SS-PHY-drivers.patch
• 101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
• 110-DT-PCI-qcom-Document-PCIe-devicetree-bindings.patch
• 111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch
• 112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
• 113-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
• 114-pcie-add-ctlr-init.patch
• 115-add-pcie-aux-clk-dts.patch
• 126-add-rpm-to-ipq8064-dts.patch
• 133-ARM-Add-Krait-L2-register-accessor-functions.patch
• 134-clk-mux-Split-out-register-accessors-for-reuse.patch
• 135-clk-Avoid-sending-high-rates-to-downstream-clocks-du.patch
• 136-clk-Add-safe-switch-hook.patch
• 137-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
• 138-clk-qcom-Add-HFPLL-driver.patch
• 139-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
• 140-clk-qcom-Add-support-for-Krait-clocks.patch
• 141-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
• 142-clk-qcom-Add-Krait-clock-controller-driver.patch
• 143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
• 144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
• 155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
• 156-dmaengine-Add-ADM-driver.patch
• 157-ARM-DT-ipq8064-Add-ADM-device-node.patch
• 161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch
• 162-mtd-nand-Qualcomm-NAND-controller-driver.patch
• 163-dt-bindings-qcom_nandc-Add-DT-bindings.patch
• 164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
• 165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
• 166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch
• 167-ARM-qcom_rpm_fix_support_for_smb208.patch
• 168-ARM-qcom-add-smb208-DT.patch
• 169-OPP-Support-adjusting-OPP-voltages-at-runtime.patch
• 170-OPP-Allow-notifiers-to-call-dev_pm_opp_get_voltage-freq-RCU-free.patch
• 172-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch
• 173-cpufreq-dt-Add-L2-frequency-scaling-support.patch
• 174-cpufreq-dt-Add-missing-rcu_read_lock-for-find_device_opp.patch
• 175-add-regmap-mux-div.patch
• 180-clk-qcom-Always-add-factor-clock-for-xo-clocks.patch
• 181-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch
• 300-arch-arm-force-ZRELADDR-on-arch-qcom.patch
• 302-mtd-qcom-smem-rename-rootfs-ubi.patch
• 303-add-saw_l2-and-sns-into-ipq8064-DT.patch
• 304-add-cpu-idle-state-into-ipq8064-DT.patch
• 305-add-board-clocks-and-rpmcc-into-DT.patch
• 306-add-RPM-msg-RAM-into-DT.patch
• 311-add-rpmcc-for-ipq806x.patch
• 400-dsa-add-qca.patch
• 707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
• 708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
• 709-spi-qup-Fix-fifo-and-dma-support-for-IPQ806x.patch
• 710-spi-qup-Make-sure-mode-is-only-determined-once.patch
• 711-spi-qup-Fix-transaction-done-signaling.patch
• 711-stmmac-fix-ipq806x-DMA-configuration.patch
• 712-spi-qup-Fix-DMA-mode-to-work-correctly.patch
• 713-spi-qup-Fix-block-mode-to-work-correctly.patch
• 714-spi-qup-properly-detect-extra-interrupts.patch
• 715-spi-qup-don-t-re-read-opflags-to-see-if-transaction-.patch
• 800-devicetree.patch
• 801-override-compiler-flags.patch
• 802-GPIO-add-named-gpio-exports.patch
• 996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch