Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [v3,3/5] dt/bindings: qcom_nandc: Add DT bindings From: Archit Taneja X-Patchwork-Id: 6927141 Message-Id: <1438578498-32254-4-git-send-email-architt@codeaurora.org> To: linux-mtd@lists.infradead.org, dehrenberg@google.com, cernekee@gmail.com, computersforpeace@gmail.com Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org, sboyd@codeaurora.org, linux-kernel@vger.kernel.org, Archit Taneja , devicetree@vger.kernel.org Date: Mon, 3 Aug 2015 10:38:16 +0530 Add DT bindings document for the Qualcomm NAND controller driver. Cc: devicetree@vger.kernel.org v3: - Don't use '0x' when specifying nand controller address space - Add optional property for on-flash bbt usage Acked-by: Andy Gross Signed-off-by: Archit Taneja --- .../devicetree/bindings/mtd/qcom_nandc.txt | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt @@ -0,0 +1,49 @@ +* Qualcomm NAND controller + +Required properties: +- compatible: should be "qcom,ebi2-nand" for IPQ806x +- reg: MMIO address range +- clocks: must contain core clock and always on clock +- clock-names: must contain "core" for the core clock and "aon" for the + always on clock +- dmas: DMA specifier, consisting of a phandle to the ADM DMA + controller node and the channel number to be used for + NAND. Refer to dma.txt and qcom_adm.txt for more details +- dma-names: must be "rxtx" +- qcom,cmd-crci: must contain the ADM command type CRCI block instance + number specified for the NAND controller on the given + platform +- qcom,data-crci: must contain the ADM data type CRCI block instance + number specified for the NAND controller on the given + platform + +Optional properties: +- nand-bus-width: bus width. Must be 8 or 16. If not present, 8 is chosen + as default + +- nand-ecc-strength: number of bits to correct per ECC step. Must be 4 or 8 + bits. If not present, 4 is chosen as default +- nand-on-flash-bbt: Create/use on-flash bad block table + +The device tree may optionally contain sub-nodes describing partitions of the +address space. See partition.txt for more detail. + +Example: + +nand@1ac00000 { + compatible = "qcom,ebi2-nandc"; + reg = <0x1ac00000 0x800>; + + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; + + dmas = <&adm_dma 3>; + dma-names = "rxtx"; + qcom,cmd-crci = <15>; + qcom,data-crci = <3>; + + partition@0 { + ... + }; +};